buy & sell, new & used machinery, machine tools & equipment

Machine Tools

Machine Tools For Sale

15500 new & used machine tools items for sale
<Prev | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | Next>
Refine: Viewing 1201 - 1300 of 15500 matches
Sort by:
Items Per Page:  20 |  50 |  100
KOIKE-ARONSON PLASMA ARC CUTTING SYSTEM WITH TABLE 10'CAPACITY
$RFQ
KOIKE-ARONSON PLASMA ARC CUTTING SYSTEM WITH TABLE 10'CAPACITY
NEW 2004 CAPACITY 3100MM (122") ORDER # S0178105 HYPERTHERM HYSPEED HT2000 POWER SUPPLY
GASBARRE 2150 F ELECTRIC ATMOSPHERE BOX FURNACE 28"W 48"L 28"
$RFQ
GASBARRE 2150 F ELECTRIC ATMOSPHERE BOX FURNACE 28"W 48"L 28"
DIGITAL CONTROLS ELECTRICALLY HEATED ATMOSPHERE (HYDROGEN & NITROGEN) RETORT BOX FURNACE WITH SIDE SWING DOOR (WATER COOLED DOOR FLANGE). INTERIOR HAS AN ALLOY RETO
  • Chamber width: 28"
  • Chamber length: 48"
    ABBOTT 2100 F ATMOSPHERE 12"WIDE BELT FURNACE
    $RFQ
    ABBOTT 2100 F ATMOSPHERE 12"WIDE BELT FURNACE
    DIGITAL CONTROLS 12"WIDE ATMOSPHERE BELT FURNACE WITH ALLOY RETORT CURRENTLY USING A 10"WIDE BELT. PARTS ARE LOADED ON THE VARIABLE SPEED MESH BELT AT 6'LONG ENTRANCE TABLE, PASS THROUGH 3' ENTRANCE P
    • Chamber width: 12"
    • Chamber length: 216"
      STEELMAN GAS FIRED BURN OFF OVEN 6'W 3'L 3'H
      $RFQ
      STEELMAN GAS FIRED BURN OFF OVEN 6'W 3'L 3'H
      DIGITAL CONTROLS DOUBLE DOOR OPENING WITH POSITIVE LATCHING. PRIMARY HEAT CHAMBER AND AFTER BURNER CHAMBER ARE MOUNTED ON REAR WALL WITH HEAT (351,000 BTU/HR MAX. TOTAL) SUPPLIED BY TWO PACKAGE BURNERS. HEAT FLOW IS &q
      LUCIFER 1450 F TWO CHAMBER ELECTRIC FURNACE
      $RFQ
      LUCIFER 1450 F TWO CHAMBER ELECTRIC FURNACE
      DIGITAL CONTROLS (2) CHAMBER BOX FURNACE WITH SIDE SWING DOORS AND REAR MOUNTED AIR CIRCULATING FANS. THE TOP CHAMBER IS 18"LONG . BOTTOM CHAMBER IS 48"L
      • Chamber width: 18"
      • Chamber length: 48"
        Giddings & Lewis VTC-1600 63" CNC Vertical Boring Mill
        $RFQ
        Giddings & Lewis VTC-1600 63" CNC Vertical Boring Mill
        Reference #43312 Giddings & Lewis VTC-1600 63" CNC Vertical Boring Mill FEATURES: Fanuc 160i-TB CNC Control 26-Station Automatic Tool Change 6-Wedge Lock & 20 Kennametal KM80 Station Misc. Tooling
        • Swing: 78.74"
          Makino A-92 CNC Horizontal Machining Center
          $RFQ
          Makino A-92 CNC Horizontal Machining Center
          Reference #43243 Makino A-92 CNC Horizontal Machining Center Features: Makino Pro 5 (Fanuc) Control Full B-Axis Contouring (2) 39” x 32” Pallet Size Specification: X-Axis ................................ 59
          • X axis: 59.8"
          • Y axis: 49.2"
            (2) 90.875" x 25.75" T-Slotted Angle Plates / Machining Tables w/
            $RFQ
            (2) 90.875" x 25.75" T-Slotted Angle Plates / Machining Tables w/
            Reference #43181 (2) 90.875" x 25.75" T-Slotted Angle Plates / Machining Tables w/ Fixture Surface Plates FEATURES: Drilled and Tapped Surface Fixture Plates T-Slots Cast Iron Construction SPECIFIC
            Blanchard 22D-42 42" Vertical Spindle Rotary Surface Grinder
            $RFQ
            Blanchard 22D-42 42" Vertical Spindle Rotary Surface Grinder
            Reference #43174 Blanchard 22D-42 42" Vertical Spindle Rotary Surface Grinder FEATURES: 42" Magnetic Chuck Neutrofier II Magnetic Chuck Control 48" Swing Inside Guards 50 HP Main Motor CAPACITIE
            • Chuck: 42"
              Giddings & Lewis 96" x 120" Hydrostatic Rotary Index Table
              $RFQ
              Giddings & Lewis 96" x 120" Hydrostatic Rotary Index Table
              Reference #27645 Giddings & Lewis 96" x 120" Hydrostatic Rotary Index Table FEATURES: 75,000 lb Load Capacity 4-Positive Shot Pin Locations SPECIFICATIONS: Spindle Size ..........................
              • Diameter or width: 96"
              • Length: 120"
                Giddings & Lewis 360P 72" x 96" CNC Rotary Table
                $RFQ
                Giddings & Lewis 360P 72" x 96" CNC Rotary Table
                Reference #23421 Giddings & Lewis 360P 72" x 96" CNC Rotary Table FEATURES: 360 Degree Scale With 1/2 Degree Increments Hydraulic Clamping SPECIFICATIONS: Table Size ............................
