buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Massachusetts

Machine Tools in Massachusetts For Sale

171 new & used machine tools items for sale in Massachusetts
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9
Refine: Viewing 1 - 20 of 171 matches
Sort by:
Items Per Page:  20  |  50 |  100
Gleason 572 GLEASON Cutter Sharpening Machine
$RFQ
Gleason 572 GLEASON Cutter Sharpening Machine
Model No. 572 GLEASON Creep-Feed Cutter Sharpening Machine, suitable for the sharpening of spiral bevel cutters from 1.3” to 21” diameter, as employed on the GLEASON 5-cut methodology sp
Model No. CB GLEASON Phoenix “CNC” cutter building machine
$RFQ
Model No. CB GLEASON Phoenix “CNC” cutter building machine
Model No. CB GLEASON Phoenix “CNC” controlled, face cutter set-up and measuring fixture, suitable for the building of “face-milling” and “face-hobbing” cutter-heads with a minimal radial run-out. Spi
Gleason - Model No. 300-CG “CNC” Spiral Bevel Gear Cutter Sharpener
$RFQ
Gleason - Model No. 300-CG “CNC” Spiral Bevel Gear Cutter Sharpener
- Model No. 300-CG GLEASON “CNC” Spiral Bevel Gear Cutter Sharpening Machine, suitable for the face sharpening of single-side GLEASON “TRIPLEX-Style “face mill cutters” in one set-up, as well as for the profile sharp
KLINGELNBERG WNC 80 “CNC” spiral bevel gear grinding machine
$RFQ
KLINGELNBERG WNC 80 “CNC” spiral bevel gear grinding machine
– Model No. WNC 80 KLINGELNBERG “CNC” spiral bevel gear grinding machine suitable for the hard finishing of spiral bevel and hypoid bevel gears and pinions which are pre-machined with cutter heads in either face milli
GLEASON 175HC Phoenix “CNC” Spiral Bevel Gear Generator
$RFQ
GLEASON 175HC Phoenix “CNC” Spiral Bevel Gear Generator
Model No. 175HC GLEASON Phoenix 6-Axis “CNC” Spiral Bevel Gear Generator, suitable for the face-hobbing of spiral bevel gears and pinions up to 7.5” (190mm) diameter, and the “face-milling” of spiral bevel gears and pini
CARIMATI CTU 40 radial arm drilling machine
$6,500
CARIMATI CTU 40 radial arm drilling machine
CARIMATI radial arm drilling machine. Model CTU 40. INCLUDES 40 various bits!! Make an offer...
Cincinnati Bickford 9" Column Radial Arm Drill
$RFQ
Cincinnati Bickford 9" Column Radial Arm Drill
9" Column with Adjustable Table
  • Column diameter: 9"
    MONARCH 20.5 x 48 Engine Lathe
    $RFQ
    MONARCH 20.5 x 48 Engine Lathe
    1 5/8" Spindle Hole, 3 and 4 Jaw Chucks, Dickerson Toolholder with Holders and steadyrest.
