buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Used > Pennsylvania

Used Machine Tools in Pennsylvania

1259 used machine tools items for sale in Pennsylvania
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 1 - 20 of 1259 matches
Sort by:
Items Per Page:  20  |  50 |  100
1997 SOUTHWESTERN INDUSTRIES TRAK DPM 3-AXIS CNC BED TYPE MILL, 10" x
TABLE TABLE SIZE: 50" X 10" T-SLOTS: 5/8" W X 3 NO. X 2-9/16" PITCH MAXIMUM WEIGHT ON TABLE: 1,320 LBS TRAVELS X-AXIS TRAVEL: 31" Y-AXIS TRAVEL: 17" Z-AXIS TRAVEL: 23.5"
  • Table width: 10"
  • Table length: 50"
    1999 DO-ALL MODEL BRM-DEBURRING MACHINE, 2”  - 6”
    SPECIFICATIONS CAPACITY, DIAMETER: 2” - 6” CAPACITY (LENGTH): 2” - 6” BELT SPEED: 2 TO 20 FPM PARTS PER HOUR: 200 TO 600 DRIVE MOTOR: 1/42 HP BELT MOTOR: 1/2 HP UPPER BELT MOTOR: 1/2 HP GENERAL DIMENSIONS,
    • Width: 6"
      REPUBLIC LAGUN AMERICAN TURNMASTER AT-SB-326 GANG TOOL CNC LATHE, 5C
      CAPACITIES SWING OVER BED: 10.63” SWING OVER CROSS SLIDE: 5.12” COLLET: 5C HEADSTOCK SPINDLE BORE: 1.25” MAXIMUM SPEED: 6,000 RPM MAXIMUM RATING: 5 HP COOLANT PUMP: ¼ HP TRAVELS X-AXIS: 15.75” Z-AXIS
      • Swing: 10.63"
      • Centers: 15.75"
        2011 MIYANO BNE-51SY5 6-AXIS CNC LATHE, TWIN TURRET, SUB, LIVE, 2" BAR
        BAR WORK ROUND COLLET CAPACITY: 2” CHUCK WORK CHUCK SIZE (MAIN): 6” CHUCK SIZE (SUB): 4” WORK LENGTH MAXIMUM TURNING LENGTH: 3.54” MACHINING CAPACITY MAXIMUM TURNING DIAMETER (MAIN): 6” MAXIMUM TURNING DIA
        • Swing: 20"
          1980 CLAUSING COLCHESTER MODEL 8015 GEARED HEAD, BED LATHE, 13" X 40&q
          SPECIFICATIONS SWING OVER BED: 13" SWING OVER SADDLE WINGS: 13" SWING OVER CROSS SLIDE: 8-1/4" BAR CAPACITY THRU SPINDLE: 1-5/8" DISTANCE BETWEEN CENTERS: 40" SPEEDS (16): 30 – 2,500 RPM U
          • Swing: 13"
          • Centers: 40"
            USED MONARCH MODEL EE TOOLROOM  LATHE, 12" X 20"
            SPECIFICATIONS SWING OVER BED: 12-1/2" SWING OVER CROSS SLIDE: 7-1/4" DISTANCE BETWEEN CENTERS: 20" HOLE THROUGH SPINDLE: 1-3/8" TAILSTOCK TRAVEL: 4" TAILSTOCK TAPER: 2MT SPINDLE SPEEDS,
            • Swing: 12"
            • Centers: 20"
              USED K O LEE MODEL BA900 TOOL GRINDER, 5.25” X 27.25”
              SPECIFICATIONS DISTANCE BETWEEN TAILSTOCKS: 22” TABLE WORKING SURFACE: 5-1/4” X 27-1/4” SUB TABLE: 8” X 36” TOTAL CROSS FEED: 7-1/4” FEED EACH REVOLUTION OF HAND WHEEL: .100” TABLE TRAVERSE: 14” SWING OVER TA
              .250" SHUSTER 1 AVS5 WIRE STRAIGHTEN & CUT MACHINE, 7'6"
              SHUSTER 1AVS 5 WIRE STRAIGHTEN & CUT MACHINE MAXIMUM CUTOFF LENGTH: 7'6" BASIC WIRE DIAMETER: .062" - .250" / .062" - .187" SPEED: 20 TO 250 FPM APPROXIMATE MACHINE WEIGHT: 2,000
              EVERETT CUT OFF SAW
              EVERETT CUT OFF SAW
              3/16" FASTENER ENGINEERS MODEL WR-01-16 WIRE DRAWER
              3/16" FASTENER ENGINEERS MODEL WR-01-16 WIRE DRAWER MAXIMUM WIRE DIAMETER: 3/16" CAPSTAN: 16" MOTOR: 1 HP SPEED RANGE: 6-55 FPM ELECTRICS: 480 VOLTS
              2016 KALAMAZOO MODEL K10SW WET ABRASIVE SAW, 10” WHEEL
              SPECIFICATIONS SPINDLE SPEED: 2,300 RPM MOTOR: 3 HP SPINDLE ARBOR: 5/8” ABRASIVE WHEEL: 10” GENERAL DIMENSIONS: 36” X 26” X 62” ELECTRICAS: 220 VOLTS, 1 PH WEIGHT: 300 LBS EQUIPPED WITH 10 GALLON
              • Blade diameter: 10"
                2005 TOS MODEL SN710S/4000 UNIVERSAL CENTER GAP BED LATHE, 28" X 160&q
