buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Used > Ohio

Used Machine Tools in Ohio

1249 used machine tools items for sale in Ohio
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 1 - 20 of 1249 matches
Sort by:
Items Per Page:  20  |  50 |  100
4" UNION TABLE TYPE HORIZONTAL BORING MILL W/ ROTARY TABLE
$RFQ
4" UNION TABLE TYPE HORIZONTAL BORING MILL W/ ROTARY TABLE
ONE (1) USED 4" UNION TABLE TYPE HORIZONTAL BORING MILL W/ ROTARY TABLE MODEL: BFT90/3 NEW: 1990 SPECIFICA
  • Spindle diameter: 4"
  • X axis travel: 63"
    5,000 Lb. x 18″ FEED LEASE CORPORATION Single Uncoiler
    $RFQ
    5,000 Lb. x 18″ FEED LEASE CORPORATION Single Uncoiler
    Stock #3705 Capacity: 5,000 Lbs Max Width: 18″ ID Range: 16″ – 20″ Max OD: 60″ Equipped With: - Manual Brake - Manual Expansion 3-Arm - (2) Coil Keepers Dimensions: 4′ x 4′ x 5′ Approx Weight: 1000 Lbs Locatio
    • Maximum weight capacity: 5000Lb
    • Maximum coil width: 18"
      2,500 Lb. x 18″ LITTELL #25-18 Double Uncoiler
      $RFQ
      2,500 Lb. x 18″ LITTELL #25-18 Double Uncoiler
      Stock #3706 Model #25-18 Serial #S-4143-72 Capacity: 2500 Lbs. Per Side Max OD: 48″ Max Width: 18″ ID Range: 15″ – 20″ Equipped With: - Electric Brakes - Manual Expansion 4-Arm - Manual Rotation - Adjustable B
      • Maximum weight capacity: 2500Lb
      • Maximum coil width: 18"
        2,500 Lb. x 12″ COOPER WEYMOUTH #2500-12DP Double Uncoiler
        $RFQ
        2,500 Lb. x 12″ COOPER WEYMOUTH #2500-12DP Double Uncoiler
        Stock #3707 Model #2500-12DP Serial #250012DP2290 Capacity: 2,500 Lbs Per Side Max OD: 60″ Max Width: 12″ ID Range: 15″ – 20″ Equipped With: - Manual Brakes - Manual Expansion 3-Arm - Manual Rotation - (11) Co
        • Maximum weight capacity: 2500Lb
        • Maximum coil width: 12"
          10,000 Lb x 30″ ROWE #10030-DSV-DE Double Uncoiler
          $RFQ
          10,000 Lb x 30″ ROWE #10030-DSV-DE Double Uncoiler
          Stock #3710 Model #10030 – DSV – DE Serial #28789 Capacity: 10,000 Lbs Per Side Max OD: 72″ Max Width: 30″ ID Range: 16″ – 20″ Equipped With: - 4-Arm Electrical Expansion - Air Brakes - Air Operated Pin Lock -
          • Maximum weight capacity: 10000Lb
          • Maximum coil width: 72"
            9,000 Lb. x 30″ Accra Wire Pallet Decoiler
            $RFQ
            9,000 Lb. x 30″ Accra Wire Pallet Decoiler
            Stock #3711 Model #F-403 Serial #F-4031014051 Weight Capacity: 9000 Lbs Max OD: 72″ Strip Width: 1/2″ – 30″ Control: ACCRA Flex System 220V, Single PH, 20 Amps Drive System: Direct Chain Driven DC Regenerative D
            • Maximum weight capacity: 9000Lb
            • Maximum coil width: 30"
              10,000 Lb. x 36″ EGAN PressPartner M1001-36 Single Uncoiler
              $RFQ
              10,000 Lb. x 36″ EGAN PressPartner M1001-36 Single Uncoiler
              Stock #3712 Model #M1001-36 Serial #2759 Weight Capacity: 10,000 Lbs Max Width: 36″ ID Range: 16″ – 20″ Max O.D.: 72″ Equipped With: - Manual 4-Arm Expansion - Electric Brake - Motorized Inch Up Drive w/Hold Do
              • Maximum weight capacity: 10000Lb
              • Maximum coil width: 36"
                6″ PRESS ROOM EQUIPMENT 7-Roll Flattener
                $RFQ
                6″ PRESS ROOM EQUIPMENT 7-Roll Flattener
                Stock #3714 Model #PPR-MD-06-DCS Serial #01098-06 Max Strip Width: 6″ Roll Dia: 1.5″ Work Rolls: 7-Roll (3 Over 4) Pass Line of Strip: 42″ Direction: R– L Equipped With: Electrical Control Panel, Dancer Arm Dime
                (2) CAST IRON T-SLOTTED ANGLE PLATES, Overall Width 18", Overall Heigh
                $RFQ
                (2) CAST IRON T-SLOTTED ANGLE PLATES, Overall Width 18", Overall Heigh
                Set of (2) Cast Iron T-Slotted Angle Plates Overall Width is 18", Overall Height is 60", Base is 18", Vertical T-Slotted Face is 18" x 18".
