Specifications:
Maximum Swing........................... 30"
NOTE: Tool eye body may limit max. swing.
Maximum Swing using Y-axis.............. 26"-30"
Maximum Swing over Cross Slide.......... 30"
Maximum Cutting Diameter: Chucking...... 30"
Maximum Cutting Length 60" Universal.... 59.2"

MAIN SPINDLE SPECIFICATIONS:
Spindle Nose............................ A2-8
Spindle Bore............................ 4.4"
Maximum Bar Work.... ................... 4.0" Dia.
Spindle Speed/Ranges.................... 3,300 RPM
Spindle Index (Programmable)............ 0.0001 Deg.
Spindle Horsepower (Cont/30min)......... 40/40 HP (AC)
Spindle Torque.......................... 1033 ft-lbs

TURRET AND TOOLING SPECIFICATIONS:
Type of Turret.......................... 1 Position w/ ATC
Tool Shank Height....................... 1"
Tool Size (Boring Bar Max. Dia.)........ 1.5"
Magazine Capacity....................... 40 Tools
Tool Selection Method................... Random
Tool to Tool ATC Time................... 1.3 Sec.
Max. Tool Dia. w/All Pockets Full....... 3.54"
Max. Tool Dia. w/Adjacent Pockets Empty. 4.92"
Max. Tool Length (From Gage-Line)....... 15.75"
Maximum Tool Weight..................... 22 lbs.
ATC Tool Shank.......................... KM63
Rotary Tool Spindle Speed............... 12,000 RPM
Rotary Tool Spindle Horsepower (20%ED).. 25 HP (AC)
Rotary Tool Torque (20%ED).............. 88.5 ft-lbs.
Maximum Face Mill....................... 4"
Maximum End Mill........................ 1.25"
Maximum Drill........................... 1.25"
Maximum Tap............................. 1-8 UNC

AXIS TRAVELS:
B-Axis.................................. 225 degrees
(0.0001 degree increments)
Y-Axis.................................. +/- 4.53"
X-Axis.................................. 24.8"
Z-Axis 60" Universal.................... 62.41"

AXIS RAPID RATES:
Y-Axis.................................. 1024 IPM
X-Axis.................................. 1496 IPM
Z-Axis.................................. 1496 IPM
C-Axis.................................. 555 RPM
Servo Driven Tailstock........ 240 IPM

TAILSTOCK (FOR UNIVERSAL):
Spindle Center.......................... MT#5
Body Travel 60" Universal............... 60.83"
Thrust.................................. 2,246 lbs.

GENERAL SPECIFICATIONS:
Floor Space for 60" Universal (WxL)..... 193.4" x 92.24"
Machine Height....................................... 114.6"
Total Power Required (Machine Only)..... 51.5 KVA
NOTE: Actual Machine Main Transformer
KVA Rating Will be Greater.
Air Requirements........................ 72.5 PSI/24.7 CFM
Machine Weight for 60" Universal........ 28,220 lbs.

NOTE: The machine's CNC control resolution and the machine's
"B" and "C" axis resolution are not guaranteed
statements of the machine's positioning accuracy or
repeatability.

Equipped With:
Mazatrol Matrix Control
Kitagawa B15 15” Hydraulic Chuck
40 ATC
C-Axis 0.0001 Deg
B-Axis 0.0001 Deg
Chip Conveyor
Renishaw MP-700 Probe
All Available Tooling

This machine is listed for sale by International Machine located in Orion Township, Michigan