buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Used > Michigan

Used Machine Tools in Michigan

1286 used machine tools items for sale in Michigan
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 701 - 800 of 1286 matches
Sort by:
Items Per Page:  20 |  50 |  100
Ermak 120 Ton x 8' (2011)
$RFQ
Ermak 120 Ton x 8' (2011)
120 Ton x 8' Installed Axis Y1 Y2 X R Z1 Z2 Graphic Control With Offline Programming CNC Crowning Table 2 Front Sliding Support Arms on Ways Rear Photo Light Curtain 31.5 " Servo Driven Back Gauge European To
  • Tonnage: 120T
    Clausing Colchester 15 Metal Lathe
    $RFQ
    Clausing Colchester 15 Metal Lathe
    Swing Over Bed and Saddle Wings: 15-1/4" Swing Over Cross Slide: 9-1/2" Bar Capacity Thru Spindle: 2-1/8" Distance Between Centers: 50" Spindle Nose: 6" D1 Camlock Spindle Speeds: (16) 25 to 20
    • Swing: 15.25"
    • Centers: 50"
      Takisawa EX-122 (2005)
      $RFQ
      Takisawa EX-122 (2005)
      Specifications: Maximum Swing:............................................... 36" Swing Over Carriage:........................................ 22.2" Maximum Turning Diameter:................... 24.02" Maximum Shaft
      • Swing: 36"
      • Centers: 71"
        OKUMA MX-55VA (1998)
        $RFQ
        OKUMA MX-55VA (1998)
        EQUIPPED WITH: OSP 700M CNC Control, RS-232 Port, Manual Pulse Generator, 20 Position Automatic Tool Changer, Full Enclosure, Chip Conveyor, Coolant System. CATALOGUE SPECIFICATIONS: Table Working Surface..
        • X axis: 41"
        • Y axis: 22"
          OKK PCV-55
          $RFQ
          OKK PCV-55
          TRAVELS (X)............... 40" TRAVELS (Y)............... 22" TRAVELS (Z)............... 21" TABLE SIZE................ 48" X 22" SPINDLE SPEED............. 13,000 RPM SPINDLE TAPER............. CT-50 SPINDLE MOTOR
          • X axis: 40"
          • Y axis: 22"
            OKK MCV-550 (1998)
            $RFQ
            OKK MCV-550 (1998)
            TRAVEL (X)................ 41.34" TRAVEL (Y)................ 21.65" TRAVEL (Z)................ 22.05" TABLE SIZE................ 51" X 22" MAX TABLE CAP............. 3,300 LBS SPINDLE MOTOR............. 25 - 4000 RP
            • X axis: 41"
            • Y axis: 21"
              OKK VM5-II
              $RFQ
              OKK VM5-II
              Table size 41"x22" Max. Table Load 1760 Lbs Spindle Nose to Table Top 5.9"-25.9" X Axis Travel 40.15" Y Axis Travel 20.08" Z Axis Travel 20.08" Rapid traverse rate X, Y Axes 1181 IPM Rapid traverse rate Z Axis 787
              • X axis: 40"
              • Y axis: 20"
                Monarch VMC-150 (1989)
                $RFQ
                Monarch VMC-150 (1989)
                CAPACITIES: X-AXIS TRAVEL, TABLE BACK & FORTH ...... 50" Y-AXIS TRAVEL, SADDLE IN & OUT ......... 36" Z-AXIS TRAVEL, QUILL UP & DOWN ......... 10" W-AXIS TRAVEL, SLIDING HEAD UP-DOWN .... 23" SPINDLE SPEED, MAX ......
                • X axis: 50"
                • Y axis: 36"
                  Doosan VM 3016LHs (2008)
                  $RFQ
                  Doosan VM 3016LHs (2008)
                  STANDARD FEATURES Fanuc 21 i-MB Control 20,000 RPM spindle Powerful 11 /18.5 kW (15 I 25 hp) spindle motor Cartridge spindle design High precision spindle with two double-row cylindrical bearings and two angular c
                  • X axis: 30"
                  • Y axis: 16"
                    OKK VM5ii
                    $RFQ
                    OKK VM5ii
                    SPECIFICATIONS Table Size 41.3” x 22.0” X Axis Travel 40.0” Y Axis Travel 20.0” Z Axis Travel 20.0” Spindle Horsepower 20 Hp Spindle RPM (Vari-Speed) 8,000 RPM Spindle Taper CAT40 Tool Changer Capacity 20
                    • X axis: 40"
                    • Y axis: 20"
                      Studer S36 CNC Cylindrical Grinder (1998)
                      $RFQ
                      Studer S36 CNC Cylindrical Grinder (1998)
                      Specifications: Distance Between Centers: 39.4" Center Height: 6.9" Max. Workpiece Weight Between Centers: 286 Lbs Cross Slide (X): Max Travel: 10.5" Speed: 197 ipm Resolution:
                      STAR ST-38P* Swiss Type CNC Lathe (2011)
                      $RFQ
                      STAR ST-38P* Swiss Type CNC Lathe (2011)
                      *P specification has the ability to set the pitch error compof the ball screws Equipped with: LNS Sprint 542 magazine Bar Loader (12') w/ 3 guide channel and pusher sets 3 Turrets Sub Spindle Full C axis Y axis To
                      250 TON CLEARING SSDC PRESS S2-250-84-54 (1992)
                      $RFQ
                      250 TON CLEARING SSDC PRESS S2-250-84-54 (1992)
                      84" x 54" BED AREA 12" STROKE 30" SHUT HEIGHT 12" POWER RAM ADJUSTMENT 20-40 STROKES PER MINUTE 31" WINDOWS FLOOR STANDING CUSHION AIR CLUTCH AIR BRAKE AIR COUNTERBALANCES T-SLOTTED RAM AND BOLSTER LIGHT CURT
                      • Tonnage: 250T
                      • Tonnage: 250T
                      • Tonnage: 250T
                        Mori Seiki SH 63
                        $RFQ
                        Mori Seiki SH 63
                        PALLETS (X) 24.8" X 24.8" LOAD CAPACITY 2640 LBS PALLET CHANGING TIME 15 SEC TABLE INDEXING TIME 2.3 SEC TABLE INDEXING 1-DEGREE CUTTING FEEDRATES 0.01-630 IPM RAPID TRAVERSE RATE XYZ 12
                        • X axis: 33.12"
                        • X axis: 33.12"
                        • X axis: 33.12"
                          Feintool SA Blanking Press GKP-F-320 (1975)
                          $RFQ
                          Feintool SA Blanking Press GKP-F-320 (1975)
                          Specification Total Main Ram Force 320 Tons Stroke 63 mm (2.48") Number of strokes max. 40 / min Ram adjustment 130 mm (5.11") V-RING: Nominal force 100 Tons Stroke 25 mm (1") COUNTER RAM: Nominal force
                          • Tonnage: 320T
                          • Stroke: 2.48"
                            Cincinnati 230AS Hydraulic CNC Press Brake (1986)
                            $RFQ
                            Cincinnati 230AS Hydraulic CNC Press Brake (1986)
                            Specifications: Tonnage Capacity:........................................... 230 Tons Overall Length of Bed and Ram:................ 192" (16' 0") Distance Between Housings:...................... 174" (14' 6") Stro