                • Diameter or width: 72"
                • Length: 96"
                  Giddings & Lewis 360P 72" x 72" CNC Rotary Table & CNC In
                  $RFQ
                  Giddings & Lewis 360P 72" x 72" CNC Rotary Table & CNC In
                  Reference #19686 Giddings & Lewis 360P 72" x 72" CNC Rotary Table & CNC Infeeding Slide ROTARY TABLE: Table Size ............................. 72" x 72" B-Axis Rotation .................
                  • Diameter or width: 72"
                  • Length: 72"
                    AZ Spa CG500/3 39" x 200" CNC Crankshaft Grinder
                    $79,500
                    AZ Spa CG500/3 39" x 200" CNC Crankshaft Grinder
                    Reference #32038 AZ Spa CG500/3 39" x 200" CNC Crankshaft Grinder FEATURES: Siemens 840D CNC Controls Marposs P7 Gauging Marposs Shape Control Heidenhain Scales Wheel Balancing System Steady Rest
                    • Crankshaft swing: 39.37"
                      Mori Seiki Model MH-1003 CNC Horizontal Machining Center
                      $RFQ
                      Mori Seiki Model MH-1003 CNC Horizontal Machining Center
                      SPECIFICATIONS: Pallet Size 39.4” x 39.4” X-axis 80.3” Y-axis 51” Z-axis 47.2” Table Indexing 1° Maximum Table Load 6,600 lbs. Distance from Spindle Center to Table Top 1.97”-53.17” Distance from Spindle Nos
                      FADAL VMC 15 VERTICAL MACHINING CENTER 1994
                      $RFQ
                      FADAL VMC 15 VERTICAL MACHINING CENTER 1994
                      FADAL VMC 15 VERTICAL MACHINING CENTER 1994 Serial # 9404163 MODEL........................: 914-15 TRAVELS: X............................: 20" Y............................: 16" Z.....................
                      Fadal VMC 3016L Model 904-1L, CNC Vertical Machining Center, 1999
                      $RFQ
                      Fadal VMC 3016L Model 904-1L, CNC Vertical Machining Center, 1999
                      Fadal VMC 3016L Model 904-1L, CNC Vertical Machining Center, 1999 S/N 9910278 Fadal CNC 88 HS CNC Controller, 21-Automatic Tool Changer, CAT40 Taper, Work Light Table Size: 38″x16″ Travels: X Axis 30″ Y Axis
                      Fadal VMC 3016L Model 904-1L, CNC Vertical Machining Center, 1999
                      $RFQ
                      Fadal VMC 3016L Model 904-1L, CNC Vertical Machining Center, 1999
                      Fadal VMC 3016L Model 904-1L, CNC Vertical Machining Center, 1999 S/N 9910278 Fadal CNC 88 HS CNC Controller, 21-Automatic Tool Changer, CAT40 Taper, Work Light Table Size: 38″x16″ Travels: X Axis 30″ Y Axis
                      3/4" X 30" Eldorado Mega Model M-75-1041 Precision Deep Hole Gun
                      $RFQ
                      3/4" X 30" Eldorado Mega Model M-75-1041 Precision Deep Hole Gun
                      SPECIFICATIONS: Drilling Diameter Maximum .75” Drilling Diameter Minimum .055” Maximum Drilling Depth 30” Spindle Speeds 725-5860 RPM Drilling Feed Rate .1-99.9 IPM Rapid Feed Rate 200 IPM Work Table 22” x 26” H
                      Johnford SV-40 CNC Vert Machining Cntr, 47" x20" tbl, XYZ=41/20/2
                      $RFQ
                      Johnford SV-40 CNC Vert Machining Cntr, 47" x20" tbl, XYZ=41/20/2
                      JOHNFORD SV-40 CNC VERTICAL MACHINING CENTER Model SV-40, S/N MLB130534, New 2013 Stock # Q11996 EQUIPPED WITH: Fanuc 0i CNC Control, 10000 RPM Cat 40 Spindle, 24 ATC, Spindle Chiller, Chip Pan. SPECIFICATIONS:
                      • X axis: 41"
                      • Y axis: 20"
                        MECOF CS-88 Universal Boring & Milling Machine
                        $RFQ
                        MECOF CS-88 Universal Boring & Milling Machine
                        Reference #31589 MECOF CS-88 Universal Boring & Milling Machine CAPACITY: Head Vertical Travel, Y-Axis ......... 70" Table Travel, X-Axis ................. 169" Ram Travel, Z-Axis ...................
                        • Spindle diameter: 5"
                        • X axis travel: 169"
                          4' x 12" Ooya RE-1225H Radial Drill, 1985 RPM, #5 MT, 75" x30
                          $RFQ
                          4' x 12" Ooya RE-1225H Radial Drill, 1985 RPM, #5 MT, 75" x30
                          4' x 12" OOYA RADIAL ARM DRILL Model RE-1225H, S/N OA8-21000, New 1979 Stock # Q12015 EQUIPPED WITH: Hardened Arm Ways, Tapping Capabilities, Power Elevation, Power Clamping, Coolant System (Built-In).
