buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Cleaning, Plating, Polishing, Finishing > Used

Used Metal Finishing Machines For Sale

245 used metal finishing machine items for sale
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 1 - 20 of 245 matches
Sort by:
Items Per Page:  20  |  50 |  100
Burr King 300 Vibratory Finisher
$RFQ
Burr King 300 Vibratory Finisher
Capacity 3 Cubic Feet Inside Tank Dimensions 13 x 13 x 13" Main Motor 1 HP Approx. Machine Weight 400 lbs. Equipped with: 5" Round Discharge Door Fluid System w/Pump
RSA RASAMAX MONO DEBURRER
$RFQ
RSA RASAMAX MONO DEBURRER
HEAVY DUTY DEBURRING MACHINE MODEL: RASAMAX MONO   THIS MODERN, HEAVY-DUTY MACHINE IS DESIGNED FOR EDGE DEBURRING OF STEEL AND NON-FERROUS SHEET METAL.  THE SHEET METAL IS GUIDED INTO THE BRUSH BY THE OPE
RSA NN-C-1000M DEBURRER
$RFQ
RSA NN-C-1000M DEBURRER
HEAVY DUTY AUTOMATIC TUBE AND BAR END DEBURRING MACHINE MODEL: NN-C-1000M   GENERAL DESCRIPTION:   THIS HEAVY-DUTY, TUBE END DEBURRING MACHINE IS DESIGNED FOR MANUAL LOADING OF THE CUT PIECES.   TU
JONSEN SD-H DEBURRER
$RFQ
JONSEN SD-H DEBURRER
JONSEN SWING ARM DEBURRING & GRINDING MACHINE MODEL: SDH, S/N: S22051308, NEW: 2018   SPECIFICATIONS: TOTAL POWER:............................. 3.75KW VACUUM PUMP POWER:....................... 3.KW SWING A
14 Cu. Ft. Sweco FM-14LR, 1984, SEPARATOR, VIBRATORY FINISHER
$RFQ
14 Cu. Ft. Sweco FM-14LR, 1984, SEPARATOR, VIBRATORY FINISHER
                                    &nbs
LEXAIR VIBRATORY FINISHER
$RFQ
LEXAIR VIBRATORY FINISHER
Abrasive Finishing Vibratory Tumbler Model 2016   Specifications: Unit: 35-1/2" high x 22-1/2" wide x 27" long Tub: 15-3/4" deep x 15-1/2" wide x 19-3/4" long 1/2" Urethane l
5 Cu. Ft. Royson 5-CDT-IS, COB MEAL DRYER, 2012 VIBRATORY FINISHER, 2,649 HOURS ON TIMER,
$RFQ
5 Cu. Ft. Royson 5-CDT-IS, COB MEAL DRYER, 2012 VIBRATORY FINISHER, 2,649 HOURS ON TIMER,
     5 CU. FT. ROYSON "MADE IN USA"   VIBRATORY COB MEAL DRYER WITH INTERNAL PARTS SEPERATOR         MODEL: 5-CTD-IS      
Graymills TUS3725SL-J WASHING EQUIPMENT
$29,500
Graymills TUS3725SL-J WASHING EQUIPMENT
Graymills TUS3725SL-J Ultrasonic Parts Washer with LKR36 Immersion Parts Washer   Equipped With PLC Control Platform Agitation Automatic Lid Pneumatic System FLR Timed Clean Cycle 27/7 Heater and Skimm
5 Cu. Ft. Roto-Finish ER-0405S-00-A29, 2000, PARTS SEPARATOR, TIMER, VIBRATORY FINISHER
$RFQ
5 Cu. Ft. Roto-Finish ER-0405S-00-A29, 2000, PARTS SEPARATOR, TIMER, VIBRATORY FINISHER
  5 CU. FT. ROTO-FINISH "EXTENDED RANGE" SERIES          VIBRATORY FINISHING MILL        WITH INTERNAL PARTS SEPERAT
2.5 Cu. Ft. BUR BENCH 2016 VIBRATORY FINISHER
$RFQ
2.5 Cu. Ft. BUR BENCH 2016 VIBRATORY FINISHER
BURR BENCH VIBRATORY FINISHER   MODEL:  2016       NEW: 2006   2.55 CU. FT. CAPACITY 35- 1/2" HIGH x 22- 1/2" WIDE x 27" LONG TUB:  15- 3/4" DEE
32" Width 24" Height Cyclo Blast P/N 300281-3224-F, 1979, DUST COLLECTOR BLAST C
$RFQ
32" Width 24" Height Cyclo Blast P/N 300281-3224-F, 1979, DUST COLLECTOR BLAST C
