buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Ohio

Machine Tools in Ohio For Sale

1476 new & used machine tools items for sale in Ohio
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 1 - 20 of 1476 matches
Sort by:
Items Per Page:  20  |  50 |  100
Cincinnati Monoset MT 2 Tool & Cutter Grinder
Cincinnati Monoset MT2 Tool & Cutter with Tooling ****Excellent Condition**** .002 Backlash Very Tight Machine Cincinnati Milacron Monoset MT2 Tool & Cutter Grinder with Tooling. Comes equipped with DC Sp
Makino C-40 Tool & Cutter Grinder
****Excellent Condition**** Makino C-40 Tool & Cutter Grinder Includes Workhead, Centers, Guards & Wheel Hubs
YODER Step Beam Tube Mill Line
Wall Thickness: .059" - .104" (1.49 - 2.64 mm) Equipped With: • 15,000 Lb. Single Uncoiler w/Coil Car (Hydraulic) • GUILD Shear & End Welder • 4 Stand Breakdown with 26” rollspace • 2 Stand Sizing S
  • Maximum thickness: 0.104"
    27 Stand x 2" x 24" MAX ROLL Rollformer
    Number of Passes: 27 Spindle Diameter: 2" Roll Space: 24" Horizontal Centers: 15" Vertical Adjustment: 4-1/2" - 9-1/2" Equipped With: • Drive System • Push Button Console • 10,000 Lb. NOR
    • # Stands: #27
    • Roll diameter: 2"
      Cincinnati Monoset MT 2 Tool & Cutter Grinder
      Cincinnati Milacron Monoset MT2 Tool & Cutter Grinder with Tooling. Comes equipped with DC Spinning Motor with RPM Control, New Spindle Bearings, Digital Readout, New Nut, Standard Tooling, Wheels and Hubs. Excelle
      Electromagnetic Standard Pole Chuck with Cutler Hammer Controller
      Electromagnetic Standard Pole Chuck with Cutler Hammer Controller (release/hold/off).
      36" DOALL 3613-20, 36" Throat, 30"x30" Table, 13"
      EQUIPPED WITH: 30" x 30" 2-Way Tilting Table, DoAll DBW-15 Blade Welder & Shear, Cast Iron Blade Wheels, Infinitely Variable Speed Control, Work Light. SPECIFICATIONS: Throat Depth 35-1/2" Max
      • Throat capacity: 35.5"
      • Height capacity: 13"
        ARMSTRONG-BLUM MARVEL SERIES 8,18" Throat,33"x26" Tbl, 34.5&
        EQUIPPED WITH: 33" x 26" Worktable, Manual Saw Head Inclination to 45° Left or Right, Manual Vise Clamping, Automatic Saw Head Infeed, 1/2 HP Coolant Pump and Reservoir, T-Slotted Worktable, A.C. Control
        • Throat capacity: 18"
        • Height capacity: 34.5"
          75 TON BLISS C-75, Palm Buttons, 36"x24" Bolster,4" Stroke,3
          EQUIPPED WITH: Air Clutch and Brake, Air Counter Balance Cylinders, Lube System, Palm Buttons. SPECIFICATIONS: Tonnage Capacity 75 Tons Stroke Length 4" Shut Height to Bed, SDAU 17" Ram Adjustment 3.
