buy & sell, new & used machinery, machine tools & equipment

Machine Tools > New Hampshire

Machine Tools in New Hampshire For Sale

17 new & used machine tools items for sale in New Hampshire
1
Refine: Viewing 1 - 17 of 17 matches
Sort by:
Items Per Page:  20  |  50 |  100
NIAGRA MODEL 110 - 10 FT BY 14 GAUGE MILD STEEL SHEAR
NIAGRA SHEAR 10FT BY 14 GAUGE RECENTLY REBUILT AND READY TO WORK, EXCELLENT CONDITION FOR IMMEDIATE SHIPMENT. 24" BACK GAUGE, 85 STOKES PER MINUTE, 208/220/440 3 PHASE POWER, 2HP MAIN MOTOR, UNDER POWER IN KINGSTON
  • Maximum thickness: 14Ga
  • Cutting length: 120"
    MARVEL V10A VERTICAL BAND SAW
    MARVEL V10A VERTICAL BAND SAW IN GOOD OPERATING CONDITION. INSPECTION IN UNION MAINE BY APPOINTMENT. SPECIFICATIONS Capacity: 10" x 10" 7" x 10" - Blade @ 45 Degrees (Column Tilts to Right Only)
    • Throat capacity: 10"
    • Height capacity: 10"
      300 TON CINCINATTI MECHANICAL 12 FT BRAKE WITH TOOLING
      300 TON CINCINATTI MECHANICAL PRES BRAKE, 12 FT BED WITH PIT REQUIREMENT, UNDER POWER FOR INSPECTION IN CENTRAL MAINE Good operating condition with pit required 4 WAY 10 FT DIE with 4" large opening down to
      • Tonnage: 300T
        10 ft press brake tooling / 4 way dies to 3" & 4" large openi
        PRESS BRAKE TOOLING 10 FT LENGTH TO INCLUDE 2 4 WAY DIES, ONE DIE HOLDER AND ONE 1/2" RADIUS PUNCH. MEASUREMENTS ARE BEST ESTIMATES ACCURATE TO 1/8" LARGE 4 WAY OPENINGS:1 1/4", 1 1/2", 2 1/2"
        10 FT ROTO-FINISH MULTI-PASS PRODUCTION / 6" TRACK
        10 FOOT DIAMETER ROTO FINISH VIBRATORY FINISHER WITH 6" WIDE TRACK FOR PRODUCTION PROCESSING IN NEAR NEW CONDITION - USED ONLY FOR TESTING THEN MOVED TO STORAGE. INSPECTION AND SHIPPING FROM TILTON, NH
        D & K Chicago 240 Ton Mechanical 12 ft Brake - Model 610D
        Chicago 240 ton mechanical 12 ft brake, capacity 10' by 3/8 mild steel with clutch upgrade and new paint Model 610D serial number P8731 - 30 ft to 12' by 12 ft door at ground level. Inspection by appointment.
        • Tonnage: 240T
          Mori Seiki 40" by 137" NC LATHE - 8" HOLE - MODEL DLL-3500B
          Mori Seiki Flat Bed NC lathe from operating service, est new 1977, Fanuc 2000C control model DLL-3500B SN 62 est 40" Swing by 137" centers with 8" spindle bore, twin 4 position turrets, 4 jaw chuck, Chip C
          • Swing: 40"
          • Centers: 137"
            Webster & Bennett VTL 72" Table, 84" Swing Siemens CNC
            72" 3 axis (rail, ram & Horizontal) CNC Webster & Bennett VTL. 84" Swing, 45" under cross rail, 4 Jaw Manual Chuck with top jaws originally NC Est 70's new, SN 6221-4 currently has CNC Siemens
            • Swing: 84"
              6000MM BOST VTL 60C LIVE SPINDLE VERTICAL LATHE, 2011
              TABLE DIAMETER: 6000 MM SWING: 6000 MM WORK PIECE HEIGHT: 2800 MM POWER: 142 KW RPM: 60 DIMENSIONS: 20,400 X 9,800 (MM) WEIGHT: 185,000 KG 2011 BOST VTL 60C Live Spindle Vertical Lathe. Significant rebuild up
