buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Wire Machinery

Wire Machinery for Sale

639 new & used wire machinery items for sale
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 1 - 20 of 639 matches
Sort by:
Items Per Page:  20  |  50 |  100
5/16" SHUSTER MODEL 2A4V WIRE STRAIGHTEN & CUT MACHINE
5/16" SHUSTER MODEL 2A4V WIRE STRAIGHTEN & CUT MACHINE CAPACITY: .125" - .312" FEED SPEEDS (FPM): 28 TO 300 MOTOR HP: 15 SHORTEST CUT: 2.1" LONGEST CUT: 10'4" APPROXIMATE WEIGH
1/2" RMG 78-1556-20 WIRE DRAWER, 28" CAPSTAN
1/2" RMG 78-1556-20 WIRE DRAWER CAPSTAN DIAMETER: 28" MAXIMUM SPEED: 78 FPM MAXIMUM WIRE DIAMETER (ALLOY): .437" (11mm) MAXIMUM WIRE DIAMETER (MILD STEEL): .500" (12.7mm) HORSE POWER: 10 HP
1" RMG MODEL 1416 WIRE DRAWER, POWER FEED HEAD, PENDANT CONTROL
1" RMG MODEL 1416 WIRE DRAWER W/POWER FEED HEAD PENDANT CONTROL MAX. WIRE DIAMETER MILD STEEL: 1" MAXIMUM WIRE DIAMETER ALLOY: .875" MAXIMUM SPEED: 64RPN CAPSTAN DIAMETER: 52" MOTOR: 30 HP
PENN 1CS WIRE BENDER .250" - .625", 6 POSITION MANUAL TURRET, FOO
PENN 1CS WIRE BENDER .250" - .625" 6 POSITION MANUAL TURRET FOOT PEDAL CONTROL WIRE CAPACITIY: 5 PIECES @ 1/4" 2 PIECES @ 3/8" 1 PIECE @ 5/8" BENDING DEGREE CAPABILITY: 420 DEGREES APPRO
LUBOW WBR-1 WIRE BENDER, 2 STOP
LUBOW WBR-1 WIRE BENDER 2 STOP CAPACITY: 1/4" 8 PIECES 3/8" 5 PIECES 1/2" 1 PIECE TABLE SIZE: 24" X 72" ADJUSTABLE BEND ANGLE::0 - 135 DEGREES
CAR-ANTH PNEUMATIC POWER FORMER, W/FOOT PEDAL
CAR-ANTH PNEUMATIC POWER FORMER W/FOOT PEDAL TABLE SIZE: 8" X 31" CENTER DISC: 6" CENTER PIN: 1/2"
OMCG 1200 WIRE FORMER - TOOLED FOR PEG BOARD HOOKS, REAR FEED
OMCG 1200 WIRE FORMER TOOLED FOR PEG BOARD HOOKS REAR FEED MAXIMUM WIRE DIAMETER: 8 mm MAXIMUM FEED LENGTH: 1200 mm MAXIMUM STRIP WIDTH: 25mm MAXIMUM STRIP THICKNESS: 3mm SPEED RANGE: 21-105 STROKES PER MINUT
  • Wire diameter: 0.312"
    1/4" FASTENER ENGINEERS DTVA-0250-20 WIRE DRAWER
    1/4" FASTENER ENGINEERS DTVA-0250-20 WIRE DRAWER PRODUCTION: 8 - 50 PPM MAXIMUM DIAMETER: 1/4" HP: 2 CAPSTAN: 20"
    LUBOW ML 10T TABLE BENDER, W/TURRET, 8 PRE-SELECTABLE ANGLES
    LUBOW ML10T TABLE BENDER W/TURRET, 8 PRE-SELECTABLE ANGLES WITH AUTOMATIC ANGLE CHANGE WIRE CAPACITY: 8 PIECES 1/4" WIRE 5 PIECES: 3/8" WIRE TABLE SIZE: 24" X 60" CENTER ROTATING DISC: 10&qu
    NIKO PNEUMATIC WIRE BENDER MODEL 417 2 STOP
    NIKO PNEUMATIC MODEL 417 2 STOP WIRE BENDER TABLE SIZE: 20" X 60" CENTER DISC: 6"
    WAFIOS FTU 5.3-98 WIRE FORMER
    WAFIOS FTU 5.3-98 WIRE FORMER WIRE DIAMETER RANGE: 6mm - 12mm MAX. FEED LENGTH: UNLIMITED
    MACBEE 4 BLOCK WIRE DRAWING MACHINE 4HFME
    MACBEE 4 BLOCK MODEL 4HFME WIRE DRAWING MACHINE W/SIEMENS SIMOREG DC DRIVES OIL COOLED DIE BOXES SPOOLER INCLUDES 4 INTEGRATED TORRINGTON 100 SWAGERS NUMBER OF BLOCKS: 4 DIAMETER OF BLOCKS: 13" SPEED: 0 -
    • Block diameter: 13"
      MACBEE 6 BLOCK WIRE DRAWING MACHINE, MODEL 6HFME
      MACBEE 6 BLOCK WIRE DRAWING MACHINE MODEL 6HFME W/SIEMENS SIMOREG DC DRIVES BLOCKS 1-5 GEARED FOR 24% REDUCTION BLOCK 6 GEARED FOR 12% REDUCTION OIL COOLED DIE BOXES SPOOLER INCLUDES 4 INTEGRATED TORRINTON 100 SWAG
      • Block diameter: 13"
        No. X-6 Pullmax , beveling machine, 2-1/2" thickness, 25-55┬░bevel angle, 12 FPM, #499
        Basic Information Model: X- 6 Manufacturer: Pullmax Serial #: 59883 Location: Huntington Park, CA Year Built: - Specifications Max. Thickness: 2 1/2" Angle Of Bevel: 25- 55 Degrees Diameter
        66,000 Lb. (30 M/TON), BULTMANN, 1990/2010, DRAW LENGTH 45' STEEL TUBE (13507)
        MACHINE 13507 TUBE DRAW BENCH Manufacturer: BULTMANN (Germany) Type: 30, double pull Year: 1990/2010 Pulling force: 30 ton Working range:
        1/4" FASTENER ENGINEERS DTVA-0250-20 WIRE DRAWER
        1/4" FASTENER ENGINEERS MODEL DTVA-0250-20 WIRE DRAWER PRODUCTION: 8 - 50 FPM MAXIMUM DIAMETER: 1/4" 2 HP 20" CAPSTAN
        5/8" STRAUS ARTYS STRAIGHTENER
        5/8" STRAUS ARTYS STRAIGHTENER CAPACITY: 5/8" LINE HEIGHT: 40"
        FENN No. 2U UNIVERSAL TYPE TURKSHEAD (13495)
        MACHINE #13495 SPECIFICATIONS MANUFACTURER: FENN MANUFACTURING CO MODEL: 2U TYPE: STANDARD SPEED TURKSHEAD CAPACITY -MAX SQUARE: .078" (2.0mm
        No. DTVA-0715-36 FASTENER ENGINEERING, 5/8" (15.9mm), JUST RECONDITIONED (13500)
        MACHINE# 13500 SPECIFICATIONS: Manufacturer: Fastener Engineering (U.S.A.) Model: DTVA-0715-36 Block Diameter: 36" (915mm) Type of Block: Horizontal Speed: 10-130 FPM (3-40m/min.)
        Related Subcategories:
        Price:
        •  to 
        1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>