buy & sell, new & used machinery, machine tools & equipment

Machine Tools

Machine Tools For Sale

15488 new & used machine tools items for sale
<Prev | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | 52 | Next>
Refine: Viewing 5001 - 5100 of 15488 matches
Sort by:
Items Per Page:  20 |  50 |  100
COMPLETE BRASS & SANITARY FITTINGS PLANT FOR FAUCETS, FIXTURES, ETC. (10068)
$RFQ
COMPLETE BRASS & SANITARY FITTINGS PLANT FOR FAUCETS, FIXTURES, ETC. (10068)
MACHINERY INTERNATIONAL CORPORATION is pleased to offer a complete factory forthe production of brass plumbing fixtures, including the following products:Bath FixturesLavatory MixersSink MixersFaucetsSeveral Types of Chr
2000 Lb., BERTOLETTE MODEL 2CP, DOUBLE END, AIR BRAKE (8171)
$RFQ
2000 Lb., BERTOLETTE MODEL 2CP, DOUBLE END, AIR BRAKE (8171)
MACHINE # 8171 SPECIFICATIONS MANUFACTURER BERTOLETTE MODEL 2CP TYPE DOUBLE END UNCOILER CAPACITY 2,000 LBS. MANDREL -WIDTH
4,000 Lb. x 10", ADS, DUAL-ARM UNCOILER, DUAL ARM-SWIVEL PAYOFF, (6585)
$RFQ
4,000 Lb. x 10", ADS, DUAL-ARM UNCOILER, DUAL ARM-SWIVEL PAYOFF, (6585)
MACHINE # 6585MANUFACTURER: ADS MFG. CO.TYPE: DUAL-ARM, SWIVEL TYPE, PAYOFFCOIL CAPACITY: MAX. COIL WEIGHT (EACH ARM): 4,000 LBS. MANDREL FACE WIDTH: 12"
20,000 Lb. x 48", PAXSON, RECOILER, W/OVERARM SEPARATOR, 60 HP, HYD. (6583)
$RFQ
20,000 Lb. x 48", PAXSON, RECOILER, W/OVERARM SEPARATOR, 60 HP, HYD. (6583)
MACHINE #6583MANUFACTURER: PAXSON MACHINE CO.CAPACITY: 20,000 LBS. MAX. COIL WEIGHTTYPE: EXPANDING MANDRELTYPE OF EXPANSION: HYDRAULI
1 3/4"- 1/8", BERTOLETTE, No. 315, TUBE CUTOFF LINE (6152)
$RFQ
1 3/4"- 1/8", BERTOLETTE, No. 315, TUBE CUTOFF LINE (6152)
MACHINE # 6152SPECIFICATIONS:SERIAL NUMBER 315331TUBE CAPACITY: 1/8"- 1 3/4" O.D. x .065" WALL (ANY MATERIAL) WITHOUT USING ROTARY CUT
20", No. DA-03-2020, FASTENER ENGINEERING, VARIDRIVE, BLOCK DIA 20" (4989)
$RFQ
20", No. DA-03-2020, FASTENER ENGINEERING, VARIDRIVE, BLOCK DIA 20" (4989)
Machine # 4989 MANUFACTURER: FASTENER ENGINEERING CO MODEL: DA-03-2020 CAPSTAN DIAMETER: 20" -DOUBLE CAPSTAN REDUCTION CAPABILITY -60,000 PSI TENSILE .024 SQ/IN MAXIMUM -80,000 PS
3"Cap, FENN, No. 30-3, 1981, HYD., SINGLE STROKE, TUBE END FORMER (4869)
$RFQ
3"Cap, FENN, No. 30-3, 1981, HYD., SINGLE STROKE, TUBE END FORMER (4869)
MACHINE # 4869 MODEL: 30-3 FENN HYDRAULIC TUBE END FORMER CLAMP PRESSURE 50,000 LBS. RAM PRESSURE 30,000 LBS. STROKE 0" TO 4
12" (300mm) x 14" (350mm), CARL WEZEL, 2 HIGH ROLLING MILL PRECISION, AGC, HYD.
$RFQ
12" (300mm) x 14" (350mm), CARL WEZEL, 2 HIGH ROLLING MILL PRECISION, AGC, HYD.
