Machine Tools for sale, New & Used | MachineSales.com

20" X 54" MONARCH MODEL 610 SERIES 2013X54 HEAVY DUTY ENGINE LATH

$RFQ

20" X 54" MONARCH MODEL 610 SERIES 2013X54 HEAVY DUTY ENGINE LATHE MANUFACTURED 1964 RACO Stock Number R017873 SWING -------------------------------------------- 20" SWING OVER CROSS SLIDE ---------

Swing: 20"
Centers: 54"

Des Plaines, IL
View Listing

4" NOMURA B-100LP TABLE TYPE HORIZONTAL BORING MILL

$RFQ

4" NOMURA B-100LP TABLE TYPE HORIZONTAL BORING MILL MANUFACTURED 1980 RACO Stock Number R017890 SPINDLE SIZE -------------------------------- 4" DIA. SPINDLE TAPER ------------------------------ #50 MIL

Spindle diameter: 4"

Des Plaines, IL
View Listing

24" PRATT & WHITNEY POWER & HAND ROTARY TABLE

$RFQ

EQUIPPED WITH: 3/4" T-Slots 6 T-Slots

Warren, MI
View Listing

24" KEARNEY & TRECKER POWER & HAND ROTARY TABLE

$RFQ

EQUIPPED WITH: 3/4" T-Slots 3 T-Slots SPECIFICATIONS: Table: 20"

Warren, MI
View Listing

NO. GCI, NATIONAL BROACH, 8"CAP

$RFQ

EQUIPPED WITH: HEAD STOCK AND TAIL STOCK COOLANT SYSTEM AND WATER GUARD. CROWNING ATTACHMENT. LARGE SELECTIOM OF SPEED AND FEED GEARS. 9" CUTTER HEAD 220-440VOLT -3 PHASE -60 CYCLE A.C, MOTOR WITH 110 VOLT C

Warren, MI
View Listing

MODEL NO. FS180, FELLOWS CNC GEAR SHAPER, W/FANUC 15M CONTROL

$RFQ

EQUIPPED WITH: Fanuc 15M Control Hydrostatic Guide Manual Pulse Generator Cutter Spindle Backoff Programmable Multi-Surface Cutting Capability Lubrication System Inch/Meter Coolant System w/Chip Conveyor Progr

Warren, MI
View Listing

MODEL 10-2 FELLOWS GEAR SHAPER

$RFQ

EQUIPPED WITH: Fanuc Control Elevating Attachment on Work Spindle Spur Guide 3" Riser LR Mate 100 Robot With Independent Control Vari-Speed Motor Drive Work Light 7.5/1.75 HP Motor SPECIFICATIONS:

Warren, MI
View Listing

FELLOWS MODEL 8AGS GEAR SHAPER

$RFQ

EQUIPPED WITH: 2" Riser Spur Guide 2 Speed Stroke Selection Lube System Hydraulics Rapid Approach Operating Extension for Internals Operating Manual Operating Light Motor and Controls Coolant System

Warren, MI
View Listing

MODEL 608 GLEASON SPIRAL BEVEL GEAR GENERATOR/ROUGHER

$RFQ

EQUIPPED WITH: Index Plate Geneva Cam Cutter Body Hydraulic Work Clamping Coolant Pump & Tank Chip Conveyor Additional Cutter Bodies, Index Plates & Geneva Cams Available SPECIFICATIONS: Min. Outside Cone

Warren, MI
View Listing

Pacific Straight Side Hydraulic Press 200 Ton (1992)

$RFQ

Pacific Straight Side Hydraulic Press 200 Ton (1992)

Tonnage: 200T
Tonnage: 200T
Stroke: 200"

Orion Township, MI
View Listing

Pacific Straight Side Hydraulic Press 200 Ton (1995)

$RFQ

Pacific Straight Side Hydraulic Press 200 Ton (1995)

Tonnage: 200T
Tonnage: 200T
Stroke: 18"

Orion Township, MI
View Listing

1999 DAEWOO DMV-500 VMC, MITSUBISHI MELDAS 64 CONTROL, 40.2" X 19.7&qu

$RFQ

SPECIFICATIONS TABLE SIZE: 47.2" X 19.7" X-AXIS TRAVEL: 40.2" Y-AXIS TRAVEL: 19.7" Z-AXIS TRAVEL: 20.1” SPINDLE TAPER: 40 SPINDLE DRIVE MOTOR (30 MIN/CONT.): 20/15 HP MAXIMUM SPINDLE SPEED: 8

