buy & sell, new & used machinery, machine tools & equipment

Machine Tools

Machine Tools For Sale

15488 new & used machine tools items for sale
<Prev | 49 | 50 | 51 | 52 | 53 | 54 | 55 | 56 | 57 | 58 | Next>
Refine: Viewing 4901 - 5000 of 15488 matches
Sort by:
Items Per Page:  20 |  50 |  100
10,000 Lb X 14" SMF POWERED UNCOILER/PAYOFF (13970)
$RFQ
10,000 Lb X 14" SMF POWERED UNCOILER/PAYOFF (13970)
Max Width of Coil 14 One (1) Used 14" SMF Uncoiler MACHINE # 13970 Max. Coil Wi
6,000 Lb REGAL NON MOTORIZED UNCOILER/PAYOFF REEL (13969)
$RFQ
6,000 Lb REGAL NON MOTORIZED UNCOILER/PAYOFF REEL (13969)
Max Width of Coil 18 (Used) 6,000 Lb Regal Non Motorized Payoff/Uncoiler MACHINE #
6,500 Lb x 24" PA INDUSTRIES NON POWERED PAYOFF (13966)
$RFQ
6,500 Lb x 24" PA INDUSTRIES NON POWERED PAYOFF (13966)
Max Width of Coil 24 One 1 (Used) 6,500 Lb x 24" PA INDUSTRIES PAYOFF MACHINE # 1396
20,000 Lbs 60" OD CUSTOM COIL UPENDER (13945)
$RFQ
20,000 Lbs 60" OD CUSTOM COIL UPENDER (13945)
Max Weight of Coil 20000 20,000 Lbs, 60" OD Custom Coil UpenderMachine 13945Coil Platf
12 PASS WIRE DRAWING MACHINE (13934)
$RFQ
12 PASS WIRE DRAWING MACHINE (13934)
12 PASS WIRE DRAWING MACHINE MACHINE #13934 SPECIFICATIONS TRAVERSE WINDER: INSTALLED MOTOR: 2 KW VOTLAGE: 550 VOLTS PHASE: 3 DIMENSIONS: APPROXIMATELY 42"
4" X 14" X 20" RUESCH MODEL 265 4 HI REVERSING ROLLING MILL (13922)
$RFQ
4" X 14" X 20" RUESCH MODEL 265 4 HI REVERSING ROLLING MILL (13922)
Max Width Workpiece 18 inches Work Roll Dia.
STANDARD/FENN HYDRAULIC SWAGER FEED (13917)
$RFQ
STANDARD/FENN HYDRAULIC SWAGER FEED (13917)
FENN/STANDARD HYDRAULIC SWAGER FEED (13917) MACHINE 13917 MANUFACTURER: FENN/STANDARD MACHINERY (USA) TYPE: HEAVY DUTY HYDRAULIC FEED FOR TUBE OR BAR SIZE RANGE: WAS FEEDING 2-1/2" (63.5 MM) BUT CAN GO HIGHER
1" (25.4mm) x 2" (50.8mm) BUHLER 2 HIGH ROLLING MILL/WIRE FLATTENING MILL (13899
$RFQ
1" (25.4mm) x 2" (50.8mm) BUHLER 2 HIGH ROLLING MILL/WIRE FLATTENING MILL (13899
Max Width Workpiece 1 inches Max Roll Dia.
2" (50.8mm) FENN MODEL 2H HYDROFORMER, 15/16" (23.8mm) SOLIDS SWAGING MACHINE (1
$RFQ
2" (50.8mm) FENN MODEL 2H HYDROFORMER, 15/16" (23.8mm) SOLIDS SWAGING MACHINE (1
Capacity, Tubes 2 inches Capacity, Solids
8" X 0.060" LITTELL MODEL 308-9PDS 9 ROLL STRAIGHTENER (13885)
$RFQ
8" X 0.060" LITTELL MODEL 308-9PDS 9 ROLL STRAIGHTENER (13885)
(1) Used LITTEL MODEL 308-9PDS STRAIGHTENER (13885)MACHINE 13885SERIAL NUMBER&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&am
One used 16"(417mm)DIA x 19"(457mm)FACE I2S ONE WAY 2HI MILL W/ HYD. SCREWDOWNS.
$RFQ
One used 16"(417mm)DIA x 19"(457mm)FACE I2S ONE WAY 2HI MILL W/ HYD. SCREWDOWNS.