12" (300mm) x 14" (350mm) Carl Wezel 2 High Rolling MillMACHINE #4228MANUFACTURER: CARL WEZEL K.G. (KRUPP)MODEL: BW 300/350ROLL SIZE: 12" DIA. x 14" FACE(300mm Dia. x 350mm Face)SERIAL NUMBER: 740523YEAR OF MANUFACTURE:
8 1/2" WATERBURY FARREL, No. ZR 15 8 1/2, SENDZIMIR ROLLING MILL (1610)
$RFQ
8 1/2" WATERBURY FARREL, No. ZR 15 8 1/2, SENDZIMIR ROLLING MILL (1610)
MACHINE # 1610Manufacturer Waterbury Farrel Co.Model ZR 15 - 8-1/2"Type Saddle Type 1-2-3Roll Size .468" (11.88mm) wor
Nardini 25" x 92" Gap Bed Engine Lathe
$RFQ
Nardini 25" x 92" Gap Bed Engine Lathe
Nardini 25" x 92" Gap Bed Engine Lathe S/N: G4-BKBBR72, Mfg: 2021, Stock No: 18339 Model: ND-325 Swing Over Bed: 25" Swing in Gap: 32" Swing Over Cross Slide: 18" Distance Between Centers:
  • Swing: 25"
  • Centers: 92"
    Haas EC-400 CNC Horz Mach Center,(2) 15.75"x15.75" Pallets, X/Y/Z
    $RFQ
    Haas EC-400 CNC Horz Mach Center,(2) 15.75"x15.75" Pallets, X/Y/Z
    HAAS EC-400 CNC HORIZONTAL MACHINING CENTER Model EC-400, S/N 2053546, New 2011 Stock # Q11202 EQUIPPED WITH: Haas CNC Control, (2) 15.75" x 15.75" 1-Degree Pallet w/Pallet-Shuttle, 8100 Max Spindle RPM,
    • X axis: 20"
    • Y axis: 20"
      Rottler F9A
      $52,000
      Rottler F9A
      Overview The FA machines are the industry standard worldwide for boring bars. Designed for all automotive blocks up to big block V8's and small diesel blocks, the F9A will produce accurate bores for a lifetime. The
      USED HYMSON 5' X 10' 3,000 WATT FIBER OPTIC LASER MODEL HF3015B, Stock# 11011, Year: 2018
      $RFQ
      USED HYMSON 5' X 10' 3,000 WATT FIBER OPTIC LASER MODEL HF3015B, Stock# 11011, Year: 2018
      Brand: HymsonModel: HF3015BSpecifications:&nbsp;X-axis travel: 59" (1,500mm)Y-axis travel: 118" (3,000mm)Z-axis travel: 9.4" (240mm)X/Y axis max speed: 5,511 IPM (140m/min)Max work load: 2,200 Lbs. (1000kg)Max. cutti
      USED HEM 24" X 28.5" SEMI-AUTOMATIC VERTICAL TILT FRAME BANDSAW MODEL V140HM60,
      $RFQ
      USED HEM 24" X 28.5" SEMI-AUTOMATIC VERTICAL TILT FRAME BANDSAW MODEL V140HM60,
      Throat Cap 24 inches Work Height 28.5 inc
      SUNMILL MODEL JMV-1600 CNC VERTICAL MACHINING CENTER
      $RFQ
      SUNMILL MODEL JMV-1600 CNC VERTICAL MACHINING CENTER
      BOX WAY CONSTRUCTION ON ALL 3 AXES FOR MAXIMUM RIGIDITY RIGID 6,000 RPM SPINDLE WITH GEARBOX FOR HEAVY DUTY CUTTING MAX TABLE LOAD CAPACITY OF 4,409 LBS. FOR MACHINING HEAVY PARTS 32 TOOL MAGAZINE DUAL ARM ATC FULLY
      • X axis: 63"
      • Y axis: 33.46"
        SUNMILL MODEL JMV-1800, CNC VERTICAL MACHINING CENTER
        $RFQ
        SUNMILL MODEL JMV-1800, CNC VERTICAL MACHINING CENTER
        BOX WAY CONSTRUCTION ON ALL 3 AXES FOR MAXIMUM RIGIDITY RIGID 6,000 RPM SPINDLE WITH GEARBOX FOR HEAVY DUTY CUTTING MAX TABLE LOAD CAPACITY OF 5,511 LBS. FOR MACHINING HEAVY PARTS 32 TOOL MAGAZINE DUAL ARM ATC FULLY
        • X axis: 70.86"
        • Y axis: 33.46"
          JONES & LAMSON 12"X45" THREAD GRINDER
          $7,500
          JONES & LAMSON 12"X45" THREAD GRINDER
          NEW FREQUENCY DRIVE, NEW SPINDLE & AC DRIVE, ASSORTED GEARS, MANUALS, UNDER POWER & RUNNING
          Okuma MCR-B III 30/50 5-Face CNC Double Column Vertical Machining Center
          $RFQ
          Okuma MCR-B III 30/50 5-Face CNC Double Column Vertical Machining Center
          Reference #32470 Okuma MCR-B III 30/50 5-Face CNC Double Column Vertical Machining Center FEATURES: OSP P300M CNC Control 72-Position ATC 2-Station Auto Head Changer SPECIFICATIONS: Table Size ................