                WORKING CAPACITY SWING OVER BED: 28.3" SWING OVER CROSS SLIDE: 16.9" SWING IN GAP: 37.8" DISTANCE BETWEEN CENTERS: 156.7" MAXIMUM WEIGHT OF WORKPIECE: 3,306 LBS WIDTH OF GAP IN FRONT OF FACEPLAT
                • Swing: 28"
                • Centers: 160"
                  USED TECHNICA MODEL ZSM-150 CENTER HOLE GRINDER, 2” X 43”
                  SPECIFICATIONS CONE ANGLE TO GROUND CENTER HOLES: 60° MAXIMUM DIAMETER OF GROUND CENTER HOLES: 2” MAXIMUM DIAMETER OF WORKPIECE: 5” MAXIMUM WORKPIECE LENGTH: 43” HEADSTOCK AXIS TO COLUMN FACE: 6” GRINDIN
                  • Grinding wheel diameter: 2"
                  • Maximum length: 43"
                    2013 BAYKAL MODEL APH-3104 HYDRAULIC PRESS BRAKE, 10’ X 90 TON
                    SPECIFICATIONS CAPACITY: 90 TON BED LENGTH: 122” BETWEEN HOUSINGS: 100” STROKE: 6.3” OPEN HEIGHT: 12” BED HEIGHT: 34.2” THROAT: 16.1” MOTOR: 10 HP RAM SPEED APPROACH: 244 IPM BEND: 24 IPM RETURN: 188 IPM
                    • Tonnage: 90T
                      1998 HYD MECH MODEL S 20 SERIES II MANUAL CUT OFF SAW, 13" X 18"
                      RECTANGLE CAPACITY: 13" X 18" ROUND CAPACITY: 13" DIAMETER 45° ROUND CAPACITY: 12" DIAMETER 45° SQUARE CAPACITY: 10" X 10" BLADE: 13' 6" L X 1" W X .032" THI
                      • Width capacity: 18"
                      • Height capacity: 13"
                        HARRISON MODEL M500 GAP BED GEARED HEAD ENGINE LATHE, 21" X 80"
                        SWING OVER BED: 21" DISTANCE BETWEEN CENTERS: 80" SWING OVER CROSS SLIDE: 14-1/2" CENTER HEIGHT: 10-1/4” IN GAP DIAMETER: 28-3/4” IN GAP LENGTH: 7” HEADSTOCK SPINDLE BORE: 3-1/8” NOSE: D1-8 CAMLO
                        • Swing: 21"
                        • Centers: 80"
                          CINCINNATI MODEL 1810 MECHANICAL SHEAR, 10’ x 1/4”
                          SPECIFICATIONS THICKNESS: 1/4” LENGTH: 10’ DISTANCE BETWEEN HOUSINGS: 10’3” MOTOR: 7 HP SPEED: 60 SPM FLYWHEEL SPEED: 1,200 RPM FRONT GAUGE RANGE: 47” BACK GAUGE RANGE: 36” HOLD DOWNS TO KNIFE EDGE: 5/8&quo
                          AIM AFC 6 3D CNC WIRE FORMER, .080" - .250" WIRE DIA
                          AIM AFC 6 3D CNC WIRE FORMER - 2016 MACHINE EXCELLENT CONDITION WIRE DIAMETER RANGE: 2mm - 6.4mm (.080" - .250") MAX TENSILE AT MAX DIAMETER: 80 KPSI FEEDER AXIS #1 RESOLUTION: .001mm MAX WIRE SPEED: 7
                          • Wire diameter: 0.25"
                            #2 OMV CENTERLESS GRINDER - FILMATIC GRINDING WHEEL SPINDLE
                            #2 OMV CENTERLESS GRINDER FILMATIC GRINDING WHEEL SPINDLE WORK DIAMETER CAPACITIY: 0 - 4.5" GRINDING WHEEL SIZE: 20" DIAMETER X 8" WIDE MAX WEIGHT: 8500 LBS APPROX
                            • Maximum workpiece diameter: 4.5"
                            • Grinding wheel diameter: 20"
                              .312" RMG MODEL 15 WIRE STRAIGHTEN & CUT MACHINE, 400 FPM
                              .312" RMG MODEL 15 WIRE STRAIGHTEN & CUT MACHINE WIRE DIAMETER RANGE: .062" - .312" MAXIMUM CUTOFF LENGTH: 10' MINIMUM CUTOFF LENGTH: 3" MAXIMUM FEED SPEED: 400 FPM LENGTH TOLERANCE:
                              • Wire diameter: 0.312"
                              • Maximum cut length: 120"
                                Condition:
                                • X Used (1259)
                                Location:
                                • X Pennsylvania (1259)
                                Price:
                                •  to 
                                1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>