buy & sell, new & used machinery, machine tools & equipment

Machine Tools

Machine Tools For Sale

17522 new & used machine tools items for sale
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 1 - 100 of 17522 matches
Sort by:
Items Per Page:  20 |  50 |  100
MORI SEIKI, SL603C/2000, 82" SWING, NEW: 2007
$RFQ
MORI SEIKI, SL603C/2000, 82" SWING, NEW: 2007
SPECIFICATIONS: X - AXIS TRAVEL: 19.1" Z - AXIS TRAVEL: 84.6" SPINDLE SPEED: 1,500 RPM SPINDLE MOTOR: 60 HP SPINDLE NOSE: A1-20 SPINDLE BORE DIAMETER: 10.2" DIST. BETWEEN CENTERS: 90.6" MAX
  • Swing: 82"
    AMADA, LC3015 F1 NT, 4000 WATT, CO2, AMNC CNTRL, NEW: 2011
    $RFQ
    AMADA, LC3015 F1 NT, 4000 WATT, CO2, AMNC CNTRL, NEW: 2011
    SPECIFICATIONS: MAXIMUM LASER OUTPUT: 4,000 WATTS MACHINE TYPE: FLYING OPTIC DRIVE MOTORS: LINEAR MAXIMUM SHEET SIZE: 5' x 10' MAXIMUM AXIS TRAVEL: Y-AXIS: 61" X-AXIS: 121" Z-AXIS: 3.94"
    • Wattage: 4000W
      MORI SEIKI, SH8000, 51.2" X, 47.1" Y, 43.3" Z, NEW: 2001
      $RFQ
      MORI SEIKI, SH8000, 51.2" X, 47.1" Y, 43.3" Z, NEW: 2001
      SPECIFICATIONS: TRAVELS: --X: 51.2" --Y: 47.2" --Z: 43.3" PALLET SIZE: 31.5" x 31.5" NUMBER OF PALLETS: 2 TABLE LOAD CAPACITY: 4,400 LBS TABLE INDEXING TIME: 3.4 SEC TABLE SURFACE TO
      • X axis: 51.2"
      • Y axis: 47.2"
        MORI SEIKI, SH633, 33.07" X, 29.07" Y, 33.07" Z, NEW: 2001
        $RFQ
        MORI SEIKI, SH633, 33.07" X, 29.07" Y, 33.07" Z, NEW: 2001
        SPECIFICATIONS: TRAVELS: --X: 33.07" --Y: 29.07" --Z: 33.07" --B: .001 FULL 4TH PALLET SIZE: 24.8" x 24.8" TABLE LOAD CAPACITY: 2640 LBS SPINDLE TAPER: #50 SPINDLE SPEEDS: 10,000 RPM
        • X axis: 33.07"
        • Y axis: 29.07"
          MORI SEIKI, NHX4000, 22" X, 22" Y, 26" Z, NEW: 2015
          $RFQ
          MORI SEIKI, NHX4000, 22" X, 22" Y, 26" Z, NEW: 2015
          SPECIFICATIONS: TRAVELS: --X: 22" --Y: 22" --Z: 26" PALLET SIZE / NUMBER OF PALLETS: 15.7" x 15.7" / 2 PLTS. TABLE INDEXING: .001 DEGREE ROTARY TABLE LOAD CAPACITY: 880 LBS. SPINDLE S
          • X axis: 22"
          • Y axis: 22"
            MORI SEIKI, DV5100, 41.5" X, 20.9" Y, 20.1" Z, NEW: 2014
            $RFQ
            MORI SEIKI, DV5100, 41.5" X, 20.9" Y, 20.1" Z, NEW: 2014
            SPECIFICATIONS: TRAVELS: --X: 41.5" --Y: 20.9" --Z: 20.1" TAPER: 40 SPINDLE SPEEDS 12000 RPM RPM: 12,000 RPM POWER: 25/20 HP TABLE: L: 23.6" x W: 53.1" DIMENSIONS: L: 107" x W:
            • X axis: 41.5"
            • Y axis: 20.9"
              MORI SEIKI, NL1500SY, 6" Chk, SUB SPINDLE Y-AXIS MILLING, NEW: 2013
              $RFQ
              MORI SEIKI, NL1500SY, 6" Chk, SUB SPINDLE Y-AXIS MILLING, NEW: 2013
              SPECIFICATIONS: MAX. TURNING DIAMETER: 15.1" MAX. TURNING LENGTH: 20.2" BAR WORK CAPACITY: 2" TRAVELS: X-AXIS: 10.2" Y-AXIS: 3.9" (+/- 2) Z-AXIS (TYPE 500): 23.2" MAIN SPINDLE:
              1998 Mori Seiki SH-630
              $RFQ
              1998 Mori Seiki SH-630
              1998 Mori Seiki SH-630 MSC-516 Control 60 ATC 1 Degree Indexing High PSI Coolant Through the Spindle
              • X axis: 33.1"
              • Y axis: 29.9"
                2015 Takisawa TCN-3500 L5 with 4.25" Bar Capacity
                $RFQ
                2015 Takisawa TCN-3500 L5 with 4.25" Bar Capacity
                2015 Takisawa TCN-3500 L5 with 4.25" Bar Capacity Fanuc 0iTD Control 15" Kitagawa Chuck Chip Conveyor Tailstock Box Ways Front Door Interlock Spindle Orientation
                • Centers: 20.07"
                  2013 DMG Mori Seiki NLX-2500SY / 700
                  $RFQ
                  2013 DMG Mori Seiki NLX-2500SY / 700
                  2013 DMG Mori Seiki NLX-2500SY / 700 Mitsubishi M-730BM Control 10" Chuck (Main) 6" Chuck (Sub) Tool Presetter Sub-Spindle Y-Axis LNS Bar Feed Chip Conveyor High PSI Coolant Interface Pneumatic door c
                  • Swing: 23.2"
                  • Centers: 28.6"
                    2007 Brother TC32B FT (Fixed Table)
                    $RFQ
                    2007 Brother TC32B FT (Fixed Table)
                    2007 Brother TC32B FT (Fixed Table) CNC B00 Control New Cost was over $140k
                    • X axis: 21.7"
                    • Y axis: 15.7"
                      2016 Brother Speedio R650X1 CNC Drilling & Tapping Center
                      $RFQ
                      2016 Brother Speedio R650X1 CNC Drilling & Tapping Center
                      2016 Brother Speedio R650X1 CNC Drilling & Tapping Center Brother CNC-C00 CNC Control 10,000 RPM Spindle 22 Position ATC Rigid Tap Remote Jog Handle Coolant Tank & Pump
                      • X axis: 25.6"
                      • Y axis: 15.7"
                        1994 Kitamura Mycenter 3X CNC Vertical Machining Center
                        $19,900
                        1994 Kitamura Mycenter 3X CNC Vertical Machining Center
                        Table Size .......................................................................... 35.4” x 16.1” Table Load (max) ................................................................... 1,100 LBS. X-Axis Travels .......