          Doosan BM2035M CNC Bridge Type Vertical Machining Center
          $RFQ
          Doosan BM2035M CNC Bridge Type Vertical Machining Center
          Reference #32493 Doosan BM2035M CNC Bridge Type Vertical Machining Center FEATURES: Fanuc 31iB CNC Control 40-Station Automatic Tool Changer 12,000 RPM Spindle Scales on X/Y/Z Axes SPECIFICATION: Table
          26" x.105" x 20,000# Ruesch Slitting Line with Slip Core Drum
          $RFQ
          26" x.105" x 20,000# Ruesch Slitting Line with Slip Core Drum
          26" x.105" x 20,000# Ruesch Slitting Line with Slip Core Drum S/N: N3047C 6366, Stock No: 020049 Thickness Range: .010" - .105" Maximum Cut Thickness: .324" Arbor Diameter: 4-1/8" Coil
          • Maximum workpiece width: 27"
          • Maximum workpiece thickness: 4.125"
            Southwestern Industries TRM 1840 CNC Lathe
            $13,500
            Southwestern Industries TRM 1840 CNC Lathe
            Swing over bed: 18" Spindle bore: 2" Between centers: 40" Tailstock spindle taper: 1-1/2" Voltage: 220v / 3 Phase Dimensions: 108" x 54" x 72"
            • Swing: 18"
            • Centers: 40"
              Supertec STG-600S Grinder
              $8,700
              Supertec STG-600S Grinder
              Type: Hydraulic Grinding wheel size: 15" Table: 7-1/4" x 38" Between centers: 18" HP: 6.4 Voltage: 220v / 3 Phase Weight: 8,000 lbs Dimensions: 102" x 65" x65"
              Spring Water Mfg. Co Inc. HPX115 Hydraulic Punch Machine
              $10,000
              Spring Water Mfg. Co Inc. HPX115 Hydraulic Punch Machine
              Type: Hydraulic Voltage: 480v / 3 Phase Dimensions: 48" x 56" x 82" Capacity: 70 Tons
              Thompson Grinder 2F Hydraulic
              $7,800
              Thompson Grinder 2F Hydraulic
              Type: Hydraulic Grinding wheel size: 8" x 1-1/4" Table: 8" x 24" Table type: Magnetic HP: 0.5 Voltage / Phase: 440 | 3 Dimensions: 52" x 86" x 85"
              Wayne HYD Hydraulic Press
              $18,000
              Wayne HYD Hydraulic Press
              Type: Hydraulic Stroke: 17" Table: 40" x 37" HP: 25 Voltage: 220v / 3 Phase Dimensions: 60" x 42" x 127" Capacity: 80 Tons
              • Tonnage: 80T
              • Stroke: 17"
                Speed-Bend PRO 12.3×192 Ermaksan Press Brake
                $RFQ
                Speed-Bend PRO 12.3×192 Ermaksan Press Brake
                PRODUCT NEW: IN STOCK Type: Hydraulic CNC Bed length: 12' 4" Between housings: 10' 7" Stroke: 10.8" Depth of Throat: 16" Backgauge: Motorized Axis: 6 Crowning: Motorized Controller: D
                • Tonnage: 192T
                  BLM Adige 2500 Watt LT 712D CNC Tube Laser
                  $RFQ
                  BLM Adige 2500 Watt LT 712D CNC Tube Laser
                  Reference #32411 BLM Adige 2500 Watt LT 712D CNC Tube Laser SPECIFICATIONS: Rated Laser Output .................... 2500 Watts Maximum Bar Length .................... 236.22" Minimum Bar Length for Auto Bundl
                  • Wattage: 2500W
                    Doosan DNM 500 CNC Vertical Machining Center
                    $RFQ
                    Doosan DNM 500 CNC Vertical Machining Center
                    Reference #32479 Doosan DNM 500 CNC Vertical Machining Center CAPACITY: X-Axis Travel ......................... 40.15" Y-Axis Travel ......................... 21.26" Z-Axis Travel .......................