                            • Tonnage: 230T
                              KOMO CNC ROUTER-VR 510TG
                              $RFQ
                              KOMO CNC ROUTER-VR 510TG
                              Komo VR 510TG CNC Router, 10 stations, 5 ft. x 10 ft. table, 3 phase, 48v, vari-speed 626 MC5 Vector Control w/Dynaseal vac pump, Heviduty 30KVA 3 phase transformer GE Fanuc readout. Equipped with HSD 13.4 HP spindle; HS
                              TOS WHN 13A
                              $RFQ
                              TOS WHN 13A
                              Model # WHN 13A NO 007-17 Travels: X-120" Y-75" W-40" RPM: 1000 ,Rapid 5,000, Max Fee rate 900 Controller: Heidenhain TNC 415B Table Capacity: 30,000 LBS
                              • Spindle diameter: 120"
                                Hurco VTXU (2006)
                                $RFQ
                                Hurco VTXU (2006)
                                Specifications: X-Axis: 31.5" Y-Axis: 27.5" Z-Axis: 20" Number of Axis: 5 Table Size: 24" x 20.9" Max Weight On Table: 880 lbs Max Part Diameter: 21.7" Spindle Speed: 12,000 rpm Spindle Motor: 24 hp Rapid Tra
                                • X axis: 31.5"
                                • Y axis: 27.5"
                                  DOOSAN PUMA 400LC (2012)
                                  $RFQ
                                  DOOSAN PUMA 400LC (2012)
                                  Chuck Size 20.9" Max Diameter Bar Capacity 6.5" Max Swing Over Bed / Carriage 30.3" / 23.2" Max Turning Diameter (Max / Std) 21.7" / 15" Distance Between Centers 86" Max Machining Length 81.7" Spindle S
                                  DMG DML 80 PowerShape Laser System (2005)
                                  $RFQ
                                  DMG DML 80 PowerShape Laser System (2005)
                                  Equipped With: Rofin-Sinar RS 100 DP Q-Switched Diode-Pumped Nd:YAG Laser (100 Watt) Integrated Laser Control with 2-Axis Galvo = 181 mm flat field lens 225 mm working distance LASERSOFT PowerDrill LASERSOFT Power
                                  Komo VMC50 (1995)
                                  $RFQ
                                  Komo VMC50 (1995)
                                  Table: Table Size: 32" x 123" Maximum Table Load: Unlimited Travels: X-Axis Travel: 120" Y-Axis Travel: 32" Z-Axis Travel: 32" Spindle: Spindle Speeds - Maximum: 3,500 RPM Spindle Taper: CAT 50 Taper Main Motor
                                  • X axis: 120"
                                  • Y axis: 32"
                                    Ganesh TY5040CNC (2011)
                                    $RFQ
                                    Ganesh TY5040CNC (2011)
                                    Capacity: Swing over the bed: 52" Swing over Cross Slide: 36.20" Center Height: 25.60" Bed width of ways: 35.40" Spindle Spindle Bore.: 10.04" Spinde Nose: A2-15 Spindle Motor (Peak / 30 minute): 40 HP / 30 HP S
                                    • Swing: 52"
                                    • Spindle hole diameter: 10.04"
                                      Haas ST40 (2012)
                                      $RFQ
                                      Haas ST40 (2012)
                                      Capacity: Swing: 35.4" Swing Over Cross Slide: 25.5" Max. Turning Length (without workholding): 44.0" Spindle: Spindle Speeds (RPM): 2400 RPM Spindle Bore: 4.62 " Bar Work Capacity (Thru Draw Tube).: 4.0" Spindle
                                      • Swing: 35.4"
                                      • Centers: 44"
                                        Ganesh Cyclone CY32 (2011)
                                        $RFQ
                                        Ganesh Cyclone CY32 (2011)
                                        AXIS TRAVELS: CNC Controlled Axis: 4 (X,Y,Z,&C) X-Axis Travel (Vertical Tool): 7.5" Y-Axis Travel (Cross Tool): 11.4" Z-Axis Travel (Sliding Headstock): 6.5" C-Axis Travel (Rotational Axis): 360,000 radial pos. SPI
                                        • Spindle hole diameter: 1.25"
                                          KURAKI KBM 11X CNC HORIZONTAL BORING MILL (2005)
                                          $RFQ
                                          KURAKI KBM 11X CNC HORIZONTAL BORING MILL (2005)
                                          Table Size 37.40"X 41.34" Spindle Diameter 4.3" Spindle Speed 3-3000 RPM Spindle Speed Range 2 Table Top To Spindle Center 0-47.24 Table Center To Spindle Nose 13.98"-41.54" Axis Travels X – Axis 59.06”
                                          • Spindle diameter: 59.06"
                                            Makino FNC 106A20 4-Axis Vertical Machining Center (1986)
                                            $RFQ
                                            Makino FNC 106A20 4-Axis Vertical Machining Center (1986)
                                            Specifications: Table: 65” x 33” Table working surface: 55” x 24” Travels: 41” x 26” x 22” Spindle taper: Cat 50 Spindle speeds: 3500 Spindle HP: 20 HP ATC: 20 Cutting speeds: 0.010
                                            • X axis: 41"
                                            • Y axis: 26"
                                              HAAS HL-6 (1998)
                                              $RFQ
                                              HAAS HL-6 (1998)
                                              EQUIPPED WITH: Haas CNC Control, Programmable Tailstock, 10 Position ID/OD Tool Turret,Heavy Duty Slant Bed Construction, High/Low Spindle Range, Tooling Package, Chip Conveyor and Coolant System. CATALOGUE SPECIF
                                              • Swing: 40"
                                              • Centers: 51"
                                                60 Ton x 6' ACCURPRESS CNC 7606, (1997)
                                                $RFQ
                                                60 Ton x 6' ACCURPRESS CNC 7606, (1997)
                                                Specifications: Tonnage Capacity:.......................................................................................................... 60 Tons Overall Length of Bed and Ram:........................................