                        • X axis: 29.9"
                        • Y axis: 17.9"
                          DOOSAN PUMA 240LC, 2005, 10" CHUCK, 3" BAR CAPACITY, TAILSTOCK, B
                          $RFQ
                          DOOSAN PUMA 240LC, 2005, 10" CHUCK, 3" BAR CAPACITY, TAILSTOCK, B
                          DOOSAN PUMA 240LC NEW: 2005 SPECIFICATIONS: MAXIMUM SWING................... 21.7" MAX CUTTING DIAMETER............ 13.9" MAX CUTTING LENGTH.............. 22" DISTANCE BETWEEN CENTERS........ 26.
                          • Swing: 21.7"
                          • Centers: 26.3"
                            Trumpf # TRULASER-STATION-5005 , 1000 watt, 5-Axis, 11.81" X, 11.81" Y, 19.68&qu
                            $RFQ
                            Trumpf # TRULASER-STATION-5005 , 1000 watt, 5-Axis, 11.81" X, 11.81" Y, 19.68&qu
                            no description provided
                            DAEWOO DOOSAN MYNX 540 VERTICAL MACHINING CENTER
                            $29,700
                            DAEWOO DOOSAN MYNX 540 VERTICAL MACHINING CENTER
                            Make: Daewoo Model No.: Mynx 540 Serial No.: AV5E01029 Year : 2002 Condition: Very Good Cutting Hours: 21069 All specifications are approximations, and are subject to verification. “10,000 RPM Machine on our F
                            • X axis: 40.2"
                            • Y axis: 20"
                              HARDINGE VMC-1000II VERTICAL MACHINING CENTER
                              $27,000
                              HARDINGE VMC-1000II VERTICAL MACHINING CENTER
                              Make: Hardinge Model No.: VMC-100II Serial No.: NVCA2C0075 Year : 2002.07 Condition: Excellent Cutting Hours: 8459 All specifications are approximations, and are subject to verification. “One Owner, All origin
                              • X axis: 40.16"
                              • Y axis: 20.08"
                                HARDINGE BRIDGEPORT XV710 CNC VERTICAL MACHINING CENTER
                                $RFQ
                                HARDINGE BRIDGEPORT XV710 CNC VERTICAL MACHINING CENTER
                                HARDINGE BRIDGEPORT XV710 CNC VERTICAL MACHINING CENTER Serial No. 070046WM New 2007 EQUIPPED WITH Fanuc 0i-MC CNC Controls Remote MPG Full Enclosure RS232 Port Auto Lucubration Data (RJ45) Port SPEC
                                63" You Ji YV-1600 ATC CNC Vertical Boring Mill
                                $RFQ
                                63" You Ji YV-1600 ATC CNC Vertical Boring Mill
                                Reference #30374 63" YOU JI YV-1600ATC CNC Vertical Boring Mill Age: 2006 FEATURES: Fanuc Oi-TC CNC Control Ram with 12-Position ATC CAPACITY: Table Diameter ........................ 62.99" Max
                                • Swing: 78.74"
                                  Niagra 10 ft by 14 Gauge Mild steel Shear with 60" squaring arm
                                  $11,500
                                  Niagra 10 ft by 14 Gauge Mild steel Shear with 60" squaring arm
                                  Niagra 10 ft by 14 gauge mild steel shear, 16 gauge stainless, or 12 gauge aluminum, 2 HP 208 3 phase power, new electrics 2019, manual 24" back gauge, 85 cycles per minute, recent new blades, new 1962, excellent co
                                  • Maximum thickness: 14Ga
                                    88 Ton x 8' Amada, Model HFE-80-25s, Amada Operateur 8-Axis CNC Control
                                    $RFQ
                                    88 Ton x 8' Amada, Model HFE-80-25s, Amada Operateur 8-Axis CNC Control
                                    88 TON X 8' AMADA HYDRAULIC PRESS BRAKE Model HFE-80-25S, S/N V010426, New 2001 Stock # K15724 EQUIPPED WITH: Amada Operateur 8-Axis CNC Control, CNC Ram Con
                                    • Tonnage: 88T
                                      320 Ton x 14' Accurpress,Hydraulic,Model 732014,168" Bending Lengt
                                      $RFQ
                                      320 Ton x 14' Accurpress,Hydraulic,Model 732014,168" Bending Lengt
                                      320 TON X 14' ACCURPRESS HYDRAULIC PRESS BRAKE Model 732014, S/N 2654, New 08/1994 Stock # K15705 EQUIPPED WITH: Remote Foot Pedal Operator Station, Full
                                      • Tonnage: 320T
                                        DOOSAN PUMA 2600M, 2011, LIVE MILLING, 10" CHUCK, 3" BAR CAPACITY
                                        $RFQ
                                        DOOSAN PUMA 2600M, 2011, LIVE MILLING, 10" CHUCK, 3" BAR CAPACITY
                                        SPECIFICATIONS: SWING OVER BED............... 30.7" SWING OVER SADDLE............ 24.8" MAX CUTTING DIAMETER......... 14.8" MAX CUTTING LENGTH........... 29.9" BAR CAPACITY................. 3&q
                                        • Swing: 30.7"
                                          Haas VF-5/40XT CNC Vertical Machining Center
                                          $RFQ
                                          Haas VF-5/40XT CNC Vertical Machining Center
                                          Reference #30424 Haas VF-5/40XT CNC Vertical Machining Center FEATURES: Haas CNC Control 30 HP High Torque Spindle Motor 40-Station Automatic Tool Changer CAPACITY: X-Axis Travel .........................
                                          • X axis: 60"
                                          • Y axis: 26"
                                            OKK HM-80S CNC Horizontal Machining Center
                                            $RFQ
                                            OKK HM-80S CNC Horizontal Machining Center
                                            Reference #30423 OKK HM-80S CNC Horizontal Machining Center FEATURES: Fanuc 16i-M CNC Control 60-Station Automatic Tool Changer 2-Station Automatic Pallet Changer .001 Degree Table Indexing CAPACITY: X-Axis
                                            • X axis: 39"
                                            • Y axis: 33"
                                              110 Ton x 13' (4000mm) Promecam Model RG-104 Hydraulic Upacting Press B
                                              $RFQ
                                              110 Ton x 13' (4000mm) Promecam Model RG-104 Hydraulic Upacting Press B
                                              Serial No. 3210040628 Age: 1986 Tonnage 110 Length 13'4" Bending Length 13'5" Distance between Housings 12'1" Air Bending Capacity Mild Steel Length 12' Thickness 11 Ga Vee
                                              • Tonnage: 110T
                                                Mori Seiki SH-500 CNC Horizontal Machining Center
                                                $RFQ
                                                Mori Seiki SH-500 CNC Horizontal Machining Center
                                                Reference #30422 Mori Seiki SH-500 CNC Horizontal Machining Center FEATURES: Mori Seiki MSC-516 CNC Control 40-Station Automatic Tool Changer 12,000 RPM Spindle CAPACITY: X-Axis Travel ......................
