buy & sell, new & used machinery, machine tools & equipment

Machine Tools

Machine Tools For Sale

14348 new & used machine tools items for sale
<Prev | 673 | 674 | 675 | 676 | 677 | 678 | 679 | 680 | 681 | 682 | Next>
Refine: Viewing 13601 - 13620 of 14348 matches
Sort by:
Items Per Page:  20  |  50 |  100
Reid Precision Surface Grinder
$2,200
Reid Precision Surface Grinder
Specifications: Table 6” x 12” Volt
  • Chuck: 14"
    Kent Surface Grinder
    $2,250
    Kent Surface Grinder
    Specifications: Table 6” X 12” Equipped With: Counter Lamp
    Medina, Model-A End Grinder with 10" x 15" Magnet S/N 35
    $2,800
    Medina, Model-A End Grinder with 10" x 15" Magnet S/N 35
    SPECIFICATIONS: Permanent Magnetic Chuck 6" X 15" Condition:
    SETCO, Grand Air-Rester, Heavy Duty Pedestal Double End Grinder
    $2,250
    SETCO, Grand Air-Rester, Heavy Duty Pedestal Double End Grinder
    General Specifications Wheel diameter 12” HP 2 Volt
    • Grinding wheel diameter: 12"
      Baldor 6” Double End Grinder & 1” Belt Sander - On same Cabinet Bench
      $600
      Baldor 6” Double End Grinder & 1” Belt Sander - On same Cabinet Bench
      Baldor 6” Double End Grinder, Cat: 612, 14-96 General Specifications: Voltage 115 RPM 3600 Hz
      • Grinding wheel diameter: 6"
        Landis, Type 3R Universal Cylindrical Grinder
        $12,500
        Landis, Type 3R Universal Cylindrical Grinder
        SPECIFICATIONS: Nominal Work Swings: 14" Nominal Dist. between Work Centers: 96"
        • Swing: 14"
        • Centers: 96"
          One Used Blanchard 11-16, Rotary Surface Grinder, SN 11798,
          $18,500
          One Used Blanchard 11-16, Rotary Surface Grinder, SN 11798,
          General Specifications: Spindle Motor: 15 HP, 1160 rpm Dia. of Grinding Wheel: 11” Dia. of Rot
          • Chuck: 16"
            Deckel GK21 Pantograph, Engraver
            $5,750
            Deckel GK21 Pantograph, Engraver
            Specification: Working area: 360 x 200 mm (14.17” x 7.87 “) Copy table: 520 x 320 mm (20.47” x 12.60”)
            • Table width: 12.6"
            • Table length: 20.47"
              Walker-Turner Punch Drill Press, Model D1100
              $425
              Walker-Turner Punch Drill Press, Model D1100
              General Specifications: Table 21” x 17” w/ coolant trough Spindle taper
              Powermatic Drill Model 1200
              $1,800
              Powermatic Drill Model 1200
              General Specifications: Drill speed 300-1800 Condition: Good Price: F.O.B.Rochester “as-inspected” $ 1,800
              Johansson Radial Arm Drill
              $5,800
              Johansson Radial Arm Drill
              Specification: T- Slot Volt 440 HP
              American Hole Wizard, Radar Arm Drill
              $4,200
              American Hole Wizard, Radar Arm Drill
              General Specifications: 9” x 4 Ft Spindle speed 12 speeds (50 1500) Down feed 6 speeds (.007 - .018”) per revolution
              W. F. Wells & Sons, Model V-4012-F
              $5,800
              W. F. Wells & Sons, Model V-4012-F
              SPECIFICATIONS & EQUIPMENT: 40” throat 12” Work Height Feet per minute meter 4-speed transmission with variable speed giving
              • Throat capacity: 40"
              • Height capacity: 12"
                Marvel #8 Vertical Band Saw
                $3,800
                Marvel #8 Vertical Band Saw
                General Specifications: 18” x 18” capacity Tilt 45 degrees each way Coolant 1 HP Condition: Good Price: F.O.B. Rochester “as-inspected” $ 3,800.00 Terms:
                • Throat capacity: 18"
                • Height capacity: 18"
                  Jash 36" x 18" x 18" ANGLE PLATES
                  $5,500
                  Jash 36" x 18" x 18" ANGLE PLATES
                  NEW SET OF (2) 36" x 18" x 18" JASH CAST IRON T-SLOTTED ANGLE PLATES   SPECIFICATIONS: HEIGHT ........................ 36" DEPTH ......................... 18" WIDTH .................
                  Voltage Transformer/Regulator
                  $RFQ
                  Voltage Transformer/Regulator
                  Fully automatic servo motor-type A.C. voltage transformer and regulator, 3000 watts. It will convert your 220-240 volts 1 phase electricity to 110-120 volts to use the Milwaukee magnetic drill press in countries where 12
                  Milwaukee Magnetic Drill Press with 3/4 inch chuck
                  $RFQ
                  Milwaukee Magnetic Drill Press with 3/4 inch chuck
                  $1595. if purchased with a line boring setup. ($1695 separately • Approved by Milwaukee Tool Company engineers for use with the Q150 line boring Adapter Base. • Uses 120 volts electricity (see below for optional $21
                  Tools for Cutting I.D. Retaining Ring Grooves
                  $RFQ
                  Tools for Cutting I.D. Retaining Ring Grooves
                  this kit is custom made to order and comes with a spring, 2 set screw tool positioning collars and 2 extra long cobalt steel cutters ground to match the width of your inside retaining ring groove. A crude but low cost wa
                  Facing-Sanding Tool
                  $RFQ
                  Facing-Sanding Tool
                  Use to sand and face the damaged boss around a hole. Includes aluminum sanding disc that screws into our Q150 boring shaft and is designed to spin at 350 RPM. This kit also includes 6 adhesive coarse sanding discs for me
                  Honing Tool
                  $RFQ
                  Honing Tool
                  Attaches to your Mag Drill chuck or any other portable drill. 2 to 7 inch range. Comes with 220 Grit honing stones premounted for super smooth finishing work if you are a perfectionist. We also include a set of 100 Grit
                  Categories:
                  Condition:
                  Manufacturer:
                  Location:
                  Price:
                  •  to 
                  <Prev | 673 | 674 | 675 | 676 | 677 | 678 | 679 | 680 | 681 | 682 | Next>