                                                • Tonnage: 60T
                                                  Doosan VM 3016LHs (2008)
                                                  $RFQ
                                                  Doosan VM 3016LHs (2008)
                                                  STANDARD FEATURES Fanuc 21 i-MB Control 20,000 RPM spindle Powerful 11 /18.5 kW (15 I 25 hp) spindle motor Cartridge spindle design High precision spindle with two double-row cylindrical bearings and two angular c
                                                  • X axis: 30"
                                                  • Y axis: 16.1"
                                                    CLAUSING GB70 HYDRAULIC FABRICATOR
                                                    $RFQ
                                                    CLAUSING GB70 HYDRAULIC FABRICATOR
                                                    CAPACITY ................. 70 TON THROAT DEPTH ............. 9" OPEN HEIGHT .............. 14" STROKE LENGTH ............ 7" RAM SHAFT DIAMETER .....
                                                    • Tonnage: 70T
                                                    • Throat: 9"
                                                      MAZAK ST50N/3000U (2008)
                                                      $RFQ
                                                      MAZAK ST50N/3000U (2008)
                                                      SPECIFICATIONS: Max. Swing Over Bed: 31.69" Max. Swing Over Carriage: 22.05" Max. Cutting Diameter: 25.98" Distance Between Centers: 129.41" Max. Workpiece Length: 119.29" Max. Supportable Weight (With Chuck Weight
                                                      • Swing: 31.69"
                                                        CLAUSING PUNCH PRESS / METAL MUNCHER GB70
                                                        $RFQ
                                                        CLAUSING PUNCH PRESS / METAL MUNCHER GB70
                                                        70 TON / 1'' THRU 7/8' FOOTSWITCH, LOT OF TOOLING, 16'' X 36'' BED
                                                        300 TON HAMILTON DOWN-ACTING 4-POST HYDRAULIC PRESS
                                                        $RFQ
                                                        300 TON HAMILTON DOWN-ACTING 4-POST HYDRAULIC PRESS
                                                        EQUIPPED WITH: DHS Die Heat System T-Slotted Bed And Ram (12" Spacing of Slots) Dual Palm Button Pedestal Control Stand Self Contained Hydraulic System Light Curtains CATALOGUE SPECIFICATIONS: Tonnage Ca
                                                        • Tonnage: 300T
                                                        • Stroke: 24"
                                                          EWAG EWAMATIC Precision Carbide Tool Grinder (1999)
                                                          $RFQ
                                                          EWAG EWAMATIC Precision Carbide Tool Grinder (1999)
                                                          X-axis, transverse adjustment mm: 360/ 14.7" Y-axis, height adjustment mm: 150/ 5.9" Z-axis, infeed stroke mm: 230/ 9.05" Axis resolution mm: 0,0001/ 0.000004"
                                                          Mazak Quick Turn Nexus 250-II MSY CNC Turning Center
                                                          $RFQ
                                                          Mazak Quick Turn Nexus 250-II MSY CNC Turning Center
                                                          Specifications: Maximum Swing 26.50" Maximum Machining Diameter 14.750" Maximum Bar Work Capacity 3" Maximum Machining Length 21.275" Main Spindle Chuck Size 10" Maximum Speed 6000 rpm Motor 35 H.P.
                                                          • Swing: 26.5"
                                                          • Centers: 21.275"
                                                            Pacific 300D8-42
                                                            $RFQ
                                                            Pacific 300D8-42
                                                            Specifications; Type - Straight Side Hydraulic Bed - 96" x 42" Slide - 96" x 42" (108" between uprights) Speeds - 215 IPM (Rapid approach) - 25 IPM (Press) - 132 IPM (Rapid return) Stroke - 24" Max. Open h
                                                            • Tonnage: 300T
                                                            • Stroke: 24"
                                                              Johnford VMC-2024 (1996)
                                                              $RFQ
                                                              Johnford VMC-2024 (1996)
                                                              SPECIFICATIONS Spec Inch Year 1996 Control Fanuc 0-M Table Size 83"x34" Travels (X) 80" Travels (Y) 35" Travels (Z) 31" Spindle Taper CAT 40 Spindle Speed 6,000 RPM Machine Weight 36,000 lbs Number of
                                                              • X axis: 80"
                                                              • Y axis: 35"
                                                                MAZAK ST50N/3000U (2008)
                                                                $RFQ
                                                                MAZAK ST50N/3000U (2008)
                                                                SPECIFICATIONS: Max. Swing Over Bed: 31.69" Max. Swing Over Carriage: 22.05" Max. Cutting Diameter: 25.98" Distance Between Centers: 129.41" Max. Workpiece Length: 119.29" Max. Supportable Weight (With Chuck Weight
                                                                • Swing: 31.69"
                                                                  Kitamura Bridgecenter 8F (2006)
                                                                  $RFQ
                                                                  Kitamura Bridgecenter 8F (2006)
                                                                  Specifications: Table Table Size 35.5" x 98.5" Table Load Capacity 6,600 lbs T-Slots (7) x 18mm Travels X-Axis Travel 80" Y-Axis Travel 42.7" Z-Axis Travel 28" Table Surface to Spindle Nose 9.9" - 37.9" Spindl
                                                                  • X axis: 80"
                                                                  • Y axis: 42.7"
                                                                    ROMI M-23 (2005)
                                                                    $RFQ
                                                                    ROMI M-23 (2005)
                                                                    CENTER HEIGHT................................................................. 11.42" DISTANCE BETWEEN CENTERS...................................... 120" SWING OVER BED .................................................