                    • X axis: 40.15"
                    • Y axis: 21.26"
                      2013 HAAS VF2SS
                      $RFQ
                      2013 HAAS VF2SS
                      2013 HAAS VF2SS S/N 1083684 Specs: X Axis Travel: 30" Y Axis Travel: 16" Z Axis Travel: 20" Rapid Rate X Axis: 1,400 IPM Rapid Rate Y Axis: 1,400 IPM Rapid Rate Z Axis: 1,400 IPM Table Size: 36&q
                      1992 - 187 Ton x 13' Amada HFB-1704 CNC Press Brake
                      $RFQ
                      1992 - 187 Ton x 13' Amada HFB-1704 CNC Press Brake
                      Capacity 187 US Tons Overall Bending Length 156" Distance Between End Frames 148" Length of Stroke 7" Open Height 17.88" Throat Depth 16.1" Fast Approach Speed 240 IPM Fast Return Speed 18
                      • Tonnage: 187T
                        Whitney 3400 RTC-60 Punch Plasma Machine
                        $RFQ
                        Whitney 3400 RTC-60 Punch Plasma Machine
                        Whitney 3400 RTC-60 Punch Plasma Machine S/N: 680-850-43418, Mfg: 1998, Stock No: 87340 Model 3400 RTC-60 680-850 Combination Punch Capacity: 40 Tons Sheet Width: 60" (Max) Travels: X-Axis 140"
                        Madison Hecktobore adjustable taper 50 tool holder, model 3011-318-27000
                        $RFQ
                        Madison Hecktobore adjustable taper 50 tool holder, model 3011-318-27000
                        Madison Hecktobore adjustable taper 50 tool holder, model 3011-318-27000
                        Flynn Manufacturing Co. adjustable taper 50 tool holder, Model 33
                        $RFQ
                        Flynn Manufacturing Co. adjustable taper 50 tool holder, Model 33
                        Flynn Manufacturing Co. adjustable taper 50 tool holder, Model 33
                        Lucas taper 50 taping tool holder, model 1T
                        $RFQ
                        Lucas taper 50 taping tool holder, model 1T
                        Lucas taper 50 taping tool holder, model 1T
                        Lucas taper 50 taping tool holder, model 1T
                        $RFQ
                        Lucas taper 50 taping tool holder, model 1T
                        Lucas taper 50 taping tool holder, model 1T
                        WEBSTER & BENNETT 16801 FIBER GEAR
                        $RFQ
                        WEBSTER & BENNETT 16801 FIBER GEAR
                        56 TOOTH FIBER GEAR
                        WEBSTER & BENNETT BORING BAR LOCKING PAD & SCREW ASSEMBLY WB1778 &a
                        $RFQ
                        WEBSTER & BENNETT BORING BAR LOCKING PAD & SCREW ASSEMBLY WB1778 &a
                        This boring bar locking pad and screw assembly creates a powerful and efficient locking arrangement to secure boring bars to the turret with its serations. This part can be found on page 70/71 in the "DH" serie
                        WEBSTER & BENNETT BORING BAR LOCKING PAD & SCREW ASSEMBLY WB1778 &a
                        $RFQ
                        WEBSTER & BENNETT BORING BAR LOCKING PAD & SCREW ASSEMBLY WB1778 &a
                        This boring bar locking pad and screw assembly creates a powerful and efficient locking arrangement to secure boring bars to the turret with its serations. This part can be found on page 70/71 in the "DH" serie
                        WEBSTER & BENNETT BORING BAR LOCKING PAD & SCREW ASSEMBLY WB1778 &a
                        $RFQ
                        WEBSTER & BENNETT BORING BAR LOCKING PAD & SCREW ASSEMBLY WB1778 &a
                        This boring bar locking pad and screw assembly creates a powerful and efficient locking arrangement to secure boring bars to the turret with its serations. This part can be found on page 70/71 in the "DH" serie
                        Devlieg Microbore taper 50 tool holder, model MB-8107
                        $RFQ
                        Devlieg Microbore taper 50 tool holder, model MB-8107
                        Length - 15(3/4)inch, Diameter - 3(3/4)inch, 8LBS
                        Devlieg Microbore Flashchange taper 50 tool holder, model 50FC-62
                        $RFQ
                        Devlieg Microbore Flashchange taper 50 tool holder, model 50FC-62
                        Length - 13(7/8)inch, Diameter - 3(3/4)inch, Weight - 7LBS
                        Universal Eng. taper 50 tool holder, model 469621
                        $RFQ
                        Universal Eng. taper 50 tool holder, model 469621
                        Length - 8(3/8)inch, Insert Diameter - 1(3/4)inch, Weight - 6LBS, 469621
                        Kearney & Trecker taper 50 tool holder, model 4509
                        $RFQ
                        Kearney & Trecker taper 50 tool holder, model 4509
                        Length - 11(1/4)inch, Diameter - 4(1/4)inch, Weight - 5 LBS, (5 1(1/4)B3(1/2)
                        Falcon Tool Co. taper 50 tool holder, model 7257 0272
