buy & sell, new & used machinery, machine tools & equipment

Machine Tools

Machine Tools For Sale

14348 new & used machine tools items for sale
<Prev | 601 | 602 | 603 | 604 | 605 | 606 | 607 | 608 | 609 | 610 | Next>
Refine: Viewing 12161 - 12180 of 14348 matches
Sort by:
Items Per Page:  20  |  50 |  100
TONFOU TF3B-6A5 HYDRAULIC POWER CHUCK - 6" 3-JAW
$RFQ
TONFOU TF3B-6A5 HYDRAULIC POWER CHUCK - 6" 3-JAW
SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 1.77” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A5 APPROXIMATE WEIGHT: 30 LBS
TONFOU TF3B-6A5 HYDRAULIC POWER CHUCK - 6" 3-JAW
$RFQ
TONFOU TF3B-6A5 HYDRAULIC POWER CHUCK - 6" 3-JAW
SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 1.77” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A5 APPROXIMATE WEIGHT: 30 LBS
TONFOU TF3X-6A6 HYD POWER CHUCK - 6" 3-JAW
$RFQ
TONFOU TF3X-6A6 HYD POWER CHUCK - 6" 3-JAW
SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 2” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A6 APPROXIMATE WEIGHT: 30 LBS EQUIPPED WITH MOUNTING PLATE
1976 - SUNNEN MBB1800 HORIZONTAL HONE - .060" - 6.5"
$RFQ
1976 - SUNNEN MBB1800 HORIZONTAL HONE - .060" - 6.5"
SPECIFICATIONS I.D. RANGE: .060″ – 6.5″ LENGTH RANGE: BORES UP TO 16″ IN LENGTH, DEPENDING ON BORE DIAMETER STROKING RATES: 80, 110, 160, 220, 310 SPM SPINDLE SPEEDS: 200, 250, 320, 400, 500, 640, 800, 1000, 1270, 1600,
  • Maximum diameter: 6.5"
  • Stroke: 16"
    1990 - HARDINGE CHNCI GANG TOOL CNC LATHE - 1.625" 16C COLLET CAPACITY
    $RFQ
    1990 - HARDINGE CHNCI GANG TOOL CNC LATHE - 1.625" 16C COLLET CAPACITY
    SPECIFICATIONS SPINDLE SPINDLE CONFIGURATION: ANSI A2-5″ HOLE THROUGH SPINDLE: 1.875″ 16C COLLET CAPACITY: 1-5/8″ SPINDLE SPEED RANGE (1-RPM STEPS): 50 TO 5000 RPM AC SPINDLE DRIVE (30-MINUTE RATING): 10 HP CAPACITY MA
    • Swing: 14"
    • Centers: 12"
      DAKE 5025 H-FRAME HYD PRESS - 25 TON
      $RFQ
      DAKE 5025 H-FRAME HYD PRESS - 25 TON
      SPECIFICATIONS CAPACITY: 25 TONS HORSEPOWER: 2 HP RPM: 1,800 RPM RAM SPEED (ADVANCE): 80 IPM RAM SPEED (PRESS): 14 IPM WIDTH BETWEEN UPRIGHTS: 32-3/4″ WIDTH BETWEEN TABLE CHANNELS: 7 1/4″ MINIMUM RAM TO TABLE: 5″ MAXIMUM
      • Tonnage: 25T
        TECHNIKS RADAX HSK 63A HYD TOOLHOLDERS - (4) HSK63A
        $RFQ
        TECHNIKS RADAX HSK 63A HYD TOOLHOLDERS - (4) HSK63A
        LOT OF 4 TECHNIKS 93.05.037.012 HSK63A RADAX HYDRO 12mm X 90 mm TOOLHOLDERS NOTE: PRICE NEW $ 600.00 EACH THESE ARE NEW, NEVER USED. STILL IN ORIGINAL SEALED PLASTIC BAGS784
        AKEBONO MINC-26 GANG TOOL CNC LATHE - 1-1/16"
        $RFQ
        AKEBONO MINC-26 GANG TOOL CNC LATHE - 1-1/16"
        SPECIFICATIONS SIZE OF T-SLOTTED SLIDE: 16″ X 7-1/2″ TRAVEL (X) APPROX.: 9″ TRAVEL (Z) APPROX.: 9″ SPINDLE CAPACITY: 1-1/16″ MAXIMUM SPINDLE SPEED: 6,000 RPM ELECTRICS: 220V, 3 PH, 60 CYCLE EQUIPPED WITH FANUC OT CONTR
        • Swing: 9"
        • Centers: 9"
          HARIG 618 SURFACE GRINDER - 6" X 18"
          $RFQ
          HARIG 618 SURFACE GRINDER - 6" X 18"
          SPECIFICATIONS LONGITUDINAL TRAVEL: 18-3/4″ CROSSFEED TRAVEL: 6-3/4″ HYDRAULIC LONGITUDINAL TRAVEL: 0 – 70 FPM VERTICAL WORKING HEIGHT (UNDER 7″ WHEEL): 12″ PLATEN WORKING AREA: 6″ X 18″ GRINDING WHEEL, STANDARD: 7″ X 1/
          • Table width: 6"
          • Table length: 18"
            HARDINGE 6 POSITION BED TURRET - FOR DV-59
            $RFQ
            HARDINGE 6 POSITION BED TURRET - FOR DV-59
            SPECIFICATIONS 6 POSITION 5/8″ HOLE DIAMETER
            2000 - LOGANSPORT MDAT173DS-02 2-AXIS N/C ROTARY TILTING TABLE - 6.9"
            $RFQ
            2000 - LOGANSPORT MDAT173DS-02 2-AXIS N/C ROTARY TILTING TABLE - 6.9"
            SPECIFICATIONS TABLE DIAMETER: 6.9″ TABLE HEIGHT IN HORIZONTAL: 10.4″ OVERALL HEIGHT AT 90° TILTED: 13″ CENTER HEIGHT AT 90° TILTED: 8.3″ THRU HOLE DIAMETER: 0.7″ WIDTH OF GUIDE BLOCK: 0.7″ PERMISSIBLE LOAD: 66 LBS GEAR
            • Diameter or width: 6.9"
