buy & sell, new & used machinery, machine tools & equipment

Woodworking Equipment

Woodworking Equipment For Sale

870 new & used woodworking equipment items for sale
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9
Refine: Viewing 1 - 100 of 870 matches
Sort by:
Items Per Page:  20 |  50 |  100
Used Edlund 4F12 Drill Press
Specifications: Model .......................................................................................................... 4F12 Depth Of Throat ....................................................................
Used Rockwell/Delta 15” Drill Press, Model 15-655
Specifications: Throat Depth ................................................................................................. 7.5” Column Diameter ......................................................................
Cab Saw 10x52 3/1 LT PM66
Cabinet Saw 10 x 52 3/1 Left Tilt PM66 Model: PM66 [Powermatic] S/N: 93661956 Left Tilt w/Router Table & Router 3Hp; 1Ph; 240Volt
Lathe 12" B/T - Delta
Lathe 12" Bench Top - Delta Model: 46-700 [Delta] S/N: 91J84138 Bench Top; Cupped Center; Spur Drive; 12" Tool Rest
Miter Gauge for TableSawDelta
Miter Gauge for Table Saw Delta Model: 34-925 [Delta] for Delta 12-14" Table Saw; Miter Slot Bar=24" x 1-1/4" x 1" x 7/16"
Boring Machine Hor 2sp Newton
Boring Machine Horizontal 2spindle Newton Model: B100 [Newton]; Motor [Baldor] S/N: 70084 Horizontal; 2 Spindle 1hp, 1ph, 120Volt
Jointer 6" C/S Powermatic
Jointer 6" Closed Stand Powermatic Model: 054 [Powermatic] S/N: 9554532 3/4hp; 1ph; 115/230volt
Pocket Hole Mach Flr Pneu-Kreg
Pocket Hole Machine Floor Pneumatic-Kreg Model: DK1100 [Kreg] Single Spindle; Pneumatic Hold Down Cylinder; Pneumatic Motor
Brandt KD78/2C Edge Bander
2000 Brandt KD78/2C edg bander 2 1/2 hp corner round motors Top/Bottom scraping unit 2-6 mm radius pneumatically controlled, blow off nozzles, Top/Bottom Buffing units with 2 1/4 hp motors, All trimming controlled by P
Cont Saw 10" w/MblBs Rigid
Contractor Saw 10" w/Mobile Base Rigid Model: R4512 [Rigid] S/N: EM152972322 w/Mobile Base; Inserts; Miter Gauge; Dado Set 13Amp; 1Ph; 120Volt
Mortiser Bench Top Delta
Mortiser Bench Top Delta Model: 14-650 [Delta] S/N: P9728 w/6 Chisels 1/2hp, 1ph, 120volt
Grinder 8"Bench w/Variable Spd
Grinder 8" Bench w/Variable Speed Variable Speed w/Lathe Sharpening Jig
Dovetail Jig 24" w/15 Rtr Bits
Dovetail Jig 24" w/15 Router Bits Model: D4 [Leigh] S/N: D415460 w/15 Straight & Dovetail Router Bits
Lathe 12"x36" w/stand-Jet
Lathe 12" x 36" w/stand-Jet Model: 708352 JWL-1236 [Jet] S/N: 6125933 w/Mobile Base; 13 Lathe Chisels; 12" Rest; Chuck w/Extra Jaws 3/4Hp; 1Ph; 115Volt
SANDINGMASTER #SCSB-900 THRU FEED BELT SANDER
SANDINGMASTER #SCSB-900 THRU FEED BELT SANDER EQUIPPED WITH: VARIABLE SPEED CONVEYOR VARIABLE SPEED SANDING BELT 480 VOLTS WGT: PRICE: FOB BROOK PARK, OH - - - $ 4,250 SUBJECT TO PRIOR SALE