                                                • X axis: 24"
                                                • Y axis: 23"
                                                  Haas VF-2 CNC Vertical Machining Center
                                                  $RFQ
                                                  Haas VF-2 CNC Vertical Machining Center
                                                  Reference #30421 Haas VF-2 CNC Vertical Machining Center FEATURES: Haas CNC Control 20-Station Automatic Tool Changer Coolant Brushless Servo Chip Auger CAPACITY: X-Axis Travel ......................... 30
                                                  • X axis: 30"
                                                  • Y axis: 16"
                                                    Haas TR160/2 2-Axis CNC Trunnion Style Rotary Table
                                                    $RFQ
                                                    Haas TR160/2 2-Axis CNC Trunnion Style Rotary Table
                                                    Reference #30420 Haas TR160/2 2-Axis CNC Trunnion Style Rotary Table FEATURES: 2-6.3" Diameter Platens A-Axis Tilt B-Axis Rotation CAPACITY: Platten Diameter ...................... 6.3" Max. Par
                                                    • Work surface diameter: 6.3"
                                                      Acer Ultima Ram Type Vertical Milling Machine
                                                      $RFQ
                                                      Acer Ultima Ram Type Vertical Milling Machine
                                                      Reference #30419 Acer Ultima Ram Type Vertical Milling Machine CAPACITY: Table Size ............................ 10" x 50" Longitudinal Table Travel ............. 36" Cross Travel ................
                                                      • Table width: 10"
                                                      • Table length: 50"
                                                        DARLEY EHP 110 31/25 110 Ton x 10' 4-Axis CNC Hydraulic Press Brake
                                                        $RFQ
                                                        DARLEY EHP 110 31/25 110 Ton x 10' 4-Axis CNC Hydraulic Press Brake
                                                        Reference #30396 DARLEY EHP 110 31/25 110 Ton x 10' 4-Axis CNC Hydraulic Press Brake FEATURES: Retrofitted With Delem DA65R 4-Axis CNC Control in 2015 Laser Guards Installed 2015 New Proportional Valves 2015
                                                        • Tonnage: 110T
                                                          Bystronic 4400 Watt Bystar 4025 Flying Optic CNC Laser
                                                          $RFQ
                                                          Bystronic 4400 Watt Bystar 4025 Flying Optic CNC Laser
                                                          Reference #29954 Bystronic 4400 Watt Bystar 4025 Flying Optic CNC Laser Age: 2003 Model: Bystar 4025 Maximum Laser Output .................. 4400 Watts Nominal Sheet Size .................... 256" x 100&quo
                                                          • Wattage: 4400W
                                                          • X axis travel: 256'
                                                            175 Ton x 144" ACCURPRESS 717512 5 Axis Advantage Hydraulic , 2004
                                                            $RFQ
                                                            175 Ton x 144" ACCURPRESS 717512 5 Axis Advantage Hydraulic , 2004
                                                            Manufacturer: ACCURPRESS Model: 717512 Year: 2004 Condition: Very Good Specifications: Capacity-----------------------------175 Ton Length of Bed-----------------------144" Distance Between Housing---------1
                                                            • Tonnage: 175T
                                                              OKUMA CAPTAIN L370 780-S CNC TURNING CENTER
                                                              $27,000
                                                              OKUMA CAPTAIN L370 780-S CNC TURNING CENTER
                                                              Make: Okuma Model No.: Captain L370 / 780-SB Serial No.: 0019 Year: 2001 Condition: Excellent Cutting Hours : 12054 All specifications are approximations, and are subject to verification. “This machine is in v
                                                              • Swing: 21.65"
                                                              • Centers: 22.29"
                                                                Bystronic Bysprint 2200 Watt Flying Optic Laser
                                                                $RFQ
                                                                Bystronic Bysprint 2200 Watt Flying Optic Laser
                                                                Reference #30068 Bystronic Bysprint 3015 2200 Watt Flying Optic Laser with load/unload Age: 2007 CAPACITY: Maximum Laser Output .................. 2200 Watts X-Axis Travel ......................... 120" Y-
                                                                • Wattage: 2200W
                                                                • X axis travel: 120'
                                                                  QUICKTECH T8-M CNC TURN MILL LATHE
                                                                  $55,800
                                                                  QUICKTECH T8-M CNC TURN MILL LATHE
                                                                  Make: Quick-Tech Model No.: T8-M Twin Serial No.: 4186 Year: 2017 Condition: New ( Demo Model ) Comes with Collet Chuck, Tool Holders, Tailstock, parts & Chip Conveyor All specifications are approximations, a
                                                                  • Swing: 20"
                                                                  • Centers: 13.2"
                                                                    MORI SEIKI SL-25B CNC TURNING CENTER
                                                                    $25,200
                                                                    MORI SEIKI SL-25B CNC TURNING CENTER
                                                                    Make: Mori Seiki Model No.: SL-25B Serial No.: 7199 Condition: Very Good Cutting Hours: 3390 All specifications are approximations, and are subject to verification. “This machine is in very Good running conditi
                                                                    • Swing: 22.4"
                                                                    • Centers: 24.6"
                                                                      1997 SMW Space Saver 2000 Magazine Barfeeder
                                                                      $4,600
                                                                      1997 SMW Space Saver 2000 Magazine Barfeeder
                                                                      Specifications: Max Bar Length………………………………………………..5’6” Round Bar Diameter………………………..¼” – 3 1/8” (6 - 80mm) Hexagonal Bar Stock A/F………………… 3/8” – 2 ½” (8 – 65mm) Square Bar Stock A/F…………………………3/8” – 2” (8 –
                                                                      • Maximum bar diameter: 3.125"
                                                                      • Maximum bar length: 5.5'
                                                                        2011 MTA International V65L Magazine Bar Feeder
                                                                        $4,500
                                                                        2011 MTA International V65L Magazine Bar Feeder
                                                                        Specifications: Maximum Bar Length .................................................................................... 60” Maximum Bar Diameter ................................................................ 0.25” –
                                                                        • Maximum bar diameter: 2.56"
                                                                        • Maximum bar length: 5'
                                                                          2005 Eisen CT-1118 CNC Tool Room Lathe
                                                                          $6,500
                                                                          2005 Eisen CT-1118 CNC Tool Room Lathe
                                                                          Specifications: Control ..........................................................................................................Fanuc Oi-T Swing .......................................................................
                                                                          Cincinnati MAG FTV 840-3700 CNC Vertical Machining Center
                                                                          $RFQ
                                                                          Cincinnati MAG FTV 840-3700 CNC Vertical Machining Center
                                                                          Reference #30387 Cincinnati FTV 840-3700 CNC Vertical Machining Center Age: 2006 FEATURES: Fanuc 18iMB CNC Control Thru Spindle Coolant Pre-Wired for 4th & 5th Axis Tsudakoma 12" 4th Axis Table CAP
                                                                          • X axis: 145"
                                                                          • Y axis: 32"
                                                                            Used Jet 4' Radial Drill
                                                                            $4,250
                                                                            Used Jet 4' Radial Drill
                                                                            Jet Radial Drill model JRD 939 5.5hp 220v/440v [wired220v] 32-2500 spindle speed. Very good condition
                                                                            • Arm length: 4'
                                                                            • Column diameter: 9"
                                                                              Pratt & Whitney Viking Mills Mitsubishi CNC 96" X table 60" Y
                                                                              $RFQ
                                                                              Pratt & Whitney Viking Mills Mitsubishi CNC 96" X table 60" Y
                                                                              Offer of Pratt & Whitney Viking Horizontal Milling machines with NO tool changer. 5 total machines -2 updated with Mitsubishi CNC controls and 2 complete plus one without spindle - Total 5 machines all 96" X a
                                                                              • Table width: 39"
                                                                              • Table length: 96"
                                                                                Nakamura Tome WT-100 9-Axis CNC Turning Center
                                                                                $RFQ
                                                                                Nakamura Tome WT-100 9-Axis CNC Turning Center
                                                                                Reference #30416 Nakamura-Tome WT-100 9-Axis CNC Turning Center Age: 2016 SPECIFICATIONS: Max. Turning Diameter ................. 7.48" Max. Turning Length ................... 19.80" Max. Bar Size ...