                        $RFQ
                        Falcon Tool Co. taper 50 tool holder, model 7257 0272
                        Length - 10(1/2)inch, Diameter - 5(3/8)inch, Weight - 11LBS
                        Milltronics Partner VM17 60"X 16" Vert Machining Center W/Centuri
                        $RFQ
                        Milltronics Partner VM17 60"X 16" Vert Machining Center W/Centuri
                        Milltronics Partner VM17 60"X 16" Vert Machining Center W/Centurion V Control New 97 Make: Milltronics serial 4105 Model: Partner VM-17 Year New: 1997 Control: Centurion VI Table Size: 45" X 16"
                        Tru Turn 1840/6M 72.44" x 236" Manual Lathe, Brand New
                        $RFQ
                        Tru Turn 1840/6M 72.44" x 236" Manual Lathe, Brand New
                        Reference #32471 Tru Turn 1840/6M 72.44" x 236" Manual Lathe, Brand New FEATURES: Inch/Metric Threading Hardened Ways CAPACITY: Swing Over Bed ....................... 72.44" Swing Over Cross Slide
                        • Swing: 72"
                        • Centers: 236"
                          Erickson taper 50 tool holder, model 50NMTB
                          $RFQ
                          Erickson taper 50 tool holder, model 50NMTB
                          Length - 9(1/4)inch, Diameter - 3(1/2)inch, Insert Diameter - (15/16)inch, Weight - 4LBS, 3-60-211-303, Quickchange
                          Scully Jones Morris taper 3-2, model 3-2MT
                          $RFQ
                          Scully Jones Morris taper 3-2, model 3-2MT
                          Length - 7(5/8)inch, Diameter - 1(7/16)inch, Insert Diameter - 1inch, 3LBS, 777769
                          Collis morris taper 3, model 3x3MT
                          $RFQ
                          Collis morris taper 3, model 3x3MT
                          Length - 8(1/2)inch, Diameter - 1(7/16)inch, insert diameter - (15/16)inch, Weight - 3LBS, 60433
                          5-2 morris taper tool adaptor
                          $RFQ
                          5-2 morris taper tool adaptor
                          5-2 morris taper tool adapter, drill included, Length - 10(1/4)inch, Diameter - 1(3/4), 4LBS
                          5-6H morris taper tool adapter
                          $RFQ
                          5-6H morris taper tool adapter
                          Length - 8(5/8)inch, Diameter - 2(19/36)inch, insert diameter - 1(11/16)inch, 6LBS
                          Kelly Reamer taper 50 tool holder, model B-3425
                          $RFQ
                          Kelly Reamer taper 50 tool holder, model B-3425
                          Length - 13(3/8)inch, Diameter 1(3/4), Insert hole - (3/8)inch, Weight - 6LBS
                          Devlieg Microbore taper 50 tool holder, model 40FC-H1034
                          $RFQ
                          Devlieg Microbore taper 50 tool holder, model 40FC-H1034
                          Length - 7(5/8)inch, Diameter - 3(3/4), Insert Diameter - 1(3/4)inch, Weight - 9LBS
                          Putnam taper 50 tool holder, model PLH501
                          $RFQ
                          Putnam taper 50 tool holder, model PLH501
                          Length - 10(1/4)inch, Diameter - 3(7/16)inch, Insert Diameter - 1(1/2)inch, Weight - 9LBS
                          Komet RB taper 50 tool holder, model ABS80 CAT50
                          $RFQ
                          Komet RB taper 50 tool holder, model ABS80 CAT50
                          Length - 8inch, Diameter - 3(7/8)inch, Insert Diameter - 1(3/4)inch, Weight - 10LBS
                          Sandvick Coromant T-Max shell mill head
                          $RFQ
                          Sandvick Coromant T-Max shell mill head
                          Diameter - 6(7/8)inch, 6(3/8)inch from tooth to tooth, 13LBS, 10 teeth, (RA265.2-160M), (815832), Wedge# - 265.2-826
                          Hurco BX40i CNC Vert Machining Center, WinMax5, 41"x27" Tbl, XYZ
                          $RFQ
                          Hurco BX40i CNC Vert Machining Center, WinMax5, 41"x27" Tbl, XYZ
                          HURCO BX40i CNC VERTICAL MACHINING CENTER Model BX40i, S/N SB473-1E00157ABJCH, New 2019 Stock # Q11388 EQUIPPED WITH: WinMax 5 Double Screen CNC Control, 18,000 RPM High Speed Spindle, Advanced Verification Graphic
                          • X axis: 40.2"
                          • Y axis: 27.6"
                            Bullard 56VTL VN20 Vertical Turret Lathe Allen Bradley Controls
                            $RFQ
                            Bullard 56VTL VN20 Vertical Turret Lathe Allen Bradley Controls
                            Bullard Vertical Turret Lathe with Hoffacker head and Allen Bradley controls. Has tool changer and holders. Under power, runs well, and holds tight tolerances. Make offer. Need to move ASAP.