            • Length: 6.9"
              1990 - CLAUSING 1639 MULTI SPINDLE DRILL - 15" 3 SPINDLE
              $RFQ
              1990 - CLAUSING 1639 MULTI SPINDLE DRILL - 15" 3 SPINDLE
              SPECIFICATIONS THROAT DEPTH: 7-1/2″ DRILLING CAPACITY CAST IRON: 5/8″ MILD STEEL: 1/2″ SPINDLE TAPER: #2 MT SPINDLE TRAVEL: 4-3/4″ SPINDLE SPEEDS (5) W/STEP PULLEY DRIVE: 260 – 1800 RPM ELECTRICS: 440 VOLTS, 3PH, 60 CYC
              • # Spindles: #3
                IBP BROWN CUT-OFF SAW - 12"
                $RFQ
                IBP BROWN CUT-OFF SAW - 12"
                SPECIFICATIONS MOTOR: 2.5/3 HP SPINDLE: 30/60 RPM MAXIMUM BLADE DIAMETER: 12″ MAXIMUM VISE OPENING: 5-1/2″ EQUIPPED WITH MANUAL DOWNFEED AIR VISE SWIVEL HEAD ARRANGED FOR COOLANT, BUT MISSING PUMP & TANK
                • Blade diameter: 12"
                  USED SOLBERGA SE1735 GH SINGLE SPINDLE DRILL - 24"
                  $RFQ
                  USED SOLBERGA SE1735 GH SINGLE SPINDLE DRILL - 24"
                  SPECIFICATIONS DRILLS TO CENTER OF CIRCLE: 24″ DRILLING CAPACITY IN CAST IRON: 1-1/2″ DRILLING CAPACITY IN MILD STEEL: 1″ SPINDLE TRAVEL: 6″ SPINDLE TAPER: NO. 3 MT LOW SPINDLE SPEEDS: 60, 160, 260, 715 RPM HIGH SPINDLE
                  • Swing: 24"
                  • Motor: 2.2HP
                    NEW - KALAMAZOO S612-3 COMBINATION SANDER - 6"BELT/12"DISC
                    $RFQ
                    NEW - KALAMAZOO S612-3 COMBINATION SANDER - 6"BELT/12"DISC
                    SPECIFICATIONS BELT MACHINE WORK TABLE – CAST IRON: 6″ X 10″ WITH 1/2″ X 1/8″ SLOT PLATEN – STEEL: 6-1/2″ X 14″ BELT: 6″ X 48″, 2800 SFPM DISC MACHINE WORK TABLE- CAST IRON: 8″ X 14″ DISC – ALUMINUM: 12″, 5/8″ ARBOR, 25
                    • Width: 6"
                      UTE EF-104 RAM END FORMING SYSTEM - 1"
                      $RFQ
                      UTE EF-104 RAM END FORMING SYSTEM - 1"
                      APPLICABLE ENDFORM EXAMPLES SINGLE / DOUBLE FLARES CAPTURED / BUBBLE / STRAIGHT BEADS BELLED ENDS INCLUDING 3-STEP BELLS SADDLES REDUCTIONS EXPANSIONS SPECIFICATIONS CAPACITY (IN. X WALL IN.) STEEL: 1.00″ X .095″ STAINL
                      1988 - DENISON MULTIPRESS MODEL WUPA-1TR HYDRAULIC C-FRAME PRESS, 1 TON
                      $RFQ
                      1988 - DENISON MULTIPRESS MODEL WUPA-1TR HYDRAULIC C-FRAME PRESS, 1 TON
                      SPECIFICATIONS CAPACITY: 1 TON STROKE: 3″ DAYLIGHT: 8-1/4″ THROAT: 4-1/2″ ELECTRIC MOTOR: 3/4 HP RESERVOIR CAPACITY: 12 QUART BASE PLATE AREA: 9″ X 10″ GENERAL ELECTRICS: 110 VOLTS, 1 PH, 60 CYC EQUIPPED WITH PALM BUTT
                      • Tonnage: 1T
                      • Stroke: 3"
                        (2) MID-STATE TOMBSTONE FIXTURES - 5.75" X 25.25"
                        $RFQ
                        (2) MID-STATE TOMBSTONE FIXTURES - 5.75" X 25.25"
                        SPECIFICATIONS CLAMPING SURFACE (4-SIDES): 5.75″ X 25.25″ MOUNTED ON 19-11/16″ PALLET
                        TONFOU TF3X-6A6 HYD POWER CHUCK - 6" 3-JAW
                        $RFQ
                        TONFOU TF3X-6A6 HYD POWER CHUCK - 6" 3-JAW
                        SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 2” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A6 APPROXIMATE WEIGHT: 30 LBS EQUIPPED WITH MOUNTING PLATE
                        TONFOU TF3X-6A6 HYD POWER CHUCK - 6" 3-JAW
                        $RFQ
                        TONFOU TF3X-6A6 HYD POWER CHUCK - 6" 3-JAW
                        SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 2” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A6 APPROXIMATE WEIGHT: 30 LBS EQUIPPED WITH MOUNTING PLATE
                        Categories:
                        Condition:
                        Manufacturer:
                        Location:
                        Price:
                        •  to 
                        <Prev | 601 | 602 | 603 | 604 | 605 | 606 | 607 | 608 | 609 | 610 | Next>