16" (419mm) DIA. x 18" (457mm) FACE I2S 2HI MILL W/ HYD. SCREWDOWNS, NEW 2002MACHINE 13873MANUFACTURER - INTEGRATED INDUSTRIAL SYSTEMS (I2S)YEAR - 2002STRIP RANGE - .250" - .063" (6.35mm - 1.60mm) STRIP WIDTH - 14.25" -
12,000 Ton LOEWY-HYDROPRESS WATER HYDRAULIC EXTRUSION PRESS (13867)
$RFQ
12,000 Ton LOEWY-HYDROPRESS WATER HYDRAULIC EXTRUSION PRESS (13867)
Tonnage 12000 tons 12,000 Ton LOEWY WATER HYDRAULIC EXTRSUION PRESS (13867) MACHINE
4 STAND TANDEM FENN/WATERBURY FARREL WIRE FLATTENING LINE (13838)
$RFQ
4 STAND TANDEM FENN/WATERBURY FARREL WIRE FLATTENING LINE (13838)
4 STAND TANDEM FENN/WATERBURY FARREL WIRE FLATTENING LINE (13838) MACHINE 13838 MANUFACTURER ...................... FENN MFG &amp; WATERBURY FARREL MFG NUMBER OF ROLL STANDS ............. 4 START &amp;
1-3/4" (44.45mm) STANDARD/FENN MODEL 3A 2 DIE ROTARY SWAGING MACHINE (13820)
$RFQ
1-3/4" (44.45mm) STANDARD/FENN MODEL 3A 2 DIE ROTARY SWAGING MACHINE (13820)
Capacity 1.750 inches Power 5 horsepower
50,000 LB 22 m/Ton VAUGHN SINGLE CHAIN 2 DIE ROD/BAR DRAW BENCH (13803)
$RFQ
50,000 LB 22 m/Ton VAUGHN SINGLE CHAIN 2 DIE ROD/BAR DRAW BENCH (13803)
50,000 LB. (22 M.T.) VAUGHN 2 DIE BAR/ROD DRAWBENCH (13803) MACHINE #13803 SPECIFICATIONS: MANUFACTURER ......... VAUGHN SERIAL ............... 61EC CAPACITY ............. 50,000 LBS. CONSTRUCTION ......... Sin
8 STAND OAKLEY R1 TUBE REDUCING MILL (13798)
$RFQ
8 STAND OAKLEY R1 TUBE REDUCING MILL (13798)
8 HEAD OAKLEY MODEL R1 TUBE REDUCING MILL (13798) MACHINE 13798 Manufacturer: S A Oakley Co, Chicago, IL USA Type Mill: Tube Reducing Model: R1 Serial:
EX-CELL-O TUBE REDUCING MILL 8 STAND (13797)
$RFQ
EX-CELL-O TUBE REDUCING MILL 8 STAND (13797)
EX-CELL-O TUBE REDUCING MILL 8 STAND (13797) MACHINE 13797 Manufacturer: Ex-Cell-O Model: 58-10101 Serial Number: 10012 Capacity: 0.437" to 0.3
20,000 Lb LOOPCO COIL CAR (13782)
$RFQ
20,000 Lb LOOPCO COIL CAR (13782)
Max Weight of Coil 20000 pounds Max Width of Coil
30,000 Lb PAXSON ABOVE GROUND COIL CAR (13781)
$RFQ
30,000 Lb PAXSON ABOVE GROUND COIL CAR (13781)
Max Weight of Coil 30000 pounds 30,000 Lb PAXSON ABOVE GROUND COIL CAR (13781) MAC
48" (1219mm) x .075" (2mm) HERR VOSS LEVELER (13779)
$RFQ
48" (1219mm) x .075" (2mm) HERR VOSS LEVELER (13779)
Max Width of Workpiece 48 inches Max Thickness of Workpiece
2" (48.4mm) - 3/4" (19mm) STEEL TUBE MILL WITH TURKSHEAD (13777)
$RFQ
2" (48.4mm) - 3/4" (19mm) STEEL TUBE MILL WITH TURKSHEAD (13777)
Tube Dia 2 inches Max. Wall Thickness 0.0
3 3/4" (95mm) - 1 " (25mm) STEEL TUBE MILL, NEW 2004 (13776)
$RFQ
3 3/4" (95mm) - 1 " (25mm) STEEL TUBE MILL, NEW 2004 (13776)
Tube Dia 1 inches Max. Wall Thickness 0.1
COMPLETE FORMING AND WELDING LINE FOR THE MANUFACTURE OF STEEL BEAMS (13774)
$RFQ
COMPLETE FORMING AND WELDING LINE FOR THE MANUFACTURE OF STEEL BEAMS (13774)
COMPLETE STEEL BEAM MANUFACTURING PLANT (13774) MACHINE# 13774 SPECIFICATIONS: FOR SALE: A COMPLETE FORMING AND WELDING LINE FOR THE MANUFACTURE OF STEEL BEAMS CAPABLE OF MAKING THE FOLLOWING PRODUCTS TO ASTM
ZR23-43 SENDZIMIR 20 HIGH REVERSING ROLLING MILL (13764)
$RFQ
ZR23-43 SENDZIMIR 20 HIGH REVERSING ROLLING MILL (13764)
40" (1020mm) SENDZIMIR ZR23-43 20-HI REVERSING MILL (13764) MACHINE #13764 SPECIFICATIONS: MANUFACTURER: SENDZIMIR, FRANCE YEAR: 1988-1989 MILL MODEL : ZR23-43 TYPE : SING STAND 20-HI COLD REVERSING INPUT
4,000 LB. x 12" LITTELL MODEL 40-12 UNCOILER (13737)
$RFQ
4,000 LB. x 12" LITTELL MODEL 40-12 UNCOILER (13737)
Max Weight of Coil 4000 pounds Max Width of Coil
1" (25.4MM) X 0.250" (6.35MM) MURDOCK SCRAP WINDER (13736)
$RFQ
1" (25.4MM) X 0.250" (6.35MM) MURDOCK SCRAP WINDER (13736)
CNC Control no Weight 7500 pounds
10,000 LB. x 36" EGAN SINGLE UNCOILER (13735)
$RFQ
10,000 LB. x 36" EGAN SINGLE UNCOILER (13735)
Max Weight of Coil 10000 pounds Max Width of Coil
10,000 LB. (4535 KG) x 36" (914mm) AMERICAN STEEL POWERED PAYOFF (13732)
$RFQ