                            Devlieg Microbore taper 50 tool holder, model 50M-E62
                            $RFQ
                            Devlieg Microbore taper 50 tool holder, model 50M-E62
                            Length - 11(5/8)inch (Endmill included), Diameter - 3(3/4)inch, Insert Diameter - (5/8)inch, Weight - 5LBS
                            Futurmill milling tool, model ZP1M-0406RH
                            $RFQ
                            Futurmill milling tool, model ZP1M-0406RH
                            Diameter - 4(1/16)inch, Height - 2(3/8)inch, Weight - 5LBS, (ZP1M-0406RH), Wedge# - 80909-1, (RB-12), (R-5043), 6 teeth
                            Kennametal taper 50 tool holder with Cyclone milling tool
                            $RFQ
                            Kennametal taper 50 tool holder with Cyclone milling tool
                            Total Length - 9(1/4)inch, Total Diameter - 7inch, Weight - 25LBS, This is a Kennametal Toolholder with a Cyclone Cutting head. Kennametal Holder - (158641CB5), Kennametal screw - (KLS20)(S4CE4), Cyclone cutter - (CNP30
                            Ingersoll taper 50 tool holder, model A-21128-2
                            $RFQ
                            Ingersoll taper 50 tool holder, model A-21128-2
                            Length - 11(1/2)inch, Diameter - 3(7/8)inch, Weight - 15LBS, (22J 350445 R 01), Blade No. - (625-141538-01) Wedge No. - (1M433R01) and (1M433R02)
                            Taper 50 tool holder, model 180269s117-1
                            $RFQ
                            Taper 50 tool holder, model 180269s117-1
                            Length - 10(1/2)inch, Diameter - 3(15/16)inch, Weight - 17LBS, 28 Teeth
                            Devlieg Microbore Flashchange taper 50 tool holder, model TH50FC-BS143-45
                            $RFQ
                            Devlieg Microbore Flashchange taper 50 tool holder, model TH50FC-BS143-45
                            Length - 15inch, Diameter - 3(3/4)inch, Weight - 15LBS,
                            Neal Skokie taper 50 tool holder, model no. 511/4
                            $RFQ
                            Neal Skokie taper 50 tool holder, model no. 511/4
                            Length - 14inch, Diameter - 3(15/16)inch, Weight - 14LBS, Insert Diameter - 1(1/4)inch, Endmill included
                            Ingersoll taper 50 tool holder, model B-80944-0
                            $RFQ
                            Ingersoll taper 50 tool holder, model B-80944-0
                            Height - 8inch, Diameter - 5inch, Weight - 15LBS, 8 Teeth, (LTC 11-80), (671C04R01), (50ST6)
                            Universal Eng. taper 50 tool holder with Greenleaf Corp. 5inch cutting tool
                            $RFQ
                            Universal Eng. taper 50 tool holder with Greenleaf Corp. 5inch cutting tool
                            Length - 8(1/2)inch, Diameter - 5(3/4)inch, Weight - 21LBS, Cutting Head - Greenleaf Corp. 5Inch cutting diameter, (ETRP), R.H. (5318R), Insert - TPCN-53N8
                            Taper 50 tool holder with 3(3/16)inch cutting diameter
                            $RFQ
                            Taper 50 tool holder with 3(3/16)inch cutting diameter
                            Length - 13(1/4)inch, Diameter - 4(1/16)inch, Cutting Diameter - 3(3/16)inch, Weight - 17LBS, Wedge - 81010, Toolhead - (ZN3M.0304.2190.R.H), Toolholder - Unknown
                            Putnam taper 50 tool holder, model PLH503
                            $RFQ
                            Putnam taper 50 tool holder, model PLH503
                            Length - 8(3/4)inch, Diameter - 3(3/4)inch, Insert Diameter - 2inch, Weight - 10LBS
                            VR/Wesson cutting tool, model FHR6-0307RS-9
                            $RFQ
                            VR/Wesson cutting tool, model FHR6-0307RS-9
                            Cutting Diameter - 7inch(Widest point), Height 2(3/8)inch, Weight - 15LBS, R.H. Whisper-cut, Rapid Set, (2B-58139), (STD-29431), 9/84
                            Taper 50 tool holder with 3(15/16)inch cutting diameter, model 188.360.117.
                            $RFQ
                            Taper 50 tool holder with 3(15/16)inch cutting diameter, model 188.360.117.