Cab Saw 10 5/3 RT w/MblBs Dlt
Cabinet Saw 10" 5/3 Right Tilt w/Mobile Base Delta Model: 34-807 Unisaw [Delta] S/N: 90H55533 w/Mobile Base 5Hp; 3Ph; 208Volt
Jointer 6" hlcl cttrhd MblBs-G
Jointer 6" Helical Cutterhead Mobile Base - Grizzly Model: G0654 [Grizzly] S/N: GJ654-0875 w/Mobile Base & Helical Head 1Hp; 1Ph; 110Volt
Planer 12" BT w/Mbl Stand
Planer 12" Bench Top w/Mobile Stand Model: 2012NB [Makita]; DW7350 [Dewalt] S/N: 00079505 w/Dewalt Mobile Stand, Wixey DRO & Helical Head 15Amp; 1Ph; 120Volt
Hebrock model Top 2000 plus
Hebrock top 2000 plus made in Germany, 3mm min/max work piece thickness 8-50 mm min work width 90mm feed speed 10m/min, units (end trim) (top/bottom trim) (surface scraper) machine has low usage and is in excellen
Used 2004 12" challenger CH100-3022-SR grinder
Used 2004 12" challenger CH100-3022-SR grinder. 22 kW, 30HP 480v, 3PH head motor (28) Small cutters P96-i110 150:1 drive ½” at one section screen 1.5 kW feed roll motor 12” wide x 5” high horizontal inlet V
Used Grizzly G1018 8" Jointer w/Hermance HelixHead
Used Grizzly G1018 8" Jointer w/Hermance HelixHead. Almost new Hermance HilixHead replaces the old 3 knife cutter head Powerful 1-1/2 H.P., 220V single phase motor easily plows through hardwoods 220V magnetic s
Miter Gauge 2000 Incra
Miter Gauge 2000 Incra Model: 2000 [Incra] Miter Gauge with 27" & 52" Fence & Two Stops (Shop Stop & Flip Shop Stop)
Dado 8"x24T 5/8"b Super Freud
Dado 8" x 24T 5/8"b Super Freud Model: SD508 [Freud] 29/32 Max Cut Dado Cut 8" 24 Tooth w/6 4-Wing Chippers
Outfeed Table-Delta
Outfeed Table-Delta Model: 50-302 [Delta] 34" x 43" Outfeed Table
Blade Guard 50" OA Brett-HTC
Blade Guard 50" Over Arm Brett-HTC Model: 10AM50 [HTC] 50" Capacity Over Arm Blade Guard for 10" Blade
Osc Spindle Sander BT Rikon
Oscillating Spindle Sander Bench Top Rikon Model: 50-300 [Rikon] S/N: 201609145 Floor Mount w/1/2", 3/4", 1", 1-1/2", & 2" Spindles 1/2Hp; 1Ph; 110Volt
Router Table/Cabinet w/Router
Router Table/Cabinet w/Router Model: Custom Table; PC7518 Router [Porter Cable] S/N: 949137 Router Table/Cabinet (27" x 43") w/Wheels, Fence, 9-Drawers; Router Lift; Porter Cable Router 3-1/4Hp; 1Ph; 115Vo
Drill Press 18" VS 1hp PM2800B
Drill Press 18" Variable Speed 1hp PM2800B Model: 1792800B PM2800B [Powermatic] S/N: 14090511 Variable Speed w/Laser 1Hp; 1Ph; 115/230Volt
Dovetail Machine 1hp 115v PM
Dovetail Machine 1hp 115v PM Model: 1791304 DT-45 [Powermatic] S/N: 0409DT45144 12" Dovetail Machine w/Mobile Base 1Hp; 1Ph; 115/230Volt
Sander Edge Osc 9"x138-3/4"-PM
Sander Edge Oscillating 9" x 138-3/4" - PM Model: 1791282 [Powermatic] S/N: 07100ES9138428 3Hp; 1Ph; 230Volt
16" Delta Radial Arm Saw Model 3561 5 HP 3Ph
Good condition. Previously owned by GTE Corning Glass in Wellsboro PA and used in the maintenance shop. Has a few extra blades with it.