                          • Arm length: 4.083'
                          • Column diameter: 12.625"
                            8' x 1/2" Bertsch 3-Roll Plate Bending Roll w/Air Drop End, Initia
                            $RFQ
                            8' x 1/2" Bertsch 3-Roll Plate Bending Roll w/Air Drop End, Initia
                            8' x 1/2" BERTSCH 3-ROLL INITIAL PINCH PLATE BENDING ROLL Model #9, S/N M-9980, New 1971 Stock # Q12014 EQUIPPED WITH: 3-Roll Hydraulic Initial Pinch Design, Air Drop End, Power Bottom-Roll Adjustment, Dia
                            • Roll length: 99"
                            • Thickness: 0.406"
                              HAAS HL-2BB CNC LATHE
                              $5,950
                              HAAS HL-2BB CNC LATHE
                              BIG BORE, PARTS CATCHER, CHIP CONVEYOR, 3400 RPM, 15 HP, 10"CHUCK
                              • Swing: 20"
                              • Centers: 20"
                                CHEVALIER FSG-3A818 SURFACE GRINDER
                                $8,950
                                CHEVALIER FSG-3A818 SURFACE GRINDER
                                2 HP, 8" GRINDING WHEEL
                                • Table width: 8"
                                • Table length: 18"
                                  16-36 Barber Colman Universal Gear Hobber
                                  $RFQ
                                  16-36 Barber Colman Universal Gear Hobber
                                  SPECIFICATIONS: Maximum Rated Diameter Pitch (Nominal) 6DP (4.2 Module) Maximum Rated Work Diameter 16” Maximum Hob Diameter 5” Maximum Hob Slide Travel 36” Maximum Work Slide Travel 8” Main Drive Motor 5HP Approx
                                  No. 16-36 Barber-Colman Universal Gear Hobber
                                  $RFQ
                                  No. 16-36 Barber-Colman Universal Gear Hobber
                                  SPECIFICATIONS: Capacity in Steel, 1 Cut 6 DP (4.2 Mod) Rated Work Diameter Max 16” Travel of Hob Carriage Max 36.5” Distance Work Spindle Face to Tail Center Max 64” Work Spindle to C/L of Hob Spindle Max 39.5” Wo
                                  Haas VF-2SS Machining Center
                                  $51,500
                                  Haas VF-2SS Machining Center
                                  Table: 14" x 36" Spindle: CAT 40 x-Axis Travel: 30" y-Axis Travel: 16" z-Axis Travel: 20" Tool Turret: 24 RPM: 12,000RPM Controller: Haas Year: 2017 4th axis: Ready 5th axis: Available
                                  Fadal VMC15 Machining Center
                                  $19,000
                                  Fadal VMC15 Machining Center
                                  Table: 16" x 39" Spindle: BT 40 x-Axis Travel: 30" y-Axis Travel: 16" z-Axis Travel: 20" Tool Turret: 21 RPM: 7,500RPM Controller: Fadal Year: 2006 Voltage / Phase: 220 / 3 Weight: 11,0
                                  2018 Bradbury Sheet Slitter
                                  $8,000
                                  2018 Bradbury Sheet Slitter
                                  Lightly used, 2018 Stand Alone Slitter 4.0" diameter hardened & precision ground arbors 42" Passline Maximum Sheet Width 48.50" / Minimum 4.0" Maximum material thickness .048" (18 gauge)
                                  8' x 3/8" Americor Double Pinch Plate Bending Roll
                                  $RFQ
                                  8' x 3/8" Americor Double Pinch Plate Bending Roll
                                  . We are pleased to offer for your consideration: (1) 3/8" x 8' Americor Double Pinch Plate Bending Roll Stock Number: 13985 List Price: On Request Manufacturer: Americor Model Number: 4RDP 250/8 S
                                  • Roll length: 100"
                                  • Thickness: 0.375"
                                    Fadal VMC15XT Machining Center
                                    $19,500
                                    Fadal VMC15XT Machining Center
                                    Table: 16" x 39" Spindle: BT 40 x-Axis Travel: 30" y-Axis Travel: 16" z-Axis Travel: 20" Tool Turret: 21 RPM: 7,500RPM Controller: Fadal Year: 2006 Voltage / Phase: 220 / 3 Weight: 11,0
                                    SNK PRODIGY MODEL GT-27 CNC GANG TOOL LATHE, MFG. 2006
                                    $RFQ
                                    SNK PRODIGY MODEL GT-27 CNC GANG TOOL LATHE, MFG. 2006
                                    WE APOLOGIZE THAT THE PHOTOS ARE NOT ROTATED CORRECTLY. I AM UNABLE TO MAKE THAT CHANGE. Spindle RPM – Variable: 100 to 6,000 RPM Spindle Bore: 1.0625″ (27mm) Bar Size – Maximum: 1.0625″ (27mm) Tool Blo
                                    • Swing: 0"
                                    • Centers: 0"
                                      National 5/16" Cold Header
                                      $12,500
                                      National 5/16" Cold Header
                                      National 5/16" High Speed Cold Header, DSSD Capacity: 5/16" x 1-1/2" ***Complete inspection report. Has not been used for production since inspection. Specifications: Maximum Cutoff Diameter: 5/16
                                      • Maximum workpiece diameter: 0.312"
                                      • Maximum workpiece length: 1.5"
                                        HNK NT-14/16FD CNC Vertical Lathe
                                        $RFQ
                                        HNK NT-14/16FD CNC Vertical Lathe
                                        Reference #43872 HNK NT-14/16FD CNC Vertical Lathe FEATURES: Fanuc 18T CNC Control (2) Vertical Rams (2) 12 Position Automatic Tool Changer Full Chip & Coolant Guards, Chip Conveyor Specifications:
                                        • Swing: 62.99"
                                          HNK VTB-12/16 47"/63" CNC Vertical Boring Mill
                                          $RFQ
                                          HNK VTB-12/16 47"/63" CNC Vertical Boring Mill
                                          Reference #43871 HNK VTB-12/16 47"/63" CNC Vertical Boring Mill FEATURES: Fanuc 18T CNC Control Vertical Ram 12 Position Automatic Tool Changer Full Chip & Coolant Guards, Chip Conveyor Spec
                                          • Swing: 62.99"
                                            MORI SEIKI ZL150S Duel Turret/Sub-spindle Cnc Lathe 2002
                                            $RFQ
                                            MORI SEIKI ZL150S Duel Turret/Sub-spindle Cnc Lathe 2002
                                            MORI SEIKI ZL150S Duel Turret/Sub-spindle Cnc Lathe 2002 S/N ZL150BE0266 SPECIFICATIONS Bar Capacity 1.77" Swing 26.77" Turning Diameter 17.32" Spindle Speed 5,000 RPM Co
                                            Doral 6048 6-Wheel Structural Plate Shot Blast System
                                            $RFQ
                                            Doral 6048 6-Wheel Structural Plate Shot Blast System
                                            Reference #43956 Doral 6048 6-Wheel Structural Plate Shot Blast System FEATURES: Less than 100 Hours Blasting Hours! MAXIMUM WORK: Maximum Plate Width ................... 62" Maximum I-Beam ...............
