buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Pennsylvania

Machine Tools in Pennsylvania For Sale

1260 new & used machine tools items for sale in Pennsylvania
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 1 - 20 of 1260 matches
Sort by:
Items Per Page:  20  |  50 |  100
47" x 157" CNC roll lathe, Binns & Berry, 1997, excellent
CNC Binns & Berry Roll lathe, 47" x 157" new 1997
  • Swing: 47"
  • Centers: 157"
    52" x 6" x 30,000# loop type, slitting Line, Paxson, complete
    Paxson loop type, driven head, slitting line, complete, two drop in heads, entry above ground coil car, entry peeler/pinch rolls, driven slitting head, cross over table, tension stand, recoiler, coil push off, to turnsti
    • Maximum workpiece width: 52"
    • Maximum workpiece thickness: 0"
      3" Bar straightener, Two roll, Farmer Norton, with tables
      Two roll, single motor drive, Farmer Norton, with entry and exit bar handling tables, all motors and electrical controls, good condition
      • Bar diameter: 3"
      • Tube diameter: 5"
        60" x 40,000# Recoiler, Paxson, hydraulic expansion & push off
        Paxson Recoiler, 60" wide x 40,000#, 50hp, hydraulic push off, hydraulic mandrel expansion 20" ID, brake, complete
        • Maximum weight capacity: 40000Lb
        • Maximum coil width: 60"
          4" Bar Peeler, Farmer Norton, complete with tables 1970's
          Farmer Norton Bar Peeler, complete with entry and exit bar handling tables, all motors and electrical controls, good condition. Age 1970's
          • Maximum bar diameter: 4"
            2" Bar Peeler- Farmer Norton, tables included, good condition
            Farmer Norton, new 1970, with entry and exit tables, complete with all motors, controls, very good condition
            • Maximum bar diameter: 2"
              Penn 1AMTS Wire Bender  .250" - .625"
              No description providedCapacity8 Pieces of 1/4" Wire Rotation420 Degrees Rotating Disc10" Table Size2' x 5' Approx. Weight750 LBS 6 Position Turret Foot Pedal Operati
              H FRAME CLICKER PRESS
              H FRAME CLICKER PRESS PRICE: Loaded on Truck, Our Warehouse, York, PA …… $ POR HMC Stock # 20070 Machine Serial No.: Unknown Machine Model No.: Unknown New Date: Unknown Machine just purchased. Please check back l
              BRAND CNC PROFILE SURFACE GRINDER
              BRAND CNC PROFILE SURFACE GRINDER PRICE: Loaded on Truck, Our Warehouse, York, PA …… $39,500.00 HMC Stock # 20068-P Machine Serial No.: 841/01 Machine Model No.: 700 NE New Date: 2000 PRELIMINARY SPECIFICATIONS: T
              CYCLOTRON COOLANT with FILTER SYSTEM
              CYCLOTRON COOLANT SYSTEM PRICE: Loaded on Truck, Our Warehouse, York, PA …… $6,950.00 HMC Stock No. 18095-P Machine Serial No. 3163-15 Machine Model No. Unknown New Date: 2015 Gravity Feed System with Paper Filter Co
              NASA Producer 5-axis CNC bridge mill, Fagor 8055, 22" x 26" table
              Here is a Nasa Producer 5-axis CNC bridge type machining center. This machine only machined gold at a jewelry manufacturer. The control is a Fagor 8055 with firmware for up to 7-axis simultaneous interpolation. It has RS
              Tesker 840 Thread Roller
              No description providedDiameterMax Diameter 24" Rolling Pressure500,000 LBS Continuous / 600,000 Intermittent Spindle Diameter5 1/2" Die Face (Maximum)15" Die Diameter (Maximum)16" Spindle RPM2-50 Hydraulic Capacity200 G
              1/4" RMG Model 14 Wire Straighten & Cut Machine
              No description providedWire Diameter Range.050" - .250" (1.27mm - 6.35mm) Electrics480 V / 60 Cycle / 3 Phase Maximum Cutoff Length4' Minimum Cutoff Length3" (76.2mm) Production SpeedUp to 4 cuts per second or 400 FPM Le
              3/16" Sacma Model SP-01 DSSD Cold Header
              No description providedMaximum Cutoff Diameter3/16" Maximum Length Under Head1-3/8" Maximum Cutoff Length2" Maximum Production350 PPM Approx. Weight3,600 lbs Electrics240/460 Volts Approx. Floor Size79" L X 35"W X 44"H
              3/16" Sacma Model SP-01 DSSD High Speed Cold Header
              No description providedMaximum Cutoff Diameter3/16" Maximum Length Under Head1-3/8" Maximum Cutoff Length2" Maximum Production350 PPM Approx. Weight3,600 lbs Electrics240/460 Volts Approx. Floor Size79"L x 35"W x 44"H
              3/16" Sacma DSSD Model SP-01  High Speed Cold Header
              No description providedMaximum Cutoff Diameter3/16" Maximum Length Under Head1-3/8" Maximum Cutoff Length2" Maximum Production350 PPM Approx. Weight3,600 lbs Electrics240/460 Volts Approx. Floor Size79"L x 35"W x 44" H
              Fenn 2F Swager
              No description providedCapacity Tubing1" (25.4mm) Capacity Solids13/32" (10.3mm) Die Length1 7/8" (47.6mm) Die Width1 5/8" (41.3mm) Die Height1 1/8" (28.6mm) Approx. Floor Size28" x 32" Motor3 HP Approx. Weight1600 LBS
              1/8" Waterbury #0 DSSD Toggle Cold Header
              No description providedMaximum Cutoff Diameter1/8" Maximum Cutoff Length1" Maximum Feed Length1-1/2" Maximum Production150 PPM Approx. Weight1350 lbs Approx. Floor Size32" x 40"
              Kinefac Model MC-5-F Cylindrical Thread Roller - With Oil Centrifuge System
              No description providedMaximum Infeed Diameter2" Maximum Thread Die Length2-1/4" Spindle Diameter2" With Oil Centrifuge System
              Fenn 5F 4 Die Swager with 7 Sets of Dies
              No description providedCapacity - Tubing3-3/8" Capacity - Solid Diameter1-1/2" Bore thru Spindle3-7/8" Spindle Speeds194 RPM Die Size - Width3-1/8" Die Size - height3-1/4" Die Size - Length5" Motor15 HP Approx. Weight750
              Location:
              • X Pennsylvania (1260)
              Price:
              •  to 
              1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>