2018 HOMAG MODEL SWT-335-QCH THREE HEAD WIDE BELT SANDER, 54” BELT
Ideal for veneer, lacquer, solid wood, high gloss, solid surface & special effect sanding. SPECIFICATIONS SANDING HEADS: 3 SANDING WIDTH: 53” ABRASIVE BELT: 54”X 103” WORKING THICKNESS: 1/8” – 6.25” FEED S
Tannewitz G series 36" Band saw
Tannewitz G series 36" Band saw 7.5 hp 230 volt 3 phase with short stop electronic motor brake, table size 36" X 37" AUX.table 19" X 16" table tilts very good rubber This has a new rebuilt ele
  • Throat: 36"
  • Blade: 1"
    Used Butfering  Classic 213 CE 2 Head, 52” wide belt sander
    Used Butfering Classic 213 CE 2 Head, 52” wide belt sander. First head smooth calibrating drum, excludable from the control panel. Second head combination drum/pad with helically grooved rubber contact roller and pa
    Drawer box clamp
    Custom built drawer box clamp table size 38” x 6f 36” tall, 4 Pnuematic clamps 9” tall each push button controlled nice clamp very well built and affordable
    DustHog Model SFC4-2-DD,2100 CFM, 5HP, (4)Cartridge Filters, Like New! 2016
    DustHog PARKER UAS CARTRIDGE TYPE DUST COLLECTOR Model SFC4-2-DD, S/N 60072662, New 2016 Stock# K15706 EQUIPPED WITH: Uses (4) 33-10089 Filters , 5 HP Fan Mo
    • Motor: 5HP
      Lathe 16/24 II Nova
      Lathe 16/24 II Nova Model: 1624 II [Nova] S/N: 022208 w/Stand, 2-12" Tool Rests; 3" Face Plate; 2-Live Centers; Tool Rest Extension; Drill Chuck w/Taper; 1-Chisel & G3 Chuck w/Extra Jaws 1hp; 1ph; 115vo
      Lathe 12"x16" w/stand-Nova
      Lathe 12"x16" w/stand-Nova Model: Comet II [Nova] S/N: 14280 Midi Lathe w/Stand & Five Chisels 3/4hp; 1ph; 115volt
      Cab Saw 10x25 1.5/1 RT Grizzly
      Cab Saw 10x25 1.5/1 Right Tilt Grizzly Model: G1022 [Grizzly] S/N: 004400 10" Cabinet Saw w/25" Fence Right Tilt 1.5hp; 1ph; 110/220volt
      Delta RT40 table saw
      Delta RT40 table saw 7.5 hp 230/460 volt 3phase table size 57” x43-1/2” tilting blade heavy duty rip fence 14” blade new electrics excellent saw
      NBT30 ER32 Collet Chuck without Keyway Tool Holder Cone with Pull Stud
      NBT30 ER32 Collet Chuck without Keyway Tool Holder Cone with Pull Stud and Collet Nut NBT30-ER32-60L Toolholder for BT30 Automatic Tool Changer Spindle This BT Spindle Tooling is BT30 tool holder. Called NBT30 is to
      160x115x17mm Vacuum Suction Pad Pod Covers Top Vacuum Plate for CNC Router
      160x115x17mm Vacuum Suction Pad Pod Covers Top Vacuum Plate for CNC Router Model: 160x115x17mm Same as OEM P/N:4-011-11-0192 These rubber replacement suction plates are working with pod and rail cnc vacuum pods
      100mm Schmalz Vacuum Blocks Cups clamping Pods for Weeke Homag CNC router
      100mm Tall Schmalz Vacuum Pods for Weeke Homag CNC These vacuum pods are 100mm tall, 100mm pods with consoles two circuit vacuum system, as CNC pods for a Weeke Homag CNC, also widely used with Masterwood, Busellato,
      Biesse CNC vacuum pods cups black ball valves and white Locating Ring