                                            ERBEND 10ft x 16 ga CNC Folder w/10ft x 14 ga Shear-Combo Pkg SAVE BIG $$!
                                            $RFQ
                                            ERBEND 10ft x 16 ga CNC Folder w/10ft x 14 ga Shear-Combo Pkg SAVE BIG $$!
                                            CALL 386-304-3720 FOR AVAILABILITY IN STOCK NOW! CALL FOR SPECIAL COMBO PRICE Distributor Overstock Mega Sale Selling At Well Below Cost with Factory Warranty. Limited Supplies Available. ERBEND 10ft x 16 ga CN
                                            • Maximum thickness capacity: 16Ga
                                            • Bending length: 126"
                                              2008 AMADA Pulsar 2415NT
                                              $RFQ
                                              2008 AMADA Pulsar 2415NT
                                              2008 AMADA Pulsar 2415NT, 4.0 KW, Max sheet size: 16’ X 5, Fanuc NT-PC Control, Year New: 2008 Model: Pulsar 2415NT Laser Power: 4.0 KW Laser Type: High Bred Max Sheet Size: 16’ X 5’ Reposition: Yes Z Axis Travel
                                              • Wattage: 4000W
                                              • X axis travel: 5'
                                                2018 AMADA LCG3015AJ
                                                $RFQ
                                                2018 AMADA LCG3015AJ
                                                AMADA LCG3015AJ, 2.0KW, 120” X 60” Max Sheet Size, Fanuc NT-PC Control, Year New: 2018 Model: LCG3015AJ Laser Power: 2.0KW Laser Type: Flying Optic Max Sheet Size: 120” X 60” Shuttle Table: Yes Z Axis Travel: 7.8
                                                • Wattage: 2000W
                                                • X axis travel: 5'
                                                  MITSUBISHI FX-1 WIRE EDM
                                                  $4,950
                                                  MITSUBISHI FX-1 WIRE EDM
                                                  SUBMERGED
                                                  • X axis travel: 14"
                                                  • Y axis travel: 10"
                                                    Zoller Venturion 600 (V420E2) Tool Pre-Setting and Measuring Machine,
                                                    $RFQ
                                                    Zoller Venturion 600 (V420E2) Tool Pre-Setting and Measuring Machine,
                                                    Zoller Venturion 600 (V420E2) Tool Pre-Setting and Measuring Machine, Upgraded 2011 SPECIFICATIONS: Measuring Range Z 23.6” Measuring Range X 8.7” Diameter 17.3” EQUIPPED WITH: Zoller Pilot 3.0 Operating and Ima
                                                    Zoller Saturn 2 V420E2 Tool Presetting Machine
                                                    $RFQ
                                                    Zoller Saturn 2 V420E2 Tool Presetting Machine
                                                    SPECIFICATIONS: Measuring Range Z 600mm (23.6”) Measuring Range X 350mm (13.7”) Max Tool Weight 20kg EQUIPPED WITH: Windows NTPC (with Diskettes). Zoller Multivision II Software (Diskettes Included). Keyboard and
                                                    BLANCHARD GRINDER
                                                    $7,950
                                                    BLANCHARD GRINDER
                                                    42" CHUCK
                                                    • Chuck: 42"
                                                      MATTISON HORIZONTAL SURFACE GRINER
                                                      $7,950
                                                      MATTISON HORIZONTAL SURFACE GRINER
                                                      18X72
                                                      • Table width: 18"
                                                      • Table length: 72"
                                                        Doosan DHP-4000 CNC Horizontal Machining Center
                                                        $RFQ
                                                        Doosan DHP-4000 CNC Horizontal Machining Center
                                                        Reference #43865 Doosan DHP-4000 CNC Horizontal Machining Center FEATURES: Fanuc 18i-MB CNC Control 60-Station Automatic Tool Changer 2-Station Automatic Pallet Changer 14,000 RPM Spindle Coolant Thru Spind
                                                        • X axis: 23.62"
                                                        • Y axis: 22.05"
                                                          Poreba TGZ 400B x 10M, 157" x 393" Universal Lathe
                                                          $RFQ
                                                          Poreba TGZ 400B x 10M, 157" x 393" Universal Lathe
                                                          Reference #27429 Poreba TGZ 400B x 10M, 157" x 393" Universal Lathe FEATURES: Component Style Displaceable Headstock Displaceable Tailstock 30 Ton Weight Capacity CAPACITY: Maximum Turning Dia.Over
                                                          • Swing: 157.48"
                                                          • Centers: 393.7"
                                                            Sunfirm CST-42160-10A CNC Hollow Spindle Lathe
                                                            $RFQ
                                                            Sunfirm CST-42160-10A CNC Hollow Spindle Lathe
                                                            Reference #43784 Sunfirm CST-42160-10A CNC Hollow Spindle Lathe FEATURES: Fanuc OiTC CNC Controls 8-Position Turret 24" 4-Jaw Front Chuck 30" 3-Jaw Rear Chuck 10" Spindle Bore Chip Convey
                                                            • Swing: 42"
                                                            • Spindle hole diameter: 10"
                                                              GOULD & EBERHARDT 96H Gear Hobber
                                                              $RFQ
                                                              GOULD & EBERHARDT 96H Gear Hobber
                                                              Reference #19028 GOULD & EBERHARDT 96H Gear Hobber FEATURES: 125" Maximum Diameter Capacity 78" Diameter Work Table Large Assortment of Change Gears (1) HOB ARBOR Chip Conveyor Miscellaneous Guar
                                                              • Maximum gear diameter: 98"
                                                                TSUGAMI BS-19 SWISS CNC SCREW MACHINE
                                                                $39,500
                                                                TSUGAMI BS-19 SWISS CNC SCREW MACHINE
                                                                FANUC CONTROL, IEMCA ELITE 220 BAR FEEDER
                                                                Okuma MC-V4020 Vertical Machining Center
                                                                $RFQ
                                                                Okuma MC-V4020 Vertical Machining Center
                                                                Okuma MC-V4020 Vertical Machining Center Year: 2000 Specifications: Table Size: 48" x 20" X Travel: 40" Y Travel: 20" Z Travel: 17" Max Table Load: 1500 Lbs Spindle Nose to Table: 6
                                                                DOOSAN LYNX 220 LMS CNC LATHE 2009
                                                                $RFQ
                                                                DOOSAN LYNX 220 LMS CNC LATHE 2009
                                                                DOOSAN LYNX 220 LMS CNC LATHE 2009 • BRAND: DOOSAN • YEAR: 2009 • MODEL: LYNX 220 LMS • APPLICATION TYPE: TURNING • MACHINE TYPE: TURN-MILL CENTRE • • CONTROL UNIT BRAND: FANUC i Technical Information - DOOSAN L