                                                                    Kuraki KBT-13DXA (1993)
                                                                    $RFQ
                                                                    Kuraki KBT-13DXA (1993)
                                                                    Specifications: X-Longitudinal Table Travel 118.11”, Y-Spindle Vertical Travel 78.74”, Z-Column Cross Travel 51.18”, W-Spindle Axial Travel 27.56”, Table Size 63” X 70.87”, Max Loading Weight on Table 22,000 l
                                                                    • Spindle diameter: 5.12"
                                                                    • X axis travel: 118.11"
                                                                      Jet Edge HR612 (2008)
                                                                      $RFQ
                                                                      Jet Edge HR612 (2008)
                                                                      Specifications: Travels –X-Axis: 144" - Y-Axis: 72" - Z-Axis: 12" Intensifier Output:60,000 PSI Flow Rate: 1.1 GPM Motor: 50 HP 3/60 Accuracy: +/- 0.001" Contouring Speed: 750"
                                                                      CINCINNATI MILACRON CNC GANTRY VERTICAL MILLING MACHINE
                                                                      $RFQ
                                                                      CINCINNATI MILACRON CNC GANTRY VERTICAL MILLING MACHINE
                                                                      SPECIFICATIONS: CONTROL TYPE...............................: DELTA TAU (3) DIMENSIONAL TABLE SIZE.................................: 128" x 430" (X) TRAVEL ................................: 400" (Y) TRAVEL ...........
                                                                      • X axis: 400"
                                                                      • Y axis: 128"
                                                                        Mazak HTC400 (1996)
                                                                        $RFQ
                                                                        Mazak HTC400 (1996)
                                                                        X Axis Travel 22.05" Y Axis Travel 20.08" Z Axis Travel 20.08" Pallet Size ( 2 ) 15.7" X 15.7" Chip conveyor not included 24 tool, 10,000 rpm spindle, Cat 40 When powered up, this alarm appears when trying t
                                                                        • X axis: 22.05"
                                                                        • Y axis: 20.08"
                                                                          Blanchard 22AK-42 Rotary Surface Grinder
                                                                          $RFQ
                                                                          Blanchard 22AK-42 Rotary Surface Grinder
                                                                          Blanchard 22AK-42 Rotary Surface Grinder
                                                                          MATTISON 36X8FT
                                                                          $RFQ
                                                                          MATTISON 36X8FT
                                                                          COMING SOON
                                                                          MATTISON 24X8FT
                                                                          $RFQ
                                                                          MATTISON 24X8FT
                                                                          COMING SOON
                                                                          KALAMAZOO 1220D
                                                                          $RFQ
                                                                          KALAMAZOO 1220D
                                                                          KALAMAZOO 1220D
                                                                          MORI SEIKI NHX5000 CNC HORIZONTAL MACHINING CENTER (2012)
                                                                          $RFQ
                                                                          MORI SEIKI NHX5000 CNC HORIZONTAL MACHINING CENTER (2012)
                                                                          MORI SEIKI NHX5000 CNC HORIZONTAL MACHINING CENTER (2012)
                                                                          • X axis: 28.7"
                                                                          • X axis: 28.7"
                                                                          • Y axis: 28.7"
                                                                            BROTHER TC-32B QT, 5-AXIS CNC TAPPING CENTER
                                                                            $RFQ
                                                                            BROTHER TC-32B QT, 5-AXIS CNC TAPPING CENTER
                                                                            X-AXIS TRAVEL........................... 21.7" Y-AXIS TRAVEL........................... 15.7" Z-AXIS TRAVEL........................... 16.3" DISTANCE BETWEEN TABLE TOP AND SPINDLE END NOSE.. 25.4" PALLET WORK AREA SI
                                                                            700 TON USI CLEARING HYDRAULIC PRESS Model HO-700-96-60
                                                                            $RFQ
                                                                            700 TON USI CLEARING HYDRAULIC PRESS Model HO-700-96-60
                                                                            Housing type Single action with 150 ton bed cushion Distance between positive slide stops: 97" L-R Area of bed (nominal): 97" L-R x 60" F-B Bed bolster: 96" L-R x 60" F-B x 10"
                                                                            • Tonnage: 700T
                                                                            • Tonnage: 700T
                                                                            • Stroke: 700"
                                                                              TOYODA MODEL FA630 CNC HORIZONTAL MACHINING CENTER
                                                                              $RFQ
                                                                              TOYODA MODEL FA630 CNC HORIZONTAL MACHINING CENTER
                                                                              Catalogue Specifications Pallet Size: 24.8" x 24.8" Indexing: 1 Degree Number of Pallets: 2 X-Axis Travel: 39.37" Y-Axis Travel: 33.46" Z-Axis Travel: 29.52" Spindle Speed: 6,000 RPM
                                                                              • X axis: 39.37"
                                                                              • X axis: 39.37"
                                                                              • X axis: 39.37"
                                                                                SNK HPS 120B/5 Profiler CNC Horizontal Machining Center
                                                                                $RFQ
                                                                                SNK HPS 120B/5 Profiler CNC Horizontal Machining Center
                                                                                Spindle: • Spindle Speed: 15,000 RPM • Spindle Taper: 50 Taper • Spindle Motor: 50 HP Spindle Head Tilt: • A-Axis: 45 Degrees • C-Axis: 270 Degrees Feedrate: • X,Y,Z axes: 1 to 393 IPM • A,C axes: 0 to 1800 DPM
                                                                                • X axis: 124"
                                                                                • X axis: 124"
                                                                                • X axis: 124"
                                                                                  MAZAK CNC MULTIPLEX 6200Y WITH GANTRY LOADER
                                                                                  $RFQ
                                                                                  MAZAK CNC MULTIPLEX 6200Y WITH GANTRY LOADER
                                                                                  SPECIFICATIONS Max Swing Diameter..................................12.50 In Standard Cutting Diameter.........................10.24 In Max Cutting Diameter for Bar Work............2 In Distance Between Spindles at Ho
                                                                                  EmcoTurn 420 Multi Axis CNC Turning Center
                                                                                  $RFQ
                                                                                  EmcoTurn 420 Multi Axis CNC Turning Center
                                                                                  Specification Description # Axis: 4 Bar Capacity: 1.02 " Power: 12 hp Turning Dia: 6.1 " Swing: 13.38 " Control: Siemens 840D Dimensions: 86.7" x 59" x 86.7" Weight: 5,720 Lbs Equipped With: Full
                                                                                  • Swing: 13.38"
                                                                                  • Swing: 13.38"
                                                                                  • Centers: 13.38"
                                                                                    MORI SEIKI, NH5000DCG/40
