buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Minnesota

Machine Tools in Minnesota For Sale

144 new & used machine tools items for sale in Minnesota
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8
Refine: Viewing 1 - 20 of 144 matches
Sort by:
Items Per Page:  20  |  50 |  100
Cincinnati No. 5 Horizontal Milling Machine
$RFQ
Cincinnati No. 5 Horizontal Milling Machine
Cincinnati No. 5 Horizontal Milling Machine, 94" x 20" T-Slotted Table, 50" Longitudinal Table Travel, 16" Cross Table Travel, 20" Vertical Knee Travel, 20" Max Between Spindle Center and Ta
  • Table width: 20"
  • Table length: 94"
    Nider Type NI70 Geared Head Drill Press
    $RFQ
    Nider Type NI70 Geared Head Drill Press
    Nider Type NI70 Geared Head Drill Press, 20-1/4" x 16-3/4" T-Slotted Table, 13" throat, #4 MT Spindle, 50-900 rpm Spindle Speeds, Spindle Counter Balance System, Work Light, 1.8 hp, 220 volt, 3-phase, s/n:
    Lieber Gap Bed Engine Lathe 38/54" x 160"
    $RFQ
    Lieber Gap Bed Engine Lathe 38/54" x 160"
    Lieber Gap Bed Engine Lathe, 54" Swing over Gap, 38" Swing over Bed, 24" Swing over Cross Slide, Approx. 160" Max Between Centers, 48" 4-Jaw Chuck, 17-1/2" Gap Length, Inch and Metric Thread
    • Swing: 54"
    • Centers: 160"
      Lincoln R3S-600 Ideal Arc CV DC Welding Power Source
      $RFQ
      Lincoln R3S-600 Ideal Arc CV DC Welding Power Source
      Lincoln Model R3S-600 Ideal Arc CV DC Welding Power Source, 600 amps, 44 volts @ 80% Duty Cycle, 61 Max OCV, Ground Clamp, 230/460 volt, 3-phase, s/n: AC455693
      • Power: 600AMP
        Harrison Model M500 Gap Bed Engine Lathe
        $RFQ
        Harrison Model M500 Gap Bed Engine Lathe
        Harrison Model M500 Gap Bed Engine Lathe, 21" Swing over Bed, 14-1/2" Swing over Cross Slide, 80" Max Distance Between Centers, 3-1/8" Hole Thru Spindle, (18) Speeds from 31 - 1600 rpm, Inch/Metric Th
        • Swing: 21"
        • Centers: 80"
          Ooya Model RE-1225H Radial Arm Drill
          $RFQ
          Ooya Model RE-1225H Radial Arm Drill
          Ooya Machinery Works Model RE-1225H Radial Arm Drill. 12" Column Diameter, 48" Arm Length, (12) Spindle Speeds from 38-1985 rpm, (6) Feeds from .003 to .039 IPR, #5 MT Spindle, 2-3/8" Spindle Diameter, 11-
          • Arm length: 4'
          • Column diameter: 12"
            Cincinnati Type No. 4 Vertical Milling Machine
            $RFQ
            Cincinnati Type No. 4 Vertical Milling Machine
            Cincinnati Type No. 4 Vertical Milling Machine, 80" x 17" T-Slotted Table, 50 Taper Spindle, .0010 - .0155" Feeds, 3-Phase, 100" x 88" x 100" Overall. (Note: Needs new Clutches)
            • Table width: 17"
            • Table length: 80"
              Hyd-Mech Model S-20P Horizontal Bandsaw
              $RFQ
              Hyd-Mech Model S-20P Horizontal Bandsaw
              Hyd-Mech Model S-20P Horizontal Bandsaw, 12" x 16" Capacity, 90 - 370 fpm Blade Speeds, Hydraulic Clamping, Cycle Counter, Work Light, 10' x 14" Roller Table, 3 hp, 200/230/460 volt, 3-phase, s/n: 406
              • Width capacity: 12"
              • Height capacity: 16"
                Acme Machine Tool No. 2 Turret Lathe
                $RFQ
                Acme Machine Tool No. 2 Turret Lathe
                Acme Machine Tool No. 2 Turret Lathe, 22" Swing over Bed, 12" Swing over Cross Slide, 42" max Between Centers, 12" 3-Jaw Chuck, 6-Position Turret, 4-Way Tool Post, 3-3/4" Hole Thru Spindle, Taper
                • Chuck: 12"
                  Wells Index Model 747 Vertical Milling Machine
                  $RFQ
                  Wells Index Model 747 Vertical Milling Machine
                  Wells Index Model 747 Vertical Milling Machine, 9" x 46" T-Slotted Table, 34" Longitudinal Travel, 14" Cross Travel, 16" Vertical Knee Adjustment, 5" Quill Travel, 18" Spindle to Table,
                  • Table width: 9"
                  • Table length: 46"
                    Wroclaw Model TUR 63 Engine Lathe
                    $RFQ
                    Wroclaw Model TUR 63 Engine Lathe
                    Wroclaw Model TUR 63 Engine Lathe, 24" x 120" Rated Capacity, 17" Swing Over Cross Slide, 124" Maximum Between Centers, 18 Spindle Speeds: 18 to 1,800 RPM, 3 1/4" Hole Thru Spindle, 16" 4-Ja
                    • Swing: 24"
                    • Centers: 120"
                      Gisholt Model 3L Saddle Type Turret Lathe
                      $RFQ
                      Gisholt Model 3L Saddle Type Turret Lathe