  CYCLO-BLAST SAND BLAST CABINET   MODEL: PN-300281-3224-F     S/N: C-790103   32" L-R 24" Width     MADE IN BELMONT CALIFORNIA   SPECIAL NOTE:  
Rampe MODEL:12A2, 2007 TUMBLING BARREL
$RFQ
Rampe MODEL:12A2, 2007 TUMBLING BARREL
RAMPE TUMBLER MODEL: 12A2   CHAMBER WIDTH:...... 19 1/2" CHAMBER DIAMETER:... 12" DOOR HEIGHT:........ 4 1/4" DOOR WIDTH:......... 16"   OVERALL DIMENSIONS: 32" L-R, 33" F-
1.5HP Motor 2Hd Heads Baldor 412B, 10" DOUBLE END BUFFER, WITH FLOOR STAND BUFFER POL
$RFQ
1.5HP Motor 2Hd Heads Baldor 412B, 10" DOUBLE END BUFFER, WITH FLOOR STAND BUFFER POL
10" BALDOR  #412B DOUBLE END POLISHER/BUFFER   S/N: F811    NEW:  2005     1.5 H.P. MOTOR, 3 PHASE/60 HZ/230-460 VOLTS PUSHBUTTON ON & OFF PEDESTAL BASE  
34" Width 23" Height Empire EF-2436, 2007, DUST COLLECTOR, 120 VOLTS BLAST CLEAN
$RFQ
34" Width 23" Height Empire EF-2436, 2007, DUST COLLECTOR, 120 VOLTS BLAST CLEAN
  EMPIRE "ECONO-FINISH" SERIES BLAST CABINET   MODEL:  EF-2436     S/N:  C-17154     NEW: 2007   34" L-R X 24"D x 23"H CA
48" Width Falls 131 DEBURRER
$4,450
48" Width Falls 131 DEBURRER
  FALLS PRODUCTS D-BUR-R DEBURRER MODEL 131          S/N 3520        NEW 2007   Thickness capacity ......... 24 ga. - 1/4"
2.9 CuFt OTEC DF70 Drag Finisher, 7"Dia x 9.8"H Part Cap, Wet, Au
$RFQ
2.9 CuFt OTEC DF70 Drag Finisher, 7"Dia x 9.8"H Part Cap, Wet, Au
Year Built - 2006 Serial No. 70/06 0230 SPECIFICATIONS: Process Container (Drum): - Volume............22 Gals. (2.9 CuFt) - Immersion depth - maximum............9.8" - Media fill height (dry) - approximate..
2.9 CuFt OTEC DF70 Drag Finisher, 7"Dia x 9.8"H Part Cap, Wet or
$RFQ
2.9 CuFt OTEC DF70 Drag Finisher, 7"Dia x 9.8"H Part Cap, Wet or
Year Built - 2002 Serial No. 70W/02 0001 SPECIFICATIONS: Process Container (Drum): - Volume............22 Gals. (2.9 CuFt) - Immersion depth - maximum............9.8" - Media fill height (dry) - approximate.
50" Width 43" Height Zero Blast BNP220, SUCTION TYPE, RPH-2R COLLECTOR, RECLAIME
$RFQ
50" Width 43" Height Zero Blast BNP220, SUCTION TYPE, RPH-2R COLLECTOR, RECLAIME
ZERO BLAST CABINET, SUCTION TYPE       MODEL: BNP220 ORDER No. 14086 S/N: 48924     NEW: 1998     ZERO BLAST MODEL RPH-2R COLLECTOR ORDER No. 5033-0600 SERIAL NUMBER 42
Parker Ionics Batch System Paint Booth
$RFQ
Parker Ionics Batch System Paint Booth
Reference #43932 Parker Ionics Batch System Paint Booth LIST OF COMPONENTS: (3) Rapid Engineering Batch ovens Model # 121035, 12' Wide Clear Width x 35' Deep (1) Parker Ionics – Q-flo 7200 powder booth, 12
IRM Four Head Brushing Machine with Recoiler
$RFQ
IRM Four Head Brushing Machine with Recoiler
IRM Four Head Brushing Machine with RecoilerMaximum Strip Width: 4 Approx. Thickness Capacity: 0.125 Brushing Heads: Four, (2) Top , (2) Bottom, 2 Diameter Hardened Shafts Brush Size: 6 OD with 2 ID Wire Sup
Related Subcategories:
Categories:
Condition:
  • X Used (245)
Manufacturer:
Location:
Price:
  •  to 
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>