                                                                                Six stand H/V billet mill, 30" & 26" diameter rolls, 1500 hp
                                                                                $RFQ
                                                                                Six stand H/V billet mill, 30" & 26" diameter rolls, 1500 hp
                                                                                Will sell individual stands, roller bearings, spare rolls, chocks and bearings
                                                                                300 Ton straight side, Bliss, 48" x 108" bed, 18 spm, 70" SH
                                                                                $RFQ
                                                                                300 Ton straight side, Bliss, 48" x 108" bed, 18 spm, 70" SH
                                                                                New 1988, still installed, 16" adjustment, Bliss stamping press
                                                                                • Tonnage: 300T
                                                                                • Stroke: 18"
                                                                                  22" x 70" Morgardshammer 3-Hi billet mill with tilt tables, rolle
                                                                                  $RFQ
                                                                                  22" x 70" Morgardshammer 3-Hi billet mill with tilt tables, rolle
                                                                                  Model P-473 with three set up stands, spare rolls, 1000 hp drive motor
                                                                                  45" x 102" 2-Hi Blooming, Hot, Reversing, rolling mill, 2-5000 hp
                                                                                  $RFQ
                                                                                  45" x 102" 2-Hi Blooming, Hot, Reversing, rolling mill, 2-5000 hp
                                                                                  1972, Schloemann, two 5000 hp, 30/75 rpm, Westinghouse drive motors, 40" roll gap, 1100 ton shear, front and back roller tables, front and back slab manipulators
                                                                                  32" x 60" 2-Hi Blaw Knox, hot, reversing Bloom/slab rolling mill
                                                                                  $RFQ
                                                                                  32" x 60" 2-Hi Blaw Knox, hot, reversing Bloom/slab rolling mill
                                                                                  1966 Blaw Knox reversing 2-Hi rolling mill complete with manipulators, front & back roller tables, crop shear, down coiler
                                                                                  HAAS VF-6/50 VERTICAL MACHINING CENTER
                                                                                  $54,900
                                                                                  HAAS VF-6/50 VERTICAL MACHINING CENTER
                                                                                  Make: Haas Model No.: VF-6/50 Serial No.: 31062 Year: 2003 Condition: Very Good All specifications are approximations, and are subject to verification. “Machine has 30 Hp 7500rpm 50 Taper Gear Head Spindle, 30
                                                                                  • X axis: 64"
                                                                                  • Y axis: 32"
                                                                                    HAAS TM-1 TOOL ROOM CNC MILL
                                                                                    $18,000
                                                                                    HAAS TM-1 TOOL ROOM CNC MILL
                                                                                    Make: Haas Model No.: TM-1 Serial No.: 32804 Year: 2003 Condition: Excellent All specifications are approximations, and are subject to verification. “One Owner Machine, All Original Paint on our Floor now, full
                                                                                    • X axis: 30"
                                                                                    • Y axis: 12"
                                                                                      HAAS SUPER MINI MILL 2 VERTICAL MACHINING CENTER
                                                                                      $42,300
                                                                                      HAAS SUPER MINI MILL 2 VERTICAL MACHINING CENTER
                                                                                      Make: Haas Model No.: Super Mini Mill 2 Serial No.: 1108004 Year: 2013/2014 Condition: Almost New Cutting Time: 1088 Hours only All specifications are approximations, and are subject to verification. “One Owne
                                                                                      • X axis: 20"
                                                                                      • Y axis: 16"
                                                                                        2006 CITIZEN MODEL C16 TYPE VII SWISS STYLE CNC LATHE, 16 MM BAR
                                                                                        $RFQ
                                                                                        2006 CITIZEN MODEL C16 TYPE VII SWISS STYLE CNC LATHE, 16 MM BAR
                                                                                        SPECIFICATIONS MAXIMUM MACHINING DIAMETER: 5/8" MAXIMUM MACHINING LENGTH: 7.87" PER CHUCKING MAIN SPINDLE SPEED: 200 - 10,000 RPM BACK SPINDLE SPEED: 200 - 10,000 RPM ROTARY TOOL SPINDLE S
                                                                                        • Spindle hole diameter: 0.62"
                                                                                          1982 TOS SN71B GAP BED ENGINE LATHE WITH INCH/METRIC THREADING, 28” X 80&qu
                                                                                          $12,500
                                                                                          1982 TOS SN71B GAP BED ENGINE LATHE WITH INCH/METRIC THREADING, 28” X 80&qu
                                                                                          CAPACITY SWING OVER BED: 28" SWING OVER CROSS SLIDE: 16.5” SWING OVER GAP: 37.5” DISTANCE BETWEEN CENTERS: 80” BED WIDTH: 18” HEADSTOCK SPINDLE SPEEDS (16): 10 – 1,000 RPM SPINDLE HOLE: 2-13/16” HEADSTO
                                                                                          • Swing: 28"
                                                                                          • Centers: 80"
                                                                                            USED ELUMATEC MODEL MGS 73 SEMI-AUTOMATIC NON FERROUS SAW, STOCK #10652
                                                                                            $RFQ
                                                                                            USED ELUMATEC MODEL MGS 73 SEMI-AUTOMATIC NON FERROUS SAW, STOCK #10652
                                                                                            USED ELUMATEC MODEL MGS 73 SEMI-AUTOMATIC NON FERROUS SAW, STOCK # 10652, YEAR 1999 4.1 H.P., 3,400 RPM, 15" BLADE, MITERS 45 DEGREES L&R, 3 CLAMPS Max Dia. Blade 15 inches CNC Control no Dimensions 32&
                                                                                            • Blade diameter: 15"
                                                                                              TERNSTROM & SWANSON (HARDINGE COPY) HSL-59 SUPER PRECISION SPEED LATHE,
                                                                                              $1,950
                                                                                              TERNSTROM & SWANSON (HARDINGE COPY) HSL-59 SUPER PRECISION SPEED LATHE,
                                                                                              SPECIFICATIONS SWING OVER BED: 9" SPINDLE SPEEDS: 750, 1800, 3000 RPM LENGTH OF BED FROM FACE OF SPINDLE: 10" SPINDLE MOTOR: 0.5 HP SPINDLE CAPACITIES WITH ROUND 5C COLLETS: 1-1/16" WITH HEXAGON
                                                                                              • Swing: 9"
                                                                                                1982 HARDINGE MODEL HSL-59 SUPER PRECISION SPEED LATHE, 1-1/16"
                                                                                                $2,950
                                                                                                1982 HARDINGE MODEL HSL-59 SUPER PRECISION SPEED LATHE, 1-1/16"
                                                                                                SPECIFICATIONS SWING OVER BED: 9" SPINDLE SPEEDS: 750, 1800, 3000 RPM LENGTH OF BED FROM FACE OF SPINDLE: 10" SPINDLE MOTOR: 0.5 HP SPINDLE CAPACITIES WITH ROUND 5C COLLETS: 1-1/16" WITH HEXAGON