10,000 LB. (4535 KG) x 36" (914mm) AMERICAN STEEL POWERED PAYOFF (13732)
Max Weight of Coil 10000 ounces Max Width of Coil
31" (787.4mm) ZR23-31 WATERBURY FARREL SENDZIMIR MILL (13727)
$RFQ
31" (787.4mm) ZR23-31 WATERBURY FARREL SENDZIMIR MILL (13727)
31" (787.4mm) ZR23-31 WATERBURY FARREL SENDZIMIR MILL (13727) MACHINE 13727 Manufacturer: Waterbury Farrel Company USA ZR23-31 Sendzimir 20HI Mill as loaded in containers as follow Strip Width: 370-740 mm Th
VAUGHN MODEL HIC WET TYPE WIRE DRAWER (13718)
$RFQ
VAUGHN MODEL HIC WET TYPE WIRE DRAWER (13718)
Max Wire Dia. 0.105 inches VAUGHN MODEL HIC WET TYPE WIRE DRAWER (13718) MACHINE 13718
6 1/2"(165mm) x 8" (203mm) FENN POWERED SCREWDOWNS 5 HP (13684)
$RFQ
6 1/2"(165mm) x 8" (203mm) FENN POWERED SCREWDOWNS 5 HP (13684)
MACHINE 13684 Fenn 2 HI Rolling Mill Line Consisting of: Durant Double-End Uncoiler: Model DDSC-1, SN:11122 10" wide stock width max 6" to 24" Coil I.D. Range Manual expansion 600 LB. Coil Weight Mechanic
3" (976.2mm) x 10.5" (267mm) x 10.5" (267mm) RUESCH 4 HIGH ROLLING MILL (13
$RFQ
3" (976.2mm) x 10.5" (267mm) x 10.5" (267mm) RUESCH 4 HIGH ROLLING MILL (13
MACHINE 13682 Manufacturer: Ruesch Machine Co. SERIAL #: N1722 - 5086 Type Rolling Mill: Ruesch 4 HI Rolling Mill Model: 210 Roll Face: 10.5" Work Roll Diameter:
16 Ton ANODE MELTING FURNACE (13665)
$RFQ
16 Ton ANODE MELTING FURNACE (13665)
No Description Provided
1250 Ton SCHLOEMANN EXTRUSION PRESS (13664)
$RFQ
1250 Ton SCHLOEMANN EXTRUSION PRESS (13664)
1250 Ton, SCHLOEMANN, 7" DIAMETER BILLETS EXT PRESS (13664)MACHINE 13664 Manufacturer: Schloemann, Germany Type Press: Aluminum &amp; Copper Extrusion Press Billet Diameter:
3-3/8" (85mm) X 1-3/8" (35mm) BUHLER SINGLE STAND WIRE FLATTENING MILL (13634)
$RFQ
3-3/8" (85mm) X 1-3/8" (35mm) BUHLER SINGLE STAND WIRE FLATTENING MILL (13634)
MACHINE #13634 MANUFACTURER: BUHLER &amp; CO GmbH General data Roll diameter: 85mm (3.350") Roll Width: 35mm (1.377") Screwdowns:
3"(76.2mm) 0 1.5"(38mm) MEDART No 3 BAR PEELER (13631)
$RFQ
3"(76.2mm) 0 1.5"(38mm) MEDART No 3 BAR PEELER (13631)
MACHINE 13631 MANUFACTURER: MEDART TYPE MACHINE: BAR PEELER MODEL: 3 CAPACITY: 3" (76.2mm) - 1.5" (38.1mm) ROUNDS **Temporary Specifications Sub
2-3/4" MCKEE Model FM-70 MHRF Triple Hit Tube End Former (13623)
$RFQ
2-3/4" MCKEE Model FM-70 MHRF Triple Hit Tube End Former (13623)
2-3/4" MCKEE Model FM-70 MHRF Triple Hit Tube End Former (13623) MACHINE 13623 2-3/4" MCKEE Model FM-70 MHRF Triple Hit Tube End Former Serial Number: 61818
20,000 Lb (9072 Kg) WEAN HYDRAULIC EXPANSION UNCOILER (13550)
$RFQ
20,000 Lb (9072 Kg) WEAN HYDRAULIC EXPANSION UNCOILER (13550)
MACHINE# 13550 SPECIFICATIONS: Manufacturer: Wean Materials: CRS, HRS, Alum., Pre-paint Max. Coil Weight: 20,000 Lb. (9072 Kg) Max. Coil Width: 36" (914mm) Min. Coil Width: 12" (305mm) Coil I.D.:
8 21/32"(220mm) X 16"(400mm) X 22 13/16"(580mm) RWF 6 HIGH CLUSTER MILL (13
$RFQ
8 21/32"(220mm) X 16"(400mm) X 22 13/16"(580mm) RWF 6 HIGH CLUSTER MILL (13
MACHINE #13522 RWF 6HI rolling mill Man : RWF Support rolls dia. 400 mm ( x 4 ) Working rolls dia. 220 mm ( x 2 )
6 5/16" (160mm) X 13"(330mm) X 20 7/8"(530mm) SCHMITZ 6 HI CLUSTER MILL (13
$RFQ
6 5/16" (160mm) X 13"(330mm) X 20 7/8"(530mm) SCHMITZ 6 HI CLUSTER MILL (13
MACHINE # 13521 SCHMITZ 6HI rolling mill Manufacturer: SCHMITZ Support rolls dia. 330mm (13") ( x 4 ) Working rolls dia. 160mm (6.3") ( x 2 ) Width working rolls : 530m
GENERAL ELECTRIC USIP 40 ULTRASONIC TESTER FOR TUBES (13494)
$RFQ
GENERAL ELECTRIC USIP 40 ULTRASONIC TESTER FOR TUBES (13494)
MACHINE# 13494 SPECIFICATIONS: Manufacturer: QCS Co. Ltd. under license from General Electric Corporation Model No.: G.E. USIP 40 Tube O.D. Range: 15.88mm (0.625") to 50mm (2") Tube Length: Up to 30m (100
75 Ton DANLY MODEL 75 OBI PRESS W/AIR CLUTCH (13491)
$RFQ
75 Ton DANLY MODEL 75 OBI PRESS W/AIR CLUTCH (13491)
