Machine Tools for sale, New & Used | MachineSales.com

3" RUESCH 11 ROLL LEVELER (14322)

$RFQ

Max Width of Workpiece 3 inches RUESCH 11 ROLL LEVELERStock # 14322SPECIFICATIONS&n

Woodbridge, CT
View Listing

16" ROBINSON RENCO WIRE DRAWING DEADBLOCK [14043]

$RFQ

(Used) 16" Diameter Robinson Renco Wire Drawing Deadblcok Machine # 14043 Type Machine: Wire Drawing Deadblock Model: 16DB30VF Serial Number: 3563 Finish Blo

Woodbridge, CT
View Listing

Haas TM-1 CNC Vertical Mill

$RFQ

SPECIFICATIONS: Table Size 10.5” x 47.8” X-Travel 30” Y-Travel 12” Z-Travel 16” Rapid Feedrate (X, Y, Z) 200 ipm Spindle Speed 4,000 RPM Spindle Taper CAT40 Spindle Motor 7.5 HP Approximate Weight 5,000 lbs.

Lake Bluff, IL
View Listing

Cincinnati Milacron Model 220-8 “Centuramic” Centerless Grinder

$RFQ

SPECIFICATIONS: Maximum Capacity, Standard Work Rests Diameter 0-3” Maximum Work Diameter Depending on Work Rest Ordered 4.5” Grinding Wheel Width 1”-8” Grinding Wheel Maximum Diameter 24” Grinding Wheel Minimum Dia

Lake Bluff, IL
View Listing

Haas TM-2 CNC Milling Machine

$16,500

Table: 10" x 57" Spindle: Cat 40 x-Axis Travel: 40" y-Axis Travel: 16" z-Axis Travel: 16" RPM: 4,000RPM Controller: Haas Year: 2004 Voltage / Phase: 240 / 3 Weight: 5,500lbs Dimensions:

Vinton, TX
View Listing

LINDBERG 2350 F ATMOSPHERE BOX FURNACE, ELECTRIC, 24"W 36"L 18&qu

$RFQ

DIGITAL CONTROLS ELECTRIC ATMOSPHERE BOX FURNACE WITH VERTICAL LIFT AIR OPERATED FRONT DOOR. HEATING ELEMENTS ARE ON BOTH SIDE WALLS, REAR WALL AND DOOR,. EQUIPPED WITH (3) GAS FLOSCOPES (ENDOTHERMIC, NATURAL GAS &

Chamber width: 24"
Chamber length: 36"

Tolland, CT
View Listing

LINDBERG 1400 F ELECTRIC BOX DRAW FURNACE 24"W 36"L 18"H

$RFQ

DIGITAL TEMPERATURE CONTROL AIR OPERATED VERTICAL LIFT FRONT DOOR. HEATING ELEMENTS AND BELT DRIVEN CIRCULATING FAN (WITH WATER COOLED SHAFT) ARE MOUNTED IN A CHAMBER BEHIND THE WORK AREA..

Chamber width: 24"
Chamber length: 36"

Tolland, CT
View Listing

POLLUTION CONTROL VPI 52 BURN OFF OVEN 42"W 48"L 44"H

$RFQ

DIGITAL CONTROLS SINGLE SIDE SWING DOOR WITH POSITIVE LATCHING AND PRESSURE RELIEF ROOF PANEL. INTERIOR DOORS, WALLS AND ROOF ARE LINED WITH LIGHT WEIGHT FIBER REFRACTORY. FLOOR IS A POURED CASTABLE REFRACTORY. HEAT (35

Tolland, CT
View Listing

KOIKE-ARONSON PLASMA ARC CUTTING SYSTEM WITH TABLE 10'CAPACITY

$RFQ

NEW 2004 CAPACITY 3100MM (122") ORDER # S0178105 HYPERTHERM HYSPEED HT2000 POWER SUPPLY

Tolland, CT
View Listing

GASBARRE 2150 F ELECTRIC ATMOSPHERE BOX FURNACE 28"W 48"L 28"

$RFQ

DIGITAL CONTROLS ELECTRICALLY HEATED ATMOSPHERE (HYDROGEN & NITROGEN) RETORT BOX FURNACE WITH SIDE SWING DOOR (WATER COOLED DOOR FLANGE). INTERIOR HAS AN ALLOY RETO

Chamber width: 28"
Chamber length: 48"

Tolland, CT
View Listing

ABBOTT 2100 F ATMOSPHERE 12"WIDE BELT FURNACE

$RFQ

DIGITAL CONTROLS 12"WIDE ATMOSPHERE BELT FURNACE WITH ALLOY RETORT CURRENTLY USING A 10"WIDE BELT. PARTS ARE LOADED ON THE VARIABLE SPEED MESH BELT AT 6'LONG ENTRANCE TABLE, PASS THROUGH 3' ENTRANCE P