                                                                Mazak V414 CNC VMC, 1993
                                                                $RFQ
                                                                Mazak V414 CNC VMC, 1993
                                                                Mazak V414 CNC VMC, 1993 X-Axis: 22.05″ Y-Axis: 16.14″ Z-Axis: 18.11″ Table Top to Spindle Nose: 5.91″- 24.02″ Rapid Traverse Rate X, Y Axis: 945 IPM Rapid Traverse Z-Axis: 590 IPM Tool Storage Capacity: 30 Spind
                                                                HEM H100A HORIZONTAL AUTOMATIC BAND SAW
                                                                $7,950
                                                                HEM H100A HORIZONTAL AUTOMATIC BAND SAW
                                                                12" X 12" , 3 HP
                                                                2021 AMADA Ensis 3015 RI Rotary
                                                                $RFQ
                                                                2021 AMADA Ensis 3015 RI Rotary
                                                                2021 Ensis 3015 RI Rotary, 3KW, 120” X 60” Max Sheet Size, Fanuc NT-PC Control Model: AMADA Ensis 3015 RI Rotary Laser Power: 3KW Laser Type: Flying Optic Max Sheet Size: 120” X 60” Shuttle Table: Yes Z-Axis: 7.8
                                                                • Wattage: 3000W
                                                                  90 Ton x 6' Cincinnati 90CB-II CNC Hydaulic Press Brake (Control Update
                                                                  $RFQ
                                                                  90 Ton x 6' Cincinnati 90CB-II CNC Hydaulic Press Brake (Control Update
                                                                  Capacity 90 Tons Bed Length 8' Distance Between Housings 6'6 Stroke 8" Open Height 15" Throat 7" Approach Speed 150 IPM Form Speed 21 - 71 IPM Return Speed 136 IPM Main Motor 15 HP Weight
                                                                  • Tonnage: 90T
                                                                    Mazak Slant Turn 50N CNC Lathe
                                                                    $RFQ
                                                                    Mazak Slant Turn 50N CNC Lathe
                                                                    Reference #32751 Mazak Slant Turn 50N CNC Lathe FEATURES: Programmable Tailstock Mazatrol 640 T CNC Control 15-Position Turret 16" SMW 3-Jaw Chuck Coolant System (High Pressure) Chip Conveyor SMWSLU-4-ZS
                                                                    • Swing: 31.7"
                                                                    • Centers: 118"
                                                                      Ficep Tipo G 25 LG CNC Drilling, Milling & Thermal Cutting System
                                                                      $RFQ
                                                                      Ficep Tipo G 25 LG CNC Drilling, Milling & Thermal Cutting System
                                                                      Reference #43866 Ficep Tipo G 25 LG CNC Drilling, Milling & Thermal Cutting System for Large Plate FEATURES: Ficep Pegaso CNC Control (1) Plasma Torch Station Hypertherm XRP300 300 AMP Plasma Unit 20 HP Verti
                                                                      METALFLEX 90W 4CC
                                                                      $RFQ
                                                                      METALFLEX 90W 4CC
                                                                      METALFLEX 90W 4CC Spiral Duct Lock Forming Machine for sale, Manufactured in 1991. Features include PLC control, up-acting saw, 6" - 24" spiral duct capability, and a 7.5 HP motor. Includes 15 KVA transformer
                                                                      2022 Ensis 3015AJ 12000 w/ AMS 3015 CL cycle loader
                                                                      $RFQ
                                                                      2022 Ensis 3015AJ 12000 w/ AMS 3015 CL cycle loader
                                                                      Save big on a new Amada Ensis AJ 3015 12KW high-speed fiber laser with an AMS 3015 CL cycle loader. This system is like-new and is a high-production system for running automated lights-out operations. Model: Ensis 301
                                                                      • Wattage: 12000W
                                                                      • X axis travel: 5'
                                                                        SULLAIR LS-16 ROTARY SCREW COMPRESSOR
                                                                        $7,950
                                                                        SULLAIR LS-16 ROTARY SCREW COMPRESSOR
                                                                        75 HP
                                                                        H & H SPOT WELDER
                                                                        $4,950
                                                                        H & H SPOT WELDER
                                                                        UNDER POWER & RUNNING
                                                                        AMADA FS81-010 POWER SQUARING SHEAR
                                                                        $14,950
                                                                        AMADA FS81-010 POWER SQUARING SHEAR
                                                                        UNDER POWER & RUNNING
                                                                        • Maximum thickness: 10Ga
                                                                        • Cutting length: 4"
                                                                          55 TON AMADA CNC PRESS BRAKE
                                                                          $29,500
                                                                          55 TON AMADA CNC PRESS BRAKE
                                                                          NC9-EX CNC CONTOL, UNDER POWER & RUNNING
                                                                          • Tonnage: 55T
                                                                            DELTECH 2900 F ELECTRIC BELL (TOP HAT) FURNACE
                                                                            $RFQ
                                                                            DELTECH 2900 F ELECTRIC BELL (TOP HAT) FURNACE
                                                                            TOP HAT DESIGN WHERE FURNACE BODY IS LIFTED (AIR) FROM THE ROLL OUT BASE. INTERIOR IS LINED WITH LIGHT WEIGHT REFRACTORY AND HEATED BY "U" SHAPED MOLYDISILICIDE HEATING ELEMENTS HANGING DOWN FROM THE ROOF ON A
                                                                            • Chamber width: 48"
                                                                            • Chamber length: 24"
                                                                              2003 MORI SEIKI NV5000A/40 DUAL PALLET
                                                                              $RFQ
                                                                              2003 MORI SEIKI NV5000A/40 DUAL PALLET
                                                                              Very clean heavy duty machine with dual pallet APC system, this Mori Seiki NV-5000A/40 vertical machining center has 12,000 RPM and is coming out of an aerospace plant.