    • Swing: 20.5"
    • Centers: 48"
      40 Ton Edwards Iron Worker 3ph, 230v - SUPER NEGOTIABLE
      $RFQ
      40 Ton Edwards Iron Worker 3ph, 230v - SUPER NEGOTIABLE
      SPECIFICATIONS Angle Shear Max Cap.: 3" x 3" 1/4" Angle Shear Work Height: 52-1/2" Dimensions 60-1/2" H X 32"W X 23" DEEP Flat Bar Shear Max Cap.: 3/8 ' x 10" or 1/2"
      50 Ton Edwards Iron Worker 5HP, 3PH, 230V - SUPER NEGOTIABLE
      $RFQ
      50 Ton Edwards Iron Worker 5HP, 3PH, 230V - SUPER NEGOTIABLE
      SPECIFICATIONS Angle Shear Max. Cap. 3" x 3" x 3/8" or 4" x 4" x 1/4" Angle Shear Work Height 39-7/8" Coper Notcher Max. Capacity 2" x 3" x 5/16" Coper Notcher Work
      JET AB 1012W 10" Automatic Horizontal Band Saw
      $RFQ
      JET AB 1012W 10" Automatic Horizontal Band Saw
      BRAND NEW JET AUTOMATIC 10" HORIZONTAL BAND SAW AB1012W #480022 Make: Jet Model: AB1012W Part Number 414462 Main Motor 3HP, 230V, 3 Phase Cutting Capacity (in.) 10 x 12 Round at 90 Degrees (in.) 1
      • Width capacity: 10"
      • Height capacity: 12"
        Jet CNC #CL-1640ZX w Anilam 4200T part#320930
        $RFQ
        Jet CNC #CL-1640ZX w Anilam 4200T part#320930
        BRAND NEW JET CNC LATHE W/ Anilam 4200T Control MODEL: CL-1640ZX-CNC 16" x 40" (Part #320930) (inv #480020) Swing over Bed (in.): 16 Swing over Cross Slide (in.): 8 Swing Through Gap (in.): 25-
        • Swing: 16"
        • Centers: 40"
          Mr Deburr - C&M Topline #600DB 6.5 Cubic Foot rectangular Vibratory Fin
          $RFQ
          Mr Deburr - C&M Topline #600DB 6.5 Cubic Foot rectangular Vibratory Fin
          Make: MR. DEBURR Model #: 600DB Capacity:6.5 Cubic Feet SPECIFICATIONS: Inside tank dimensions: Length 35" x Depth 18.75" x Width 18" Motor: 3HP, 3PH, 230Volts, 8.8 F.L.A. 3HP, 3PH, 440Volts, 4.4
          Mr Deburr - C&M Topline #300DB 3 Cubic Foot Rectangular Vibratory Tumbl
          $RFQ
          Mr Deburr - C&M Topline #300DB 3 Cubic Foot Rectangular Vibratory Tumbl
          MAKE: MR DEBURR MODEL #: 300DB Capacity: 3 Cubic Feet SPECIFICATIONS: Inside tank dimensions: Length 31" x Depth 13" x Width 13.5" Motor: 1 HP, Single Phase, 110 volts @ 60 hertz or 220 volts @ 60 he
          0.75 Cubic Foot C&M Topline #TL75 Vibratory Bowl
          $RFQ
          0.75 Cubic Foot C&M Topline #TL75 Vibratory Bowl
          3" Dump Chute (with expansion plug/bowl drain), 1/2HP, 70 Lbs., 29" Work Height
          0.50 Cubic Foot C&M Topline #TL50 Vibratory Bowl
          $RFQ
          0.50 Cubic Foot C&M Topline #TL50 Vibratory Bowl
          2.5" Dump Chute (with expansion plug/bowl drain),61 Lbs., 26.5" high, Available 110 V @ 60 Hz or 220 V @ 50 Hz
          0.25 Cubic Foot C&M Topline #TL25 Vibratory Bowl
          $0
          0.25 Cubic Foot C&M Topline #TL25 Vibratory Bowl
          2" Dump Chute Capacity (with exp plug/bowl drain),1/4 HP, 40Lbs.,19.5"High
          AMERICAN Hole Wiazard Radial Arm Drill
          $RFQ
          AMERICAN Hole Wiazard Radial Arm Drill
          1957 AMERICAN HOLE WIZARD RADIAL ARM DRILL #101766 MAKE: American MODEL: Hole Wizard AGE: 1957 ARM: 6’ COLUMN: 15” TAPER: #4 Morse Taper SPEED: 20 – 1600 RPM
          • Arm length: 6'
          • Column diameter: 15"
            250Lb., BAILIEGH, No. WP-1800, 8" Chuck,2-3/8" through hole,0-6Rpm,Foot pedal co
            $RFQ
            250Lb., BAILIEGH, No. WP-1800, 8" Chuck,2-3/8" through hole,0-6Rpm,Foot pedal co
            swpc(1,"http://uen.hsix.com/machpict/013510/470003.jpg")
            50 KVA,PEI,17" Throat,PX1500 Control,480V,1PH,60Hz,(2 avail),late'90s Nevins Machiner
            $RFQ
            50 KVA,PEI,17" Throat,PX1500 Control,480V,1PH,60Hz,(2 avail),late'90s Nevins Machiner
            Categories:
            Condition:
            Manufacturer:
            Location:
            • X Massachusetts (171)
            Price:
            •  to 
            1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9