buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Connecticut

Machine Tools in Connecticut For Sale

702 new & used machine tools items for sale in Connecticut
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 1 - 20 of 702 matches
Sort by:
Items Per Page:  20  |  50 |  100
9 STAND I2S WIRE SHAPING TANDEM ROLLING MILL (13802)
$RFQ
9 STAND I2S WIRE SHAPING TANDEM ROLLING MILL (13802)
MACHINE 13802 9 STAND I2S WIRE SHAPING TANDEM ROLLING MILL GENERAL LINE SPECIFICATIONS: MANUFACTURER - I2S (USA) YEAR - 1995, UPGRADED & NEW ELECTRICS 2018 TYPE - COIL TO COIL OR COIL TO BAR MILL CONFIGURATION - 2HI TOP
3"Cap, HAVEN, No. 912A, DOUBLE END TUBE FINISHING MACHINE (13804)
$RFQ
3"Cap, HAVEN, No. 912A, DOUBLE END TUBE FINISHING MACHINE (13804)
MACHINE 13804 3" HAVEN MODEL #912A DOUBLE END TUBE FINISHING MACHINE Manufacturer: Haven Age: 1998 Model: 912A Specifications: OD Capacity: 1/2" TO 3" Wall thickness Capacity: 0.028" to 0.12" Cycle Rate: 100
8.5" x 1.250" RUESCH MODEL 189, RING SLITTING LINE (13807)
$RFQ
8.5" x 1.250" RUESCH MODEL 189, RING SLITTING LINE (13807)
MACHINE 13807 Ruesch Model #189 Slitting Line -Thickness Range: 0.0005" to 0.020" -Speed: 300 FPM Max. -Line Direction: Right to Left Consisting of the following: -Uncoiler: Rapid-Air Model:
SKIVING/EDGING PRODUCTION LINE (13806)
$RFQ
SKIVING/EDGING PRODUCTION LINE (13806)
MACHINE 13806 Skiving / Edging production line Powered payoff: 6,000 lbs (2,728 Kilos) max weight 62" (1,575mm) Max OD Oscillate or Flat Coils Hydraulic Mandrel 16" (406mm) ID (shoes for 20" (508mm) ID) 20 HP DC
50,000 Lb. (22,680 Kg), VAUGHN, SINGLE CHAIN DOUBLE PULL, 40 FPM, 150 HP (13803)
$RFQ
50,000 Lb. (22,680 Kg), VAUGHN, SINGLE CHAIN DOUBLE PULL, 40 FPM, 150 HP (13803)
MACHINE #13803 SPECIFICATIONS: MANUFACTURER ......... VAUGHN SERIAL ............... 61EC CAPACITY ............. 50,000 LBS. CONSTRUCTION ......... Single Chain Double Pull BENCH TABLE LENGTH ... 38' (11.58m) SPEED ......
30,000 Lb. (13,608 KG), BREDA, FOR TUBE OR BAR, 39 FT. (12m) DRAW (13801)
$RFQ
30,000 Lb. (13,608 KG), BREDA, FOR TUBE OR BAR, 39 FT. (12m) DRAW (13801)
MACHINE #13801 SPECIFICATIONS: MANUFACTURER: BREDA S.P.A. (ITALY) TYPE: CHAIN DRAWBENCH FOR TUBE OR BAR MAX. PULLING FORCE: 33,864 LBS. (14 M.T.) No. OF DIES: 1 No. OF CHAINS: 1 SIDE DISCHARGE MAX. LENGTH OF DRAW: 39 FT.
15,000 Lb. (6,804 Kg), BREDA, FOR TUBE OR BAR, 23 FT. (7m) DRAW (13800)
$RFQ
15,000 Lb. (6,804 Kg), BREDA, FOR TUBE OR BAR, 23 FT. (7m) DRAW (13800)
MACHINE #13800 SPECIFICATIONS: MANUFACTURE: BREDA S.P.A. (ITALY) TYPE: CHAIN DRAWBENCH FOR TUBE OR BAR MAX. PULLING FORCE: 15,432 LBS. (7 M.T.) No. OF DIES: 1 No. OF CHAINS: 1 SIDE DISCHARGE MAX. LENGTH OF DRAW: 23 FT. (
Grieve 38" x 38" x 26"L 850F Cabinet Oven
$RFQ
Grieve 38" x 38" x 26"L 850F Cabinet Oven
Grieve 38" x 38" x 26"L 850F Cabinet Oven, stainless interior, removable shelves, 230 Volt, 20 KW, Honeywell solid state controls.
