buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Used

Used Machine Tools For Sale

14201 used machine tools items for sale
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 1 - 20 of 14201 matches
Sort by:
Items Per Page:  20  |  50 |  100
DMG MORI CMX1100V 4th axis CNC Vertical Machining Center
$RFQ
DMG MORI CMX1100V 4th axis CNC Vertical Machining Center
DMG MORI CMX1100V 4th AXIS CNC VERTICAL MACHINING CENTER NEW-2017 SPECIFICATIONS: Max. X-axis travel: 43.3" Max. Y-axis travel: 22" Max. Z-axis travel: 20.1" Max. table load: 2,200 lbs Table length:
DMG MORI NLX2500SY/700 CNC TURNING CENTER
$RFQ
DMG MORI NLX2500SY/700 CNC TURNING CENTER
DMG MORI NLX2500SY/700 CNC TURNING CENTER NEW-2017 SPECIFICATIONS: Max Turning Diameter: 14.40" Max Turning Length: 27.7" Max Swing Diameter: 36.22" Swing over cross slide: 29.2" Max Bar Capacity Diamete
SUPERTEC MODEL STC-24 CNC CENTERLESS GRINDER
$RFQ
SUPERTEC MODEL STC-24 CNC CENTERLESS GRINDER
SUPERTEC MODEL STC-24 CNC CENTERLESS GRINDER New 2008 Motor Driven with 20/30 HP, 3-Phase, 60 Cycle, Grinding Wheel Motor, 2 HP Hydraulic Motor, 3 KW Infeed Servo Motor EQUIPPED WITH: Fanuc Oi-TC CNC Control
NAKAMURA TOME WT-300MMSY 8-AXIS CNC TURNING/MILLING CENTER
$RFQ
NAKAMURA TOME WT-300MMSY 8-AXIS CNC TURNING/MILLING CENTER
NAKAMURA TOME WT-300MMSY 8-AXIS CNC TURNING/MILLING CENTER New 2005 EQUIPPED WITH Fanuc 18i-TB CNC Controls Cylindrical Interpolation Polar Coordinate Interpolation Thread Cutting Continuous Thread Cutting
16" X 25" HYD-MECH M16A AUTOMATIC MITRE CUTTING HORIZONTAL BANDSAW
$RFQ
16" X 25" HYD-MECH M16A AUTOMATIC MITRE CUTTING HORIZONTAL BANDSAW
16" X 25" HYD-MECH M16A AUTOMATIC MITERING HORIZONTAL BAND SAW Serial No.   S0900160                                    
WANDERER MODEL 31M HORIZONTAL SPLINE HOBBER & THREAD MILLER
$RFQ
WANDERER MODEL 31M HORIZONTAL SPLINE HOBBER & THREAD MILLER
WANDERER MODEL 31M HORIZONTAL SPLINE HOBBER & THREAD MILLER EQUIPPED WITH: Heavy Duty Head, Universal Head for Thread Milling, (2) Steady Rests, (1) Follow Rest, Large Quantity of Change Gears, 12" 3-Jaw Chuck
OKUMA MB-5000H 4-AXIS HIGH SPEED, THERMALLY-STABLE HORIZONTAL MACHINING CENTER
$RFQ
OKUMA MB-5000H 4-AXIS HIGH SPEED, THERMALLY-STABLE HORIZONTAL MACHINING CENTER
OKUMA MB-5000H 3-AXIS HIGH SPEED, THERMALLY-STABLE HORIZONTAL MACHINING CENTER New 2018 0 Hours Never Been Run Motor Driven with 30/22 HP Spindle Drive and Controls EQUIPPED WITH: P300 Okuma  C
MAZAK VARIAXIS 500-5X 5-AXIS CNC VERTICAL MACHINING CENTER
$RFQ
MAZAK VARIAXIS 500-5X 5-AXIS CNC VERTICAL MACHINING CENTER
MAZAK VARIAXIS 500-5X 5-AXIS CNC VERTICAL MACHINING CENTER New 2005 Motor Driven with 30 Min. 20 HP Continuous Spindle Motor and Controls EQUIPPED WITH: Mazatrol 640M-5X CNC Controls, 40 Position Automatic Tool
NEW 24" x 87" SHARP MODEL SH-2487 AUTOMATIC TRAVELING COLUMN SURFACE GRINDER
$RFQ
NEW 24" x 87" SHARP MODEL SH-2487 AUTOMATIC TRAVELING COLUMN SURFACE GRINDER
NEW 24" x 87" SHARP MODEL SH-2487 AUTOMATIC TRAVELING COLUMN SURFACE GRINDER One piece T shape base casting ensures perfect alignment of longitudinal and cross movemen
JET IBG-10, 10" Industrial Bench Grinder
$RFQ
JET IBG-10, 10" Industrial Bench Grinder
JET IBG-10, 10" Industrial Bench Grinder FEATURES:• Heavy duty capacitor motor• Sealed bearings for maintenance free grinding• CSA/CUS Certified• Heavy duty construction for demanding environme