MACHINE# 13491 SPECIFICATIONS: Manufacturer: Danly Machine Corporation Type: O.B.I. PRESS Model No.: 75 Serial No.: 75-5976-05-76 Year of Manufacture: 1976 EQUIPPED WITH: Danly Air Clutch Air Counterbalance To Slide V
TORRINGTON SWAGER RACK & PINION FEED (13478)
$RFQ
TORRINGTON SWAGER RACK & PINION FEED (13478)
MACHINE #13478 SPECIFICATIONS -TYPE: RACK AND PINION SWAGER FEED -CAPACITY: APPROXIMATELY 1 1/2" DIAMETER -STROKE: APPROXIMATELY 18" -MAXIMUM WORK PIECE L
16"(405mm) DRIVE CAPSTAN WHITACRE 3 STATION DOWNCOILER WIRE TAKE-UP (13443)
$RFQ
16"(405mm) DRIVE CAPSTAN WHITACRE 3 STATION DOWNCOILER WIRE TAKE-UP (13443)
MACHINE# 13443 SPECIFICATIONS: Manufacturer: Whitacre Machine Corp. (USA) Type: Vertical Downlayer No. of Take-Up Stations: 3 (Independently Driven but mounted on a common base). E
5"(127mm) X 17"(430mm) X 15 3/4"(400mm) SCHMITZ 4 HI REVERSING (13434)
$RFQ
5"(127mm) X 17"(430mm) X 15 3/4"(400mm) SCHMITZ 4 HI REVERSING (13434)
MACHINE# 13434 SPECIFICATIONS: Manufacturer: SCHMITZ, Germany Type: 4-Hi reversing Cold rolling mill with Hydraulic AGC and DC motors. Work roll dia: 150-123 mm (4.8"- 5.9") Backup roll dia: 450-431 mm (17.7"- 17") Ma
1"(25mm) - 2.5"(65mm) GUARIENTI DOUBLE HEADED CHAMFERING & CUTTING (13392)
$RFQ
1"(25mm) - 2.5"(65mm) GUARIENTI DOUBLE HEADED CHAMFERING & CUTTING (13392)
MACHINE# 13392 SPECIFICATIONS: Manufacturer: GUARIENTI OFFICINA MECCANICA S.r.l. (Italy) Model: SB-4 Year: 2000 Range: - Rounds: 25mm - 65mm (1" - 2 1/2") - Hexagons: 17mm - 40mm (0.7"" - 1.57") Sawing he
22" (558mm) X 33" (838mm) 2 HI TEMPER PASS MILL (13353)
$RFQ
22" (558mm) X 33" (838mm) 2 HI TEMPER PASS MILL (13353)
22" (558mm) x 33" (838mm) 2-HI TEMPER PASS MILL (13353) MACHINE# 13353 1. TECHNICAL SPECIFICATIONS: NEW PLC SYSTEM NEW THYRISTOR POWER CONTROL UNIT FOR PAY OFF REEL DC MOTOR NEW THYRISTOR POWER CONTROL UNIT FO
13-1/2" THERMAL BASICS STRIP ANNEALING FURNACE (13337)
$RFQ
13-1/2" THERMAL BASICS STRIP ANNEALING FURNACE (13337)
MACHINE 13337 13-1/4" THERMAL BASICS COPPER AND BRASS STRIP ANNEALING LINE MANUFACTURER - THERMAL BASICS STRIP WIDTH - 1" - 13 1/4" COIL WEIGHT - 4,000 LBS. COIL ID/OD - 16/42 STRIP THICKNESS RANGE - .005"-.125" SPEE
52"(1321mm) DMS ZR22-BBS-52 SENDZIMIR ROLLING MILL (13334)
$RFQ
52"(1321mm) DMS ZR22-BBS-52 SENDZIMIR ROLLING MILL (13334)
MACHINE# 13314 SPECIFICATIONS: Manufacture: DMS (France) Year of Manufacture: 1992 Model: ZR22-BBS-52 Design: 20-High Z-Mill/Sendzimir Reversing Mill Material: High Carbon / Low carbon / Stainless Steel Material Trave
2 1/2" (63.5mm) x 8" (203mm) x 10" (254mm) RUESCH, REVERSING (13332)
$RFQ
2 1/2" (63.5mm) x 8" (203mm) x 10" (254mm) RUESCH, REVERSING (13332)
2 1/2" (63.5mm) x 8" (203mm) x 10" (254mm) RUESCH, REVERSING (13332) MACHINE 13332 MANUFACTURER: H J RUESCH COMPANY, USA Type - 4HI Reversing Cold Mill Screwdowns - Electro Mechanical Adjustment Width R
40 TON X 50 FT WEAN HYDRAULIC EXTRUSION STRETCHER (13326)
$RFQ
40 TON X 50 FT WEAN HYDRAULIC EXTRUSION STRETCHER (13326)
MACHINE 13326 MANUFACTURER: WEAN MACHINE CO CAPACITY: 40 TONS X 50 FT (15,24 METERS) TYPE MACHINE: HYDRAULIC EXTRUSION STRETCHER **Temporary Specifications Subject
1 1/2" (38mm) ABBEY ETNA No. 158 ROTARY SWAGER (13213)
$RFQ
1 1/2" (38mm) ABBEY ETNA No. 158 ROTARY SWAGER (13213)
MACHINE# 13213 SPECIFICATIONS: MANUFACTURER: ABBEY ETNA MODEL No.: 158 SERIAL No.: 1694 1-1/2" (38mm) TUBE CAPACITY 3/4" (19mm) SOLID CAPACITY 8" (203mm) DIE LENGTH 2-1/2" (63
12" (305mm) X 12" (305mm) HEM 1000AH HORIZONTAL BAND SAW (13210)
$RFQ
12" (305mm) X 12" (305mm) HEM 1000AH HORIZONTAL BAND SAW (13210)
MACHINE# 13210 SPECIFICATIONS: MANUFACTURER: HEM INC. (U.S.A.) MODEL No.: 1000AH SERIAL No.: 235085 MAXIMUM WORKPIECE AS DESIGNED: 12 3/4" (324mm) ROUND 12 3/4" (
LEWIS AUTOMATED ULTRASONIC PARTS WASHING LINE FOR MEATLAWORKING PARTS (13199)
$RFQ
LEWIS AUTOMATED ULTRASONIC PARTS WASHING LINE FOR MEATLAWORKING PARTS (13199)
