buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Wire Machinery > Used

Used Wire Machinery For Sale

590 used wire machine items for sale
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 1 - 20 of 590 matches
Sort by:
Items Per Page:  20  |  50 |  100
0.105" (2.7mm) VAUGHN, Finish Capstan 12 inch, finish hi carbon 0.317" (13718)
MACHINE 13718 Vaughn Model HIC Finish Capstan 12 inch Enter .105" (2.667mm) low carbon, Finish .0475" (1.2mm) Enter .080" (2mm) high carbon, Finish .0317" (0.8mm) Speed 3000 fpm There is motor no controls and no spooler.
0.080" (2mm) - 0.0226" COULTER MCKENZIE, 8 DRAFT WET TYPE WIRE DRAWER (13716)
MACHINE 13716 Coulter McKenzie Wire Drawer 8 draft 14" Block 12" High 40 HP 480 volt 60 Amp Self Contained: 100 gal tank with coolant sump pump Finish Die Cast and helix adjuster .080 (2mm) start .0285 (0.7239mm) Finish
0.050" Morgan Fine Wire Wet Draw. Mdl 18WR21, IR8B. 4 -Block,21 Draft, (13717
MACHINE 13717 Morgan Fine Wire Wet Drawing. Model 18WR21 + IR8B. 4 -Block 21 Draft 2500 FPM .050" (1.27mm) - .005" (0.127mm) 30 lb spoolers attached. 480 volt Five (5) available (Price is per machine) **Temporary Specifi
22" (558mm), BARRON & CROWTHER, SINGLE DIE BULL BLOCK (13719)
MACHINE# 13719 SPECIFICATIONS: MANUFACTURER: BARRON AND CROWTHER (U.K.) LTD. TYPE: SINGLE DIE VERTICAL WIRE DRAWING BLOCK BLOCK DIAMETER: 22" (558mm) AT BASE; 21" (533mm) AT TOP BLOCK HEIGHT:
13 GROOVE CONTINUOUS WIRE POINTER (13692)
MACHINE 13692 TYPE: CONTINUOUS WIRE POINTER NUMBER OF GRROVES: 13 Capacity: 3/8" - 0.060" copper/aluminum 1/4" - 0.060" Steel Power: Wired for 220
1.25" (31.75mm) VAUGHN MODEL #22 DOUBLE DECK BULL BLOCK WIRE DRAWER (13695)
MACHINE #13695 Specifications: MANUFACTURER ................ VAUGHN MACHINE COMPANY USA TYPE MACINE ................. DOUBLE DECK WIRE DRAWING BLOCK MODEL ....................... #22 STYLE ....................... DOUBLE
8 SPINDLE 4 STATION PROGRESSIVE MODEL #DS104-LH TRAVERSING SPOOLER (13690)
MACHINE 13690 SERIAL ................ 6620104 MODEL ................. DS104-LH NUMBER OF SPINDLES .... 8 CAPACITY .............. .063 - .120 PITCH ................. .26" MAX FPM ............... 406 MIN FPM ..............
.312" RMG 15 WIRE STRAIGHTEN AND CUT, 400 FPM, 6' MAX CO, 3"
.312" RMG 15 CLUTCHLESS WIRE STRAIGHTEN & CUT MACHINE WIRE DIAMETER RANGE: .062" - .312" MAXIMUM CUTOFF LENGTH: 6' MINIMUM CUTOFF LENGTH: 3" MAX. FEED SPEED: 400 FPM LENGTH TOLERANCE: +/- .005" ELECTRICS: 230
  • Wire diameter: 0.312"
  • Wire diameter: 0.312"
  • Maximum cut length: 72"
    1/2" RMG MODEL 28 CLUTCHLESS STRAIGHTEN & CUT MACHINE
    1/2" RMG MODEL 28 CLUTCHLESS STRAIGHTEN AND CUT MACHINE WIRE DIAMETER RANGE: .125" - .500" (3.18mm - 12.7mm) LENGTH RANGE: 3" - 6' PRODUCTION SPEED: 400 FPM (3 CUTS PER SECOND) LENGTH TOLERANCE: +/- .005" MAX. T
    • Wire diameter: 0.5"
    • Wire diameter: 0.5"
    • Maximum cut length: 72"
      8" (203mm) x 4" (101mm), TORRINGTON, 3 STAND TANDEM WIRE FLATTENING LINE (13642)
