buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Work Holding

Work Holding Equipment for Sale

170 new & used work holding equipment items for sale
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9
Refine: Viewing 1 - 20 of 170 matches
Sort by:
Items Per Page:  20  |  50 |  100
32" 3-JAW NOBLE FORGED STEEL BODY CHUCK WITH REV TOP JAWS
ONE (1) USED 32" 3-JAW NOBLE FORGED STEEL BODY CHUCK WITH REV TOP JAWS DIAMETER OF CHUCK......................32&
  • Diameter: 32"
  • # Jaws: #3
    30" HORTON 3-JAW STEEL BODY CHUCK WITH REVERSIBLE TOP JAWS
    ONE (1) USED 30" HORTON 3-JAW STEEL BODY CHUCK WITH REVERSIBLE TOP JAWS MODEL..................................S
    • Diameter: 30"
    • # Jaws: #3
      31" ROTOMORS 4-JAW Self Centering Hydraulic Chuck with 15" Bore,
      31"CHUCK 15"BORE ROTOMORS CHUCK PACKAGE WITH 3-JAW FRONT AND 4-JAW REAR Automatic Self-Centering Chucks with Big Thru Bore and Built-in Hydraulic Cylinder Model MC-ID, Stock# K15853,
      31" ROTOMORS 3-JAW Hydraulic Chuck with 15" Bore, Model MC-ID, 15
      ROTOMORS 31" 3-JAW BIG BORE CHUCK Automatic Self-Centering Chuck with Big Thru Bore and Built-in Hydraulic Cylinder Model MC-ID, Stock# K15852 DESCRIPTION: This type of self-centering
      19" ATS SYSTEMS BT SERIES EXTENDED STROKE FRONT ACTUATED AIR CHUCK w/7
      19" ATS SYSTEMS BT SERIES EXTENDED STROKE FRONT ACTUATED AIR CHUCK Model BP-480-185 BT 7.3 ES, Stock # K15600 EQUIPPED WITH: BT Series Chucks are Extended Jaw Stroke Models for Tubular Applicati
      31" X Axis 20" Y Axis Mori Seiki NV5000 1A/40 VERTICAL MACHINING CENTER, MSX-501
      MORI-SEIKI 4-AXIS VERTICAL MACHINING CENTER MODEL: NV5000 1A/40, S/N: NV501HK5945, MFG: 2009   SPECFICATIONS: TRAVELS:   X AXIS TRAVEL .................... 31.5"  800mm   Y AXIS T
      41" X Axis 20" Y Axis Mori Seiki DuraVertical 5100 VERTICAL MACHINING CENTER, Fa
      MORI-SEIKI VERTICAL MACHINING CENTER MODEL: DURA VERTICAL 5100, S/N:  DV005HB1327 MFG:  1/2008   SPECIFICATIONS: TABLE SIZE ................................. 53.1" x 23.6" X-AXIS TRAVEL ..
      11" X Axis 11" Y Axis Fanuc Robodrill T21iFsa, New 2012, 10k Spindle, HPCTS VERT
      FANUC ROBODRILL VERTICAL MACHINING CENTER MODEL: T21I FSA, S/N: P126XJ267, NEW: 2012   SPECIFICATIONS: TABLE WORKING SURFACE: ........ 24.8" X 12.99" TABLE LOAD CAPACITY: .......... 660 LBS TRAVEL
      22" X Axis 22" Y Axis Mori Seiki NH-4000 DCG HORZ MACHINING CENTER, MSX 501 III
      MORI SEIKI HORIZONTAL MACHINING CENTER MODEL: NH 4000 DCG, NEW: 12/2006   SPECIFICATIONS: PALLET SIZE .......................... 15.7" X 15.7" (400MM) MACHINE TRAVELS: -X-AXIS TRAVEL ................
      Southwest Ind. LPM VERTICAL MACHINING CENTER
        TRAK VERTICAL MACHINING CENTER MODEL: LPM, NEW: 2013 WITH THE LATEST SOFTWARE   SPECIFICATIONS: X-AXIS TRAVEL........................... 31" Y-AXIS TRAVEL........................... 18.5" Z
      27" X Axis 14" Y Axis Fanuc ROBODRILL T14iAL,Mfg:2000 VERTICAL MACHINING CENTER,
      FANUC ROBODRILL MACHINING CENTER w/ AUTOMATIC PALLET CHANGER MODEL: a-T14iAL, S/N: P006TJ517,  MFG: 2000   SPECIFICATIONS: PALLET DIMENSIONS ........................ 33.5" x 15.4" (2) X - AXIS T
      80" X Axis 30" Y Axis Fadal 8030 VERTICAL MACHINING CENTER, Fadal Cntrl, Box Way
      FADAL VERTICAL MACHINING CENTER MODEL: 8030 HT,   MFG: 2004   SPECIFICATIONS: TABLE SIZE .................................... 82.5" x 30" MACHINE TRAVELS:     X - AXIS .
      ATS A2-8 5C Collet Chuck COLLETS, 5C
      ATS 5C COLLET CHUCK FOR A2-8 SPINDLE FOR MORE INFORMATION: Call Mike at 973-497-7540
      500 Jacobs Rubberflex For D1-3 Spindle COLLETS, Uses 500 Series Collets
      JACOBS RUBBERFLEX Collet Chuck for D1-3 Spindle Nose Takes up to an 1.06" Cap. Collet - the 501 thru 510 series collets Very Good condition in all respects Complete with collet shown in photos Missing the pins, b
      500 Jacobs Rubberflex For L-0 Spindle COLLETS, 501 - 510 Collets
      JACOBS RUBBERFLEX Collet Chuck for L-0 Threaded Spindle Nose an L-O spindle nose is just under 4-1/2" Dia Threads & 6 TPI L0 is a very common size for LeBlond Regal lathes Takes from .100 to 1.06" Cap. Collet - or
      500 Jacobs Rubberflex For D1-6 Spindle COLLETS, Uses 500 Series Collets
      JACOBS RUBBERFLEX Collet Chuck for D1-6 Spindle Nose Takes up to an 1.06" Cap. Collet Series 500 collets Very Good condition in all respects FOR MORE INFORMATION: Call David at 973-497-7570
      500 Jacobs Rubberflex For D1-3 Spindle COLLETS, Uses 500 Series Collets
      JACOBS RUBBERFLEX Collet Chuck for D1-3 Spindle Nose Takes up to an 1.06" Cap. Collet - the 501 thru 510 series collets Very Good condition in all respects Complete with collet shown in photos FOR MORE IN
      METRIC AND IMPERIAL COLLET EXTENSIONS
      We sell a wide variety of collet extensions priced at $25. All our products are in stock and available for immediate pickup or shipping to your location countrywide. Feel free to contact us for all your tooling needs or
      PRECISION VISES
      We sell a wide variety of vices ranging from $50 to $1500. All our products are in stock and available for immediate pickup or shipping to your location countrywide. Feel free to contact us for all your tooling needs or
      30" X Axis 16" Y Axis Fadal VMC-3016FXMP-HT VERTICAL MACHINING CENTER, Fadal MP
      FADAL VERTICAL MACHINING CENTER MODEL: VMC-3016FXMP HT, NEW: 2008   SPECIFICATIONS: X-AXIS TRAVEL.......................... 30" Y-AXIS TRAVEL.......................... 16" Z-AXIS TRAVEL.............
      Related Subcategories:
      Condition:
      Price:
      •  to 
      1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9