                                                                                    $RFQ
                                                                                    MORI SEIKI, NH5000DCG/40
                                                                                    SPECIFICATIONS: PALLET SIZE: 19.7" X 19.7" MACHINE WEIGHT: 28,380 LBS. TRAVELS: --X: 28.70" --Y: 28.70" --Z: 33.50" DISTANCE FROM SPINDLE CENTER TO TOP OF PALLET: 3.90" - 32.70" DISTANCE FROM SPINDLE NOSE
                                                                                    • X axis: 28.7"
                                                                                    • X axis: 28.7"
                                                                                    • X axis: 28.7"
                                                                                      MAZAK e500HS series II INTEGREX MULTI-TASKING TURNING CENTER
                                                                                      $RFQ
                                                                                      MAZAK e500HS series II INTEGREX MULTI-TASKING TURNING CENTER
                                                                                      Specifications Maximum swing over bed: 32.28" Maximum swing over carriage: 32.28" Maximum machining diameter: 32.28" Maximum distance between centers: 1
                                                                                      • Swing: 32.28"
                                                                                      • Centers: 120"
                                                                                        Sunstrand/Arter Grinder
                                                                                        $RFQ
                                                                                        Sunstrand/Arter Grinder
                                                                                        Sunstrand Rotary Surface Grinder 9" Height Under Wheel Convex & Concave Tilt of work table
                                                                                        BRIDGEPORT 3 AXIS SERIES I CNC VERTICAL MILL (1984)
                                                                                        $RFQ
                                                                                        BRIDGEPORT 3 AXIS SERIES I CNC VERTICAL MILL (1984)
                                                                                        TABLE SIZE ----- ( OVERALL ) -------------- 16-1/8" X 42" TABLE SIZE ----- ( WORKING SURFACE ) ------ 12-1/2" X 34" TABLE POSIITONING SPEED ------------------- 250 IPM TABLE TRAVEL --- ( X-AXIS ) ------------
                                                                                        • Table width: 12.5"
                                                                                        • Table length: 34"
                                                                                          KURAKI KBT-13A CNC (1998)
                                                                                          $RFQ
                                                                                          KURAKI KBT-13A CNC (1998)
                                                                                          SPECIFICATIONS: SPINDLE BAR 5.12" SPINDLE TAPER ISO 50 SPINDLE MOTOR HP APPROX. 30 HP TRAVELS: X AXIS 118" Y AXIS 78.74" Z AXIS 51" W AXIS TRAVEL 27.56" TABLE SIZE 65" X 72" T-SLOTTED 60 POSITION AUTOMATIC TOOL
                                                                                          OKUMA MA-400HA HMC (2009)
                                                                                          $RFQ
                                                                                          OKUMA MA-400HA HMC (2009)
                                                                                          Pallet Size 15.75" (2) Travel: X-Axis 22.05" Y-Axis 24.01" Z-Axis 24.61" Pallet Index .001 Degrees Spindle Speed 50 - 15,000 RPM Spindle Taper Cat 40 Spindle Motor 20 / 15 HP Spindle Center to
                                                                                          • X axis: 22.05"
                                                                                          • Y axis: 24.01"
                                                                                            Blanchard 22K 42
                                                                                            $RFQ
                                                                                            Blanchard 22K 42
                                                                                            Chuck Size 42" Diameter Range 48" Chuck Pole Spacing 5/8" Chuck Center Hole 2" Grinding Wheel 22"
                                                                                            Blanchard 18-36
                                                                                            $RFQ
                                                                                            Blanchard 18-36
                                                                                            Table Chuck Diameter - 36" Max Swing Inside Guard - 40" Segmented Wheel Diameter - 18" Max Work Height Under Wheel - 11"
                                                                                            • Chuck: 36"
                                                                                              Blanchard 42-84
                                                                                              $RFQ
                                                                                              Blanchard 42-84
                                                                                              Range: 85" Diameter x 24" High Wheel: 42" Segmented Swing Inside Guards: 86" Maximum Height Under Wheel w/New Segments: 24"
                                                                                              Boyar Schultz H618
                                                                                              $RFQ
                                                                                              Boyar Schultz H618
                                                                                              Table longitudinal travel: 19-7/8" Table cross feed: 6-13/16" Maximum work height under wheel: 12-1/8" over table Maximum work height under wheel: 9-1/2" over chuck Work surface: 5-5/8" x 18"
                                                                                              • Table width: 5.63"
                                                                                              • Table length: 18"
                                                                                                Devlieg 3H-72
                                                                                                $RFQ
                                                                                                Devlieg 3H-72
                                                                                                Spindle Size 3" Spindle Taper #40 Taper Spindle Speed 25-1,200 RPM Spindle Motor 10 HP Table Size 35" x 72" X-Axis Travel 72" Y-Axis Travel 36" Z-Axis Travel 16" W-Axis Travel 16" Machine Weight 32,900 lbs F
                                                                                                • Spindle diameter: 3"
                                                                                                  Devlieg 4K-60
                                                                                                  $RFQ
                                                                                                  Devlieg 4K-60
                                                                                                  Spindle Diameter: 4" Spindle Nose Taper: #50 (with Power Draw Bar) Spindle Travel: 48" - Vertical (Y-Axis) 20" - Horizontal (19) Spindle Speeds: 14 - 1450 RPM (16) Spindle Feeds: .0013 IPR - .167 IPR Table Size: 40
                                                                                                  • Spindle diameter: 4"
                                                                                                  • Vertical travel: 48"
                                                                                                    DoAll C-1213NC
                                                                                                    $RFQ
                                                                                                    DoAll C-1213NC
                                                                                                    SPECIFICATIONS WIDTH 1 1/4" THICKNESS .042" LENGTH 12'
                                                                                                    DoAll TF-14H
                                                                                                    $RFQ
                                                                                                    DoAll TF-14H
                                                                                                    Horizontal Capacity 14' Vertical Capacity 21" Blade Dimensions (LxWxT) 171" X 1" X .035" Wheel Diameter 14" Table Height 38" Working Surface 36" x 27" Max. Vise Opening 14-1/2" Vise Height (Standard) 10" Main Dri
                                                                                                    250 TON MINSTER HEVI-STAMPER STRAIGHT SIDE PRESS (1980) MODEL: #E2-250-84-5
