buy & sell, new & used machinery, machine tools & equipment

Machine Tools

Machine Tools For Sale

15501 new & used machine tools items for sale
<Prev | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | Next>
Refine: Viewing 1501 - 1550 of 15501 matches
Sort by:
Items Per Page:  20 |  50  |  100
POREBA TCG-160-10M Lathe
$109,000
POREBA TCG-160-10M Lathe
Swing over bed: 90" Between centers: 32' Spindle bore: 4" Threads: Std Tailstock spindle taper: Yes Chuck: 5' Dimensions: 94" x 600" x 102"
  • Swing: 90"
    POLLUTION CONTROL BURN OFF OVEN 72"W 74"L 75"H
    $RFQ
    POLLUTION CONTROL BURN OFF OVEN 72"W 74"L 75"H
    DOUBLE DOOR OPENING WITH PRESSURE RELIEF ROOF PANEL. PRIMARY HEAT AND AFTER BURNER HEAT ARE SUPPLIED BY PACKAGE BURNERS FIRING INTO HEAT TUBES IN REAR OF WORK CHAMBER. INTERIOR WALLS, ROOF AND DOORS ARE LINED WITH LIGHT
    WISCONSIN 1050 F ELECTRIC OVEN 8'W 8'L 5'H
    $RFQ
    WISCONSIN 1050 F ELECTRIC OVEN 8'W 8'L 5'H
    AIR OPERATED VERTICAL LIFT FRONT DOOR. CIRCULATING FAN (15 HP, 15,000 CFM) AND HEATING ELEMENTS ARE MOUNTED IN A PROTECTED CHAMBER ABOVE WORK AREA. HEATED AIR ENTERS WORK AREA VIA DUCT WORK ON SIDE AND REAR WALLS RETU
    • Chamber width: 96"
    • Chamber length: 96"
      ACE BURN OFF OVEN 36"W 36"L 47"H
      $RFQ
      ACE BURN OFF OVEN 36"W 36"L 47"H
      ARE LINED WITH LIGHT WEIGHT REFRACTORY COVERED BY EXPANDED METAL. FLOOR IS A POURED CASTABLE REFRACTORY. HEAT FOR PRIMARY HEAT AND AFTERBURNER HEAT IS SUPPLIED BY (2) PACKAGE BURNERS FIRING FROM THE RIGHT SIDE INTO THE
      GLOBAL FINISHING UNUSED 500 F WALK IN OVEN 10'W 22'L 9'H
      $RFQ
      GLOBAL FINISHING UNUSED 500 F WALK IN OVEN 10'W 22'L 9'H
      UNUSED CLASS A OVEN MANUFACTURED IN 2021, NEVER INSTALLED. DOUBLE DOOR OPENING WITH PRESSURE TYPE LATCHES AT BOTH FRONT AND REAR. REMOVABLE ROOF MOUNTED COMBUSTION CHAMBER WITH GAS BURNER (2,000,000 BTU/HR MAX) AND 10
      • Chamber width: 120"
      • Chamber length: 264"
        HURRICANE SYSTEMS (MIDBROOK) 24"W BELT WASHER
        $RFQ
        HURRICANE SYSTEMS (MIDBROOK) 24"W BELT WASHER
        ALL STAINLESS STEEL CONSTRUCTION WITH 24"WIDE VARIABLE SPEED FLAT WIRE BELT. PARTS ARE LOADED ON BELT IN THE OPEN LOAD AREA TRAVEL THROUGH APPROX 3' WASH, 2' TRANSITION ZONE, 2' RINSE, 2' TRANSITION
        DESPATCH 500 F GAS WALK IN OVEN 6'W 10' 6.5'H
        $RFQ
        DESPATCH 500 F GAS WALK IN OVEN 6'W 10' 6.5'H
        DOUBLE DOOR OPENING WITH VIEWING WINDOW AT BOTH FRONT AND REAR. HEAT (500,000 BTU) IS SUPPLIED BY A PACKAGE BURNER FIRING INTO A REMOVABLE ROOF MOUNTED CHAMBER. HEATED AIR, WHICH IS CIRCULATED BY A BELT DRIVEN FAN, ENTER
        • Chamber width: 72"
        • Chamber length: 120"
          DESPATCH 1000 F ELEC. OVEN 47"W 30"L 42"H
          $RFQ
          DESPATCH 1000 F ELEC. OVEN 47"W 30"L 42"H