      MACHINE 13642 Manufacturer: Torrington Manufacturing Co Number of Stands: 3 1st Stand Roll Diameter: 8" (204mm) x 6" (152mm) Drive Motor: 60 HP AC Gear Box:
      8" (203mm) x 3" (76mm), FENN, 2 STAND TANDEM MILL W/4U FENN TURKS HEAD (13641)
      MACHINE 13641 Manufacturer: Fenn Manufacturing Co USA Type Mill: 2 Stand Tandem Wire Flattening/Shaping Line 1st Stand Roll Diameter: 10" (254mm) x 5" (127mm) Drive Motor:
      3 3/8" (85mm) x 1 3/8" (35mm), BUEHLER, SINGLE STAND MILL (13634)
      MACHINE #13634 MANUFACTURER: BUEHLER & CO GmbH General data Roll diameter: 85mm (3.350") Roll Width: 35mm (1.377") Screwdowns: Powered El
      No. SE-13-01-SL, HENRICH, 13 DIE ROD BREAKDOWN LINE (13637)
      MACHINE #13637 SPECIFICATIONS -MANUFACTURER: HENRICH -MODEL: M-85.11.A -TYPE: SE-13-01-SL ROD BREAKDOWN LINE -CAPACITY -MATERIAL: COPPER -ENTRY:
      .375" RMG Model 16 Wire Straighten & Cut Machine, 16' Max CO L
      .375" RMG Model 16 Wire Straighten & Cut Machine - Excellent Condition Factory Clutchless Retrofit 2011 Left to Right Wire Flow Single Offset Arbor Spare Tooling Manual Available Diameter Range: .062" - .375" Max
      • Wire diameter: 0.375"
      • Wire diameter: 0.375"
      • Maximum cut length: 192"
        5/16" (7.9mm) - 0.062" (1.6mm) LEWIS, No. 2SV5, WIRE STR & CUT OFF (13627)
        MACHINE 13627 MANUFACTURER: LEWIS MACHINE CO TYPE MACHINE: WIRE STRAIGHTEN AND CUT OFF MODEL: 2SV5 CAPACITY: 0.062" - 0.312" (1.5mm - 7.93mm) SPEED:
        2-pin 3D CNC wire forming machine by Fremont Technologies
        2-pin #D CNC wire forming machine, by Fremont Technologies. Auto loader with a bin capable of 60" wire length. Capable of bending up to .320 (8mm) wire. Unit comes with tooling for .3125, .281, .250, .156 wire. This
        • Wire diameter: 0.32"
          7/16" (11mm), VAUGHN, 2 ROLL, FOR WIRE, MIN. 1/8" (3mm), 5 HP. (13593)
          MACHINE #13593 SPECIFICATIONS: MANUFACTURER: VAUGHN MACHINERY CORP. (U.S.A.) TYPE: 2 ROLL CONTINUOUS POINTER FOR WIRE WIRE DIAMETER (STEEL): MAXIMUM: 7/16" (11.11mm) MINIMUM: 1/8" (3.175mm) DRIVE:
          US Baird #2 4 slide
          US Baird 4 slide wire forming machine, with vari-drive motor currently wired for 440, but can be wired for 220. Have several set of straightening blocks, no tooling is sold with the machine.
          1/4" (6.35mm), LEWIS, 4SV16-8, WIRE STRAIGHTEN & CUT OFF (13583)
          MACHINE 13583 1/4" LEWIS Model 4SV16-8 Wire Straightener & Cut-Off Serial Number: 602-10581 AGE: 2002 MODEL NUMBER: 4SV16-8 SPECIFICATIONS: Wire Diameter: .062" to .250" Max. Cut Length: 8' Feed Speed: 65 to 400 FPM
          3/16" (4.76mm), LEWIS, No. 7-D, CAPACITY DOWN TO 1/16" (1.5mm) (13582)
          MACHINE 13582 3/16" LEWIS Model #7-D Wire Straightener & Cut-Off Serial Number: 7D-147 YEAR: 1949 MODEL #: 7D SPECIFICATIONS: Capacity: 1/16" to 3/16" @ Max. 90,000 Tensile 1/16" to 1/8" High Carbon & S.S. Speed: Fixed 1
          Related Subcategories:
          Condition:
          • X Used (590)
          Price:
          •  to 
          1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>