                            Tool Length - 10(5/8), Retention Knob - 9inch, Diameter - 4inch, Cutting Diameter - 3(15/16)inch, Weight - 20LBS,
                            Morris taper #5, model 5MT5
                            $RFQ
                            Morris taper #5, model 5MT5
                            Length - 8(1/4)inch, Diameter - 2(3/4)inch, Weight - 3LBS, (3-79), (5MT5), (LTC)
                            Taper 50 tool holder with 3(1/32)inch cutting diameter
                            $RFQ
                            Taper 50 tool holder with 3(1/32)inch cutting diameter
                            Length - 12(1/8)inch, Diameter - 3(3/4)inch, Cutting Diameter - 3(1/32)inch, Weight - 10LBS
                            Morris taper #5, with (3/8)inch insert width, model 188
                            $RFQ
                            Morris taper #5, with (3/8)inch insert width, model 188
                            Length - 13inch, Diameter - 1(3/4)inch, Insert width - (3/8)inch, Weight - 7LBS, (188), (4)
                            Morris taper #5, with (3/8)inch insert width, model 137
                            $RFQ
                            Morris taper #5, with (3/8)inch insert width, model 137
                            Length - 12inch, Diameter - 1(3/4)inch, Insert Size - (3/8)inch, Weight - 6LBS, (137), (4)
                            WEBSTER & BENNETT FIBER GEAR
                            $RFQ
                            WEBSTER & BENNETT FIBER GEAR
                            For 36inch Webster and Bennett Machine, 65 Teeth, OD Diameter - 8(13/32)inch, ID Diameter - 4inch, Height - 1(1/32), Weight - 2LBS 4OZ
                            Poreba TCG-160 x 10M Heavy Duty Manual Lathe
                            $RFQ
                            Poreba TCG-160 x 10M Heavy Duty Manual Lathe
                            Reference #32445 Poreba TCG-160 x 10M Heavy Duty Manual Lathe FEATURES: 63" 4-Jaw Independent Chuck Inch/Metric Threading Power Tailstock 100 HP Main Spindle Motor 40 Ton Weight Capacity CAPACITY: Maxim
                            • Swing: 63"
                            • Centers: 393.7"
                              WEBSTER & BENNETT FIBER GEAR
                              $RFQ
                              WEBSTER & BENNETT FIBER GEAR
                              Inside Diameter - 4inch, Outside Diameter - 9(3/8)inch, Height - (17/32)inch, Weight - 1LB 8OZ, 110 Teeth
                              VALENITE 40 TAPER TOOL HOLDER WITH INDEXABLE BORING BAR
                              $RFQ
                              VALENITE 40 TAPER TOOL HOLDER WITH INDEXABLE BORING BAR
                              Valenite holder............... (V40CT-E75-175), (10/56513/95) Valenite indexable boring bar................ (50K1R10W3-SRC2), (1T6), (PT-543T), Diameter - .500in inserts included Shipped in box 5x5x5, Weighs 4LBS
                              WEBSTER & BENNETT BORING BAR LOCKING PAD WB1778
                              $RFQ
                              WEBSTER & BENNETT BORING BAR LOCKING PAD WB1778
                              This boring bar locking pad creates a powerful and efficient locking arrangement to secure boring bars to the turret with its serations. This part can be found on page 70/71 in the "DH" series manual. As well a
                              WEBSTER & BENNETT BORING BAR LOCKING PAD WB1778
                              $RFQ
                              WEBSTER & BENNETT BORING BAR LOCKING PAD WB1778
                              This boring bar locking pad creates a powerful and efficient locking arrangement to secure boring bars to the turret with its serations. This part can be found on page 70/71 in the "DH" series manual. As well a
                              WEBSTER & BENNETT BORING BAR LOCKING PAD WB1778
                              $RFQ
                              WEBSTER & BENNETT BORING BAR LOCKING PAD WB1778
                              This boring bar locking pad creates a powerful and efficient locking arrangement to secure boring bars to the turret with its serations. This part can be found on page 70/71 in the "DH" series manual. As well a
                              WEBSTER & BENNETT BORING BAR LOCKING PAD WB1778
                              $RFQ
                              WEBSTER & BENNETT BORING BAR LOCKING PAD WB1778
                              This boring bar locking pad creates a powerful and efficient locking arrangement to secure boring bars to the turret with its serations. This part can be found on page 70/71 in the "DH" series manual. As well a
                              WEBSTER & BENNETT BORING BAR LOCKING PAD WB1778
                              $RFQ
                              WEBSTER & BENNETT BORING BAR LOCKING PAD WB1778
                              This boring bar locking pad creates a powerful and efficient locking arrangement to secure boring bars to the turret with its serations. This part can be found on page 70/71 in the "DH" series manual. As well a
                              WEBSTER & BENNETT BORING BAR LOCKING SCREW WB1779
                              $RFQ
                              WEBSTER & BENNETT BORING BAR LOCKING SCREW WB1779
                              This boring bar locking screw creates a powerful and efficient locking arrangement to secure boring bars to the turret. This part can be found on page 70/71 in the "DH" series manual. As well as page 72/73 in t