          • Tonnage: 75T
          • Stroke: 4"
            BRIDGEPORT SERIES 1,2-Axis AcuRite II DRO,9"x42" Tbl,2 HP,700-420
            EQUIPPED WITH: Bridgeport 'Swivel Type' 'J' Style Head, Acu-Rite II DRO, Knee Lock, Power Table Feed, Swivel Type Dovetail Overarm, Tooling. SPECIFICATIONS: Table Size 9" x 42" Table Wor
            • Table width: 9"
            • Table length: 42"
              HARDINGE HLV, 5C Collet Chuck, 11" Swing, 18" Centers, 3000 RPM S
              EQUIPPED WITH: Threading Attachment, 5C Collet Chuck w/ Miscellaneous Collets Included, Chip/Splash Guard, Work Light. Max Swing Over Bed 11" Max Swing Over Carriage 9" Max Swing Over Cross Slide 6"
              • Swing: 11"
              • Centers: 18"
                FOBA GP9000, PC-Based CNC,X=19.69",Y=19.69",Z= 19.69",100W Y
                EQUIPPED WITH: Engraving 2D/3D Structures Contours & Surfaces, Spot Size 0.015-0.1mm, Surface Roughness of Ra=0.5μm, PC Based CNC Control, MS Windows 2000/ XP Operating System, FOBAGRAF Laser Control, FOBAEMC Machin
                CHMER CM323Z,Chmer 75EZ Pwr Supp.,19.7"x 13.8"Tbl, X=11.8",
                EQUIPPED WITH: Programmable CNC Control, On Board Programming, 1000 built in Machining Parameter that can be edited manually, Inch/Metric Unit Switchable, U & V Axis for Taper, Built in Anti-Arc Protection, 75 Amp
                • Power: 75A
                • Table width: 19.7"
                  DOOSAN DHC-400, Fanuc 21i, 15.7"x15.7" Tbl, X=23.6", Y=22&qu
                  EQUIPPED WITH: Fanuc 21i CNC Control, (2) 15.75" Square Pallets with 1° Indexing, 40 Station Automatic Tool Changer, High Pressure Thru the Spindle Coolant, Full Coolant Enclosure, Chip Conveyor, Coolant Syste
                  • X axis: 23.6"
                  • Y axis: 22"
                    OKUMA MULTUS B750Wx3000 9-AXIS, Okuma OSP-300, 41"Swng, 131" Betw
                    EQUIPPED WITH: OSP-P300S-H CNC Control, 41" Max Swing, 131" Between Centers, 24" 2-Jaw Chuck Main Spindle, 20" 3-Jaw Chuck Sub Spindle, 2000 Max RPM Main & Sub-Spindle, 10,000 RPM Milling Spindl
                    • Swing: 41.34"
                    • Centers: 131.81"
                      OKUMA MULTUS B300W MULTI-AXIS, OSP P-200L, Univ.Head, Live Tooling
                      EQUIPPED WITH: Okuma OSP P200L CNC Control, Big Bore Option A2-8 nose (38-3800 RPM, 30/20HP), 10" 3-Jaw Chuck on Main, 8" Chuck on Sub Spindle, 40 Station Automatic Tool Changer, CAPTO C6 Spindle Taper, Tool P
                      OKUMA CROWN L1060, Okuma OSP-U10L, 21.62"Swg, 10" 3Jaw Chk, 20.47
                      EQUIPPED WITH: Okuma OSP-U10L CNC Control, Mac Man, Inch/Metric Switchable, 10" Shunk 3-Jaw Hydraulic Chuck, 3" Bar Capacity, 12 Position ID/OD Tool Turret, Bed Mounted Tailstock, Heavy Duty Slant Bed Constru
                      • Swing: 21.65"
                      • Centers: 20"
                        JOHNFORD HT-40A-2D 4-AXIS, Fanuc 18T CNC Ctrl, 29.5" Swng, 12" 3-
                        EQUIPPED WITH: Fanuc 18T CNC Control, 12" 3-Jaw Chuck, (2) 12-Position Turrets, Programmable Tailstock, Chip Conveyor & Coolant System. Max Swing Over Bed 29.5" Main Spindle Chuck Size 12" Max
                        • Swing: 29.5"
                        • Centers: 40"
                          HAAS SL-40T, Haas CNC Control, 40" Swng, 15" 3-Jaw Chk, 51"
                          EQUIPPED WITH: Haas CNC Control, 15" 3-Jaw Chuck, 10 Position Turret, 40" Max Swing, 51" Between Centers with Programmable Tailstock, Chip Auger & Coolant System. Max Swing Over Bed 40" Max
                          • Swing: 40"
                          • Centers: 51"
                            DOOSAN PUMA 480L, Fanuc 32i CNC Ctrl, 24'' 3-Jaw Chck, 36''
                            EQUIPPED WITH: Fanuc 32i CNC Control, 10.4" Color LCD, 24" Samchully 3-Jaw Hydraulic Chuck, 35" Max Swing, 84" Between Centers, 6.5" Bar Capacity, 12 Position Turret, 2-Speed Gear Box - 1,500 Ma
                            • Swing: 35.4"
                            • Centers: 84"
                              Location:
                              • X Ohio (1476)
                              Price:
                              •  to 
                              1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>