buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Used > Connecticut

Used Machine Tools in Connecticut

590 used machine tools items for sale in Connecticut
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 1 - 20 of 590 matches
Sort by:
Items Per Page:  20  |  50 |  100
Grieve 60" x 72"H x 72"L Walk-in Oven Electric, 500F
Grieve 60" x 72"H x 72"L model WRC-566 Walk-in Oven, 500F with Partlow MRC-7000 Programmable recording temperature control. 460 Volts, 40 KW.
  • Chamber width: 60"
  • Chamber length: 72"
    Precision Quincy Walk-in, 60" x 60" x 60" 500F Gas Fired
    Precision Quincy Walk-in, 60" x 60" x 60" 500F, Gas Fired model 75-500, with aluminized steel interior, insulated floor with wheel guide channels. Honeywell UDC-2000 control. Fans & control circuits
    • Chamber width: 60"
    • Chamber length: 60"
      1/4", SHUSTER, Mdl 2A4EV75L, WIRE STRAIGHTEN AND CUT OFF (13839)
      MACHINE 13839 1/4" Shuster Model 2A4EV75L Wire Straighten and Cutoff Machine Manufacturer: Shuster Machine Type Machine: Wire Straighten and Cutoff Capacity: .093"-.250" FPM (feed speeds): 28 to 300 Longest Cut: 3' Short
      1/4", SHUSTER, Mdl 1AVS5, Wire Straighten and Cutoff (13840)
      MACHINE 13840 1/4" Shuster Model 1AVS5 Wire Straightening & Cutoff Machine .062" - .250" Min/Max Cutoff Diameter 20 - 200 FPM 4' Runout Vari Drive Electrics: AC Motor & Controls Weight: 2,000# **Temporary Specifications
      3/16", SHUSTER, No. 1A, WIRE STRAIGHTEN AND CUT OFF (13837)
      MACHINE 13837 3/16" Shuster 1A Straighten And Cut Machine Wire Diameter Range: .062" - .187" Maximum Length: 7'8" Maximum Speed: 120 FPM Motor: 10 HP Electrics: 220/440V **Temporary Specifications Subject to Revisions**
      3/16", LEWIS, No. 7D, WIRE STRAIGHTEN AND CUT OFF (13836)
      MACHINE 13836 7D Lewis Wire Straighteners & Cut-Offs Type: Wire Straighteners & Cut-Offs Model: 7D Brand: LEWIS Serial # 146 Condition: Good Description: 3/16" Lewis 7D Wire Straighten And Cut Machine Wire Diameter Range
      4 STAND TANDEM FENN/WATERBURY FARREL WIRE FLATTENING LINE (13838)
      MACHINE 13838 MANUFACTURER ...................... FENN MFG & WATERBURY FARREL MFG NUMBER OF ROLL STANDS ............. 4 START & FINISH SIZE ............... .750" FINISH SIZE .200 FIRST PASS ROLL ................... 14" D
      RUESCH 12 ROLL TWO PLANE STRAIGHTENER, 15 HP (13835)
      MACHINE #13835 SPECIFICATIONS -MANUFACTURER: H.J. RUESCH & CO. (U.S.A.) -TYPE: 2 PLANE STRAIGHTENER -ROLLS -DIAMETER: 4 1/2" (114.3mm) -FACE WIDTH: 3 1/8"
      48" (1220mm) x 7" (178mm) DAHLSTROM, 12,000 Lbs, SLITTING LINE (13829)
      Machine # 13829 Manufacturer Dhalstrom USA Capacity: 48" (1220mm) Width 0.44" (11mm) - 0.125" (3.175mm) Uncoiler with Coil Car 12,000 Lbs (5454 kilos) Capacity Pinch Rolls Driven
      12 1/2" (320mm) x 44" (610mm) x 41" (1050mm) UNITED, REVERSING w/AGC (13833
      MACHINE #13833 SPECIFICATIONS: MANUFACTURER: UNITED ENGINEERING CO. (U.S.A.) TYPE: 4-HI COLD REVERSING MILL WITH AUTOMATIC GAUGE CONTROL WORK ROLL DIAMETER: 12.6" (320mm) BACKUP ROLL DIAMETER: 44" (1120mm) ROLL WIDTH: 41
      2500 Ton, HYDRAULIK DUISBURG (DEMAG) WATER EXTRUSION PRESS (13843)
