buy & sell, new & used machinery, machine tools & equipment

Woodworking Equipment > Pennsylvania

Woodworking Equipment in Pennsylvania For Sale

59 new & used woodworking equipment items for sale in Pennsylvania
1 | 2 | 3
Refine: Viewing 1 - 20 of 59 matches
Sort by:
Items Per Page:  20  |  50 |  100
2005 JONSEN PRO-STEEL MODEL SG1300-WJS WET TYPE WIDE BELT SANDER, 50”
$RFQ
2005 JONSEN PRO-STEEL MODEL SG1300-WJS WET TYPE WIDE BELT SANDER, 50”
SPECIFICATIONS MAXIMUM WORKING WIDTH: 50” MAXIMUM WORKING THICKNESS: 6.2” BELT MEASUREMENT: 86” X 51” MINIMUM WORKING LENGTH: 11-3/4” MAIN MOTOR: 30 HP FEEDING SPEED: 6.5 – 30 FPM GENERAL MACHINE DIMENSION
Used Brandt OPTIMAT KD 78/ 2C Automatic Edge Bander
$15,000
Used Brandt OPTIMAT KD 78/ 2C Automatic Edge Bander
Used Brandt OPTIMAT KD 78/ 2C Automatic Edge Bander Edgebander equipped with a PC-16 Program Control with a 7.4" color LCD screen, 8 MB IDE Flash Disc 100 MHZ 486 DX4 Hard Drive, 8 MB RAM and internal modem for
Used Delta Model 33-082 14” Radial Arm Saw
$2,250
Used Delta Model 33-082 14” Radial Arm Saw
Used Delta Model 33-082 14” Radial Arm Saw. 5 HP motor, 230/460V 3 phase, wired 230V Includes 2, 5 foot roller conveyors Serial # 90C18886
Used Dust Collector
$950
Used Dust Collector
Used Dust Collector. Torit Model 84 Cabinet Dust Collector, For use on nuisance dust for intermittent duty applications such as grinding, buffing and polishing, metalworking, packaging etc. 3HP with capacity of 500 to
Used metal abrasive cut off saw
$1,200
Used metal abrasive cut off saw
Used metal abrasive cut off saw. 3.5" ACCO-CAMPBELL "SEVER-ALL" ABRASIVE BLADE CUT-OFF SAW Model 1A, EQUIPPED WITH: * Wheel Oscillation CATALOGUE SPECIFICATIONS: * Diameter Capacity, Tubes or Pipes 3
Used Zeno Grinder
$20,000
Used Zeno Grinder
Used Zeno Grinder. - Model ZTLL 1350/1580 Low Noise Hopper Fed Waste Grinder - Vertical hopper feed, 70 HP rotor motor, 15" dia. rotor with (28) reversible knives built into the rotor without knife holders, speci
Used Giben KG 365 Automatic Edgebanding Machine
$22,000
Used Giben KG 365 Automatic Edgebanding Machine
Used Giben KG 365 Automatic Edgebanding Machine. Used for application of veneer and coiled PVC, from 0.4 up to 3 mm of thickness, and strips up to 5 mm of thickness. GENERAL CHARACTERISTICS The new base design toget
Used Island Clean Air Duster 1000 Dust Collector
$2,350
Used Island Clean Air Duster 1000 Dust Collector
Used Island Clean Air Duster 1000. Submicron Air Filtration. * Clean shop air up to 1,000 sq. ft. * Floor level pick-up, circulates all the air * Lightweight and mobile * Operates on single phase 110V or 220V * N
Used Black & Decker 3436 Radial Arm Saw
$1,500
Used Black & Decker 3436 Radial Arm Saw
Used Black & Decker model 3436 radial arm saw. 208-240/480V, three phase, wired 230 S/N 73671212.
Used Dewalt GR54 Radial Arm Saw
$750
Used Dewalt GR54 Radial Arm Saw
Used Dewalt Model GR54 Radial Arm Saw. - 3 HP, 220 volts, three phase, - 29" arm, - four conical bearing mounted head. -16" Max blade size. SN 103304, year 1953
Used Northfield No 4 Table Saw
$3,900
Used Northfield No 4 Table Saw
Used Northfield No. 4 Table Saw. 5hp, 3 phase, 230/460 volt (wired 230) Includes miter gauge, NOS Biesemeyer fence, blade guard, new blade, new motor control.
2016 LAGUNA SMARTSHOP III CNC ROUTER WITH FANUC OiMF CONTROL, 5’ X 10”
$RFQ
2016 LAGUNA SMARTSHOP III CNC ROUTER WITH FANUC OiMF CONTROL, 5’ X 10”
SPECIFICATIONS TABLE SIZE: 5” X 10” TOOL CHANGER: 8 POSITIONS Z-AXIS TRAVEL: 12” SPINDLE MOTOR: 12 HP SPINDLE SPEED: 24,000 RPM SPINDLE TAPER: HSK-63F CUTTING SPEEDS: 1,600 IPM RAPID TRAVELS: 2,500 IPM GENE
Used Oliver Model 299T 24" Planer With ITCH Spiral Head
$12,900
Used Oliver Model 299T 24" Planer With ITCH Spiral Head
Used Oliver Model 299T 24" Planer With ITCH Spiral Head. 7.5 HP, 208-220/440 volt 24" wide capacity, 8" Max thickness Variable feed speed, 25 to 100 fpm Power driven adjustable height bed rollers Kn
Used MB Roba Duplex
$15,000
Used MB Roba Duplex
Used MB Roba Duplex. The Roba Simplex/Duplex consists of one or two sanding areas of 100 mm. The height adjustment is done pneumatically in fast motion mode. In the Duplex machine two different sanding paper settin
Used Delta Model 33-402 14" Radial Arm Saw
$3,000
Used Delta Model 33-402 14" Radial Arm Saw
Used Delta Model 33-402 14" Radial Arm Saw. 5HP, 200-208/400 Volt 3 phase wired @ 230V S/N 99177899
Used Northfield Model 16HD 16" Jointer
$8,500
Used Northfield Model 16HD 16" Jointer
Used Northfield Model 16HD 16" Jointer. 5HP, 3 Phase, 208-220/440 Volt, wired 220V 3600 RPM Direct Drive Motor Short stop brake. Includes manual & parts list, extra knives. S/N 77310-A
Used Techno Model LCX Series 4848 CNC Router
$12,000
Used Techno Model LCX Series 4848 CNC Router
Used Techno Model LCX Series 4848 CNC Router. *4x4 table fixed table with moving gantry *120V single phase *4 position tool changer *Automatic tool change *4 tool holders *Extra height columns *5HP HSD electro s
Used Gerber Saber 4 x 4 CNC router
$7,900
Used Gerber Saber 4 x 4 CNC router
Used Gerber Saber 4 x 4 CNC router. 7 HP Perske spindle motor 220v 3 phase Complete with computer and software No vacuum pump Year Pre-2002
Used Powermatic Drill Press
$1,099
Used Powermatic Drill Press
Used Powermatic Drill Press. Model 1150 15" drill press; floor model; step pulley; complete with tilting table, key chuck spindle, 1/2 HP, 3 PH motor, 230/460 volt, and manual switch. Serial number: 215S649, mfg. y
Used Whirlwind 1000 LH Cut Off Saw
$2,200
Used Whirlwind 1000 LH Cut Off Saw
Used Whirlwind 1000 LH Cut off saw. 14” blade capacity 5hp 240v 3ph 2 x 8 capacity
Categories:
Condition:
Manufacturer:
Location:
  • X Pennsylvania (59)
Price:
  •  to 
1 | 2 | 3