Chamber width: 12"
Chamber length: 216"

Tolland, CT
View Listing

STEELMAN GAS FIRED BURN OFF OVEN 6'W 3'L 3'H

$RFQ

DIGITAL CONTROLS DOUBLE DOOR OPENING WITH POSITIVE LATCHING. PRIMARY HEAT CHAMBER AND AFTER BURNER CHAMBER ARE MOUNTED ON REAR WALL WITH HEAT (351,000 BTU/HR MAX. TOTAL) SUPPLIED BY TWO PACKAGE BURNERS. HEAT FLOW IS &q

Tolland, CT
View Listing

LUCIFER 1450 F TWO CHAMBER ELECTRIC FURNACE

$RFQ

DIGITAL CONTROLS (2) CHAMBER BOX FURNACE WITH SIDE SWING DOORS AND REAR MOUNTED AIR CIRCULATING FANS. THE TOP CHAMBER IS 18"LONG . BOTTOM CHAMBER IS 48"L

Chamber width: 18"
Chamber length: 48"

Tolland, CT
View Listing

FADAL VMC 15 VERTICAL MACHINING CENTER 1994

$RFQ

FADAL VMC 15 VERTICAL MACHINING CENTER 1994 Serial # 9404163 MODEL........................: 914-15 TRAVELS: X............................: 20" Y............................: 16" Z.....................

Livonia, MI
View Listing

Fadal VMC 3016L Model 904-1L, CNC Vertical Machining Center, 1999

$RFQ

Fadal VMC 3016L Model 904-1L, CNC Vertical Machining Center, 1999 S/N 9910278 Fadal CNC 88 HS CNC Controller, 21-Automatic Tool Changer, CAT40 Taper, Work Light Table Size: 38″x16″ Travels: X Axis 30″ Y Axis

Livonia, MI
View Listing

Fadal VMC 3016L Model 904-1L, CNC Vertical Machining Center, 1999

$RFQ

Fadal VMC 3016L Model 904-1L, CNC Vertical Machining Center, 1999 S/N 9910278 Fadal CNC 88 HS CNC Controller, 21-Automatic Tool Changer, CAT40 Taper, Work Light Table Size: 38″x16″ Travels: X Axis 30″ Y Axis

Livonia, MI
View Listing

3/4" X 30" Eldorado Mega Model M-75-1041 Precision Deep Hole Gun

$RFQ

SPECIFICATIONS: Drilling Diameter Maximum .75” Drilling Diameter Minimum .055” Maximum Drilling Depth 30” Spindle Speeds 725-5860 RPM Drilling Feed Rate .1-99.9 IPM Rapid Feed Rate 200 IPM Work Table 22” x 26” H

Lake Bluff, IL
View Listing

Johnford SV-40 CNC Vert Machining Cntr, 47" x20" tbl, XYZ=41/20/2

$RFQ

JOHNFORD SV-40 CNC VERTICAL MACHINING CENTER Model SV-40, S/N MLB130534, New 2013 Stock # Q11996 EQUIPPED WITH: Fanuc 0i CNC Control, 10000 RPM Cat 40 Spindle, 24 ATC, Spindle Chiller, Chip Pan. SPECIFICATIONS:

X axis: 41"
Y axis: 20"

Cincinnati, OH
View Listing

8' x 1/2" Bertsch 3-Roll Plate Bending Roll w/Air Drop End, Initia

$RFQ

8' x 1/2" BERTSCH 3-ROLL INITIAL PINCH PLATE BENDING ROLL Model #9, S/N M-9980, New 1971 Stock # Q12014 EQUIPPED WITH: 3-Roll Hydraulic Initial Pinch Design, Air Drop End, Power Bottom-Roll Adjustment, Dia

Roll length: 99"
Thickness: 0.406"

Cincinnati, OH
View Listing

HAAS HL-2BB CNC LATHE

$5,950

BIG BORE, PARTS CATCHER, CHIP CONVEYOR, 3400 RPM, 15 HP, 10"CHUCK

Swing: 20"
Centers: 20"

Thousand Oaks, CA
View Listing

CHEVALIER FSG-3A818 SURFACE GRINDER

$8,950

2 HP, 8" GRINDING WHEEL

Table width: 8"
Table length: 18"

Thousand Oaks, CA
View Listing

16-36 Barber Colman Universal Gear Hobber

$RFQ

SPECIFICATIONS: Maximum Rated Diameter Pitch (Nominal) 6DP (4.2 Module) Maximum Rated Work Diameter 16” Maximum Hob Diameter 5” Maximum Hob Slide Travel 36” Maximum Work Slide Travel 8” Main Drive Motor 5HP Approx