                                                                                                • Swing: 9"
                                                                                                  1985 HARDINGE MODEL HSL-59 SUPER PRECISION SPEED LATHE, 1-1/16"
                                                                                                  $3,950
                                                                                                  1985 HARDINGE MODEL HSL-59 SUPER PRECISION SPEED LATHE, 1-1/16"
                                                                                                  SPECIFICATIONS SWING OVER BED: 9" SPINDLE SPEEDS: 750, 1800, 3000 RPM LENGTH OF BED FROM FACE OF SPINDLE: 10" SPINDLE MOTOR: 0.5 HP SPINDLE CAPACITIES WITH ROUND 5C COLLETS: 1-1/16" WITH HEXAGON
                                                                                                  • Swing: 9"
                                                                                                    1985 HARDINGE MODEL HSL-59 SUPER PRECISION SPEED LATHE, 1-1/16"
                                                                                                    $2,950
                                                                                                    1985 HARDINGE MODEL HSL-59 SUPER PRECISION SPEED LATHE, 1-1/16"
                                                                                                    SPECIFICATIONS SWING OVER BED: 9" SPINDLE SPEEDS: 750, 1800, 3000 RPM LENGTH OF BED FROM FACE OF SPINDLE: 10" SPINDLE MOTOR: 0.5 HP SPINDLE CAPACITIES WITH ROUND 5C COLLETS: 1-1/16" WITH HEXAGON
                                                                                                    • Swing: 9"
                                                                                                      1983 HARDINGE MODEL HSL-59 SUPER PRECISION SPEED LATHE, 1-1/16"
                                                                                                      $2,950
                                                                                                      1983 HARDINGE MODEL HSL-59 SUPER PRECISION SPEED LATHE, 1-1/16"
                                                                                                      SPECIFICATIONS SWING OVER BED: 9" SPINDLE SPEEDS: 750, 1800, 3000 RPM LENGTH OF BED FROM FACE OF SPINDLE: 10" SPINDLE MOTOR: 0.5 HP SPINDLE CAPACITIES WITH ROUND 5C COLLETS: 1-1/16" WITH HEXAGON
                                                                                                      • Swing: 9"
                                                                                                        2013 HAAS VF-11/50 VERTICAL MACHINING CENTER, 120" X 40" X 30&quo
                                                                                                        $RFQ
                                                                                                        2013 HAAS VF-11/50 VERTICAL MACHINING CENTER, 120" X 40" X 30&quo
                                                                                                        TRAVELS X-AXIS: 120" Y-AXIS: 40" Z-AXIS: 30" SPINDLE NOSE TO TABLE: 5 – 35" TABLE LENGTH: 120" WIDTH: 28" MAX. WEIGHT ON TABLE: 4,000 LBS
                                                                                                        • X axis: 120"
                                                                                                        • Y axis: 40"
                                                                                                          USED 13" X 18" HYD-MECH MODEL S-20 SERIES III HORIZONTAL MITERING
                                                                                                          $RFQ
                                                                                                          USED 13" X 18" HYD-MECH MODEL S-20 SERIES III HORIZONTAL MITERING
                                                                                                          USED 13" X 18" HYD-MECH MODEL S-20 SERIES III HORIZONTAL MITERING BANDSAW, STOCK# 10653, YEAR 2012 13" X 18", MITERS TO 30 DEGREES, 3 H.P., 45-330 FPM, VFD, 5,000 LB WORK LOAD Rect-Cap (W) 18 in
                                                                                                          • Width capacity: 18"
                                                                                                          • Height capacity: 13"
                                                                                                            2009 Haas Super Mini Mill CNC Vertical Machining Center
                                                                                                            $25,000
                                                                                                            2009 Haas Super Mini Mill CNC Vertical Machining Center
                                                                                                            Specifications: Table Size ................................................................................ 36” x 28” Table Load (Max and Evenly Distributed) .................................... 500 lbs. X-Axis Travel
                                                                                                            • X axis: 16"
                                                                                                            • Y axis: 12.75"
                                                                                                              1982 TOS SN71B GAP BED ENGINE LATHE WITH INCH/METRIC THREADING, 28” X 80&qu
                                                                                                              $RFQ
                                                                                                              1982 TOS SN71B GAP BED ENGINE LATHE WITH INCH/METRIC THREADING, 28” X 80&qu
                                                                                                              CAPACITY SWING OVER BED: 28" SWING OVER CROSS SLIDE: 16.5” SWING OVER GAP: 37.5” DISTANCE BETWEEN CENTERS: 80” BED WIDTH: 18” HEADSTOCK SPINDLE SPEEDS (16): 10 – 1,000 RPM SPINDLE HOLE: 2-13/16” HEADSTO
                                                                                                              • Swing: 28"
                                                                                                              • Centers: 80"
                                                                                                                2000 MITSUBISHI MODEL FX10 WIRE EDM, 14” X 10” X 9”
                                                                                                                $RFQ
                                                                                                                2000 MITSUBISHI MODEL FX10 WIRE EDM, 14” X 10” X 9”
                                                                                                                SPECIFICATIONS TRAVELS: 14” X 10” X 9” U/V TRAVELS: 1.25” X 1.25” INSIDE TANK MEASUREMENT: 31.4” X 31.4” TAPER CUTTING: 15° @ 4” RESOLUTION: .000002” TABLE RAPID FEED: 51.2 IPM WIRE DIAMETER: .008” - .012”
                                                                                                                • X axis travel: 14"
                                                                                                                • Y axis travel: 10"
                                                                                                                  1996 Matsuura MC600VF VMC w/ Pallet Changer
                                                                                                                  $9,500
                                                                                                                  1996 Matsuura MC600VF VMC w/ Pallet Changer
                                                                                                                  Specifications: Table Size ................................................................................... 15.74" x 34.64" Max Table Load ..................................................................
                                                                                                                  • X axis: 23.62"
                                                                                                                  • Y axis: 16.14"
                                                                                                                    1993 Mori Seiki MV40B VMC w/Pallet Changer
                                                                                                                    $8,500
                                                                                                                    1993 Mori Seiki MV40B VMC w/Pallet Changer
                                                                                                                    Specifications: Table Size ....................................................................................... 43.3" x 17.7" Max Table Load ................................................................
