Machine Tools for sale, New & Used | MachineSales.com

BAILEIGH VMD-18 1.5" Drill Capacity Mill Drill w/R-8 Taper

$RFQ

CALL 386-304-3720 FOR AVAILABILITY FEATURES: The Baileigh VMD-18 Mill Drill is the perfect option when operators need to do some light-duty milling that doesn't require a full-size milling machine but still a

Port Orange, FL
View Listing

2003 SODICK AQ325L CNC WIRE EDM

$28,500

LINEAR WAYS, AUTOTHREADING, SUBMERGED, LQ1W CNC CONTROL

X axis travel: 13.7"
Y axis travel: 9.8"

Thousand Oaks, CA
View Listing

2008 Haas SL30T with Live Milling

$RFQ

2008 Haas SL30T with Live Milling Bar Capacity: 3" Chuck Size: 10" Spindle Speed: 3,400 RPM Spindle Motor: 30 HP X Axis Travel: 9.4" Z Axis Travel: 32.5" Rapid Rate Z Axis: 945 IPM Turret To

Livonia, MI
View Listing

1999 - 22 Ton Strippit 1250H/20 CNC Turret Punch

$RFQ

Capacity 22 Tons Travels 39" x 50" Max Sheet Size 120" x 50" Max Hole Diameter 3.5 Weight 25,000 lbs Equipped with: Fanuc OP Control 20 Stations w/ 3 A/I 2 Work Clamps Brush Table

Tonnage: 22T

SANTA ANA, CA
View Listing

BURN OFF OVEN, POLLUTION CONTROL 36"W 21"L 33"H

$RFQ

SINGLE SIDE SWING DOOR WITH POSITIVE LATCHING AND PRESSURE RELIEF ROOF PANEL. INSIDE WALLS, ROOF AND DOOR ARE LINED WITH LIGHT WEIGHT REFRACTORY. FLOOR IS A POURED CASTABLE REFRACTORY. TWO PACKAGE BURNERS (300,000 BTU/HR

Tolland, CT
View Listing

BURN OFF OVEN, TOP LOAD, POLLUTION CONTROL, 3'W 3'L 3'H

$RFQ

TOP LOAD DESIGN WITH HAND OPERATED COVER. LIGHT WEIGHT REFRACTORY LINING ON WALLS AND DOOR. FLOOR IS A POURED CASTABLE REFRACTORY. HEAT FOR MAIN HEAT AND AFTERBURNER ARE SUPPLIED BY PACKAGE BURNERS (

Tolland, CT
View Listing

INERT ATMOSPHERE OVEN, DESPATCH 25"W 25"L 25"H, 1000 F

$RFQ

INERT ATMOSPHERE OVEN HAS SINGLE SIDE SWING DOOR WITH POSITIVE LATCHING. HEATING AIR IS CIRCULATED HORIZONTALLY. INTERIOR HAS PROVISIONS FOR (8) SHELVES, (4) SHELVES ARE INCLUDED. ORIGINALLY DESIGNED FOR STRESS RELIEVIN

Chamber width: 25"
Chamber length: 25"

Tolland, CT
View Listing

ROLLER CONVEYOR OVEN, FB SERIES, 4'W 8'L 56"H, 500 F GAS

$RFQ

DOUBLE DOOR OPENING WITH PRESSURE TYPE LATCHES AT BOTH FRONT AND REAR. INTERIOR HAS A GRAVITY ROLLER CONVEYOR. HEAT IS SUPPLIED BY A GAS BURNER FIRING INTO A PROTECTED CHAMBER ABOVE WORK AREA AND CIRCULATED BY (2) ROOF M

Chamber width: 48"
Chamber length: 96"

Tolland, CT
View Listing

VACUUM FURNACE, SURFACE COMBUSTION 36"W 48"L 24"H, 1350 F

$RFQ

HORIZONTAL DOUBLE WALLED WATER COOLED CHAMBER WITH SINGLE SIDE SWING BOLT DOWN FRONT DOOR. WHEN PROCESS BEGINS VACUUM PUMPS EVACUATE THE VESSEL. WHEN COMPLETE VESSEL IS BACK FILLED WITH NITROGEN. HEAT IS

Chamber width: 36"
Chamber length: 48"

Tolland, CT
View Listing

CAR BOTTOM FURNACE, BEAVERMATIC, 1500 F GAS 7'W 10'L 7'H

$RFQ

HEAT (4,100,000 BTU/HR MAX TOTAL 5-7 PSI) IS SUPPLIED BY (9) NOZZLE MIX BURNERS WITH SPARK IGNITION AND FLAME SAFETY FIRING FROM ABOVE AND BELOW WORK AREA.. INTERIOR IS LINED WITH LIGHT WEIGHT REFRACTORY. CAR IS ELECTR

Chamber width: 84"
Chamber length: 120"

Tolland, CT
View Listing

VACUUM FURNACE, SECO WARWICK BOTTOM LOAD 48"DIA 48"H 2200 F

$RFQ

BOTTOM LOAD VERTICAL VACUUM FURNACE WITH METALLIC HOT ZONE AND HEATING ELEMENTS HAVING CAPACITY OF: 1000 LBS @ 1000C. HEATING ELEMENTS ARE MOUNTED IN FLOOR BELOW HEARTH,ON ROOF & SIDE WALL. POWER TO HEATING ELEM

Chamber width: 48"
Chamber length: 48"

Tolland, CT
View Listing

USED PIRANHA 140 TON HYDRAULIC SINGLE END PUNCH MODEL SEPP-140, Stock# 11037, Year: 1996

$RFQ

Brand: PiranhaModel: SEPP-140Specifications: Tonnage: 140 tonsThroat depth: 20.5"Platen size: 36" x 16"Open height: 14"Closed height: 7-3/4"Stroke length: 7"Strokes per minute: 24 @ 1"Main motor: 20 H.P.Voltage:

Warren, MI
View Listing

USED PIRANHA 120 TON HYDRAULIC IRONWORKER MODEL P-120, Stock# 11036, Year: 2004

$RFQ

Brand: PiranhaModel: P-120Specifications: Tonnage: 120 tonsThroat depth: 12"Round bar: 1/2" - 2"Square bar: 1/2" - 1-3/8" (blades not included) Plate shear: 20" x 1/2", 18" x 3/4", 12" x 1"Angle shear: 6" x 6" x

Warren, MI
View Listing

ShopSabre sidekick 10

$20,000

pretty much brand new shop sabre only ran about 4 sheets on the moving shops and need to down size. see listing for more details https://www.facebook.com/marketplace/item/275329715073839/

louisville, TN
View Listing

H Lioho LH-1 1/2 Arlington Milling Machine

$4,800

Type: Vertical Table: 9" x 42" Spindle: R8 Automatic feed: X Axis HP: 1.5 Dimensions: 56" x 58" x 82"

Vinton, TX
View Listing

Oster 716

$8,900

Swing over bed: 20" Spindle bore: 7-1/2" Between centers: 18" HP: 5 Voltage / Phase: 440 / 3 Weight: 3,550 lbs Dimensions: 28"x 79" x 57" Capacity: Tube: 1" to 6", Screw: 1&

Vinton, TX
View Listing

Pines Engineering Co. 11015-64033 Tube Bender

$6,500