buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Rolling Mills & Ring Formers > Used

Used Rolling Mills For Sale

285 used rolling mill items for sale
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 1 - 20 of 285 matches
Sort by:
Items Per Page:  20  |  50 |  100
24" ROLLING MILL
6:" DIAMETER ROLLS VARIABLE SPEED DRIVE MANUAL ROLL ADJUSTMENT ROLLS RECENTLY REDONE GERHARD - KESTERMANN 2 ROLL SINGLE STAND WGT: PRICE: FOB BROOK PARK, OH - - - $ 12,500 SUBJECT TO PRIOR SALE
IRM ROLLING MILL
SERIAL: 051595 3" X 6" DIAMETER ROLLS 230/460V/3 PHASE 4" BETWEEN COLUMNS DIM: 54"LR X 62"FB X 58"T WGT: 2,470LBS PRICE: FOB BROOK PARK, OH - - - $ 9,950.00 SUBJECT TO PRIOR SALE
16 Stand x 1-1/2" x 10" DAHLSTROM Rollformer
Model #400-12 OB Serial #1064 Stands: 16 Direction: R-L Spindle Dia: 1.5" Rollspace: 10" Horizontal Center: 13" Vertical Adjustment: 4.5"-6.5" Base Top to Center Lower Spindle: 7.25"
  • # Stands: #16
  • Roll diameter: 1.5"
    12 Stand x 1-1/2" x 8" DAHLSTROM Rollformer
    Model #360-12 Serial #332 Stands: 12 Direction: R-L Spindle Dia: 1.5" Rollspace: 8" Horizontal Center: 8" Vertical Adjustment: 4"-5.25" Base Top to Center Lower Spindle: 4.5" Spindl
    • # Stands: #12
    • Roll diameter: 1.5"
      16 STAND x 48″ x 3.5″ SHAFT BRADBURY ROLLFORMER
      REFERENCE NUMBER: 18022 MODEL #: D2-48-16 SERIAL #: 10217 48″ ROLLSPACE 3.5″ DIAMETER SHAFTS 20″ HORIZONTAL CENTERS 5″ – 9″ VERTICAL ADJUSTMENT (2) 8 STAND BASES 6″ LOWER SPINDLE TO BASE 14.5″-18.5″ CENTER UPP
      • # Stands: #16
      • Roll diameter: 3.5"
        22 STAND TRU TECH ROLLFORMER 2″ DIAMETER SHAFTS 24″ ROLL SPACE
        REFERENCE NUMBER: 18052S MODEL #: R-22 SERIAL #: 01989-02500 22 STANDS 2″ DIAMETER SHAFTS 24″ ROLL SPACE 3″ VERTICAL ADJUSTMENT 5″-8″ VERTICAL HEIGHT 15″ HORIZONTAL DISTANCE BETWEEN STANDS SINGLE BASE RIG
        • # Stands: #22
        • Roll diameter: 2"
          14 STAND B & K 3.5″ ARBOR ROLLFORMER 42″ ROLLSPACE EQUAL GEARED
          REFERENCE NUMBER: 18041 ROLLFORMER: MODEL #: 2B-11 14 STANDS 3-1/2″ ARBORS 42″ ROLLSPACE EQUAL GEARED 4-1/2″ – 9-3/4″ VERTICAL ADJUSTMENT 16″ HORIZONTAL ADJUSTMENT 6-5/8″ BED TO CENTER OF BOTTOM SHAFT 52″ WIDT
          • # Stands: #14
          • Roll diameter: 3.5"
            10% OFF ROLLFORMERS! Year End Sale
            10% OFF EVERYTHING! Year End Sale Limited Time Offer! Applies only to machinery paid in full no later than 12/31/2019. Offer valid for original list price. Not valid with any other specials, discounts, custom lines or
            FAWCUS, 75 HP AC, 2 HIGH ROLLING MILL HAND LEVER SCREWDOWNS, (13648)
            MACHINE # 13648 Manaufacturer: Fawcus Roll Size: 18" (457mm) x 20" (508mm) Screwdowns: Individual Hand Lever Drive Motor: 75 HP, General Electric AC, 550 V
            12" (305mm) x 12" (305mm) RUESCH 2 HI, 150 HP, (13647)