                CAST IRON TWO-SIDED TOMBSTONE,Overall Width 26",Overall Height 40"
                $RFQ
                CAST IRON TWO-SIDED TOMBSTONE,Overall Width 26",Overall Height 40"
                Cast Iron Two-Sided Tombstone Both Sides have 4" x 4" Blocks, One Side Has (4) Threaded holes per Block the other Side does not, Overall Width 26", Overall Height 40", 14" Base.
                (2) CAST IRON T-SLOTTED ANGLE PLATES, Overall Width 1', Overall Height
                $RFQ
                (2) CAST IRON T-SLOTTED ANGLE PLATES, Overall Width 1', Overall Height
                Set of (2) Cast Iron T-Slotted Angle Plates T-Slots Every 5", Overall Width is 1',Overall Height is 3', Base is 18".
                Kingston Lathe, 40" Swing Over Bed, 31" Swing Over Cross Slide, 2
                $RFQ
                Kingston Lathe, 40" Swing Over Bed, 31" Swing Over Cross Slide, 2
                40"/ 50-3/8" x 200" KINGSTON GAP BED ENGINE LATHE Model HR5000, New 2000 Stock# K15664 EQUIPPED WITH: Heidenhain 2-Axis Digital Readouts,
                • Swing: 40"
                • Centers: 200"
                  8" x 20" GMN, Model MPS3, 9"x20" Grinding Capacity, Aut
                  $RFQ
                  8" x 20" GMN, Model MPS3, 9"x20" Grinding Capacity, Aut
                  8" x 20" GMN (Georg Muller Nurnberg) VERTICAL SPINDLE RECIPROCATING SURFACE GRINDER Model MPS 3, S/N 9305, New 1982 Stock# K15634
                  • Table width: 7.5"
                  • Table length: 27.5"
                    Haas VF-6/50, Haas CNC Control, 64"x28" Table, X=64", Y=32&q
                    $RFQ
                    Haas VF-6/50, Haas CNC Control, 64"x28" Table, X=64", Y=32&q
                    HAAS VF-6/50 CNC VERTICAL MACHINING CENTER Model VF-6/50, S/N 45367, New 5/2006 Stock# K15674 EQUIPPED WITH: Haas 32-Bit CNC Control w/C
                    • X axis: 64"
                    • Y axis: 32"
                      Mori Seiki SH-503, Fanuc 16i, (2) 20" Pallets, X=24.8", Y=23.6&qu
                      $RFQ
                      Mori Seiki SH-503, Fanuc 16i, (2) 20" Pallets, X=24.8", Y=23.6&qu
                      MORI SEIKI SH-503 CNC HORIZONTAL MACHINING CENTER Model SH503, S/N AD1962, New 2002 Stock# K15675 EQUIPPED WITH: MSG-502 CNC Control (Fanuc 16i), Synchronized Tapping, RS
                      • X axis: 24.8"
                      • Y axis: 23.6"
                        Hardinge GS-51MS,Fanuc Oi,Collet Chks,18"Max Swng,10"Mach Dia,16&
                        $RFQ
                        Hardinge GS-51MS,Fanuc Oi,Collet Chks,18"Max Swng,10"Mach Dia,16&
                        HARDINGE GS-51MS CNC TURNING CENTER with LIVE TOOLING and SUB-SPINDLE Model GS-51MS, S/N BLBB6D0012, New 2016 Stock# Q10366 EQUIPPED WITH:
                        • Swing: 18"
                          DOOSAN PUMA 300LC, Fanuc 21i,23" Swing,12" Chk, Tailstock w/52&qu
                          $RFQ
                          DOOSAN PUMA 300LC, Fanuc 21i,23" Swing,12" Chk, Tailstock w/52&qu
                          DAEWOO PUMA 300LC CNC TURNING CENTER Model Puma 300LC, S/N P30L2969, New 2008 Stock # K15676 EQUIPPED WITH:
                          • Swing: 23"
                          • Centers: 52"
                            DOOSAN PUMA 300C, Fanuc 21i, 23"Swing, 12"Chk, Tailstock w/27&quo
                            $RFQ
                            DOOSAN PUMA 300C, Fanuc 21i, 23"Swing, 12"Chk, Tailstock w/27&quo
                            DAEWOO PUMA 300C CNC TURNING CENTER Model Puma 300C, S/N PM302145, New 2006 Stock # K15677 EQUIPPED WITH: F
                            • Swing: 23"
                              Thermal Transfer #rRM-IN, heat exchanger, 150 psi, 10 HP, 350°F, #6543P
                              $RFQ
                              Thermal Transfer #rRM-IN, heat exchanger, 150 psi, 10 HP, 350°F, #6543P
                              Basic Information Model: RM- IN Manufacturer: Thermal Transfer Serial #: 8066 Location: Painesville, OH Year Built: - Specifications Max. PSI Rating: 150 Temperature Rating: 350 Degrees F O
                              10000 lb. Rowe # 10050-DSJ/BGY-12 , Coil Reel & Travel Coil Car, 50" coil W, 60"
                              $RFQ
                              10000 lb. Rowe # 10050-DSJ/BGY-12 , Coil Reel & Travel Coil Car, 50" coil W, 60"
                              no description provided
                              Categories:
                              Condition:
                              • X Used (1249)
                              Manufacturer:
                              Location:
                              • X Ohio (1249)
                              Price:
                              •  to 
                              1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>