                      Gisholt Model 3L Saddle Type Turret Lathe, 21.75" Swing Over Cross Slide, 28.5" Swing Over Bed, 51" Longitudinal Travel, 5" Through Hole, Pre-Select Head w/ 12 to 800-RPM Maximum, 20" 3-Jaw Chuck
                      • Chuck: 20"
                        U.S. Clearing (Torq-Pac) OBI Punch Press. Eccentric Type, 60-Ton Capacity
                        $RFQ
                        U.S. Clearing (Torq-Pac) OBI Punch Press. Eccentric Type, 60-Ton Capacity
                        U.S. Clearing (Torq-Pac) OBI Punch Press. Eccentric Type, 60-Ton Capacity, 7" Stroke, 14 1/4" Shut Height to Bed, 3" Ram Adjustment, 30"x18 1/4' Bed Area, 13"x10 3/4" Ram Area, 2 1/4&quo
                        • Tonnage: 60T
                        • Stroke: 7"
                          Chevalier FSG-1228AD Automatic Surface Grinder
                          $RFQ
                          Chevalier FSG-1228AD Automatic Surface Grinder
                          Chevalier FSG-1228AD Automatic Surface Grinder, 27-1/2" x 12" Electromagnetic Chuck, 28" Max Grinding Length, 12" Max Grinding Width, 14-3/4" Max Table to Spindle Center, Coolant Tank, Hydraulic
                          • Table width: 12"
                          • Table length: 28"
                            Holke Model F-10-V Vertical Milling Machine
                            $RFQ
                            Holke Model F-10-V Vertical Milling Machine
                            Holke Model F-10-V Vertical Milling Machine. 48" x 10" T-Slot Table, 15-3/4" Cross Travel, 16-1/2" Vertical Travel, 36" Longitudinal Travel, (16) Speeds from 68 - 5450 rpm, 2/3 C.V. Motor, 220 vo
                            • Table width: 478"
                            • Table length: 10"
                              Niagara No. 78-B Power Squaring Shear
                              $RFQ
                              Niagara No. 78-B Power Squaring Shear
                              Niagara No. 78-B Power Squaring Shear, 3/16" Capacity in Mild Steel, 5/32" in 18-8 SST, 8' Blade, Vacuum Sheet lifter with Over Arm System, Approx. 48"x32" Roller Table, 460 Volt, 3 Phase, s/n: 57
                              • Maximum thickness: 0.187"
                              • Cutting length: 96"
                                Fadal Model VMC4020HT CNC Vertical Machining Center
                                $RFQ
                                Fadal Model VMC4020HT CNC Vertical Machining Center
                                Fadal Model VMC4020HT CNC Vertical Machining Center, 43-1/2" x 20" T-Slotted Table, 40" X-Travel, 20" Y-Travel, 28" Z-Travel, (21) Position ATC, Cat 40 Spindle Taper, Fadal CNC88HS CNC Controls,
                                • X axis: 40"
                                • Y axis: 20"
                                  Makino Model EDNC43-A8MA Sinker Type EDM
                                  $RFQ
                                  Makino Model EDNC43-A8MA Sinker Type EDM
                                  Makino Model EDNC43-A8MA Sinker Type EDM, 27-1/2" x 19-5/8" T-Slotted Table, 17-3/4" X, 13-3/4" Y, 13-3/4" Z Travels, 33-1/2" x 25-1/2" x 15-3/4" Tank Dimensions, 15-3/4" Fill
                                  • Power: 20A
                                  • Table width: 27.5"
                                    Castek Mechatron Model Model SD22PPWCE EDM Drill
                                    $RFQ
                                    Castek Mechatron Model Model SD22PPWCE EDM Drill
                                    Castek Mechatron Model Model SD22PPWCE EDM Drill, 8" x 16" Slotted Table, 25.5" x 16.5" x 9.5" Maximum Workpiece Size, 11.8" X-Travel, 7.8" Y-Travel, 14.5" Z-Travel, 4" Workhe
                                    Bridgeport Series I Vertical Milling Machine
                                    $RFQ
                                    Bridgeport Series I Vertical Milling Machine
                                    Bridgeport Series I Vertical Milling Machine, 9" x 42" T-Slotted Table, 24" Longitudinal Table Travel, 12" Cross Table Travel, 16" Vertical Knee Adjustment, R8 Spindle Taper, Variable Speeds: 60
                                    • Table width: 9"
                                    • Table length: 42"
                                      Categories:
                                      Condition:
                                      Manufacturer:
                                      Location:
                                      • X Minnesota (144)
                                      Price:
                                      •  to 
                                      1 | 2 | 3 | 4 | 5 | 6 | 7 | 8