                                                                                                    $RFQ
                                                                                                    250 TON MINSTER HEVI-STAMPER STRAIGHT SIDE PRESS (1980) MODEL: #E2-250-84-5
                                                                                                    SPECIFICATIONS: Capacity: 250 Tons Stroke: 12” Shut Height: 40” Slide adjustment: 6” Bed & Ram Area: 84” L-R x 50” F-B Speeds: 30 - 60 SPM Windows: Yes Equipped With: Minster Air Clutch & Brake Ai
                                                                                                    • Tonnage: 250T
                                                                                                    • Tonnage: 250T
                                                                                                    • Tonnage: 250T
                                                                                                      OKUMA & HOWA CNC Millac 630H (2005)
                                                                                                      $RFQ
                                                                                                      OKUMA & HOWA CNC Millac 630H (2005)
                                                                                                      EQUIPPED WITH: Fanuc 16IM CNC Control, Rigid Tapping, Helical Interpolation, Multiple Part Program Storage, 24.8" x 24.8" Pallets, Full 4th Axis Pallet Rotation, 80 Position Automatic Tool Changer, RS-232 Port, Full C
                                                                                                      • X axis: 40"
                                                                                                      • X axis: 40"
                                                                                                      • X axis: 40"
                                                                                                        250 TON VERSON SSDC PRESS MODEL: S2-250-96-48
                                                                                                        $RFQ
                                                                                                        250 TON VERSON SSDC PRESS MODEL: S2-250-96-48
                                                                                                        BED AREA: 96" x 48" SLIDE AREA: 96" x 48" STROKE: 12" SHUT HEIGHT: 30.5" ADJUSTMENT: 8" WINDOWS: 28" WIDE SPM: 25 OVERALL DIMEMSIONS: 19'8" H EQUIPPED WITH: 6" BOLSTER 52" FROM FLOOR TO TOP OF BOLSTER T-SLOTTE
                                                                                                        • Tonnage: 250T
                                                                                                        • Tonnage: 250T
                                                                                                        • Tonnage: 250T
                                                                                                          TSUGAMI BS-32C MARK III CNC SWISS TYPE LATHE (2006)
                                                                                                          $RFQ
                                                                                                          TSUGAMI BS-32C MARK III CNC SWISS TYPE LATHE (2006)
                                                                                                          GENERAL SPECIFICATIONS Control: Fanuc 18iTB Maximum Bar Diameter: 1 1/4" Z1-Axis Travel (synchronous to "Z2"): 9.75" Main Spindle: Spindl
                                                                                                          Mori Seiki SH-63 HMC
                                                                                                          $RFQ
                                                                                                          Mori Seiki SH-63 HMC
                                                                                                          PALLETS (X) 24.8" X 24.8" LOAD CAPACITY 2640 LBS PALLET CHANGING TIME 15 SEC TABLE INDEXING TIME 2.3 SEC TABLE INDEXING 1-DEGREE CUTTING FEEDRATES 0.01-630 IPM RAPID TRAVERSE RATE XYZ 12
                                                                                                          • X axis: 33.1"
                                                                                                          • X axis: 33.1"
                                                                                                          • X axis: 33.1"
                                                                                                            Mazak Integrex 400-4 Multi-Tasking CNC Lathe (2008)
                                                                                                            $RFQ
                                                                                                            Mazak Integrex 400-4 Multi-Tasking CNC Lathe (2008)
                                                                                                            Specifications: Maximum Swing........................... 30" NOTE: Tool eye body may limit max. swing. Maximum Swing using Y-axis.............. 26"-30" Maximum Swing over Cross Slide.......... 30" Maximu
                                                                                                            MORI SEIKI SH5000/40(2) MACHINE 24 PALLET CNC HORIZONTAL FMS SYSTEM (2002)
                                                                                                            $RFQ
                                                                                                            MORI SEIKI SH5000/40(2) MACHINE 24 PALLET CNC HORIZONTAL FMS SYSTEM (2002)
                                                                                                            SPECIFICATIONS: (26) 19.7" PALLETS X Axis Travel :..........31" Y Axis Travel :..........27" Z Axis Travel :..........27" Tool Stations :..........240 TOOLS 4th AXIS ................360,000 DEG Motor Power : SPIN
                                                                                                            • X axis: 31"
                                                                                                            • X axis: 31"
                                                                                                            • X axis: 31"
                                                                                                              Mori Seiki NL-1500-SY Turning Center (2010)
                                                                                                              $RFQ
                                                                                                              Mori Seiki NL-1500-SY Turning Center (2010)
                                                                                                              Specifications: Bar Cap: 2" Chuck Size: 6" Spindle Speed: 6000 Turning Dia.: 14" Swing over bed: 36" Swing over Cross slid
                                                                                                              • Swing: 36"
                                                                                                              • Swing: 36"
                                                                                                              • Swing: 36"
                                                                                                                Mori Seiki NT3150 DCG/1500SZ (2006)
                                                                                                                $RFQ
                                                                                                                Mori Seiki NT3150 DCG/1500SZ (2006)
                                                                                                                Specifications (To Be Verified): Chuck Size: 6" Main and Sub Standard Bar Capacity: 2-1/8" Between Centers: 59.1" Turning Diameter:
                                                                                                                Studer S40 CNC Cylindrical Grinder (1993)
                                                                                                                $RFQ
                                                                                                                Studer S40 CNC Cylindrical Grinder (1993)
                                                                                                                SPECIFICATIONS Spec Inch Metric Control Fanuc 16GC Year 1993 Wheelhead Angle/Straight" 0mm Center Height 6.875" 175mm Center Distance 40" 1016mm Max Workpiece Weight 287 lbs 130 kg
                                                                                                                Cincinnati Gilbert 3.5” Horizontal Boring Mill
                                                                                                                $RFQ
                                                                                                                Cincinnati Gilbert 3.5” Horizontal Boring Mill
                                                                                                                Cincinnati Gilbert 3.5” Diameter Table Style Horizontal Boring Mill w/Trak 102 2-Axis Digital readout system General Specifications Table Size ----------------------------------------- 53" x 78-1/2", Table Travels---