      This spare part is the replacement valve & insert and white nylon locating ring on bottom for Biesse vacuum pods. Biesse suction cups are mainly made of 4 parts, including base body, bottom white locating ring, bl
      CNC rubber sealing gasket pads for SCM CNC router Vacuum Suction pods
      These rubber vacuum pods seals and gaskets are for the CNC woodworking centers from SCM/Morbidelli and Greda Sirio 3A AT - woodworking CNC machining centres. Its size 143x143x11mm, suitable for 145 x 145mm SCM vacuum cup
      Edgebander Rubber Pressure Roller Wheels for Edge Banding Machine
      Rubber Pressure Roller Wheels with Bearing for Edgebanders Edge Banding Machine This rubber roller is one of the Edge banding machine accessories. It is edge conveyor roller, also called pressure roller. The edge ban
      Edge Bander Conveyor Chain Track Pads for BIESSE SCM IMA HOMAG Edgebanding
      Conveyor Chain Track Pads for BIESSE SCM IMA HOMAG Edgebanding Edge Bander Edgebander Machine These rubber tracking pads for conveyor chain, widely use on edgebanders, such as BIESSE, SCM, IMA, Homag, Brandt, KDT and
      CNC router rubber Pads Cover suction plate for Schmalz Vacuum Cups pods
      CNC router Vacuum rubber Pads Cover suction plate for CNC Vacuum Cups pods CNC Vacuum Pad Cover Vacuum Cups and Pods Rubber Replacement Plates for CNC Routers This rubber vacuum suction cup is the replacement pla
      SCM Morbidelli CNC Vacuum Pods  suction cups for Point to Point CNC Router
      SCM Morbidelli CNC Vacuum Pods suction cups for Point to Point CNC Router These CNC vacuum pods and cups are for SCM / Morbidelli CNC routers and Greda Sirio 3A AT - woodworking NC-machining centres, replacement vacu
      BIESSE CNC Vacuum Suction Pods cups for Biesse Rover CNC Routers rail cnc
      CNC Vacuum Suction replacement Pods for Biesse Rover CNC Routers These vacuum pods and cups are for Biesse CNC routers, replacement pod for using with Biesse Rover, Biesse Point to Point machines. With these cnc vacu
      HSK 63F tool holder fork toolholder clip for HOMAG WEEKE VANTAGE CNC Router
      HSK 63F tool holder fork toolholder clip for HOMAG WEEKE VANTAGE CNC Router HSK63F CNC Gripper Forks for HOMAG WEEKE CNC Router Machining Centre VANTAGE HSK 63F tool forks for WEEKE VANTAGE CNC Router This plastic
      Laguna black automatic tool changer bt30 tool holder clips tool gripper
      Laguna black automatic tool changer bt30 tool holder clips tool gripper BT30 CNC Tool Finger Plastic Holding Tools Magazine Holder BT30 Plastic Holding Tool Replacing Finger This plastic holding tool is the BT30
      ISO30 CNC tools ATC Tool Holder Forks ISO30 tool fork Plastic Tool Fingers
      ISO30 ATC Tool Holder Forks HSD Tool Fork Plastic Tool Holder Finger ISO30 tool holder finger also called ISO30 tool cradle, ISO30 Tool Holder Fork, ISO30 tool grippers or ISO30 tool clips. These replacement tool hol