ROEDERS MODEL RP 800 3-AXIS HIGH SPEED VERTICAL MACHINING CENTER
$RFQ
ROEDERS MODEL RP 800 3-AXIS HIGH SPEED VERTICAL MACHINING CENTER
ROEDERS MODEL RP 800 3-AXIS HIGH SPEED VERTICAL MACHINING CENTER     New 2002 Motor Driven with 23 HP, 3-Phase, 60 Cycle, AC Spindle Drive EQUIPPED WITH: Roeders Rms6 CNC Controls , 80 Gig Hard Dr
FUJI ANW 41T TWIN SPINDLE CNC LATHE WITH ROBOT
$RFQ
FUJI ANW 41T TWIN SPINDLE CNC LATHE WITH ROBOT
FUJI ANW 41T TWIN SPINDLE CNC LATHE WITH ROBOT New 1999 Motor Driven with 30 HP, 3-Phase, 60 Cycle, AC Motor and Controls on each Spindle EQUIPOPED WITH: Fanuc 0-TT CNC Controls, RS 232 Port, Fuji BC-20 Robot wi
1-1/2" ROYAL MASTER MODEL TG12X3 CENTERLESS GRINDER
$RFQ
1-1/2" ROYAL MASTER MODEL TG12X3 CENTERLESS GRINDER
1-1/2" ROYAL MASTER MODEL TG12X3 CENTERLESS GRINDER Serial No. 1669 Remanufactured by Royal Master 2004 Motor Driven with 7-1/2 HP, 3-Phase, 60 Cycle, AC Motor and Controls EQUIPPED WITH: Thru Feed Grinding, Ro
35 TON BLISS C-35 OPEN BACK INCLINABLE (OBI) PRESS
$RFQ
35 TON BLISS C-35 OPEN BACK INCLINABLE (OBI) PRESS
35 TON BLISS C-35 OPEN BACK INCLINABLE (OBI) PRESS Serial No. H64403/HP48463    New 1972   EQUIPPED WITH: Air Clutch & Brake, Air Counter Balance, Air Surge Tank, Diagnostic System Display,
60 TON BLISS C-60 GAP FRAME PRESS
$RFQ
60 TON BLISS C-60 GAP FRAME PRESS
60 TON BLISS C-60 GAP FRAME PRESS New 1995 Motor Driven 7.5 HP, 3-Phase, 60 Cycle, AC Motor & Controls EQUIPPED WITH: Free Standing Control System, Air Clutch & Brake, Air Surge Tanks, Inch/Single Stroke
3.15" TOS MODEL WH80 TABLE TYPE HORIZONTAL BORING MILL WITH BUILT-IN ROTARY TABLE
$RFQ
3.15" TOS MODEL WH80 TABLE TYPE HORIZONTAL BORING MILL WITH BUILT-IN ROTARY TABLE
3.15" TOS MODEL WH80 TABLE TYPE HORIZONTAL BORING MILL WITH BUILT-IN ROTARY TABLE New 1966 Motor Driven with 10HP, 3-Phase, 60 Cycle, AC Motor & Controls EQUIPPED WITH: Facing Head, Tailstock, 39" x 43" Buil
MORI SEIKI SL-75B CNC TURNING CENTER
$RFQ
MORI SEIKI SL-75B CNC TURNING CENTER
MORI SEIKI SL-75B CNC TURNING CENTER New 1997 EQUIPPED WITH Mori Seiki MSC-516 CNC Controls Tailstock Chip Conveyor SPECIFICATIONS Chuck Size 24" 3-Jaw Max. Machining Diameter 30" Max. Machining Lengt
NEW KENT USA JNG-3000 KNIFE GRINDER
$RFQ
NEW KENT USA JNG-3000 KNIFE GRINDER
NEW KENT USA MODEL JNG-3000 KNIFE GRINDER PRODUCT HIGHLIGHTS Dual coarse and fine grinding wheels allow for grinding efficiency and fine finish Minimum 0.005mm infeed Manual and auto grinding cycles; # of p
NEW KA SHUN MODEL 7250 WT CNC LATHE WITH C-AXIS AND LIVE TOOLING
$RFQ
NEW KA SHUN MODEL 7250 WT CNC LATHE WITH C-AXIS AND LIVE TOOLING
NEW KA SHUN MODEL 7250 WT CNC LATHE WITH C-AXIS AND LIVE TOOLING  Serial No. 1N223                      
HITACHI SEIKI MODEL VA-85 3-AXIS CNC VERTICAL MACHINING CENTER
$RFQ
HITACHI SEIKI MODEL VA-85 3-AXIS CNC VERTICAL MACHINING CENTER
HITACHI SEIKI MODEL VA-85 3-AXIS CNC VERTICAL MACHINING CENTER New 1986 Motor Driven with 20/25 HP Spindle Drive Motor and Controls EQUIPPED WITH: Fanuc 11M CNC Controls, 30 Position ATC, Coolant, Chip Conveyor&
Categories:
Condition:
  • X Used (14201)
Manufacturer:
Location:
Price:
  •  to 
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>