                                                                              • X axis: 31.5"
                                                                              • Y axis: 20"
                                                                                2016 KITAMURA MYTRUNNION-4G
                                                                                $RFQ
                                                                                2016 KITAMURA MYTRUNNION-4G
                                                                                With a built-in trunnion, this 2016 Kitamura Mytrunnion-4G is designed for high precision A-axis, C-axis, and simultaneous 5-axis machining. Machine includes Through Spindle Coolant, Renishaw Probing, and boasts 100 ATC
                                                                                2011 OKUMA MB-5000H
                                                                                $RFQ
                                                                                2011 OKUMA MB-5000H
                                                                                2011 OKUMA MB-5000H HMC with 15,000 RPM spindle, full 4th axis, 60 ATC, probes, and high-pressure coolant. Ready for immediate purchase.
                                                                                • X axis: 29.92"
                                                                                • Y axis: 29.92"
                                                                                  SUNNEN MBB-1660D
                                                                                  $RFQ
                                                                                  SUNNEN MBB-1660D
                                                                                  SUNNEN MBB-1660D used honing machine in good condition. Heavy/light cutting pressure adjustment, assortment of tooling.
                                                                                  • Maximum diameter: 0.06"
                                                                                  • Stroke: 0.06"
                                                                                    2018 DOOSAN NHP 5000
                                                                                    $RFQ
                                                                                    2018 DOOSAN NHP 5000
                                                                                    Fanuc 31i-MB Control, Full 4th Axis, Through-Spindle Coolant (1,000 PSI), MP Systems High-Pressure Coolant Unit, Renishaw Probing, 120 Tool Positions. This 2018 Doosan NHP 5000 horizontal machining center is available im
                                                                                    • X axis: 28.7"
                                                                                    • Y axis: 28.7"
                                                                                      2006 HAAS TM-1
                                                                                      $RFQ
                                                                                      2006 HAAS TM-1
                                                                                      Haas TM-1 with tool changer, partial enclosures and intuitive programming system. Available immediately,
                                                                                      • X axis: 30"
                                                                                      • Y axis: 12"
                                                                                        2010 DOOSAN PUMA 3100ULY
                                                                                        $RFQ
                                                                                        2010 DOOSAN PUMA 3100ULY
                                                                                        For sale: 2010 DOOSAN PUMA 3100ULY CNC Lathe. Accurate multi-axis machining with maximum cutting diameter of 16.54" and length of 123.03". Equipped with FANUC OI-TD CNC control, live tooling, Y-axis, chip conve
                                                                                        • Swing: 33.46"
                                                                                        • Centers: 123.03"
                                                                                          2006 HAAS MDC500 DUAL PALLET VMC
                                                                                          $RFQ
                                                                                          2006 HAAS MDC500 DUAL PALLET VMC
                                                                                          For sale: 2006 HAAS MDC-500 Vertical Machining Center, under 800 hours of spindle time, with pallets and 20" x 14" x 20" travel, 15,000 RPM spindle speed, 20 hp motor, and 24-tool ATC. Features include thr
                                                                                          • X axis: 20"
                                                                                          • Y axis: 14"
                                                                                            2006 HURCO VM1
                                                                                            $RFQ
                                                                                            2006 HURCO VM1
                                                                                            HURCO VM1 Vertical Machining Center, 2006, used. Table: 29" x 14", X/Y/Z Travel: 26"/14"/18", Spindle: 8,000 RPM, 10 hp, ATC: 16 tools. Equipped with ULTI POCKETS, chip auger, USB, floppy drive.
                                                                                            • X axis: 26"
                                                                                            • Y axis: 14"
                                                                                              2018 TSUGAMI S205 & EDGE BAR FEEDER
                                                                                              $RFQ
                                                                                              2018 TSUGAMI S205 & EDGE BAR FEEDER
                                                                                              20mm, Fanuc 32iMB Control, Edge Minuteman 320 Bar Feeder, MP Systems High-Pressure Coolant Unit, Mist Collector, FireTrace, Chip Conveyor, Chucker Kit, 6,000 Cutting Hours. This 2018 Tsugami S205 CNC swiss lathe is in pl
                                                                                              • Spindle hole diameter: 0.75"
                                                                                                2016 NS MAQUINAS DM1100C DEBURRING MACHINE
                                                                                                $RFQ
                                                                                                2016 NS MAQUINAS DM1100C DEBURRING MACHINE
                                                                                                Deburring/Edge Rounding Machine, Wet Dust Collector, (2) Abrasive Cross Belts, 43" x 1.9" Working Capacity. This 2016 NS Maquinas DM1100C is available immediately.