          DOUBLE DOOR OPENING WITH POSITIVE LATCHING AND STAINLESS STEEL INTERIOR. HEATING ELEMENTS AND CIRCULATING FAN ARE MOUNTED BELOW WORK AREA IN A PROTECTED CHAMBER. HEATED AIR IS CIRCULATED HORIZONTALLY. (14) SHELVES ARE
          • Chamber width: 47"
          • Chamber length: 30"
            2007 Daewoo Lynx 200 2-Axis CNC Lathe
            $RFQ
            2007 Daewoo Lynx 200 2-Axis CNC Lathe
            2007 Daewoo Lynx 200 2-Axis CNC Lathe SPECIFICATIONS: SWING 18.11" CHUCK SIZE 8" BAR CAPACITY 1.5" POWER 10 hp MAX RPM 5,000 RPM TURNING DIA 11.02" TAILSTOCK
            CHIRON FZ-12W HIGH SPEED CNC VERTICAL MACHINING CENTER 1998
            $RFQ
            CHIRON FZ-12W HIGH SPEED CNC VERTICAL MACHINING CENTER 1998
            CHIRON FZ-12W HIGH SPEED CNC VERTICAL MACHINING CENTER 1998 2 Machines Available…. S/N 469-94 GE Fanuc 21M Control Specifications Axis X 550 mm Axis Y 300 mm Axis Z 425 mm Rotary table (4th axis) n
            HIGH SPEED CELL LINES FOR D SIZE (R20) & AA SIZE (R6) BATTERIES (14379)
            $RFQ
            HIGH SPEED CELL LINES FOR D SIZE (R20) & AA SIZE (R6) BATTERIES (14379)
            HIGH SPEED CELL LINESStock # 14379High Speed Cell Lines &ndash; overviewThe High Speed Celll Lines (HSCL) consist of two production lines. These production lines were designed to manufacture Zinc Chloride cellsin the
            2000mm x 3.2mm x 60,000# Bronx High Speed Cut-To-Length Line (14371)
            $RFQ
            2000mm x 3.2mm x 60,000# Bronx High Speed Cut-To-Length Line (14371)
            Max Weight 60000 pounds Max Coil Width Capacity
            10,000# x 32" Stamco Recoiler (14374)
            $RFQ
            10,000# x 32" Stamco Recoiler (14374)
            Max Weight of Coil 10000 pounds Stamco RecoilerStock # 14374-Capacity: 10,000# x 32"-Ma
            20,000 lbs X 32" STAMCO RECOILER (14375)
            $RFQ
            20,000 lbs X 32" STAMCO RECOILER (14375)
            Max Weight of Coil 20000 pounds Stamco RecoilerStock # 14375&nbsp; 20,000# Capacity
            30” x .060” x 20,000# Herr Voss / Red Bud High Speed Blanking Line (14370)
            $RFQ
            30” x .060” x 20,000# Herr Voss / Red Bud High Speed Blanking Line (14370)
            Max Weight 20000 pounds Max Coil Width Capacity
            4,000 Lb DURANT Model MD-403-MVS Motorized Uncoiler (14378)
            $RFQ
            4,000 Lb DURANT Model MD-403-MVS Motorized Uncoiler (14378)
            Max Weight of Coil 4000 pounds Max Width of Coil
            36" BLANCHARD MODEL #20K ROTARY SURFACE GRINDER: STOCK # 14377
            $RFQ
            36" BLANCHARD MODEL #20K ROTARY SURFACE GRINDER: STOCK # 14377
            36" BLANCHARD MODEL #20K ROTARY SURFACE GRINDERSTOCK # 14377SERIAL ....111019MODEL ........ 20KNEW IN ................................. 1976DIAMETER OF MAGNETIC CHUCK ............. 36"MAXIMUM SWING INSIDE WATER GUARDS ..