X axis: 40.2"
Y axis: 19.7"

Bethlehem, PA
View Listing

1997 DAEWOO ACE 50 VMC, MITSUBISHI MELDAS 64 CONTROL, 40” X 20” X 20”

$RFQ

SPECIFICATIONS TABLE SIZE: 47.2" X 19.7" MAXIMUM TABLE LOAD: 1,760 LBS SPINDLE NOSE TO TABLE TOP: 5.9” – 26” (EVENLY DISTRIBUTED) X-AXIS TRAVEL: 40” Y-AXIS TRAVEL: 20” Z-AXIS TRAVEL: 20” RAPID TRAVERS

X axis: 40"
Y axis: 20"

Bethlehem, PA
View Listing

Hoesch 2000 Ton Press #2

$RFQ

SPECIFICATIONS: Closing speed (rapid traverse) max 1,200" min Compression velocity 1.2 -35" min Tool Opening velocity (by the parallelism cylinder) adjustable up to 1.2 - 35"/min Max. retracti

Tonnage: 2000T

Orion Township, MI
View Listing

Denison 8 Ton Hydraulic Press , 18" Stroke, 34" DLO

$RFQ

SPECIFICATIONS: 18"STROKE 34"DAYLIGHT OPEN 10-1/4"THROAT DEPTH 18"FB X 22"RL BED AREA 3.5"DIAMETER PISTON SPEEDS: 470 IPM CLOSE 190 IPM PRESS 435 IPM RETURN 230/460/3/60 MOTOR AND CONTROLS APPROXIMATE DIMENSIO

Tonnage: 8T
Stroke: 18"

Orion Township, MI
View Listing

Hannifin 25 Ton Hydraulic Press

$RFQ

SPECIFICATIONS: 4" STROKE 29" DAYLIGHT 5 ½" CYLINDER DIAMETER 46" X 10" BED SIZE 9" THROAT 12" X 10" RAM PALM BUTTONS 10 HP MOTOR, 230/460/60/3 GOOD CONDITION CAN BE USED AS A STRAIGHTENING PRESS

Tonnage: 25T
Stroke: 4"

Orion Township, MI
View Listing

Greenerd 30 Ton Hydraulic Press, Model #H30-14

$RFQ

SPECIFICATIONS: 12" STROKE 24" DAYLIGHT 25" x 16" BED SIZE YEAR: 1974 118 GALLON HYDRAULIC RESEVOIR CAPACITY

Tonnage: 30T

Orion Township, MI
View Listing

SCHULER 16 TON HYDRAULIC PRESS MODEL #OGF 16

$RFQ

SPECIFICATIONS: 16 TON CAPACITY 25" STROKE 29.5" DAYLIGHT 26" X 24" BED AREA 18" THROAT PUSH BUTTON CONTROL MAXIMUM PRESSURE 1630 PSI 40 GALLON RESERVOIR TANK 10HP MOTOR, 460/60/3, 1200 RPM

Tonnage: 16T

Orion Township, MI
View Listing

50 Ton PH 4 Post Hydraulic Press

$RFQ

SPECIFICATIONS: STROKE 40" DAYLIGHT OPENING 64" TO BED BED AND PLATEN 42" x 120" AREA BETWEEN POSTS 28" x 100" POST DIAMETER 4" 2 MAIN CYLINDERS 4" DIAMETER EACH DOWN ACTING 30 HP MOTOR & HYDRAULIC PUMP, TOP MOUN

Tonnage: 50T

Orion Township, MI
View Listing

KR Wilson DC-SA 4 Post Hydraulic Press

$RFQ

SPECIFICATIONS: Tonnage 2,000 lbs Ram Stroke 36" Open Daylight 48" Closed Daylight 22" Bed Size (L-R, F-B) 120" x 48" Distance Between Post (L-R, F-B) 54" x 48" Ram Speeds 60 IPM Approach 1 IPM Forming 52 IPM Re

Orion Township, MI
View Listing

buy & sell, new & used machinery, machine tools & equipment

Machine Tools For Sale

buy & sell, new & used machinery, machine tools & equipment

Machines currently for sale:

Machine Tools For Sale