                                                                                                • Maximum sheet width: 43.3"
                                                                                                  CINCINNATI HEALD 2EF73 CNC BALL GRINDER
                                                                                                  $RFQ
                                                                                                  CINCINNATI HEALD 2EF73 CNC BALL GRINDER
                                                                                                  Cincinnati Heald 2EF73 CNC Ball Grinder - Used internal grinder with 23" max swing over workhead guard, 16" grinding stroke, and CNC control. Features Allen Bradley PanelView Plus 1000, Marposs P3ME gauging, an
                                                                                                  • Swing: 23"
                                                                                                  • Stroke: 16"
                                                                                                    2017 HAAS ST-40
                                                                                                    $RFQ
                                                                                                    2017 HAAS ST-40
                                                                                                    Extra Performance Option (55 HP), 2-Speed Gearbox, 15" chuck, 4" Bar Capacity, Tailstock, Tool Presetter, Chip Conveyor, only 3,000 Spindle Hours. This 2017 Haas ST-40 CNC lathe is in plant, under power and ava
                                                                                                    • Swing: 34.5"
                                                                                                    • Centers: 44"
                                                                                                      1997 MAKINO A55 DELTA
                                                                                                      $RFQ
                                                                                                      1997 MAKINO A55 DELTA
                                                                                                      1997 MAKINO A55 DELTA Horizontal Machining Center. Used, well-maintained from government facility and equipped with a FANUC/MAKINO Pro 3 control, 20,000 RPM HSK spindle, through spindle coolant, extra pallet, and many ad
                                                                                                      • X axis: 22"
                                                                                                      • Y axis: 22"
                                                                                                        2017 OKUMA LB3000EXII MYW 800 BB
                                                                                                        $RFQ
                                                                                                        2017 OKUMA LB3000EXII MYW 800 BB
                                                                                                        Used OKUMA LB3000EXII MYW 800 BB CNC Lathe, 2017. Features swing over bed: 22.83", max cutting diameter: 13.39", Y-axis travel: +2.76"/-1.77", spindle speed: 4200 RPM. Includes IEMCA barfeed, sub spin
                                                                                                        • Swing: 22.83"
                                                                                                        • Centers: 37.4"
                                                                                                          CHEVALIER #QP1620-L VERTICAL MACHINING CENTER
                                                                                                          $RFQ
                                                                                                          CHEVALIER #QP1620-L VERTICAL MACHINING CENTER
                                                                                                          SPECIFICATIONS & EQUIPPED WITH: -- SERIAL: F117C03 -- 10,000RPM -- FANUC OI-MD -- 4TH AXIS ROTARY -- X,Y,Z - 20.5, 15, 15 -- ATC - 20 -- TABLE: 12.6" X 27.6" -- WGT: 5,000LBS.
                                                                                                          2020 HAAS VC-400
                                                                                                          $RFQ
                                                                                                          2020 HAAS VC-400
                                                                                                          Haas NextGen Control, Pallet-Changing Vertical Machining Center, 2-Pallets, 15,000 RPM, Through-Spindle Coolant, Renishaw Probing, 50 Tool Positions, Chip Conveyor, only 1,100 Cutting Hours. This 2020 Haas VC-400 is in p
                                                                                                          • X axis: 22"
                                                                                                          • Y axis: 16"
                                                                                                            2010 DOOSAN DNM 400
                                                                                                            $RFQ
                                                                                                            2010 DOOSAN DNM 400
                                                                                                            From single-shift aluminum cutting facility - DOOSAN DNM 400 vertical machining center, 2010 model. Features include 36.22" table length, 8000 RPM spindle speed, CAT 40 taper, 30-tool capacity, and FANUC I Series CN
                                                                                                            • X axis: 30"
                                                                                                            • Y axis: 17.13"
                                                                                                              1998 HAAS VF-2
                                                                                                              $RFQ
                                                                                                              1998 HAAS VF-2
                                                                                                              For sale: HAAS VF-2 Vertical Machining Center, 1998 model. Features 36" x 15" table, 30" x 16" x 20" travel, 7,500 RPM spindle, and 20 hp motor. Includes 4th axis drive, programmable coolant, chi
                                                                                                              • X axis: 30"
                                                                                                              • Y axis: 16"
                                                                                                                2017 DOOSAN PUMA 2600SY & LNS BARFEED
                                                                                                                $RFQ
                                                                                                                2017 DOOSAN PUMA 2600SY & LNS BARFEED
                                                                                                                Only 5,278 Hours, Live-Milling, Sub Spindle, Y-axis, Renishaw Probe, Barfeed. This 2017 Doosan Puma 2600SY CNC multi-axis lathe also includes a chip conveyor, tool presetter, parts catcher, and live and static tooling.