      Biesse HSK 63F Tool Holder Forks CNC Tool clips grippers
      HSK63F cnc tool finger forks for HSK 63F tool holder clamping HSK toolholder gripper also called HSK toolholder fork, HSK tool clips, HSK cradle, HSK plastic tool holder, HSK tool holder finger, HSK tool forks etc. HSK
      3 in 1 Wood Lathe Tools Woodturning Lathe Knives for Wood Lathing
      3 in 1 cnc woodturning lathe knives for wood lathing This wood lathe knife tool is a newest design knife for CNC wood turning lathe machine. We called it 3 in 1 wood lathe knife. It includes chisel tool steel knife bo
      New Design Wood Turning cutting Tools for Woodturning CNC and Copy Lathes
      New Design Turning Tools for Woodturning CNC and Copy Lathes After more than a year of painstaking R & D and continuous improvement, combined with the actual use feedback from users, a new generation of woodworkin
      Carbide Wood Lathe Knife CNC Lathe Cutters for Woodturning Lathe Machine
      Carbide CNC Wood Lathe Knifes for Woodturning CNC Lather Machine This CNC wood lathe knife is a new design carbide wood lathe cutter, it is used with CNC wood turning lathe machine, reduces the tool changing times great
      DUST HOG SUPRA CONIC DUST COLLECTOR
      DUST HOG SUPRA CONIC DUST COLLECTOR PRICE: Loaded on Truck, Our Warehouse, York, PA …… $3,950.00 HMC Stock #19028-P Machine Serial No.: 60047749 Machine Model No.: SC1700 New Date: 2001 Rated Air Flow Capacity: 70
      THIEL AIR TECHNOLOGIES AIR FILTER
      THIEL AIR TECHNOLOGIES AIR FILTER PRICE: Loaded on Truck, Our Warehouse, York, PA …… $1,250.00 HMC Stock # 18413 Unit Serial No.: 0395-2093 Unit Model No.: DFHB20-SC10 New Date: 1995 Disposable Media Filter Designe
      Komo VR 522/536 CNC Router
      Reference #30364 Komo VR 522/536 CNC Router (2) Machines, (1) Table Model: VR 536 & VR 522 Age: 2009 FEATURES: Fanuc i CNC Control Machine Retrofitted in 2016 (2) 12 Station Tool Changers CAPACITY: X
      Boring Machine 13spdl BT CQ
      Boring Machine 13-spindle Bench Top Conquest Model: Mini13 BO111 [Conquest] S/N: 1110327 13 Spindle w/Bits 3/4hp; 1ph; 115/230volt
      Band Saw 14" C/S 1-1/2hp/1p PM
      Band Saw 14" Closed Stand 1-1/2hp 1ph PM Model: 1791216K PWBS-14 [Powermatic] S/N: 80411592 w/Light, Dust Blower 1.5hp; 1ph; 115/230volt
      Band Saw 20" 2/1 PM
      Band Saw 20" 2/1 PM Model: 1791257 2013-1 [Powermatic] S/N: 05112013491 20" w/Fence, Light and Chip Blower 2hp, 1ph, 230volt
      Used Master Oscillating Spindle Sander
      Used Master Oscillating Spindle Sander. Spindle Tilts 0 - 45 degrees. Variable spindle speed. 230 volt, 3 phase.
      Used Shen Shing 15" Wide Belt Sander
      Used Shen Shing 15" Wide Belt Sander. Model SEM-15. SN. 94030103. 5 HP, 3 Phase, 220 volt. Mfg. Date March 2005.
      Used DeWalt 16' Super Duty Radial Arm Saw
      Used DeWalt 16' Super Duty Radial Arm Saw. Model 3571 Type 3. SN. 79110012. 7.5 HP, 3 Phase, 230/460 volt, wired 230.