                              WEBSTER & BENNETT BORING BAR LOCKING SCREW WB1779
                              $RFQ
                              WEBSTER & BENNETT BORING BAR LOCKING SCREW WB1779
                              This boring bar locking screw creates a powerful and efficient locking arrangement to secure boring bars to the turret. This part can be found on page 70/71 in the "DH" series manual. As well as page 72/73 in t
                              WEBSTER & BENNETT BORING BAR LOCKING SCREW WB1779
                              $RFQ
                              WEBSTER & BENNETT BORING BAR LOCKING SCREW WB1779
                              This boring bar locking screw creates a powerful and efficient locking arrangement to secure boring bars to the turret. This part can be found on page 70/71 in the "DH" series manual. As well as page 72/73 in t
                              WEBSTER & BENNETT BORING BAR LOCKING SCREW WB1779
                              $RFQ
                              WEBSTER & BENNETT BORING BAR LOCKING SCREW WB1779
                              This boring bar locking screw creates a powerful and efficient locking arrangement to secure boring bars to the turret. This part can be found on page 70/71 in the "DH" series manual. As well as page 72/73 in t
                              WEBSTER & BENNETT BORING BAR LOCKING SCREW WB1779
                              $RFQ
                              WEBSTER & BENNETT BORING BAR LOCKING SCREW WB1779
                              This boring bar locking screw creates a powerful and efficient locking arrangement to secure boring bars to the turret. This part can be found on page 70/71 in the "DH" series manual. As well as page 72/73 in t
                              WEBSTER & BENNETT BORING BAR LOCKING SCREW WB1779
                              $RFQ
                              WEBSTER & BENNETT BORING BAR LOCKING SCREW WB1779
                              This boring bar locking screw creates a powerful and efficient locking arrangement to secure boring bars to the turret. This part can be found on page 70/71 in the "DH" series manual. As well as page 72/73 in t
                              WEBSTER & BENNETT BORING BAR LOCKING SCREW WB1779
                              $RFQ
                              WEBSTER & BENNETT BORING BAR LOCKING SCREW WB1779
                              This boring bar locking screw creates a powerful and efficient locking arrangement to secure boring bars to the turret. This part can be found on page 70/71 in the "DH" series manual. As well as page 72/73 in t
                              1 1/2" x 12" GREENLEAF BORING BAR
                              $RFQ
                              1 1/2" x 12" GREENLEAF BORING BAR
                              1 11/16" Cutting diameter
                              WEBSTER & BENNETT BORING BAR WITH REMOVABLE KENLOC CUTTING HEAD
                              $RFQ
                              WEBSTER & BENNETT BORING BAR WITH REMOVABLE KENLOC CUTTING HEAD
                              Webster & Bennett boring bar with removable Kenloc cutting head. This fits all models of 36" Webster & Bennett machines.
                              16" x 2" KENNAMETAL S32-DCLNL4 BORING BAR
                              $RFQ
                              16" x 2" KENNAMETAL S32-DCLNL4 BORING BAR
                              16" x 2" KENNAMETAL S32-DCLNL4 BORING BAR
                              16 3/32" x 2" VALENITE 9T9 BHP-NV-500 LOC-A-DEX(R) BORING BAR
                              $RFQ
                              16 3/32" x 2" VALENITE 9T9 BHP-NV-500 LOC-A-DEX(R) BORING BAR
                              16 3/32" x 2" VALENITE 9T9 BHP-NV-500 LOC-A-DEX(R) BORING BAR
                              14 1/8" x 2 1/4" BORING BAR B 3618 J
                              $RFQ
                              14 1/8" x 2 1/4" BORING BAR B 3618 J
                              2 1/2" cutting diameter
                              Webster & Bennett Heavy Duty Flange Type Boring Bar
                              $RFQ
                              Webster & Bennett Heavy Duty Flange Type Boring Bar
                              WILL FIT 36" TURRET TYPE MACHINES MODELS "D" "DH" "EH" "M" "EM" "V" "EV"
                              2 3/8" x 13 3/4" Boring Bar
                              $RFQ
                              2 3/8" x 13 3/4" Boring Bar
                              Boring depth is 13 3/4" with a cutting diameter of 2 3/8"
                              Valenite 1 1/2" x 1 1/2" Indexable Tool Holders (Set of 4)
                              $RFQ
                              Valenite 1 1/2" x 1 1/2" Indexable Tool Holders (Set of 4)
                              Valenite 1 1/2" x 1 1/2" Indexable Tool Holders (Set of 4)
                              Dorian 1 1/2" x 1 1/2" Indexable Tool Holders (Set of 3)
                              $RFQ
                              Dorian 1 1/2" x 1 1/2" Indexable Tool Holders (Set of 3)
                              Dorian 1 1/2" x 1 1/2" Indexable Tool Holders (Set of 3)
                              Categories:
                              Condition:
                              Manufacturer:
                              Location:
                              Price:
                              •  to 
                              <Prev | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | 52 | Next>