                                                                                                                • Spindle diameter: 3.5"
                                                                                                                  Milford Model 255 Riveter
                                                                                                                  $RFQ
                                                                                                                  Milford Model 255 Riveter
                                                                                                                  Capacity: Up to .125" (3.17 mm) diameter x .562" (14.28 mm) long, mild steel semi-tubular rivets; Throat depth: 12.00" (304.8 mm) Hopper type: 5.25 dia. mechanical Ram stroke: 2.50" (63.5 mm) Machine cycle time: 0.4
                                                                                                                  20" BLANCHARD VERTICAL SPINDLE ROTARY SURFACE GRINDER (1970)
                                                                                                                  $RFQ
                                                                                                                  20" BLANCHARD VERTICAL SPINDLE ROTARY SURFACE GRINDER (1970)
                                                                                                                  TABLE DIAMETER:......................................................... 20" MAXIMUM SWING INSIDE SPLASH GUARDS:........... 20-1/2" MAXIMUM WORK HEIGHT UNDER NEW 11" DIA. CYLINDER GRINDING WHWEEL:...................
                                                                                                                  Hurco TMM10 3 Axis Turning Center (2008)
                                                                                                                  $RFQ
                                                                                                                  Hurco TMM10 3 Axis Turning Center (2008)
                                                                                                                  Specifications: Travel: 9.8 X, 29.5 Z in Max. Turning Dia: 11.6 in Max. Turning Length: 27.6 in Max. Bar Capacity: 3 in Spindle: 3k, 350 ft-lbs @ 360 Live Tool
                                                                                                                  Mazak QT-20 (1997)
                                                                                                                  $RFQ
                                                                                                                  Mazak QT-20 (1997)
                                                                                                                  SPECIFICATIONS: Year 1997 Control Mazatrol T-Plus Swing 17.32" Turning Diameter 11.81" Centers Distance 17.5" Travels (X) 7.125" Travels (Z) 20.125" Rapid Traverse (X) 1,200 IPM Rapid Traverse (
                                                                                                                  • Swing: 17.32"
                                                                                                                  • Centers: 17.5"
                                                                                                                    MAKINO S56 (2007)
                                                                                                                    $RFQ
                                                                                                                    MAKINO S56 (2007)
                                                                                                                    SPECIFICATIONS: TRAVELS (X) 35.4" (Y)19.7" (Z) 19.7" SPINDLE SPEED 13,000 RPM SPINDLE NOSE CAT 40 RAPID TRAVERSE 1574 IPM CUTTING FEEDRATE 1574 IPM MAX TABLE LOAD 1,100 LBS
                                                                                                                    • X axis: 35.4"
                                                                                                                    • Y axis: 19.7"
                                                                                                                      AMADA 50 TON PRESS BRAKE
                                                                                                                      $RFQ
                                                                                                                      AMADA 50 TON PRESS BRAKE
                                                                                                                      CATALOG SPECIFICATIONS: Overall Length of Die Surface ........................ 96" (8') Maximum Bending Length................................ 96" (8') Distance Between Housings ............................ 80.8"
                                                                                                                      • Tonnage: 50T
                                                                                                                        SKODA W 150 HBM (1998)
                                                                                                                        $RFQ
                                                                                                                        SKODA W 150 HBM (1998)
                                                                                                                        Spindle Diameter: 5.9" Spindle Taper: #50 With Power Draw Bar Spindle Travel (Z-Axis): 39" Quill Size: 15" x 15" Quill Travel (W Axis): 31" Spindle Speeds: 2-2300 RPM Spindle Drive Motor: 68 Horse
                                                                                                                        • Spindle diameter: 5.9"
                                                                                                                        • X axis travel: 393"
                                                                                                                          LVD 240 Ton Hydraulic Down Acting Press Brake (1995)
                                                                                                                          $RFQ
                                                                                                                          LVD 240 Ton Hydraulic Down Acting Press Brake (1995)
                                                                                                                          Specifications: Capacity: 240 Ton Bed Plate: 15’ 11.5” Ram: 13’ 9.5” Distance Between Housings: 12’ 4” Daylight: 20” to bed / 16” to plate Stroke: 8” Shut Height to bed: 12” Shut Height to plate: 8” Hydraulic
                                                                                                                          • Tonnage: 240T
                                                                                                                            MATTISON 18-36 ROTARY SURFACE GRINDER
                                                                                                                            $RFQ
                                                                                                                            MATTISON 18-36 ROTARY SURFACE GRINDER
                                                                                                                            Magnetic Chuck Diameter: 36” Maximum Swing Inside Guards: 38” Grinding Wheel Diameter: 18” Vertical Capacity, Wheel to Chuck: 12”
                                                                                                                            Blanchard 32-60
                                                                                                                            $RFQ
                                                                                                                            Blanchard 32-60
                                                                                                                            SPECIFICATIONS: DIAMETER OF MAGNETIC CHUCK.............. 60" APPROXIMATE CHUCK LIFE.................. 5/8" DIAMETER OF GRINDING WHEEL.............. 32" SWING INSIDE WATER GUARDS............... 74" MAX. DIST. UNDER A
                                                                                                                            • Chuck: 60"
                                                                                                                              Makino A100E (2002) HMC
                                                                                                                              $RFQ
                                                                                                                              Makino A100E (2002) HMC
                                                                                                                              Specification: Control Pro 3 (Fanuc) Pallets (2) 39.4" x 39.4" Max. Weight on Pallet 6,600 lbs Max. Workpiece 74.8" x 59.1" TRAVELS: X-Axis 66.9" Y-Axis 53.1" Z-Axis 53.1" Spindle Motor 40 Max. Spindle Spee
                                                                                                                              • X axis: 66.9"
                                                                                                                              • Y axis: 53.1"
                                                                                                                                AMADA 100 TON