MACHINE# 13199 MANUFACTURER: LEWIS CORPORATION (U.S.A.) TYPE: AUTOMATED WATER BASED ULTRASONIC CLEANING SYSTEM FOR METALWORKING PARTS IN SPECIAL TRANSPORTABLE BASKETS. THE LINE CONSISTS OF: - HEATED SOAK TANK - HEA
22" X 40" LEWIS 2 HI NON REVERESING 200 HP, 600 FPM (13185)
$RFQ
22" X 40" LEWIS 2 HI NON REVERESING 200 HP, 600 FPM (13185)
MACHINE 13185 22" x 40" Non-Reversing Cold Mill Type Mill: 2 High Non Reversing Rolling Mill Coil Weight: 30,000 lbs. Mill Speed: 309 to 618 FPM Post Size:
25" X 42" WATERBURY FARREL 2 HI NON REVERSING MILL (13129)
$RFQ
25" X 42" WATERBURY FARREL 2 HI NON REVERSING MILL (13129)
MACHINE # 13129 MANUFACTURER: WATERBURY FARREL SPECIFICATIONS MILL SECTION: 2 HI MILL TYPE: NON REVERSING MATERIAL: STAINLESS STEEL, CARBON STEEL STRIP WIDTH DATA MAXIMUM: 37IN/939.802MM MINIMUM: 14IN/355.601MM ENTR
1 1/16" MITCHELL HYDRA-PUSH 2 DIE HYD COILED ROD PUSH POINTER (13114)
$RFQ
1 1/16" MITCHELL HYDRA-PUSH 2 DIE HYD COILED ROD PUSH POINTER (13114)
MACHINE# 13114 Originally built for Nelson Steel &amp; Wire. It was used to point coiled rod coming off of a horizontal payoff going to a vertical bullblock. Pointer slides into alignment between payoff and drawer
VANGROENWEGHE TURBO GRINDER TYPE T-300-2K BELT GRINDING MACHINE (13095)
$RFQ
VANGROENWEGHE TURBO GRINDER TYPE T-300-2K BELT GRINDING MACHINE (13095)
VANGROENWEGHE TURBOGRINDER TYPE T-300-2K BELT GRINDING MACHINE (13095) &nbsp; Our stock number: 13095
CUSTOM HYDRAULIC STRAIGHTENER (13093)
$RFQ
CUSTOM HYDRAULIC STRAIGHTENER (13093)
MACHINE# 13093 SIZE RANGE - OPENING ALLOWS FOR 2-3/4" HIGH x 10" WIDE PIECE TABLE LENGTH - 12' HYDRAULIC HOLDDOWN - YES VERTICAL PRESSURE DIES - 4 **PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE** **ALL SPEC
ZR 19-25, 12 HI Sendzimir Reversing Cold Rolling Mill, Stainless Steel (13051)
$RFQ
ZR 19-25, 12 HI Sendzimir Reversing Cold Rolling Mill, Stainless Steel (13051)
ZR 19-25 Sendzimir 12 High Rolling Mill (13051)MACHINE# 13051 SPECIFICATIONS: This Sendzimir Mill ZR 19-25 12-HI Rolling Mill for stainless steel is now in storage. The Mill is for the most part complete. Some compone
HERR VOSS 17 ROLL LEVELER (12987)
$RFQ
HERR VOSS 17 ROLL LEVELER (12987)
No Description Provided
2,500 lb LITTELL No. 25 NON DRIVEN COIL PAYOFF (12950)
$RFQ
2,500 lb LITTELL No. 25 NON DRIVEN COIL PAYOFF (12950)
MACHINE# 12950 SPECIFICATIONS: MANUFACTURER: F.J. LITTELL MACHINE CO. (U.S.A.) TYPE: NON-DRIVEN COIL PAYOFF MODEL No.: 25 I.D. EXPANSION: 15 1/2"
6" X 3 1/2" TISHKEN STR-30-002-HWA EDGE, STR & CUT (12688)
$RFQ
6" X 3 1/2" TISHKEN STR-30-002-HWA EDGE, STR & CUT (12688)
MACHINE # 12688 MANUFACTURER:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&n
6" x 4" TISHKEN 2 STAND MODEL ST2-C02 EDGE STR & CUT (12686)
$RFQ
6" x 4" TISHKEN 2 STAND MODEL ST2-C02 EDGE STR & CUT (12686)
MACHINE # 12686 MANUFACTURER:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; TISHKEN PRODUCTS CO MODEL:&nbsp;&a
59" X 98" CEBA BELL FURNACE (12678)
$RFQ
59" X 98" CEBA BELL FURNACE (12678)
MACHINE# 12678 SPECIFICATIONS: Manufacturer: CEBA Type: Electric Bell annealing furnace Material Used: Hot and Cold Rolled Low and High Carbon Steel 1 Heating hood (N2) 2 Bases 2 Inner covers 1 Cooling ho
10" X 0.125" IRON BAY MODEL MP-22 COIL END JOINER (12639)
$RFQ
10" X 0.125" IRON BAY MODEL MP-22 COIL END JOINER (12639)
MACHINE #12639 CAPACITY: 10" WIDE x .125" THICK (SHEAR ON PORTABLE CART CAPACITY) EQUIPPED WITH: - TORCH TRAVEL VIA ELECTRIC MOTOR - TIGTORCH CONTROLS - GAS PRESSURE GAUGES - MANUAL CLAMPING - AIR OPERATED WITH SHEAR
7", MODERN, No. 6K, 1977, Tube Cutoff, 3/4"-7" OD x 1-1/2" Wall (12607
$RFQ
7", MODERN, No. 6K, 1977, Tube Cutoff, 3/4"-7" OD x 1-1/2" Wall (12607
MACHINE# 12607 SPECIFICATIONS: Capacity: ........................................... 3/4" - 7" O.D. Maximum Wall Thickness: ..................................... 1-1/2" Maximum Solid Bar Diameter: .....................