      MACHINE #13843 SPECIFICATIONS: MANUFACTURER: HYDRAULIK DUISBURG (DEMAG) GERMANY TYPE: DIRECT HORIZONTAL WATER HYDRAULIC EXTRUSION RATED CAPACITY: 2500 METRIC TONS NOTE: PRESS HAD A 300 TON PIERCER AND CAPACITY WAS 2200/2
      48" (1219mm) Dia x 116" (2946mm) H., EBNER, GAS FIRED, BELL ANNEALING (13841)
      MACHINE #13841 SPECIFICATIONS: MANUFACTURER: EBNER GMBH (AUSTRIA) TYPE: GAS-FIRED BELL ANNEALING FURNACE FOR STEEL YEAR OF MANUFACTURE: 1996 MAXIMUM TEMPERATURE: 1562 DEG. F (850 DEG. C) ATMOSPHERE: HYDROGEN CAPACITY: 45
      8,000 Lb. (3628 KG) x 48" (1220mm), SOUTHWORTH, COIL CAR (13832)
      MACHINE #13832 SPECIFICATIONS: -8,000# (3628 Kg) x 48" (1220mm) Wide Capacity -30" (762mm) Wide "V" Cradle -1/2 HP AC Gear Motor Driven Wheels -Approx. 16" (406mm) from Floor to bottom of "V" Cradle Note: (2) Coil Cars a
      1/2" (14mm) - 2.36" (60mm), OCN Model SR 50D BAR CHAMFERING MACHINE (13842)
      MACHINE #13842 SPECIFICATIONS: MANUFACTURER: OCN SPA (ITALY) MODEL No.: SR 50D YEAR OF MANUFACTURE: 2011 TYPE: AUTOMATED CHAMFERING AND LOADING MACHINE FOR BARS PREVIOUS USE: BRASS LENGTH OF BARS: 2m - 5m (6.5 - 16.4 FT.
      Grieve 50" x 50" x 50" #HC-850 Batch Oven, 850F
      Grieve 50" x 50" x 50" #HC-850 Batch Oven, 850F, with shelves, 230 Volt, 60 KW, Partlow round chart temperature control, powered exhaust, excellent condition.
      • Chamber width: 50"
      • Chamber length: 50"
        Infratrol (Grieve) Walk-in 60" x 84"H x 96"L, 500F, Gas Fire
        Infratrol (Grieve) Walk-in Oven, 60" x 84"H x 96"L, 500F, Gas Fired, powered exhauster, Watlow EZ_ZONE temperature controls, aluminized steel interior, mfg. 2013 - Excellent condition. We have two ident
        • Chamber width: 60"
        • Chamber length: 96"
          Precision Quincy Walk-in, 60" x 84"H x 96" 750F Gas Fired
          Precision Quincy Walk-in oven model 92-750B GAS, 60" x 84"H x 96" 750F Gas Fired, solvent rated (Class A oven), aluminized steel interior, Honeywell UDC control, mfg 2004.
          • Chamber width: 60"
          • Chamber length: 96"
            2 1/4", ABBEY ETNA, No. 196, 2 DIE ROTARY SWAGER, 6" DIE LENGTH (13815)
            MACHINE 13815 Series 190 Catalog Specifications Max Tube Capacity: 2.25" (2.25" is for light gauge tube only) Max Solid Capacity: .875" Diameter of Cage Roll: 2.125" Number of Rolls:
            2"(50.8mm) ABBEY ETNA, No. 206, SOLID CAPACITY 1" (25.4mm) SWAGER (13813)
            MACHINE 13813 MANUFACTURER................................ABBEY ETNA CO TYPE SWAGER.................................ROTARY SERIAL .................................... 1847 MODEL ..................................... 206
            1 3/4", STANDARD/FENN, No. 3A, 2 DIE ROTARY, 3/8" SOLID (13822)
            MACHINE #13822 One used 1-3/4" STANDARD MODEL #3A, 2-DIE SWAGER CAPACITY: TUBE .............. 1-3/4" SOLID ............. 3/8" DIAMETER THRU HOLE .......... 1-7/8" MOTOR DATA: 5 HP, 3/60/220/440, 1140 RPM WITH CONTROLS OV
            Condition:
            • X Used (590)
            Location:
            • X Connecticut (590)
            Price:
            •  to 
            1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>