            JET VBS-2012VS-DC 20 in. Continuous Variable Speed Vertical Bandsaw
            $RFQ
            JET VBS-2012VS-DC 20 in. Continuous Variable Speed Vertical Bandsaw
            CALL 386-304-3720 FOR AVAILABILITY *EFFORTLESS OPERATION These Bandsaws feature seamless speed adjustments, a precision laser guide for accurate cutting, and an efficient chip blower to keep the blade area clean.
            • Throat capacity: 20"
              JET VBS-1813VS-DC 18 in. Continuous Variable Speed Vertical Bandsaw
              $RFQ
              JET VBS-1813VS-DC 18 in. Continuous Variable Speed Vertical Bandsaw
              CALL 386-304-3720 FOR AVAILABILITY *EFFORTLESS OPERATION These Bandsaws feature seamless speed adjustments, a precision laser guide for accurate cutting, and an efficient chip blower to keep the blade area clean.
              • Throat capacity: 18"
                JET VBS-1207VS-DC 12 in. Continuous Variable Speed Vertical Bandsaw
                $RFQ
                JET VBS-1207VS-DC 12 in. Continuous Variable Speed Vertical Bandsaw
                CALL 386-304-3720 FOR AVAILABILITY *EFFORTLESS OPERATION These Bandsaws feature seamless speed adjustments, a precision laser guide for accurate cutting, and an efficient chip blower to keep the blade area clean.
                • Throat capacity: 12"
                  10" x 18" Ger RHC-450 Universal Cylindrical Grinder, 14" Whe
                  $RFQ
                  10" x 18" Ger RHC-450 Universal Cylindrical Grinder, 14" Whe
                  10" X 18" GER RHC-450 UNIVERSAL CYLINDRICAL GRINDER Model RHC-450, New 1984 Stock # Q11961 EQUIPPED WITH: Dropdown ID Spindle Attachment, Tailstock, Coolant Tank & Pump. SPECIFICATIONS: Max Swing
                  • Swing: 10"
                  • Centers: 17.717"
                    Cincinnati Monoset 8 Axis MT2 Tool & Cutter Grinder with .00005 - 4 Axi
                    $RFQ
                    Cincinnati Monoset 8 Axis MT2 Tool & Cutter Grinder with .00005 - 4 Axi
                    Cincinnati Monoset 8 Axis MT 2 Tool & Cutter Grinder with Tooling Shown and "SONY" .00005 4 Axis Digital Readout *Very Special Machine* Free Skidding, Crating and Shipping with Insurance Until 5/27/20
                    2001 LVD 240-4
                    $RFQ
                    2001 LVD 240-4
                    Strippit LVD model 24014 240 ton 4-meter brake with X, R, Z, axis back gauge, motorized crowning, Willa style hydraulic upper clamping, and robust LVD PC color graphics control for fast set up and accurate bending. Mo
                    2014 LVD Electra 3015
                    $RFQ
                    2014 LVD Electra 3015
                    Model :LVD Electra 3015 Laser Power:4KW Laser Type:Flying Optic Max Sheet Size:120" x 60" Shuttle Table:Yes Z-Axis:7.8" X-Axis:61" Y-Axis:122" Combined Max Speed: 4454 IPM Control: LVD P
                    • Wattage: 4000W
                    • X axis travel: 5'
                      LVD Electra 3015
                      $RFQ
                      LVD Electra 3015
                      Model :LVD Electra 3015 Laser Power:4KW Laser Type:Flying Optic Max Sheet Size:120" x 60" Shuttle Table:Yes Z-Axis:7.8" X-Axis:61" Y-Axis:122" Combined Max Speed: 4454 IPM Control: LVD P
                      • Wattage: 4000W
                      • X axis travel: 5'
                        2011 - Mitsubishi FA10S Advance CNC Wire EDM
                        $RFQ
                        2011 - Mitsubishi FA10S Advance CNC Wire EDM
                        Max. Workpiece Size 41.34" x 31.50" x 11.61" X Axis Travel 13.7" Y Axis Travel 9.8" Z-Axis Travel 8.6" U/V Travels +/- 1.25" Max. Workpiece Weight 3300 lbs. Equipped with: 64 B
                        • X axis travel: 13.7"
                        • Y axis travel: 9.8"
                          Hwacheon Cutex-240B SMC CNC Turning and Milling Center with Sub Spindle
                          $RFQ
                          Hwacheon Cutex-240B SMC CNC Turning and Milling Center with Sub Spindle