Lake Bluff, IL
View Listing

No. 16-36 Barber-Colman Universal Gear Hobber

$RFQ

SPECIFICATIONS: Capacity in Steel, 1 Cut 6 DP (4.2 Mod) Rated Work Diameter Max 16” Travel of Hob Carriage Max 36.5” Distance Work Spindle Face to Tail Center Max 64” Work Spindle to C/L of Hob Spindle Max 39.5” Wo

Lake Bluff, IL
View Listing

Haas VF-2SS Machining Center

$51,500

Table: 14" x 36" Spindle: CAT 40 x-Axis Travel: 30" y-Axis Travel: 16" z-Axis Travel: 20" Tool Turret: 24 RPM: 12,000RPM Controller: Haas Year: 2017 4th axis: Ready 5th axis: Available

Vinton, TX
View Listing

Fadal VMC15 Machining Center

$19,000

Table: 16" x 39" Spindle: BT 40 x-Axis Travel: 30" y-Axis Travel: 16" z-Axis Travel: 20" Tool Turret: 21 RPM: 7,500RPM Controller: Fadal Year: 2006 Voltage / Phase: 220 / 3 Weight: 11,0

Vinton, TX
View Listing

2018 Bradbury Sheet Slitter

$8,000

Lightly used, 2018 Stand Alone Slitter 4.0" diameter hardened & precision ground arbors 42" Passline Maximum Sheet Width 48.50" / Minimum 4.0" Maximum material thickness .048" (18 gauge)

Idaho Falls, ID
View Listing

Fadal VMC15XT Machining Center

$19,500

Table: 16" x 39" Spindle: BT 40 x-Axis Travel: 30" y-Axis Travel: 16" z-Axis Travel: 20" Tool Turret: 21 RPM: 7,500RPM Controller: Fadal Year: 2006 Voltage / Phase: 220 / 3 Weight: 11,0

Vinton, TX
View Listing

National 5/16" Cold Header

$12,500

National 5/16" High Speed Cold Header, DSSD Capacity: 5/16" x 1-1/2" ***Complete inspection report. Has not been used for production since inspection. Specifications: Maximum Cutoff Diameter: 5/16

Maximum workpiece diameter: 0.312"
Maximum workpiece length: 1.5"

Anza, CA
View Listing

MORI SEIKI ZL150S Duel Turret/Sub-spindle Cnc Lathe 2002

$RFQ

MORI SEIKI ZL150S Duel Turret/Sub-spindle Cnc Lathe 2002 S/N ZL150BE0266 SPECIFICATIONS Bar Capacity 1.77" Swing 26.77" Turning Diameter 17.32" Spindle Speed 5,000 RPM Co

Livonia, MI
View Listing

ERBEND 10ft x 16 ga CNC Folder w/10ft x 14 ga Shear-Combo Pkg SAVE BIG $$!

$RFQ

CALL 386-304-3720 FOR AVAILABILITY IN STOCK NOW! CALL FOR SPECIAL COMBO PRICE Distributor Overstock Mega Sale Selling At Well Below Cost with Factory Warranty. Limited Supplies Available. ERBEND 10ft x 16 ga CN

Maximum thickness capacity: 16Ga
Bending length: 126"

Port Orange, FL
View Listing

2008 AMADA Pulsar 2415NT

$RFQ

2008 AMADA Pulsar 2415NT, 4.0 KW, Max sheet size: 16’ X 5, Fanuc NT-PC Control, Year New: 2008 Model: Pulsar 2415NT Laser Power: 4.0 KW Laser Type: High Bred Max Sheet Size: 16’ X 5’ Reposition: Yes Z Axis Travel

Wattage: 4000W
X axis travel: 5'

Bellport, NY
View Listing

2018 AMADA LCG3015AJ

$RFQ

AMADA LCG3015AJ, 2.0KW, 120” X 60” Max Sheet Size, Fanuc NT-PC Control, Year New: 2018 Model: LCG3015AJ Laser Power: 2.0KW Laser Type: Flying Optic Max Sheet Size: 120” X 60” Shuttle Table: Yes Z Axis Travel: 7.8

Wattage: 2000W
X axis travel: 5'

Bellport, NY
View Listing

MITSUBISHI FX-1 WIRE EDM

$4,950

SUBMERGED

X axis travel: 14"
Y axis travel: 10"

Thousand Oaks, CA
View Listing

BLANCHARD GRINDER

$7,950

42" CHUCK

Chuck: 42"

Thousand Oaks, CA
View Listing

MATTISON HORIZONTAL SURFACE GRINER

$7,950

18X72

Table width: 18"
Table length: 72"