              • Swing: 236.22"
                36" PRODUCTOZ 2 AXIS, ROTARY TILT TABLE, 1995
                1995 PRODUCTO MODEL 3032 36" 2 AXIS ROTARY TILT TABLE AVAILABLE IMMEDIATELY IN CONCORD, NH. EQUIPPED WITH: FULL A & B AXES CNC 360,000 POSITION 90 DEGREE TILT INDUCTOSYN SCALES HYDRAULIC CLAMPING
                • Diameter or width: 36"
                  42" PRODUCTO HORIZONTAL/VERTICAL CNC ROTARY TABLE, 2013
                  Table Diameter: 42" Parallelism (Top to Bottom): .0004" Tabletop Flatness: .0005" Tabletop Axial Run Out: .0004" Angular Resolution: .001Ëลก Guaranteed Accuracy: +4 ARC Seconds Guaranteed Re
                  • Diameter or width: 42"
                  • Length: 49.75"
                    2013 HYUNDAI WIA KBN-135CL HORIZONTAL BORING MILL
                    2013 HYUNDAI-WIA KBN135CL HORIZONTAL BORING MILL TRAVELS: X 157.5", Y 98.4", Z 78.7" 2500 RPM, SPINDLE TRAVEL 27.6, 78.7" X 70.1" TABLE, SCALES (X,Y,Z), 8 TOOL ATC, FANUC 31i-A CNC CONTROL
                    • Spindle diameter: 5.31"
                    • X axis travel: 157.5"
                      2009 DOOSAN DCM 2740W FIVE FACE DOUBLE COLUMN MACHINING CENTER
                      SPINDLE RPM: 0-6000 RAM CROSS SECTION: 14.96" X 14.96" SPINDLE TAPER: BT 50 W-AXIS RAIL TRAVEL: 43.31" X-AXIS LONGITUDINAL TABLE TRAVEL: 167.32" Y-AXIS LONGITUDINAL HEAD TRAVEL: 125.98"
                      HANKOOK VTC-200E CNC VERTICAL LATHE, 79"CHUCK,106"SWING,79"T
                      MAXIMUM WORK PIECE WEIGHT: 26,455 lbs. MAXIMUM SWING: 106.3" MAXIMUM CUTTING HEIGHT: 79" TABLE DIAMETER: 79" VERTICAL TRAVEL OF CROSS-RAIL: 39.4" X-AXIS TRAVEL (SADDLE CROSS): 63"
                      • X axis: 63"
                        CARLTON 6 FT 15" COLUMN RADIAL DRILL / NEW 1972
                        6' X 15" CARLTON RADIAL DRILL Manufacturer: Carlton Model: 3A sn 3-5667 Condition: Used (36) Spindle Speeds: 12 to 1200 RPM Spindle Taper: #5 Morse Spindle Travel: 18" (18) Spindle Feeds
                        • Arm length: 6'
                        • Column diameter: 15"
                          Shin ILL STGB-1000 BTA CNC GUN DRILL 2.63 DIA x 43.3 LGNTH, 98.5" X ,4
                          (1) USED 1998 SHIN ILL STGB-1000 BTA GUN DRILL MACHINE SPECIFICATIONS: BTA HOLE DIAMETER .63 - 2.63 MAX DRILL DEPTH 43.3 GUN DRILL HOLE DIAMETER .27 - .945
                          • # Spindles: #1
                          • Maximum hole diameter: 2.63"
                            OM TMS2 30/40 CNC Vertical Boring Mill
                            (1) Used OM-TMS2 30-40 VERTICAL BORING MILL MFG. 1989 CUTTING CAPACITY: TABLE DIAMETER 118.13โ€ MAX. SWING 157.50โ€ MAX. TURNING DIAMETER TO CENTER 118.00โ€ MAX. TURNING HEIGHT ABOV
                            • Swing: 158"
                              Location:
                              • X New Hampshire (17)
                              Price:
                              •  to 
                              1