                                                                                                                    • X axis: 31.5"
                                                                                                                    • Y axis: 16.1"
                                                                                                                      MATSUURA, MAM 500HG-PC11, 19.69" X, 18.5" Y, 17.7" Z, NEW: 2
                                                                                                                      $RFQ
                                                                                                                      MATSUURA, MAM 500HG-PC11, 19.69" X, 18.5" Y, 17.7" Z, NEW: 2
                                                                                                                      SPECIFICATIONS: TRAVELS: --X: 19.69" --Y: 18.5" --Z: 17.7" PALLET SIZE: (11) 11.81" SQUARE SPINDLE MOTOR: 20 HP (AC DRIVE) SPINDLE TAPER: BT40 SPINDLE SPEED: 15,000 RPM TOOLS: 240 ATC E
                                                                                                                      • X axis: 19.69"
                                                                                                                      • Y axis: 18.5"
                                                                                                                        1998 CLAUSING COLCHESTER 8031 GEARED HEAD, GAP BED ENGINE LATHE, 15" x
                                                                                                                        $RFQ
                                                                                                                        1998 CLAUSING COLCHESTER 8031 GEARED HEAD, GAP BED ENGINE LATHE, 15" x
                                                                                                                        CAPACITIES SWING OVER BED: 15-1/4" SWING OVER SADDLE WAYS: 15-1/4" SWING IN GAP: 23” SWING OVER CROSS SLIDE: 9-1/2" BAR CAPACITY THRU SPINDLE: 2-1/8" DISTANCE BETWEEN CENTERS: 50" HEADST
                                                                                                                        • Swing: 15"
                                                                                                                        • Centers: 50"
                                                                                                                          HAAS, VF-4D, 50" X, 20" Y, 25" Z, CNC VERTICAL MACHINING CEN
                                                                                                                          $RFQ
                                                                                                                          HAAS, VF-4D, 50" X, 20" Y, 25" Z, CNC VERTICAL MACHINING CEN
                                                                                                                          SPECIFICATIONS: TRAVELS: --X: 50" --Y: 20" --Z: 25" TABLE SIZE: 52" x 18" TABLE LOAD (MAX): 3,500 LBS. SPINDLE NOSE TO TABLE TOP: 4" – 29" SPINDLE SPEED: 7,500 RPM SPIN
                                                                                                                          • X axis: 50"
                                                                                                                          • Y axis: 20"
                                                                                                                            2000 HAAS VF-0 VERTICAL MACHINING CENTER WITH HAAS CONTROL, 20” X 16” X 20”
                                                                                                                            $14,500
                                                                                                                            2000 HAAS VF-0 VERTICAL MACHINING CENTER WITH HAAS CONTROL, 20” X 16” X 20”
                                                                                                                            TRAVELS X AXIS: 20” Y AXIS: 16” Z AXIS: 20” SPINDLE NOSE TO TABLE: 4 –24” TABLE LENGTH: 26” WIDTH: 14” MAXIMUM WEIGHT ON TABLE: 3,000 LBS T-SLOTS T-SLOTS WIDTH: .625” CENTER DIS
                                                                                                                            • X axis: 20"
                                                                                                                            • Y axis: 16"
                                                                                                                              HAAS VF-5/50, 50" X, 26" Y, 25" Z, CNC VERTICAL MACHINING CE
                                                                                                                              $RFQ
                                                                                                                              HAAS VF-5/50, 50" X, 26" Y, 25" Z, CNC VERTICAL MACHINING CE
                                                                                                                              SPECIFICATIONS: TRAVELS --X: 50" --Y: 26" --Z: 25" RPM: 10,000 TAPER: CAT 50 ATC: 30 WIRING: 4TH EQUIPPED WITH: HAAS CNC CONTROL 2 SPEED GEARBOX CHIP AUGER THROUGH SPINDLE COOLANT RIG
                                                                                                                              • X axis: 50"
                                                                                                                              • Y axis: 26"
                                                                                                                                HAAS, VF-4, 50" X, 20" Y, 25" Z, CNC VERTICAL MACHINING CENT
                                                                                                                                $RFQ
                                                                                                                                HAAS, VF-4, 50" X, 20" Y, 25" Z, CNC VERTICAL MACHINING CENT
                                                                                                                                SPECIFICATIONS: TRAVELS: --X: 50" --Y: 20" --Z: 25" A1: 105 DEGREES B1: 360 DEGREES MAX FEED: 650 IPM RAPID RATE: 1,000 IPM TABLE SIZE: L: 52" X W: 18" MAX. WORKPIECE WEIGHT: 3,500 L
                                                                                                                                • X axis: 50"
                                                                                                                                • Y axis: 20"
                                                                                                                                  FADAL, VMC-2216HT, 22" X, 16" Y, 20" Z, 88HS CNTRL, NEW: 199
                                                                                                                                  $RFQ
                                                                                                                                  FADAL, VMC-2216HT, 22" X, 16" Y, 20" Z, 88HS CNTRL, NEW: 199
                                                                                                                                  SPECIFICATIONS: TRAVELS: --X: 22" --Y: 16" --Z: 20" TABLE SIZE: 39" X 16" TABLE LOAD (MAX): 750 LBS. SPINDLE SPEED: 10,000 RPM SPINDLE TAPER: CAT 40 SPINDLE MOTOR: 15 H.P. / AC D
                                                                                                                                  • X axis: 22"
                                                                                                                                  • Y axis: 16"
                                                                                                                                    FADAL, VMC-2216HT, 22" X, 16" Y, 20" Z, 88HS CNTRL, NEW: 199
                                                                                                                                    $RFQ
                                                                                                                                    FADAL, VMC-2216HT, 22" X, 16" Y, 20" Z, 88HS CNTRL, NEW: 199
                                                                                                                                    SPECIFICATIONS: TRAVELS: --X: 22" --Y: 16" --Z: 20" TABLE SIZE: 39" X 16" TABLE LOAD (MAX): 750 LBS. SPINDLE SPEED: 10,000 RPM SPINDLE TAPER: CAT 40 SPINDLE MOTOR: 15 H.P. / AC
                                                                                                                                    • X axis: 22"
                                                                                                                                    • Y axis: 16"
                                                                                                                                      DMG MORI SEIKI, CMX 1100V, 43.3" X, 22" Y, 20.1" Z, F0iMF CN
                                                                                                                                      $RFQ
                                                                                                                                      DMG MORI SEIKI, CMX 1100V, 43.3" X, 22" Y, 20.1" Z, F0iMF CN
                                                                                                                                      SPECIFICATIONS: TRAVELS: --X: 43.3" --Y: 22" --Z: 20.1" MAX. TABLE LOAD: 2,205 LBS TABLE LENGTH: 55.1" TABLE WIDTH: 22" IMPROVED C-FRAME DESIGN WITH RIGID Y AXIS DIRECT MEASURING SY
                                                                                                                                      • X axis: 43.3"
                                                                                                                                      • Y axis: 22"
                                                                                                                                        WALTER, HELITRONIC POWER, GE FANUC SERIES 310i MODEL A5 CNTRL, NEW: 2013
                                                                                                                                        $RFQ
                                                                                                                                        WALTER, HELITRONIC POWER, GE FANUC SERIES 310i MODEL A5 CNTRL, NEW: 2013
                                                                                                                                        SPECIFICATIONS: MAXIMUM DIAMETER: 12.6" (320 MM) MAXIMUM GRIND LENGTH FROM THE WORKHEAD ISO 50 TAPER GAGE POINT: 11.8" (300 MM) LINEAR AXES RAPID TRAVERSE RATE: UP TO 600 IPM ROTARY C-AXIS RAPID TRAVER
                                                                                                                                        USED SHELDON MODEL 0 HORIZONTAL MILL
                                                                                                                                        $1,250
                                                                                                                                        USED SHELDON MODEL 0 HORIZONTAL MILL
                                                                                                                                        HOLE THROUGH SPINDLE: 9/16” SIZE OF SPINDLE TAPER: NO 9 B & S SIZE OF TABLE: 5” X 20” NUMBER OF TABLE T-SLOTS: 1 WIDTH OF T-SLOT: 7/16” LONGITUDINAL TRAVEL OF TABLE: 12” CROSS TRAVEL OF TABLE: 5-1/2” VERTICAL
                                                                                                                                        • Table width: 5"
                                                                                                                                        • Table length: 20"
                                                                                                                                          GIDDINGS & LEWIS, MC50, 66" X, 68" Y, 36" Z, NEW: 1994
                                                                                                                                          $RFQ
                                                                                                                                          GIDDINGS & LEWIS, MC50, 66" X, 68" Y, 36" Z, NEW: 1994
                                                                                                                                          SPECIFICATIONS: TRAVELS: --X: 66" --Y: 68" --Z: 36" W: 35" 5 AXIS-CONTINUOUS MACHINING AREA: 72" CYLINDER X 68" HEIGHT 6 PALLET: 36 X 48 120 TOOL CAPACITY 5" SPINDLE
                                                                                                                                          Pietro Carnaghi CNC Travelling Gantry Combination Milling & Turning Cen
                                                                                                                                          $RFQ
                                                                                                                                          Pietro Carnaghi CNC Travelling Gantry Combination Milling & Turning Cen
                                                                                                                                          Reference #30179 Pietro Carnaghi CNC Travelling Gantry Combination Milling & Turning Center FEATURES: Siemens 840D CNC Control (Retrofit 2012) (2) 78.74" Diameter Mill Turn Tables Vertical Milling &
                                                                                                                                          • Distance between houses: 118.11"
                                                                                                                                            Fellows Model 4GS High Speed Gear Shaper
                                                                                                                                            $RFQ
                                                                                                                                            Fellows Model 4GS High Speed Gear Shaper
                                                                                                                                            S/N: 30633 New: 1956 EQUIPPED WITH: For External And Internal Spur And Helical Gears, Splines, Clutches, Cams And Other Non-Involute Shapes. Motor Driven With 3 HP, 3 Phase, 60 Cycle, 220 Volt Main Motor. 