                                                                                                                                $RFQ
                                                                                                                                AMADA 100 TON
                                                                                                                                Ask for more details
                                                                                                                                • Tonnage: 100T
                                                                                                                                  DOOSAN MV-6030 VERTICAL MACHINING CENTER(2007)
                                                                                                                                  $RFQ
                                                                                                                                  DOOSAN MV-6030 VERTICAL MACHINING CENTER(2007)
                                                                                                                                  SPECIFICATIONS: X-AXIS TRAVEL........................... 60" Y-AXIS TRAVEL........................... 30" Z-AXIS TRAVEL........................... 24.6" DISTANCE FROM SPINDLE NOSE TO TABLE TOP. 5.9" TO 30.5" DISTANC
                                                                                                                                  • X axis: 60"
                                                                                                                                  • Y axis: 30"
                                                                                                                                    Mori Seiki SL-3B (1981)
                                                                                                                                    $RFQ
                                                                                                                                    Mori Seiki SL-3B (1981)
                                                                                                                                    Specifications: Swing Over Bed: 22.4" Swing Over Cross Slide:13.8" Maximum Cutting Diameter:10.2" Maximum Turning Length: 22.0" Distance Between Centers: 24.0" Travels – X-Axis: 6.3" - Z-Axis: 22.0"
                                                                                                                                    • Swing: 22.4"
                                                                                                                                    • Centers: 24"
                                                                                                                                      Doosan HC 400 (2007)
                                                                                                                                      $RFQ
                                                                                                                                      Doosan HC 400 (2007)
                                                                                                                                      Specifications: Pallet Size / Number of Pallets: 15.7" x 15.7" / 2 plts Table Indexing: 1 Degree Indexing Table Load Capacity: 882 lbs. X-Axis Travel: 23.6" Y-Axis Travel: 22" Z-Axi Travel: 22.2" Spindle Nose: CAT
                                                                                                                                      • X axis: 23.6"
                                                                                                                                      • Y axis: 22"
                                                                                                                                        DOOSAN PUMA 480L (2011)
                                                                                                                                        $RFQ
                                                                                                                                        DOOSAN PUMA 480L (2011)
                                                                                                                                        Fanuc 21iM CNC control, 35.4" sw. over bed, 25.6" max. turning dia., 80.4" max. turning length, 10-1/2" spndl. bore, 3-750 RPM, front and rear chucks, 60HP, SMW Mdl. SLU-5.25 hyd. steadyrest, 12-pos. vert. turret, tails
                                                                                                                                        • Swing: 35.4"
                                                                                                                                        • Centers: 80.4"
                                                                                                                                          DOOSAN PUMA 800L (2012)
                                                                                                                                          $RFQ
                                                                                                                                          DOOSAN PUMA 800L (2012)
                                                                                                                                          Fanuc Series 32i-Model A CNC control, 40'6" sw. over bed, 31.5" sw. over saddle, 35.43" max. turning dia., 125.98" max. turning length, spds: 750 RPM, 60 HP, 12-1/2" spndl. bore, 10.5" bore front and rear chucks, 12-sta
                                                                                                                                          • Swing: 40.6"
                                                                                                                                          • Centers: 126"
                                                                                                                                            DAH LIH HC2000 (2012)
                                                                                                                                            $RFQ
                                                                                                                                            DAH LIH HC2000 (2012)
                                                                                                                                            SPECIFICATIONS: Spindle Diameter 5.12" Taper in Spindle 50 Spindle Speed 2500 RPM Travels Vertical Y-Axis 80.7" Table Travel X-Axis 157.5" Spindle Travel Z-Axis 5
                                                                                                                                            • X axis: 78.7"
                                                                                                                                            • Y axis: 39.4"
                                                                                                                                              18" x .070" x 6,000Lb Morvay Slitting Line
                                                                                                                                              $RFQ
                                                                                                                                              18" x .070" x 6,000Lb Morvay Slitting Line
                                                                                                                                              Material Width: 18" Weight Capacity: 6,000Lb Material Thickness: .008" - .070" Coil ID: 20" Coil OD: 72" Direction: Left to Right Mandrel Uncoiler Disc Brake Powered Mandrel Expansi
                                                                                                                                              • Maximum workpiece width: 18"
                                                                                                                                              • Maximum workpiece thickness: 0.07"
                                                                                                                                                Categories:
                                                                                                                                                Condition:
                                                                                                                                                • X Used (1286)
                                                                                                                                                Manufacturer:
                                                                                                                                                Location:
                                                                                                                                                • X Michigan (1286)
                                                                                                                                                Price:
                                                                                                                                                •  to 
                                                                                                                                                1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>