buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Illinois

Machine Tools in Illinois For Sale

2265 new & used machine tools items for sale in Illinois
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 1 - 20 of 2265 matches
Sort by:
Items Per Page:  20  |  50 |  100
MAG Fadal VMC-6030HT, 62.5" x 30" Tbl, 60"X, 30"Y, 30&q
Year Built - 2008 SPECIFICATIONS: Table: - Size............62.5" x 30" - Capacity............4,120 Lbs. - T-Slots............5 x 0.709" x 3.75" Floor to Table Surface............36" Spin
Fadal VMC-4020HT, 48" x 20" Tbl, 40"X, 20"Y, 20"Z,
Year Built - 2004 SPECIFICATIONS: Table: - Size............48" x 20" - Load Capacity - Maximum............3,966 Lbs. - T-Slots............5 x 0.70" x 3.75" - Floor to Table Surface............
Doosan Puma 240MS, 21.7" Sw, 8"X, 22.8"Z, 22.8"B, Sub S
Year Built - 2009 SPECIFICATIONS: Turning Diameter - Maximum............11.4" Machining Length - Maximum............19.7" Swing Over Bed - Maximum............21.7" Distance Between Spindles.........
EWS 40.65321809DW02, ER32, BMT65, Axial Driven, 5000 RPM, 50Nm, 1:1
Serial No. K10030112 SPECIFICATIONS: Clamping Range............Ø0.118" - 0.787" (3-20mm) Spindle Collet Type............ER32 Torque - Maximum............36.88 ft-lbs. (50 Nm) Speed - Maximum........
Hammond UBG-8-8, 8"Ø x 2.5"W Wheels, 2 HP, 5500 RPM, Dry Ope
Serial No. 01457 SPECIFICATIONS: Wheel Diameter............8" Wheel Width............2" Wheel Speed............5500 RPM Motor Horsepower............2 HP Operation Type............Dry Electrics.........
Hammond UBG-8-8, 8"Ø x 2.5"W Wheels, 2 HP, 5500 RPM, Dry Ope
Serial No. 01457 SPECIFICATIONS: Wheel Diameter............8" Wheel Width............2" Wheel Speed............5500 RPM Motor Horsepower............2 HP Operation Type............Dry Electrics.........
Ramco MK36ESS, 21"L x 36"W x 18"H, 150 Lbs. Part Cap., Agita
The Ramco Migi-Kleen is an immersion parts washer designed for the removal of oils, chips and dirt from a wide range of components. It accomplishes this using a simple and rugged pneumatically powered reciprocating platf
Ramco MK36ESS, 21"L x 36"W x 18"H, 150 Lbs. Part Cap., Agita
The Ramco Migi-Kleen is an immersion parts washer designed for the removal of oils, chips and dirt from a wide range of components. It accomplishes this using a simple and rugged pneumatically powered reciprocating platf
7" x 12" MSC 09518879, 7" Round Cap, 3/4" Blade, 85/130
Year Built - 2005 Serial No. 570818 SPECIFICATIONS: Cutting Capacity - Maximum: - Rectangular @ 90°............7" x 12" - Rectangular @ 45°............4-3/4" - 4-7/8" - Rounds @ 90&#
500T Beckwood Triform 16-5BD, 16"Ø Blank, 5" Tool Clearance,
New - 2011 SPECIFICATIONS: Tonnage............500 Chamber pressure - maximum............5,000 PSI Blank diameter - maximum............16" Form tool clearance............5" Daylight............6" C
11" x 18" Hardinge HLV-H, Inch Threading, 5C Collet, 2-Axis DRO,
Year Built - 1971 Rebuilt by Iverson - 2022* Serial No. HLV-H-4842 Motor driven with 2-Speed, 3Ph/60Hz/460 volt variable speed drive unit with direct reading spindle speed indicator and controls. Hardinge Super-Prec
1-1/8" Burr Oak STCOS M5, R. Hand, 36" Hitch Feed, Cut-off, Pull-
New - 1993 Serial No. STTPS-M5-486 CATALOG SPECIFICATIONS: Tube Capacity............3/16" - 1-1/8" Cut Length: - Standard - Minimum............3/4" - Using Pull A-part - Minimum............4-1/2&qu
MT Marchetti DWO1540132, BMT65, ER32, 6000 RPM, 1:1, 100 Nm, 2023
Year Built - 2023 New - Never Used SPECIFICATIONS: Spindle Collet Type............ER32 Speed - Maximum............600 RPM Ratio............1:1 Torque - Maximum............73.7 ft-lbs (100 Nm) External Cooling...
22” x 30” Cosen NC Twin Post Fully Automatic Model C-7656NC Horizontal Band
22” x 30” Cosen NC Twin Post Fully Automatic Model C-7656NC Horizontal Band Saw SPECIFICATIONS: Capacity (Round) 22” Capacity (Square) 22” Capacity (Rectangular) 22” x 30” Blade Size 2.1” x 262” x 0.06” Minimum C
60 Ton L&J Obi Press Model W-60
SPECIFICATIONS: Tonnage 60 Ton Stroke 4” Shut Height 14” Adjustment 3” Bed Size 36” x 24” EQUIPPED WITH: Dual Palm Button Controls. AC/AB. Back Geared. Screw for Incline. Updated Controls with Monitoring. Drilled
  • Tonnage: 60T
  • Stroke: 4"
    60 Ton X 6’ Accurpress Model 7606 CNC Hydraulic Press Brake
    SPECIFICATIONS: Bending Capacity 6’ x 10 Gauge Tonnage 60 US Tons Length of Bed 72” Distance Between Housings 52” Bed Height 34” Length of Ram Stroke 8” Open Height 14” Closed Height 6” Throat Depth 8” Speeds
    Rofin Easy Jewel, Vanadate, 1064 nm, 20 W, IP 22, 2007
    Equipment No. 50011685 Year Built - 2007 SPECIFICATIONS: Medium............Vanadate Wavelength............1064 nm Laser Power............20 W Working Chamber: - Marking Area - Maximum (160 mm Objective)........
    59"W x 47"H x 43"D, Nabertherm N2000/60HA DB200-4, 1112F, El
    New Never Commissioned - 2018 Serial No. - 345806 SPECIFICATIONS: Oven Chamber............59"W x 43.3"D x 47.2"H Work Space............51.2"W x 35.4"D x 39.4"H Oven Chamber Volume....
    Series I, Bridgeport, 9"x48" Tbl, 30"X, 12"Y, 16"Z
    Serial No. 12BR118044 New - 1984 SPECIFICATIONS: Table Size............9" x 42" Table Travel - Longitudinal............30" Table Travel - Cross............12" Vertical Travel of Knee........
    13" x 24" Kellenberger 600U, 3-Wheel Design, ID Spindle, Coolant
    New - 1986 Serial No. 32460-2211 SPECIFICATIONS: Height of Centers, as Presently Configured............9.84" (250 mm) Nominal Swing without Riser Blocks............13" Riser Block Height............2.95&
    Location:
    • X Illinois (2265)
    Price:
    •  to 
    1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>