buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Furnaces & Ovens

Furnaces & Ovens for Sale

204 new & used furnaces & ovens items for sale
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 1 - 20 of 204 matches
Sort by:
Items Per Page:  20  |  50 |  100
Despatch Model PWC-3-10-1E 500° Electric Walk-In Oven
S/N: 168744L New: 2001 EQUIPPED WITH: Horizontal Recirculating Air Flow. Exhaust Fan. 2-Door Walk In with Flush Floor Cart Loading and Unloading Shelves. Despatch 1422 Programmable Cycle Controller. Process Timer
48" Width 72" Height JPW OVEN, 500 Degree, 15 KW,  Horizontal Airflow
  JPW DESIGN & MANUFACTURING ELECTRONIC POWDER COATING OVEN   SPECIFICATIONS: INTERNAL DIMENSIONS ..................... 48"W x 48"D x 72"H EXTERNAL DIMENSIOND: .................... 59&
Gehnrich Industrial Oven
I have 2 Gehnrich Industrial ovens for sale. 1500 MBTU - 45 Amp - 220/1/60 KW - Serial number 10527 - Inside dimensions: 8' deep, 9' wide, 7'5" high. Outside dimensions: 10'9" wide, 9'4"
26" Width 13" Height Grieve NT1000 OVEN, 1000 DEGREE F
GRIEVE NT-1000 INDUSTRIAL OVEN   WORK SPACE DIMENSIONS:26"W x 22"D x 13"H VOLUME: 4.3 Cu.Ft. OUTSIDE DIMENSIONS:41.5"W x 35"D x 31"H MAXIMUM TEMPERATURE: 1000°F INSULATION
Flinn & Dreffein Natural Gas 36' x 15' Single Car Bottom Heat T
(2) 36 ft 8" long x 15 Ft. 4" Wide Flinn & Dreffein Natural Gas Fired Single Car Bottom Heat Treat Furnaces Built 1980's by Flinn & Dreffein Engineering Co., Northbrook, Illinois USA Max operating t
  • Chamber width: 15.4"
  • Chamber length: 34.1"
    Dr. Fritsch DSP 515 FAST/SPS/DHP Field Assisted Direct-Hot Pressing
    This Sintering Furnace uses the following cutting edge technologies: - SPS - Spark Plasma Sintering - FAST - Field Assisted Sintering Technique - DHP - Direct Hot-Presssing New - 2016 Hours - Approximately 100
    SPIRO THERM DUAL UNIT TOOL ROOM FURNACE, TOP OVEN 10KVA, 2300F MAX, 230V
    SPIRO THERM DUAL UNIT TOOL ROOM FURNACE 230V TOP OVEN: 10 KVA - 2300 DEGREES F MAX. BOTTOM OVEN: 14 KW, 1200 DEGREE F MAX.
    Lucifer HDL 7055B OVEN, 2300 Degrees
    GILBERT S. SIMONSKI HEAT TREAT FURNACE MODEL: HDL 7055B   2300 DEGREE MAX. TEMP FOR MORE INFORMATION: Call Mike at 973-497-7540
    42" (1067mm)Dia x 36"(914mm)H., S&M;, PIT BELL TYPE ELECTRIC ANNEALING (13368)
    MACHINE 13368 MANUFACTURER: S&M; ENGINEERING, NORTH ATTLEBORO, MA USA INSIDE MAXIMUM HEIGHT - 36" INSIDE MAXIMUM WIDTH - 42" OD MAXIMUM TEMPERATURE 1800 CONTROL - 120 KW, 144 AMP, 480 VOLT HEATING SOURCE - ELECTRICAL C
    Grieve AA650 OVEN, 650 degrees
    GRIEVE AA650 OVEN FOR MORE INFORMATION: Call Mike at 973-497-7540
    13 1/2" (343mm), THERMAL BASICS ANNEALING FURNACE, STRIP WIDTH 1"- 13-1/4"
    MACHINE 13337 13-1/4" THERMAL BASICS COPPER AND BRASS STRIP ANNEALING LINE MANUFACTURER - THERMAL BASICS STRIP WIDTH - 1" - 13 1/4" COIL WEIGHT - 4,000 LBS. COIL ID/OD - 16/42 STRIP THICKNESS RANGE - .005"-.125" SPEED -
    5" (127mm), C I HAYES, STRIP ANNEALING FURNACE, STRIP WIDTH 1/2"- 5" (12-12
    MACHINE 13335 5" C.I. HAYES COPPER AND BRASS STRIP ANNEALING LINE STRIP WIDTH - 1/2" - 5" COIL WEIGHT - 2,000 LBS. COIL ID/OD - 16/42 STRIP THICKNESS RANGE - .005"-0.062" SPEED - 5' per min NUMBER OF HEAT ZONES - 2 HEATI
    36" (914mm)H x 42" (1066mm)OD S&M; ENGINEERING PIT TYPE BELL ELECTRIC (113623)
    MACHINE 13338 MANUFACTURER: S&M; ENGINEERING, NORTH ATTLEBORO, MA USA TYPE: BELL PIT TYPE ANNEALING FURNACE INSIDE MAXIMUM HEIGHT - 36" INSIDE MAXIMUM WIDTH - 42" OD MAXIMUM TEMPERATURE 1800 CONTROL - 120 KW, 144 AMP, 4
    WSF / American Autoclave, 66” x 234”, 125 PSI
    WSF / American Autoclave Stock #: 20151-IS Serial No.: 10889 Year: 1976 / 2011 Specifications: Working Area: 66” x 234” Maximum Operating Pressure: 125 PSI Maximum Operating Temperature: 400 Deg F Heatin
    NYLE L500 Dehumidification Kiln
    NYLE L500 Dehumidification Kiln. Unit only. No chamber with 5 Reversing Circulation Fans, Heater, Blower, Wet Bulb, Dry Bulb. 230V 3ph 72A Total Optional Transformer available to run at 480V 3ph 5 HP Compressor
    1-1/2" x 6" Etna # 156RA , swager machine, 3/4" solids, #A2026
    Stock # A2026 Manufacturer: ETNA Model: 156RA Capacity: 1-1/2" Serial: 1517 Price: $12,500 Category: Swagers Condition: Used Machinery Full Description Number Of Rolls: 16 Diameter Of Rol
    2" Custom hydraulic swager macihne, #A1885
    Capacity: 2" Stroke On Infeed: 30" Voltage: 220v/440v, 3 Phase Horsepower (Main Motor): 15 Horsepower (Hydraulic Pump): 4 Dimensions (L x D x H): 117" x45" x 70" Weight: 6,000 Lbs. Location: Los Ange
    36" W. x 36" H. x 36" L., GRIEVE IC-1250 INERT ATMOSPHERE OV
    GRIEVE IC-1250 INERT ATMOSPHERE OVEN NEW: 2011 INSTALLED JANUARY 2012 SPECIFICATIONS: WORKSPACE DIMENSIONS................... 36" X 36" X 36" WORKSPACE VOLUME....................... 27 CU FT
    • Chamber width: 36"
    • Chamber length: 36"
      Related Subcategories:
      Condition:
      Price:
      •  to 
      1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>