                          SPECIFICATIONS: Swing Over Bed 22.8”/580mm Maximum Turning Diameter 15”/380mm Standard Turning Diameter 8.3”/210mm Maximum Turning Length 22.2”/565mm Main Spindle Chuck Diameter 8” Sub Spindle Chuck Diameter 6” Ma
                          8" x 8" x 1" Herkules #BO234K1; Control stand; Tooling
                          $RFQ
                          8" x 8" x 1" Herkules #BO234K1; Control stand; Tooling
                          . We are pleased to offer for your consideration: (1) 8" x 8" x 1" Herkules Wetzlar Horizontal Angle Bending Roll Stock Number: 13954 List Price: On Request Manufacturer: Herkules Wetzlar Model
                          • Length: 8"
                          • Width: 8"
                            Daewoo Puma 12L CNC Turning Center 1990
                            $RFQ
                            Daewoo Puma 12L CNC Turning Center 1990
                            Daewoo Puma 12L CNC Turning Center 1990 S/N 380407 Equipped With: Fanuc 15TF CNC Control 12″ Chuck A2-8 Spindle 12 Station Bi-directional Turret Tailstock Coolant System Foot Switch Coolant Tank and Chip
                            2013 Enshu GE480H CNC HMC, Fanuc 31iM-B, full 4th axis, CT40, 15k RPM, 60 A
                            $RFQ
                            2013 Enshu GE480H CNC HMC, Fanuc 31iM-B, full 4th axis, CT40, 15k RPM, 60 A
                            2013 Enshu GE480H CNC HMC, Fanuc 31iM-B, full 4th axis, CT40, 15k RPM, 60 ATC https://youtu.be/nS1rMCLoxvg Enshu Model GE480H Horizontal Machining Center Control:......................................Fanuc 31i MB
                            Bridgeport Vertical Milling Machine
                            $3,895
                            Bridgeport Vertical Milling Machine
                            Bridgeport Vertical Milling Machine includes: > 9x42in Table > Digital Readout (DRO). High precision DRO included for accurate measurements and ease of use. > X-axis Power Drive for smooth and consistent fee
                            Cincinnati Monoset 8 Axis MT2 Tool & Cutter Grinder with .00005 - 4 Axi
                            $RFQ
                            Cincinnati Monoset 8 Axis MT2 Tool & Cutter Grinder with .00005 - 4 Axi
                            Cincinnati Monoset 8 Axis MT 2 Tool & Cutter Grinder with Tooling Shown and "SONY" .00005 4 Axis Digital Readout 8 Axis = 5 Linear Axes, 2 Rotary Axes and 1 Radial Axis *Very Special Machine* **FREE Sk
                            Haas SL-30T CNC Lathe, 12" 3-Jaw Chuck, 30" Swing. 39" Cente
                            $RFQ
                            Haas SL-30T CNC Lathe, 12" 3-Jaw Chuck, 30" Swing. 39" Cente
                            HAAS SL-30T CNC TURNING CENTER Model SL-30T, S/N 71207, New 2005 Stock # Q11947 EQUIPPED WITH: Haas CNC Control, 12" 3-Jaw Kitagawa Chuck, Tool Presetter, 3.5" Spindle Bore, 12 Station Tool Turret (1 Bori
                            • Swing: 30"
                            • Centers: 39"
                              Enco Metal Cutting Band Saw 7in x 12in Model 137-3175
                              $825
                              Enco Metal Cutting Band Saw 7in x 12in Model 137-3175
                              Capacity 7in Round; 7in x 12in Rectangular Blade 3/4in x 0.032in x 93in Variable speed Miter Angle Range: 45deg Flood Coolant system Casters Heavy duty steel base, cast iron saw head and table Adjustable Blade Gui
                              • Width capacity: 12"
                              • Height capacity: 7"
                                Toshiba Machine BTH-110.R18 4.3" CNC Table Type Boring Mill
                                $RFQ
                                Toshiba Machine BTH-110.R18 4.3" CNC Table Type Boring Mill
                                Reference #43587 Toshiba Machine BTH-110.R18 4.3" CNC Table Type Boring Mill FEATURES: Tosnuc 999 CNC Control 32 Position Automatic Tool Changer SPECIFICATIONS: Spindle Diameter ...................... 4.