            MACHINE # 13647 Manufacturer: Ruesch Machinery Company Type Mill: 2 High Rolling Mill Roll Size: 12" (305mm) Diameter x 12" (305mm) Width Screwdowns: Po
            7" (178mm) x 8" (203mm), FENN, 2-HI, 20HP/208V/1750RPM/3PH/60HZ (13646)
            MACHINE# 13646 SPECIFICATIONS: Manufacturer: Fenn Manufacturing Co. (U.S.A.) Type: Flattening Precision Rolling Mill Year of manufacture: 1968 Roll width: 8" (203mm)
            10 Stand x 1-1/2" x 37" BRADBURY Duplex Rollform Line
            Stock #3724 Model #130 Serial #35256 Maximum Blank Width: 37″ Horizontal Center Distance: 7″ Shaft Diameter 1-1/2″ Roll Space: 3″ Forward and Reverse Jogging Anti-Friction Bearings Capacity: 20,000 Lbs Coil ID:
            • # Stands: #10
            • Roll diameter: 1.5"
              Six stand H/V billet mill, 30" & 26" diameter rolls, 1500 hp
              Will sell individual stands, roller bearings, spare rolls, chocks and bearings
              22" x 70" Morgardshammer 3-Hi billet mill with tilt tables, rolle
              Model P-473 with three set up stands, spare rolls, 1000 hp drive motor
              45" x 102" 2-Hi Blooming, Hot, Reversing, rolling mill, 2-5000 hp
              1972, Schloemann, two 5000 hp, 30/75 rpm, Westinghouse drive motors, 40" roll gap, 1100 ton shear, front and back roller tables, front and back slab manipulators
              32" x 60" 2-Hi Blaw Knox, hot, reversing Bloom/slab rolling mill
              1966 Blaw Knox reversing 2-Hi rolling mill complete with manipulators, front & back roller tables, crop shear, down coiler
              14" x 16", RWF, HYD SCREWDOWN, NON REV, (11904)
              MACHINE # 11904 MANUFACTURER: RWF (GERMANY) UPGRADED BY: I2S ROLL SIZE: 14" (350mm) DIAMETER X 16" (400mm) WIDTH MILL STAND CROSS SECTION: 8" (203.2mm) X 13.5"
              13", WATERBURY FARREL SENDZIMIR/I2S ZR33-13, REVERSING MILL (13635)
              MACHINE 13635 MANUFACTURER - WATERBURY FARREL CORPORATION (USA) TYPE - SENDZIMIR 20 HI MODEL - ZR33-13 YEAR OF MANUFACTURE - 1976 YEAR OF REBUILD - 1995 REBUILDER - INTERGRATED INDUSTRIAL SYSTEMS (I2S) MATERIAL - CARBON
              Roof Panel & Cap,Hayes/Bradbury SLR (Standing Lock Rib),Uncoil,Level/Cu
              Used - Bradbury/Hayes Standing-Seam Roof Panel Line Rollformer, Type SLR (Standing Lock Rib) Serial No. 11854 New - 2003 SPECIFICATIONS: Coil Width Range...............................................29.5"
              7 Stands Yoder M1.5 ROLL FORMER, CURRENTLY TOOLED FOR CABINET RACK INDUSTRY
                7 STAND YODER M1.5 ROLL FORMING LINE   CURRENTLY TOOLED FOR CABINET RACK INDUSTRY   CONSISTING OF:   2500 LBS LITTEL UNCOILER CAPACITY - 2500 LBS WIDTH - 12" ID RANGE - 16"-20
              Related Subcategories:
              Condition:
              • X Used (285)
              Price:
              •  to 
              1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>