4000 Lb., LITTELL, No. 40-24, 15-20" ID, 24" wide, 60" OD (12568)
$RFQ
4000 Lb., LITTELL, No. 40-24, 15-20" ID, 24" wide, 60" OD (12568)
MACHINE # 12568 4,000# Littell Reel Model #40-24 Serial #92079-95-4 Age 1995 15" - 20" I.D. 60" O.D. 24" Wide Motorized Sliding centering base Full backing plate 2 Keepers **PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR
8" x 6", FENN, TWO STAND TANDEM 8,8 WITH TRAVERSE WINDER (12515)
$RFQ
8" x 6", FENN, TWO STAND TANDEM 8,8 WITH TRAVERSE WINDER (12515)
Machine # 12515MANUFACTURER:..................FENN MANUFACTRUING CO. USATYPE MILL:.....................2 STAND TANDEM WIRE FLATTENING LINE1ST STANDSERIAL NUMBER:.................269ROLL SIZE:.....................8" (203.
8" x 6", FENN, 3 STAND TANDEM 8,6,6, TRAVERSE TAKE UP (12514)
$RFQ
8" x 6", FENN, 3 STAND TANDEM 8,6,6, TRAVERSE TAKE UP (12514)
Machine # 12514 MANUFACTURER:................FENN MANUFACTURING, USA TYPE MACHINE:................3 STAND TANDEM WIRE FLATTENING LINE UNCOILER:....................LITTEL 2500 lbs UNCOILER:....................FENN ST
11" x 4 1/2", TISHKEN, No. STR-FLS-2, WIRE FLATTEN, STR & CUT-OFF LINE (1245
$RFQ
11" x 4 1/2", TISHKEN, No. STR-FLS-2, WIRE FLATTEN, STR & CUT-OFF LINE (1245
MACHINE# 12450 GENERAL SPECIFICATIONS: MANUFACTURER: TISHKEN MANUFACTURING MODEL: STR-FLS-2 TYPE MILL: 2 STAND TANDEM WIRE FLATTENING, STRAIGHTENING AND CUT-OFF LINE CAP
MODEL 3P, FENN PLAIN TYPE HIGH SPEED TURKSHEAD (12418)
$RFQ
MODEL 3P, FENN PLAIN TYPE HIGH SPEED TURKSHEAD (12418)
MACHINE #12328 SPECIFICATIONS -MANUFACTURER: FENN MANUFACTURING CO. -MODEL: 3P -TYPE: HIGH SPEED PLAIN TYPE -MAXIMUM ROLL OPENING: 1/2" X 1 1/8" (12.7mm
12" x 8", STRILICH, 3 STAND TANDEM, 15 HP PER STAND (12413)
$RFQ
12" x 8", STRILICH, 3 STAND TANDEM, 15 HP PER STAND (12413)
MACHINE # 12413 MANUFACTURER:...................STRILICH TECHNOLOGIES INC MODEL:......................... 380 TYPE MILL:..................... 3 STAND TANDEM COLD REDUCING ROLLING MILL ROLL SIZE:.....................
1000 LB, STANAT TRAVERSING TAKE UP REEL
$RFQ
1000 LB, STANAT TRAVERSING TAKE UP REEL
MACHINE #12334SPECIFICATIONS -MANUFACTURER: STANAT -TYPE: TRAVERSIING TAKE UP REEL -CAPACITY: APPROXIMATELY 1,000 LBS (454.5Kg) -SPEED: VARIABLE UP T
MODEL 3P, FENN PLAIN TYPE HIGH SPEED TURKSHEAD (12324)
$RFQ
MODEL 3P, FENN PLAIN TYPE HIGH SPEED TURKSHEAD (12324)
MACHINE #12324 SPECIFICATIONS -MANUFACTURER: FENN MANUFACTURING CO. -MODEL: 3P -TYPE: HIGH SPEED PLAIN TYPE -CAPACITY: FENN DOES NOT LIST A
7/8", TORRINGTON MODEL 312, 2 DIE ROTARY SWAGER, 3/8" SOLIDS, W/C HEAD (12206)
$RFQ
7/8", TORRINGTON MODEL 312, 2 DIE ROTARY SWAGER, 3/8" SOLIDS, W/C HEAD (12206)
MACHINE #12206-SPECIFICATIONS-MANUFACTURER: THE TORRINGTON COMPANY-MODEL: 312-TYPE: 2 DIE ROTARY-CAPACITY-SOLIDS: 3/8" (9.5mm)-TUBING: 7/8" (22.2mm)-DIE SIZE-WIDTH: 1.187" (30.1mm)-LENGTH: 2.500" (63.5mm)-HEIGHT: 1.175"
7/8", TORRINGTON MODEL 312, 2 DIE ROTARY SWAGER, 3/8" SOLIDS, W/C HEAD (12202)
$RFQ
7/8", TORRINGTON MODEL 312, 2 DIE ROTARY SWAGER, 3/8" SOLIDS, W/C HEAD (12202)
MACHINE #12202-SPECIFICATIONS-MANUFACTURER: THE TORRINGTON COMPANY-MODEL: 312-TYPE: 2 DIE ROTARY-CAPACITY-SOLIDS: 3/8" (9.5mm)-TUBING: 7/8" (22.2mm)-DIE SIZE-WIDTH: 1.187" (30.1mm)-LENGTH: 2.500" (63.5mm)-HEIGHT: 1.175"
7/8", TORRINGTON MODEL 312, 2 DIE ROTARY SWAGER, 3/8" SOLIDS, W/C HEAD (12198)
$RFQ
7/8", TORRINGTON MODEL 312, 2 DIE ROTARY SWAGER, 3/8" SOLIDS, W/C HEAD (12198)
MACHINE #12198-SPECIFICATIONS-MANUFACTURER: THE TORRINGTON COMPANY-MODEL: 312-TYPE: 2 DIE ROTARY-CAPACITY-SOLIDS: 3/8" (9.5mm)-TUBING: 7/8" (22.2mm)-DIE SIZE-WIDTH: 1.187" (30.1mm)-LENGTH: 2.500" (63.5mm)-HEIGHT: 1.175"
7" (178mm) x 7/8" (22mm) KOHLER 19 ROLL LIGHT GAUGE STRIP LEVELER (12173)
$RFQ
7" (178mm) x 7/8" (22mm) KOHLER 19 ROLL LIGHT GAUGE STRIP LEVELER (12173)
MACHINE# 12173SPECIFICATIONS:MANUFACTURER: KOHLER A.S.TYPE: 19 ROLL BACKED UP LEVELERNo. OF ROLLS: 19No. OF DRIVEN ROLLS: 19ROLL CONFIGURAT
1 1/4" (31.75mm) Max., MITCHELL, SINGLE DIE, HYDRAULIC TUBE PUSH POINTER [12155]
$RFQ
1 1/4" (31.75mm) Max., MITCHELL, SINGLE DIE, HYDRAULIC TUBE PUSH POINTER [12155]
MACHINE# 12155SPECIFICATIONS:MANUFACTURER ............... GEORGE MITCHELL CO. (U.S.A.)TYPE ....................... HYDRAULIC PUSH POINTER FOR TUBE SINGLE DIE MODELRATED PUSH FORCE ...........