                                • Spindle diameter: 4.3"
                                • X axis travel: 100"
                                  Hermle C60U MT Dynamic 5-Axis CNC Milling & Turning Center with Pallet
                                  $RFQ
                                  Hermle C60U MT Dynamic 5-Axis CNC Milling & Turning Center with Pallet
                                  Reference #32763 Hermle C60U MT Dynamic 5-Axis CNC Milling & Turning Center with Pallet System FEATURES: Siemens 840D sl 5-Axis CNC Control 47.24" Full B-Axis Tilting & Contouring Rotary Table High Pr
                                  • X axis: 47.24"
                                  • Y axis: 51.18"
                                    63" HNK VTC-16/20 CNC Vertical Turning & Milling Center
                                    $RFQ
                                    63" HNK VTC-16/20 CNC Vertical Turning & Milling Center
                                    Reference #43594 63" HNK VTC-16/20 CNC Vertical Turning & Milling Center FEATURES: Fanuc 31iA CNC Control 12-Station Automatic Tool Changer Milling Spindle Linear Scales on X/Z Axes CAPACITY: Table D
                                    • Swing: 78.74"
                                      FPT Stinger 5-Axis CNC Vert Mach Cntr, 51" x39.3" tbl, XYZ=68/55/
                                      $RFQ
                                      FPT Stinger 5-Axis CNC Vert Mach Cntr, 51" x39.3" tbl, XYZ=68/55/
                                      JOHNFORD SV-32 CNC VERTICAL MACHINING CENTER Model SV-32, S/N MLA160696, New 2016 Stock # Q11913 EQUIPPED WITH: Fanuc Oi-MD CNC Control, Remote Manual Pulse Generator, 10,000 RPM Spindle, 24 Station Automatic Tool
                                      • X axis: 31.5"
                                      • Y axis: 19.7"
                                        Haeger HP6-C Hardware Insertion Press, 12000 LB Force Range, 18" Throa
                                        $RFQ
                                        Haeger HP6-C Hardware Insertion Press, 12000 LB Force Range, 18" Throa
                                        6 TON HAEGER HP6-C HARDWARE INSERTION PRESS Model HP6-C, S/N 1771, New 1997 Stock # Q11777 EQUIPPED WITH: 12,000 LB Range of Force, 18" Throat, 8" Stroke.12,000 LB Range of Force, 18" Throat, 8"
                                        • Tonnage: 6T
                                        • Throat: 18"
                                          2200 MT DANIELI BREDA ALUMINUM EXTRUSION PRESS (14365)
                                          $RFQ
                                          2200 MT DANIELI BREDA ALUMINUM EXTRUSION PRESS (14365)
                                          Tonnage 2200 metric-tons Billet 8 inches
                                          12" x 20" Toyoda GOS32X50 Cylindrical Grinder, 12.6" Swing,
                                          $RFQ
                                          12" x 20" Toyoda GOS32X50 Cylindrical Grinder, 12.6" Swing,
                                          12" X 20" TOYODA GOS32X50 CYLINDRICAL GRINDER Model GOS32X50, S/N RB7823, New 1985 Stock # Q11779 EQUIPPED WITH: 12.6" Swing, 20" Between Centers, 16" Diameter Wheel, 5 HP Spindle, Coolant
                                          • Swing: 12.59"
                                          • Centers: 19.68"
                                            FADAL VMC-20
                                            $5,950
                                            FADAL VMC-20
                                            BOX WAYS, LOW HOURS
                                            • X axis: 40"
                                            • Y axis: 20"
                                              Blanchard 84" Rotary Surface Grinder
                                              $RFQ
                                              Blanchard 84" Rotary Surface Grinder
                                              Blanchard 84" Rotary Surface Grinder S/N: 9401, Stock No: 18350 Model: 42-84 Chuck: 84" Chuck Life, Approximately: 3/4" Distance Under Wheel: 30" Segmented Wheel: 42" Swing Inside Water Gu
                                              • Chuck: 84"
                                                Wysong 150 Ton x 6' Mechanical Press Brake
                                                $RFQ
                                                Wysong 150 Ton x 6' Mechanical Press Brake