                                                                                                                                            • Maximum gear diameter: 6"
                                                                                                                                              1991 SCOTCHMAN BEWO MODEL CPO-350HT/PK COLD SAW, 14"
                                                                                                                                              $RFQ
                                                                                                                                              1991 SCOTCHMAN BEWO MODEL CPO-350HT/PK COLD SAW, 14"
                                                                                                                                              TUBING, 90 DEGREES ROUND: 4-7/8" SQUARE: 4-3/8" X 4-3/8" RECTANGLE: 5-1/2" X 4" TUBING, 45 DEGREES ROUND: 4-3/8" SQUARE: 4" X 4" RECTANGLE: 4" X 4" SOLID, 90
                                                                                                                                              • Blade diameter: 14"
                                                                                                                                                CLAUSING MODEL 2234-501 FLOOR DRILL WITH AIR HYDRAULIC FEED, 20"
                                                                                                                                                $RFQ
                                                                                                                                                CLAUSING MODEL 2234-501 FLOOR DRILL WITH AIR HYDRAULIC FEED, 20"
                                                                                                                                                SPECIFICATIONS CAPACITY, HAND FEED: 1-1/4” DRILL TO CENTER OF CIRCLE: 20" SPINDLE TAPER: #3 MT SPINDLE TRAVEL: 6-1/2" COLUMN: 4” DIAMETER QUILL: 2-1/2” DIAMETER PRODUCTION TABLE: 45” X 29” NUMBER OF SPE
                                                                                                                                                • Swing: 20"
                                                                                                                                                • Motor: 1HP
                                                                                                                                                  Toyoda FA630 CNC Horizontal Machining Center
                                                                                                                                                  $RFQ
                                                                                                                                                  Toyoda FA630 CNC Horizontal Machining Center
                                                                                                                                                  New: 1998 EQUIPPED WITH: Fanuc 15MB CNC Control. Full 4th Axis. Tsudakoma Model RB-400K 5th Axis. Thru Spindle Coolant. 120-Position Automatic Tool Changer. Barnes Kleenall Chip Filter System. Approximately (60) CAT
                                                                                                                                                  • X axis: 39.37"
                                                                                                                                                  • Y axis: 31.5"
                                                                                                                                                    CLAUSING 2286 2-SPINDLE VARIABLE SPEED DRILL PRESS, 20" THROAT
                                                                                                                                                    $4,950
                                                                                                                                                    CLAUSING 2286 2-SPINDLE VARIABLE SPEED DRILL PRESS, 20" THROAT
                                                                                                                                                    SPECIFICATIONS DRILL TO CENTER OF CIRCLE: 20" DIA CAPACITY (HAND FEED): 1-1/4" DIA SPINDLE NOSE: # 3 MORSE TAPER, 1.74" OD SPINDLE TRAVEL: 6-1/2" COLUMN (GROUND STEEL): 4" DIA
                                                                                                                                                    2012 Cincinnati 6x12 4000 Watt Fiber Laser
                                                                                                                                                    $RFQ
                                                                                                                                                    2012 Cincinnati 6x12 4000 Watt Fiber Laser
                                                                                                                                                    4000 Watt Fiber Laser Source 6x12 Dual Pallet Shuttle Tables 148" X Travel 74" Y Travel Cincinnati Touch Screen Controls, 4000 Watt Fiber Laser Source, 6' x 12' Dual Pallet Shuttle Tables, Capacit
                                                                                                                                                    • Wattage: 4000W
                                                                                                                                                    • X axis travel: 12'
                                                                                                                                                      2014 CHEVALIER FSG-1224ADIII AUTO SURFACE GRINDER WITH PLC, 12" X 24&q
                                                                                                                                                      $RFQ
                                                                                                                                                      2014 CHEVALIER FSG-1224ADIII AUTO SURFACE GRINDER WITH PLC, 12" X 24&q
                                                                                                                                                      SPECIFICATIONS MAXIMUM GRINDING LENGTH: 24" MAXIMUM GRINDING WIDTH: 12" MAXIMUM SPINDLE CENTER TO TABLE SURFACE: 24" STANDARD MAGNETIC CHUCK SIZE: 11-3/4" X 23-5/8" GRINDING WHEEL: 14&quo
                                                                                                                                                      • Table width: 12"
                                                                                                                                                      • Table length: 24"
                                                                                                                                                        1992 CHEVALIER MODEL FSG-1224AD FULLY AUTOMATIC SURFACE GRINDER, 12”X 24”
                                                                                                                                                        $RFQ
                                                                                                                                                        1992 CHEVALIER MODEL FSG-1224AD FULLY AUTOMATIC SURFACE GRINDER, 12”X 24”
                                                                                                                                                        TABLE SIZE: 11-3/4" X 23-5/8" MAX GRINDING LENGTH: 24" MAX GRINDING WIDTH: 12" MAX DISTANCE FROM TABLE SURFACE TO SPINDLE CENTERLINE: 19-3/4” STANDARD MAGNETIC CHUCK SIZE: 11-3/4" X
                                                                                                                                                        • Table width: 12"
                                                                                                                                                        • Table length: 24"
                                                                                                                                                          2000 ALLIANT MODEL 949-3V VARIABLE SPEED VERTICAL MILL, 9" X 49"
                                                                                                                                                          $2,950
                                                                                                                                                          2000 ALLIANT MODEL 949-3V VARIABLE SPEED VERTICAL MILL, 9" X 49"
                                                                                                                                                          TABLE WORKING SURFACE: 9” X 49” LONGITUDINAL TRAVEL: 37” CROSS TRAVEL: 12-3/4" VERTICAL KNEE TRAVEL: 17" T-SLOT SIZE: 5/8” SPINDLE SPEED DRIVE: 70 – 4,200 RPM TAPER: R-8 MOTOR: 3 HP QUILL QUILL
                                                                                                                                                          • Table width: 9"
                                                                                                                                                          • Table length: 49"
                                                                                                                                                            2000 ALLIANT MODEL 949-3V VARIABLE SPEED VERTICAL MILL, 9" X 49"
                                                                                                                                                            $2,950
                                                                                                                                                            2000 ALLIANT MODEL 949-3V VARIABLE SPEED VERTICAL MILL, 9" X 49"
                                                                                                                                                            TABLE WORKING SURFACE: 9” X 49” LONGITUDINAL TRAVEL: 37” CROSS TRAVEL: 12-3/4" VERTICAL KNEE TRAVEL: 17" T-SLOT SIZE: 5/8” SPINDLE SPEED DRIVE: 70 – 4,200 RPM TAPER: R-8 MOTOR: 3 HP QUILL QUILL
                                                                                                                                                            • Table width: 9"
                                                                                                                                                            • Table length: 49"
                                                                                                                                                              2000 HARDINGE MODEL VMC1000II CNC VERTICAL MACHINING CENTER, 40" X 20&
                                                                                                                                                              $RFQ
                                                                                                                                                              2000 HARDINGE MODEL VMC1000II CNC VERTICAL MACHINING CENTER, 40" X 20&
                                                                                                                                                              TRAVELS X-AXIS LONGITUDINAL: 40.16" Y-AXIS CROSS: 20.08" Z-AXIS VERTICAL: 20.08" SPINDLE NOSE TO TABLE SURFACE: 6.1" TO 26.1" TABLE FRONT EDGE TO DOOR: 7.23" SPINDLE CENTER TO COLUMN:
                                                                                                                                                              • X axis: 40"
                                                                                                                                                              • Y axis: 20"
                                                                                                                                                                Hurco-Beyeler 165 Ton x 10' Hydraulic Press Brake
                                                                                                                                                                $RFQ
                                                                                                                                                                Hurco-Beyeler 165 Ton x 10' Hydraulic Press Brake
                                                                                                                                                                Used Hurco-Beyeler 165 Ton x 10' Hydraulic Press Brake S/N: Unk, Mfg: 1999, Stock No: 87310 Model PRDC-150-3100 Capacity: 165 Tons Overall Length Bed & Ram: 122" Distance Between Housings: 108" Th
                                                                                                                                                                • Tonnage: 165T
                                                                                                                                                                  300" OM Single Column, 204" Table, 300" Swing, 130" Und
                                                                                                                                                                  $RFQ
                                                                                                                                                                  300" OM Single Column, 204" Table, 300" Swing, 130" Und
                                                                                                                                                                  300" OM SINGLE COLUMN CNC VERTICAL BORING MILL Model OM1, New 1992, Stock# K15801 EQUIPPED WITH: Fanuc 0T CNC Control, Fanuc Axis Drives and Motors, Retractable Column Des
                                                                                                                                                                  • Swing: 300"
                                                                                                                                                                    6" G&L (2), Model 70-H60-UF, GE CNC Controls, 120" x 480&
                                                                                                                                                                    $RFQ
                                                                                                                                                                    6" G&L (2), Model 70-H60-UF, GE CNC Controls, 120" x 480&
                                                                                                                                                                    (2) 6" GIDDINGS & LEWIS CNC FLOOR TYPE HORIZONTAL BORING MILLS Model 70-H60-UF, New 1974, Stock# K15749 This is (2) Traveling Column CNC Floor Type Boring Mills
                                                                                                                                                                    • Spindle diameter: 6"
                                                                                                                                                                    • X axis travel: 480"
                                                                                                                                                                      2002 Amada FO4020, 6x12, 4000 Watt Laser
                                                                                                                                                                      $RFQ
                                                                                                                                                                      2002 Amada FO4020, 6x12, 4000 Watt Laser
                                                                                                                                                                      4000 Watt Co2 Resonator 6x12 Dual Pallet Tables 160" x 80" Travels Fanuc PC CNC Controls, Fanuc 4000 Watt Resonator, Dual Rack & Pinion Drive, Adaptive Optics, Non-Contact Cutting Head, Chiller Unit, D
                                                                                                                                                                      • Wattage: 4000W
                                                                                                                                                                      • X axis travel: 12'
                                                                                                                                                                        2000 Trumpf L3030, 5x10, New 4000 Watt C02 Resonator
                                                                                                                                                                        $RFQ
                                                                                                                                                                        2000 Trumpf L3030, 5x10, New 4000 Watt C02 Resonator
                                                                                                                                                                        4000 Watt Flying Optic New Resonator 5x10 Pallet Shuttle Tables Siemens CNC Controls, 2010 New Trumpf TLF4000 Watt Resonator, 5' x 10' Dual Pallet Shuttle Tables, 5" and 7.5" Cutting Heads Chiller
                                                                                                                                                                        • Wattage: 4000W
                                                                                                                                                                        • X axis travel: 10'
                                                                                                                                                                          Extrude Hone Profile 100,4"Cyl Dia,350-2000 PSI Media Pressure,OneWay
                                                                                                                                                                          $RFQ
                                                                                                                                                                          Extrude Hone Profile 100,4"Cyl Dia,350-2000 PSI Media Pressure,OneWay
                                                                                                                                                                          Serial No. FOO-1144 New - 2000 SPECIFICATIONS: Media Tube Diameter......................................................4.0" Hydraulic Ram Diameter..................................................3.25"
                                                                                                                                                                          IGM-2M,Okamoto,0.24"-8" ID Cap,24" Sw,20" Long Travel,A
                                                                                                                                                                          $RFQ
                                                                                                                                                                          IGM-2M,Okamoto,0.24"-8" ID Cap,24" Sw,20" Long Travel,A
                                                                                                                                                                          Serial No. 11574 New - 1998 SPECIFICATIONS: Internal Diameter to be Ground.....................................0.24" - 8" Grinding Stroke - Maximum..................................................8"
                                                                                                                                                                          Acer EVS-3VKH E-Mill, Millstar III,50" x 10" Tbl,4,500 RPM,3 HP,3
                                                                                                                                                                          $RFQ
                                                                                                                                                                          Acer EVS-3VKH E-Mill, Millstar III,50" x 10" Tbl,4,500 RPM,3 HP,3
                                                                                                                                                                          Serial No. M0080594 New - 2000 SPECIFICATIONS: Table: - Working Surface.................................................50" x 10" - Longitudinal Travel...............................................32-1/
                                                                                                                                                                          Long Foam Cutting Tools EPS Foam Milling Router Bits Ball noseand Flat End
                                                                                                                                                                          $0
                                                                                                                                                                          Long Foam Cutting Tools EPS Foam Milling Router Bits Ball noseand Flat End
                                                                                                                                                                          Long Foam Cutting Tools EPS Foam Milling Router Bits Ball End and Flat End Model: Ball End and Flat End Long flute foam cutting router bits These long series foam end mill and ball nose router bits are widely used wi
                                                                                                                                                                          Categories:
                                                                                                                                                                          Condition:
                                                                                                                                                                          Manufacturer:
                                                                                                                                                                          Location:
                                                                                                                                                                          Price:
                                                                                                                                                                          •  to 
                                                                                                                                                                          1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>