  • Chamber width: 38"
  • Chamber length: 26"
    Despatch 48"W x 42"H x 30" Class A Solvent, 650F Oven
    $RFQ
    Despatch 48"W x 42"H x 30" Class A Solvent, 650F Oven
    Despatch 48"W x 42"H x 30" Class A Solvent rated cabinet oven, 650F - type 304 stainless interior, powered exhaust, horizontal air flow, 460 Volt, 32 KW, solid state programmable controls, like new conditi
    • Chamber width: 42"
    • Chamber length: 30"
      8 HEAD OAKLEY MODEL R1 TUBE REDUCING MILL (13798)
      $RFQ
      8 HEAD OAKLEY MODEL R1 TUBE REDUCING MILL (13798)
      MACHINE 13798 Manufacturer: S A Oakley Co, Chicago, IL USA Type Mill: Tube Reducing Model: R1 Serial: 50-525 Number of Reduction Heads: 8 Plea
      Ex-Cell-O Model 58-10101 Tube Reducing Mill (13797)
      $RFQ
      Ex-Cell-O Model 58-10101 Tube Reducing Mill (13797)
      MACHINE 13797 Manufacturer: Ex-Cell-O Model: 58-10101 Serial Number: 10012 Capacity: 0.437" to 0.375" (11.1mm to 9.525mm) Roll Configuration: 4 Vertica
      54" (1371mm) x 9" (228mm), LOOPCO, 40,000 Lbs, 0.010"-.250" MILD STEEL
      $RFQ
      54" (1371mm) x 9" (228mm), LOOPCO, 40,000 Lbs, 0.010"-.250" MILD STEEL
      MACHINE 13793 MANUFACTURER: LOOPCO Capacity: 0.010" - 0.250" Mild Steel Coil Weight: 40,000# Line Direction: Right to Left Consisting of: -Entry Coil Car: Revolvator 40,000# Capacity 60" wide Bed 72" O.D. Capacity (2) -
      54" (1371mm) x 6" (152mm), BRANER, 20,000 Lbs., 0.012"-0.120" (13792)
      $RFQ
      54" (1371mm) x 6" (152mm), BRANER, 20,000 Lbs., 0.012"-0.120" (13792)
      MACHINE 13792 MANUFACTURER: BRANER SERIAL #: SL4488 YEAR: 1983 Material: CR, Mild Steel Coil Weight: 20,000 Lbs Material Thickness: 0.012" - 0.120" Maximum Coil Width: 54" Slitting Capacity: 20 cuts
      50" (1270mm) x 8.5" (216mm), LOOPCO/STAMCO, 40,000 Lb., 0.044"-.269" (
      $RFQ
      50" (1270mm) x 8.5" (216mm), LOOPCO/STAMCO, 40,000 Lb., 0.044"-.269" (
      MACHINE 13789 50" x .250" x 40,000 Lbs. Loopco/Stamco Slitting Line (Used) General Specifications: Manufacturer: Loopco/Stamco Width Capacity: 50" Weight Capacity: 40,000 Lbs. Gauge Thickness: .044"-.269" Entry & Exit I.
      50" (1270mm) x 6" (152mm), BRANER, 20,000 Lb. COIL SLITTING LINE (13788)
      $RFQ
      50" (1270mm) x 6" (152mm), BRANER, 20,000 Lb. COIL SLITTING LINE (13788)
      MACHINE 13788 SERIAL #: SL4488 YEAR: 1983 Material: CR, Mild Steel Coil Weight: 20,000 Lbs Material Thickness: 0.012" - 0.120" Maximum Coil Width: 54" Slitting Capacity: 20 cuts of 0.018" 20 cuts of
      48" (1219mm) x 7" (178mm) LOOPCO, 40,000 Lbs, 0.015"-.080" LEFT TO RIG
      $RFQ
      48" (1219mm) x 7" (178mm) LOOPCO, 40,000 Lbs, 0.015"-.080" LEFT TO RIG
      MACHINE 13790 48" x .015" - .080" X 40,000 LBS. LOOPCO SLITTING LINE (USED) General Specifications: Manufacturer: Loopco Width: 48" Gauge Range: .015" - .080" Weight Capacity: 40,000 Lbs. Line Direction: Left to Right Fo
      48" (1219mm) x 4.75" (121mm) BRANER 20,000# SLITTING LINE (13786)
      $RFQ
      48" (1219mm) x 4.75" (121mm) BRANER 20,000# SLITTING LINE (13786)
      MACHINE 13786 48" x 4.75" x 20,000lb Slitting Line YEAR: 1965 -48" Wide -20,000 lb. Capacity -Line Direction: Left to Right Consisting of the following: -Entry Coil Car: Progressive, New in 1993 Model: 82493 S/N: 2952 "L
      48" (1219mm) x 4.5" (114mm), A R M, 20,000 Lbs, SLITTING LINE (13791)
      $RFQ
      48" (1219mm) x 4.5" (114mm), A R M, 20,000 Lbs, SLITTING LINE (13791)
      MACHINE 13791 48" x 4.5" x 20,000 Lb. A.R.M. Slitting Line CONSISTING OF: 10,000 Lb. AMERICAN STEEL LINE #1000 Motorized Uncoiler: Coil I.D.: 16" to 20" Coil O.D.: 60" Coil Width: 52" Manual Expansion Variable Speed D
      3 1/2"(88.9mm) x 11" (280mm) x 14" (356mm), BHS-TORIN, 2/4 HI (13795)
      $RFQ
      3 1/2"(88.9mm) x 11" (280mm) x 14" (356mm), BHS-TORIN, 2/4 HI (13795)
      MACHINE 13795 MANUFACTURER: BHS-TORIN, FARMINGTON, CT USA TYPE MILL: 2/4 HIGH ROLLING MILL WORK ROLLS: 3.5" (88.9mm) DIAMETER X 14" (356mm) WIDE BACK UP ROLLS:
      6 STAND TANDEM FENN WIRE ROD MILL START 1/2" (12.7mm) - 0.100 (2.54mm) (13785)
      $RFQ
      6 STAND TANDEM FENN WIRE ROD MILL START 1/2" (12.7mm) - 0.100 (2.54mm) (13785)
      MACHINE 13785 FENN 6-STAND TANDEM MILL ROD MILL MANUFACTUER: FENN MANUFACTURING SPECIFICATIONS: MILL REDUCTION: APPROXIMATELY 0.500" (12.7mm) ROUND MATERIAL DOWN TO APPROXIMATELY 0.115" (2.9m
      Categories:
      Condition:
      Manufacturer:
      Location:
      • X Connecticut (702)
      Price:
      •  to 
      1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>