      Clamp I-Bar 72" Jorgensen
      Clamp I-Bar 72" Jorgensen Model: 7272 [Jorgensen]
      Clamp I-Bar 72" Jorgensen
      Clamp I-Bar 72" Jorgensen Model: 7272 [Jorgensen]
      Sliding Table Attach Delta
      Sliding Table Attach Delta Model: 34-555 [Delta] Sliding Table Saw Attachment for Contractor Saw
      Band Saw 14" O/S 3/4hp Delta
      Band Saw 14" Open Stand 3/4hp Delta Model: 28-276 [Delta] S/N: 029106Q5081 Open Stand 3/4hp; 1ph; 120/240volt
      Radial Arm 14" 5/3 w/stnd Dlt
      Radial Arm 14" 5/3 w/stand Delta Model: 33-401 [Delta] S/N: 07E12597200720PC w/Stand, Large Safety Switch & Return Spring 5hp; 3ph; 230/460volt
      Wide Blt Sndr 25" Jet
      Wide Belt Sander 25" Jet Model: 708411B JWB25P [Jet] S/N: 8124279 15hp, 3ph, 230/460volt 1-1/2hp; 3ph; 230/460volt
      Sander B/D 6"x48"x12" C/S Jet
      Sander Belt/Disc 6"x48"x12" Closed Stand Jet Model: 708599K [Jet] S/N: 00502580 Belt Disc Sander w/Closed Stand 1-1/2hp 1ph; 120volt
      Scroll Saw 20" w/Stand DW
      Scroll Saw 20" w/Stand Dewalt Model: DW788 [Dewalt] S/N: 200504CJ8562 13amp; 1ph; 120volt
      15 KVA transformer
      Square "D" 15 KVA transformer. Delta/Delta 3 Phase 480 - 240V with taps
      Mega-bore | Swing 35" | Year 2011 |
      Swing 35" Swing over gap 50" Spindle bore 10" Between centers 65" Thread std/mm Tailstock Spindle Taper MT5 Voltage 460v Dimensions 77" x 175" x 73"
      Used Powermatic model 72A 14" table saw
      Used Powermatic model 72A 14" table saw. Serial Number 9572066. Motor/Power: 7-1/2HP, 3PH, Baldor Motor, 208-230/460 Volts, 19-18/9 Amps Wired for 230V. Table Dimensions: 38" deep x 48" wide Floating
      Used Powermatic 18" PlanerModel 180SN
      Used Powermatic 18" Planer Model 180 SN. 88807250 7.5 HP, 208-230/460 volt, presently wired 208-230 Knife grinding attachment included
      Used Yates American 12" Jointer
      Used Yates American 12" Jointer. Model #1 SN. R-2310 4 Knife Cutter Head 220 Volt, 3 Phase
      Used Northtech Model NTDTM1 Dovetailer
      Used Northtech Model DTM-18 Dovetailer. Max Thickness of Work: 1 1/2" Min. Thickness of Work: 1/2" Template: 18" Wide with Pins on 1" Centers Electric Motor: 2HP Spindle Speed: 12,000 RPM
      Used Original 16" Metal Cutting Saw
      Used Original 16" Metal Cutting Saw. Model 3579 16 L Type 7 Specs: Arm: Long Blade size: 16" HP: 7.5 HP Voltage: 208 Volt only, 3 Phase Feed Voltage: 120 volt Brake: Automatic Arbor: 1" dia. x
      Used Original 16" Metal Cutting Saw
      Used Original 16" Metal Cutting Saw. Model 3579 16 L Type 7 Specs: Arm: Long Blade size: 16" HP: 7.5 HP Voltage: 208 Volt only, 3 Phase Feed Voltage: 120 volt Brake: Automatic Arbor: 1" dia. x
      Cleereman| Spindle: R8 | Table: 16" x 30" |
      Type: Bench drill Spindle: R8 Table: 16" x 30" Stroke: 20" Throat: 12" HP: 5 Dimensions: 45" x 60" x 110"
      Clamp Prll Frm Blk Kit/BnchDog
      Clamp Parallel Framing Block Kit/BenchDog Model: 70401/70402 [Jet] Parallel Framing Block Kit (4) w/Parallel Clamp Bench Dog Pack (4)
      Miter Saw 12" Cmpd DB StndDwlt
      Miter Saw 12" Compound Dual Bevel w/Stand Dewalt Model: DW718/DW723 [Dewalt] S/N: 94841020091849 12" Miter Saw w/Stand Dual Compound Sliding w/Extra Blade & Extension Kit 15amp; 1ph; 120volt
      Clamp Bar 24"/40" KBody BsyWdr
      Clamp Bar 24"/40" KBody Bessey Woodriver Model: [Bessey/Woodriver] KBody Clamps 40" & 24"
      Clamp Bar 24" Cabinet Master
      Clamp Bar 24" Cabinet Master Model: 8024 [Jorgensen] KBody Clamp 24"
      Price:
      •  to 
      1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9