Thousand Oaks, CA
View Listing

TSUGAMI BS-19 SWISS CNC SCREW MACHINE

$39,500

FANUC CONTROL, IEMCA ELITE 220 BAR FEEDER

Thousand Oaks, CA
View Listing

Okuma MC-V4020 Vertical Machining Center

$RFQ

Okuma MC-V4020 Vertical Machining Center Year: 2000 Specifications: Table Size: 48" x 20" X Travel: 40" Y Travel: 20" Z Travel: 17" Max Table Load: 1500 Lbs Spindle Nose to Table: 6

Livonia, MI
View Listing

DOOSAN LYNX 220 LMS CNC LATHE 2009

$RFQ

DOOSAN LYNX 220 LMS CNC LATHE 2009 • BRAND: DOOSAN • YEAR: 2009 • MODEL: LYNX 220 LMS • APPLICATION TYPE: TURNING • MACHINE TYPE: TURN-MILL CENTRE • • CONTROL UNIT BRAND: FANUC i Technical Information - DOOSAN L

Livonia, MI
View Listing

Mazak V414 CNC VMC, 1993

$RFQ

Mazak V414 CNC VMC, 1993 X-Axis: 22.05″ Y-Axis: 16.14″ Z-Axis: 18.11″ Table Top to Spindle Nose: 5.91″- 24.02″ Rapid Traverse Rate X, Y Axis: 945 IPM Rapid Traverse Z-Axis: 590 IPM Tool Storage Capacity: 30 Spind

Livonia, MI
View Listing

HEM H100A HORIZONTAL AUTOMATIC BAND SAW

$7,950

12" X 12" , 3 HP

Thousand Oaks, CA
View Listing

90 Ton x 6' Cincinnati 90CB-II CNC Hydaulic Press Brake (Control Update

$RFQ

Capacity 90 Tons Bed Length 8' Distance Between Housings 6'6 Stroke 8" Open Height 15" Throat 7" Approach Speed 150 IPM Form Speed 21 - 71 IPM Return Speed 136 IPM Main Motor 15 HP Weight

Tonnage: 90T

SANTA ANA, CA
View Listing

METALFLEX 90W 4CC

$RFQ

METALFLEX 90W 4CC Spiral Duct Lock Forming Machine for sale, Manufactured in 1991. Features include PLC control, up-acting saw, 6" - 24" spiral duct capability, and a 7.5 HP motor. Includes 15 KVA transformer

Bedford, OH
View Listing

SULLAIR LS-16 ROTARY SCREW COMPRESSOR

$7,950

75 HP

Thousand Oaks, CA
View Listing

H & H SPOT WELDER

$4,950

UNDER POWER & RUNNING

Thousand Oaks, CA
View Listing

AMADA FS81-010 POWER SQUARING SHEAR

$14,950

UNDER POWER & RUNNING

Maximum thickness: 10Ga
Cutting length: 4"

Thousand Oaks, CA
View Listing

55 TON AMADA CNC PRESS BRAKE

$29,500

NC9-EX CNC CONTOL, UNDER POWER & RUNNING

Tonnage: 55T

Thousand Oaks, CA
View Listing

DELTECH 2900 F ELECTRIC BELL (TOP HAT) FURNACE

$RFQ

TOP HAT DESIGN WHERE FURNACE BODY IS LIFTED (AIR) FROM THE ROLL OUT BASE. INTERIOR IS LINED WITH LIGHT WEIGHT REFRACTORY AND HEATED BY "U" SHAPED MOLYDISILICIDE HEATING ELEMENTS HANGING DOWN FROM THE ROOF ON A

Chamber width: 48"
Chamber length: 24"

Tolland, CT
View Listing

2003 MORI SEIKI NV5000A/40 DUAL PALLET

$RFQ

Very clean heavy duty machine with dual pallet APC system, this Mori Seiki NV-5000A/40 vertical machining center has 12,000 RPM and is coming out of an aerospace plant.

X axis: 31.5"
Y axis: 20"

Hunt Valley, MD, MD
View Listing

2016 KITAMURA MYTRUNNION-4G

$RFQ

With a built-in trunnion, this 2016 Kitamura Mytrunnion-4G is designed for high precision A-axis, C-axis, and simultaneous 5-axis machining. Machine includes Through Spindle Coolant, Renishaw Probing, and boasts 100 ATC

Hunt Valley, MD, MD
View Listing

2011 OKUMA MB-5000H

$RFQ

2011 OKUMA MB-5000H HMC with 15,000 RPM spindle, full 4th axis, 60 ATC, probes, and high-pressure coolant. Ready for immediate purchase.

X axis: 29.92"
Y axis: 29.92"

Hunt Valley, MD, MD
View Listing

buy & sell, new & used machinery, machine tools & equipment

Machine Tools For Sale

buy & sell, new & used machinery, machine tools & equipment

Machines currently for sale:

Machine Tools For Sale