                                                                                                                • Swing: 30.7"
                                                                                                                • Centers: 29.9"
                                                                                                                  AEM/TIMESAVER 501-37 ALL PRO WET
                                                                                                                  $RFQ
                                                                                                                  AEM/TIMESAVER 501-37 ALL PRO WET
                                                                                                                  AEM/TIMESAVER 501-37 APMW belt grinder, used, features a 37" x 75" belt, 8" opening height, and 45 ft/min conveyor speed. Powered by a 20 hp motor and equipped with adjustable conveyor height, sheet blower
                                                                                                                  • Belt width: 37"
                                                                                                                    SOUTHWESTERN INDUSTRIES PROTO-TRAK DPM3, 2018 RETROFIT
                                                                                                                    $RFQ
                                                                                                                    SOUTHWESTERN INDUSTRIES PROTO-TRAK DPM3, 2018 RETROFIT
                                                                                                                    2018 Retrofitted Southwestern Industries Proto-Trak DPM3 Vertical Mill. Features a 10"x50" table, 30"x17"x23.5" travel, 5 hp motor, 5,050 RPM speed, and #40 NST spindle. Equipped with 3-axis cont
                                                                                                                    • Table width: 10"
                                                                                                                    • Table length: 50"
                                                                                                                      TRENT ELECTRIC OVEN
                                                                                                                      $RFQ
                                                                                                                      TRENT ELECTRIC OVEN
                                                                                                                      BATCH OVEN
                                                                                                                      • Chamber width: 30"
                                                                                                                      • Chamber length: 30"
                                                                                                                        40 TON IRON CRAFTER HYDRAULIC IRONWORKER
                                                                                                                        $RFQ
                                                                                                                        40 TON IRON CRAFTER HYDRAULIC IRONWORKER
                                                                                                                        IRONWORKER
                                                                                                                        • Angle L1: 3"
                                                                                                                          2016 HAAS UMC-750SS
                                                                                                                          $RFQ
                                                                                                                          2016 HAAS UMC-750SS
                                                                                                                          For sale: Used 2016 HAAS UMC-750SS Universal Machining Center with 19.7" x 24.8" table, 30"x20"x20" travel, 15,000 RPM spindle, and 40-tool ATC. Features include NextGen CNC, through-spindle cool
                                                                                                                          Mazak M-5N 2000 CNC Flat Bed Lathe
                                                                                                                          $RFQ
                                                                                                                          Mazak M-5N 2000 CNC Flat Bed Lathe
                                                                                                                          SPECIFICATIONS: Swing over Bed 24” Swing over Cross Slide 13” Distance between Centers 82” Chuck Diameter 18” 3-Jaw Spindle Nose A1-II Spindle Bore 5-1/2” Front Turret 6-Positions Rear Turrret 8-Positions Tailst
                                                                                                                          SUPERMAX FV102A VMC
                                                                                                                          $8,950
                                                                                                                          SUPERMAX FV102A VMC
                                                                                                                          FANUC 18M, 15 HP, CT-40, 10,000 RPM, 24 ATC
                                                                                                                          • X axis: 40"
                                                                                                                          • Y axis: 20"
                                                                                                                            SUPERMAX FV102A VMC
                                                                                                                            $8,950
                                                                                                                            SUPERMAX FV102A VMC
                                                                                                                            FANUC 18M, 15 HP, CT-40, 10,000 RPM, 24 ATC
                                                                                                                            • X axis: 40"
                                                                                                                            • Y axis: 20"
                                                                                                                              Rush Model FC 500D PCD, Carbide, HSS Tool Grinder
                                                                                                                              $RFQ
                                                                                                                              Rush Model FC 500D PCD, Carbide, HSS Tool Grinder
                                                                                                                              SPECIFICATIONS: Tip Grinding Radii 0 to 8mm (.0315”) Round Tool Shank Diameters 3mm (0.118”) to 26mm (1.02”) Grinding Spindle Speed (RPM) 0 to 3600 Power 3HP Height Adjustment 130mm (5.12”) Grinding Wheel Oscil
                                                                                                                              GILDEMEISTER GS-20 SWISS TYPE CNC SCREW MACHINE
                                                                                                                              $39,500
                                                                                                                              GILDEMEISTER GS-20 SWISS TYPE CNC SCREW MACHINE
                                                                                                                              6 SPINDLE, 20MM, ALLEN BRADLEY CONTROL, BAR FEED
                                                                                                                              2019 HAAS ST-50
                                                                                                                              $RFQ
                                                                                                                              2019 HAAS ST-50
                                                                                                                              Low Hours. 8.5" Bore, Gearbox, Back Chuck, 80" Between Centers, Tailstock, Chip Conveyor. This underutilized heavy duty 2019 Haas ST-50 large bore high torque 2-axis cnc lathe is under power and ready to insp
                                                                                                                              • Swing: 34.5"
                                                                                                                              • Centers: 80"
                                                                                                                                2024 HAAS VF-1
                                                                                                                                $RFQ
                                                                                                                                2024 HAAS VF-1
                                                                                                                                Experience precision with the 2024 HAAS VF-1 Vertical Machining Center. Featuring a 26" x 14" table, 20" x 16" x 20" travel, 8,100 RPM spindle, and 30 hp motor. Equipped with probing system, tool
                                                                                                                                • X axis: 20"
                                                                                                                                • Y axis: 16"
                                                                                                                                  2015 HAAS UMC-750SS
                                                                                                                                  $RFQ
                                                                                                                                  2015 HAAS UMC-750SS
                                                                                                                                  5-Axis, 15,000 RPM, Through Spindle Coolant, Probe, 40 ATC. This single shift 2015 Haas UMC-750SS cnc vertical machining center also includes Programmable Coolant, High Speed Machining, Axillary Coolant Filter, and Chi
                                                                                                                                  Grieve Inert Atmos. 24" x 24" x 36", 550F UNUSED
                                                                                                                                  $RFQ
                                                                                                                                  Grieve Inert Atmos. 24" x 24" x 36", 550F UNUSED
                                                                                                                                  Inert Atmosphere cabinet oven model IB-550, 24"W x 24"H x 36"L work area, 550F, type 304 stainless steel interior, horizontal air-flow,  leg stand, Watlow F4 programmable temperature control, optional
                                                                                                                                  • Chamber width: 24"
                                                                                                                                  • Chamber length: 36"
                                                                                                                                    Doosan DNM 5700 Vert Mach Cntr, Fanuc 0i, 51" x22" Table, 2017, L
                                                                                                                                    $RFQ
                                                                                                                                    Doosan DNM 5700 Vert Mach Cntr, Fanuc 0i, 51" x22" Table, 2017, L
                                                                                                                                    DOOSAN DNM 5700 CNC VERTICAL MACHINING CENTER Model DNM 5700, S/N MV0091-001370, New 2017 Stock # Q11451 EQUIPPED WITH: Fanuc i Series CNC Control, 15000 RPM Spindle (upgraded option), 40 Station Tool Changer (upgr
                                                                                                                                    • X axis: 41.3"
                                                                                                                                    • Y axis: 22.4"
                                                                                                                                      Categories:
                                                                                                                                      Condition:
                                                                                                                                      Manufacturer:
                                                                                                                                      Location:
                                                                                                                                      Price:
                                                                                                                                      •  to 
                                                                                                                                      <Prev | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | Next>