1 1/4" (31.75mm) Max., MITCHELL, 2-DIE, HYDRAULIC TUBE PUSH POINTER (12154)
$RFQ
1 1/4" (31.75mm) Max., MITCHELL, 2-DIE, HYDRAULIC TUBE PUSH POINTER (12154)
MACHINE# 12154SPECIFICATIONS:MANUFACTURER ............... GEORGE MITCHELL CO. (U.S.A.)TYPE ....................... HYDRAULIC PUSH POINTER FOR TUBE TWO DIE MODELRATED PUSH FORCE ........... 20,
7" (178mm) x 7/8" (22mm) BRUDERER19 ROLL BACKED UP LEVELER (12018)
$RFQ
7" (178mm) x 7/8" (22mm) BRUDERER19 ROLL BACKED UP LEVELER (12018)
MACHINE# 12018SPECIFICATIONS:MANUFACTURER: BRUDERER A.S. (SWITZERLAND)TYPE: 19 ROLL BACKED UP LEVELERMODEL No.: 24180BSERIAL No.:
10" x 2", FENN 2 HI WIRE FLATTENING MILL, 75 HP DC, CARBIDE SHELL ROLLS (12009)
$RFQ
10" x 2", FENN 2 HI WIRE FLATTENING MILL, 75 HP DC, CARBIDE SHELL ROLLS (12009)
10" (204mm) x 2 1/2" (63mm) FENN 2-HI WIRE FLATTENING MILL (12009) MACHINE #12009 SPECIFICATIONS -MANUFACTURER: FENN MANUFACTURING COMPANY (USA) -TYPE: 2 HI WIRE FLATTENING RO
5 1/2" x 6", MARSHALL RICHARDS, 10 HP DC, WINDERS (11983)
$RFQ
5 1/2" x 6", MARSHALL RICHARDS, 10 HP DC, WINDERS (11983)
MACHINE # 11983 MANUFACTURER: Marshall Richards SERIAL NUMBER: 661846 SPECIFICATIONS: Roll diameter: 5-1/4" ( 135mm) Roll Width: 6" (150mm) Rolling Speed : 0 to 65 ft/min (0 to 20 m/min) Srewdown: Man
TF111B, HERBORN, .040" HI CARBON FINE WIRE DRAWER (11859)
$RFQ
TF111B, HERBORN, .040" HI CARBON FINE WIRE DRAWER (11859)
MACHINE #11859 HERBORN #TF111B FINE WIRE DRAWING MACHINE Serial Number: 19.5-30859 19 DIE 4 CONE BLOCKS, 2 x 4 AND 2 x 5 STEPS INBUILT DRAFTING ................. 17
TF111C/13, HERBORN, 0.040" HI CARBON 13 DIE (11858)
$RFQ
TF111C/13, HERBORN, 0.040" HI CARBON 13 DIE (11858)
MACHINE #11858 HERBORN #TF111C/13 FINE DRAWING MACHINE Serial Number: 57/30312-1/2 13 DIE 2 ALUMINUM OXIDE CERAMIC CONE BLOCKS 6 STEPS EACH. HORIZONTAL COILER BLOCK C
TF111C/13, HERBORN, 0.040" HI CARBON 13 DIE (11857)
$RFQ
TF111C/13, HERBORN, 0.040" HI CARBON 13 DIE (11857)
MACHINE # 11857 HERBORN #TF111C/13 FINE DRAWING MACHINE Serial Number: 57/3032-9/6 13 DIE 2 ALUMINUM OXIDE CERAMIC CONE BLOCKS 6 STEPS EACH. HORIZONTAL COILER BLOCK
3" (76mm) x .135" (3.5mm), URRUTIA, 2-1/2, TUBE MILL (NO WELDER/SHEAR) (11829)
$RFQ
3" (76mm) x .135" (3.5mm), URRUTIA, 2-1/2, TUBE MILL (NO WELDER/SHEAR) (11829)
MACHINE# 11829 SPECIFICATIONS: manufacturer: URRUTIA Model Number: 2-1/2 Year of Manufacture: 1970 NOTE: TUBE MILL ONLY, NO WELDER OR CUT-OFF. Direction of Line:
MODEL 5U, FENN UNIVERSAL TYPE TURKSHEAD, .437" MAX SQUARE (11674)
$RFQ
MODEL 5U, FENN UNIVERSAL TYPE TURKSHEAD, .437" MAX SQUARE (11674)
MACHINE 11674 SPECIFICATIONS MANUFACTURER: FENN MODEL: 5U TYPE TURKS HEAD: UNIVERSAL TYPE STANDARD SPEED CAPACITY -MAXIMUM SQUARE: .437" (11.1mm) -MAXIMUM
MITCHELL MODEL 536 HYD VARIABLE WALL TUBE FORMING MACHINE (11395)
$RFQ
MITCHELL MODEL 536 HYD VARIABLE WALL TUBE FORMING MACHINE (11395)
MACHINE 11395 SPECIFICATIONS -MANUFACTURER: GEORGE A MITCHELL COMPANY -MODEL: 536 -TYPE: HYDRAULIC VARIABLE WALL TUBE FORMING MACHINE -CAPACITY -PREVIOUS USE:
2,500 Lb., COOPER WEYMOUTH, DOUBLE ARM UNCOILER (11387)
$RFQ
2,500 Lb., COOPER WEYMOUTH, DOUBLE ARM UNCOILER (11387)
MACHINE# 11387SPECIFICATIONS:MANUFACTURER: COOPER WEYMOUTH CORP. (U.S.A.)TYPE: TWIN ARM NON-DRIVEN PAYOFFMODEL No.: 2500/12DPSERIAL No.: 2500/12DP-
MODEL 4P, FENN PLAIN TYPE, STANDARD SPEED, FRICTION TURKSHEAD (11356)
$RFQ
MODEL 4P, FENN PLAIN TYPE, STANDARD SPEED, FRICTION TURKSHEAD (11356)
MACHINE #11356 SPECIFICATIONS MANUFACTURER: FENN MANUFACTURING CO MODEL: 4P TYPE: STANDARD SPEED TURKSHEAD MAX ROLL OPENING: 3/4" X 1 3/4" (19m
WATERBURY FARREL, No. AV-40, 1970, POWER DRIVEN, UNCOILER (11286)
$RFQ
WATERBURY FARREL, No. AV-40, 1970, POWER DRIVEN, UNCOILER (11286)
MACHINE# 11286 SPECIFICATIONS: MANUFACTURER: WATERBURY FARREL MODEL No.: AV-40 TYPE: POWER DRIVEN UNCOILER SERIAL No.: 224534-56G YEAR BUILT: 1970
2", MITCHELL, 12,500 LB., 1982, HYDRAULIC PUSH POINTER (11228)
$RFQ
2", MITCHELL, 12,500 LB., 1982, HYDRAULIC PUSH POINTER (11228)
2", MITCHELL, 12,500 LB., 1982, HYDRAULIC PUSH POINTER (11228)MACHINE #11228SPECIFICATIONS:MANUFACTURER: GEORGE A MITCHELL COTYPE: IN-LINE HYDRAULIC PUSH POINTERYEAR OF MANUFACTURE: 1982SERIAL No.: 378MAXIMUM TUBE O.D.:
1 1/4", TORRINGTON, No. 4, SWAGER (11065)
$RFQ
1 1/4", TORRINGTON, No. 4, SWAGER (11065)
MACHINE# 11065SPECIFICATIONS:MANUFACTURER: TORRINGTONMODEL: 6 CAPACITY: 1 1/4" (31.8mm)LONGEST TAPER POSSIBLE: 6" (152.4mm)DIE SIZE: -WIDTH
1 3/4" TORRINGTON MODEL 434DC DIE CLOSING 2 DIE SWAGER, 5/8" SOLID CAPACITY (107
$RFQ
1 3/4" TORRINGTON MODEL 434DC DIE CLOSING 2 DIE SWAGER, 5/8" SOLID CAPACITY (107
Capacity, Tubes 1.75 inches Capacity, Solids
60" (1525mm) DEMAG SMS VERTICAL TUBE SPINNER BLOCK, 300 HP (10717)
$RFQ
60" (1525mm) DEMAG SMS VERTICAL TUBE SPINNER BLOCK, 300 HP (10717)
MACHINE # 10717 SPECIFICATIONS: - MANUFACTURER: DEMAG SMS G.m.b.H. (GERMANY) YEAR OF MANUFACTURE - 2000 - 60" (1524mm) BLOCK DIAMETER - 1.125" (6.35mm) O.D. x 0.070" (1.8mm) WALL MAX TUBE CAPACITY - 450 LB (205 KG)
5" x 10" x 10", STANAT, 4 HI, ROLLING MILL 25 HP DC, POWER SCREWDOWNS (1064
$RFQ
5" x 10" x 10", STANAT, 4 HI, ROLLING MILL 25 HP DC, POWER SCREWDOWNS (1064
MAX ROLL WIDTH 10 inches 5" x 10" x 10" STANAT 4-HI BONDING ROLLING MILL (10647)Machine
2000 Lb., PROGRESSIVE, No. 620SM-RH,TRAVERSE TAKE UP (10579)
$RFQ
2000 Lb., PROGRESSIVE, No. 620SM-RH,TRAVERSE TAKE UP (10579)
MACHINE # 10579MANUFACTURER: PROGRESSIVE MACHINE CO. INC. PATERSON, NEW JERSEYMODEL: 620-SM-RHSERIAL NUMBER: 17060620SPOOLER MACHINE No.:
12" VAUGHN MODEL 8SD VERTICAL WIRE DRAWING BULL BLOCK, 10/13 HP (10536)
$RFQ
12" VAUGHN MODEL 8SD VERTICAL WIRE DRAWING BULL BLOCK, 10/13 HP (10536)
MACHINE #10536 SPECIFICATIONS: -MANUFACTURER: VAUGHN -MODEL: 8 SD MOTOBLOC -TYPE: VERTICAL BULL BLOCK -BLOCK SIZE -DIAMETER 12" (305mm) -DRIVE
Categories:
Condition:
Manufacturer:
Location:
Price:
  •  to 
<Prev | 49 | 50 | 51 | 52 | 53 | 54 | 55 | 56 | 57 | 58 | Next>