                                                Wysong 150 Ton x 6' Mechanical Press Brake S/N: PB20-101, Mfg: 1970, Stock No: 18349 Model: 10004 Capacity, Near Bottom: 150 Tons Capacity, Mid-Stroke: 100 Tons Capacity, Bending: 6' x 0.3125” Mild Steel (W
                                                • Tonnage: 150T
                                                  1989 - 33 Ton Amada Pega 367 CNC Turret Punch
                                                  $RFQ
                                                  1989 - 33 Ton Amada Pega 367 CNC Turret Punch
                                                  Capacity 33 Tons Max Sheet Size 60 x 144' (w/repo) X-Axis Travels 72" Y-Axis Travels Y Axis 60" Throat Depth 60" Max Sheet Thickness 1/4" Max Hole Diameter 4.5" Overall Dimensions 12&#
                                                  • Tonnage: 33T
                                                    72.44" x 236" Tru Turn CW61180L/6000 Manual Lathe, Brand New
                                                    $RFQ
                                                    72.44" x 236" Tru Turn CW61180L/6000 Manual Lathe, Brand New
                                                    Reference #43565 72.44" x 236" Tru Turn CW61180L/6000 Manual Lathe, Brand New FEATURES: Low Hours Inch/Metric Threading Hardened Ways SPECIFICATIONS: Swing Over Bed ....................... 72.44 Swi
                                                    • Swing: 72.44"
                                                    • Centers: 236.11"
                                                      JMT PBH-60 2" x 2" x 3/8" Angle Bending Roll
                                                      $RFQ
                                                      JMT PBH-60 2" x 2" x 3/8" Angle Bending Roll
                                                      Reference #43591 JMT PBH-60 2" x 2" x 3/8" Angle Bending Roll FEATURES: Universal Hardened & Ground Rolls Side Support Portable Control Panel Vertical/Horizontal Orientation SPECIFICATIO
                                                      Custom Hydraulic Table Bender for Bar and Tube
                                                      $RFQ
                                                      Custom Hydraulic Table Bender for Bar and Tube
                                                      Reference #32861 Custom Hydraulic Table Bender for Bar and Tube SPECIFICATION: Bar Capacity .......................... 1.375" Tube Capacity ......................... 2" Flat Bar Capacity ...............
                                                      Ransome #1A-10 1000 Lb. Welding Positioner
                                                      $RFQ
                                                      Ransome #1A-10 1000 Lb. Welding Positioner
                                                      Reference #32860 Ransome #1A-10 1000 Lb. Welding Positioner FEATURES: Vertical/Horizontal Rotation SPECIFICATION: Table Diameter ........................ 30" Table Weight Capacity ................. 1,00
                                                      • Weight capacity: 1000Lb
                                                        Haffner MAC 440-3 4-Axis Aluminum Profile Machining Center
                                                        $RFQ
                                                        Haffner MAC 440-3 4-Axis Aluminum Profile Machining Center
                                                        Reference #43579 Haffner MAC 440-3 4-Axis Aluminum Profile Machining Center CAPACITY: X-Axis Traverse Path .................. 181.10"-368.11" Y-Axis Traverse Path .................. 36.61" Z-Axis T
                                                        • X axis: 181.1"
                                                        • Y axis: 36.61"
                                                          Categories:
                                                          Condition:
                                                          Manufacturer:
                                                          Location:
                                                          Price:
                                                          •  to 
                                                          <Prev | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | Next>