AXIS TRAVELS:
CNC Controlled Axis: 4 (X,Y,Z,&C)
X-Axis Travel (Vertical Tool): 7.5"
Y-Axis Travel (Cross Tool): 11.4"
Z-Axis Travel (Sliding Headstock): 6.5"
C-Axis Travel (Rotational Axis): 360,000 radial pos.
SPINDLE:
Spindle Bore (Usable bar diameter): 1.25"
Spindle Speed Range: 100-6,000 RPM
Spindle Horsepower: 5-HP
Spindle Center Height: 38"
Spindle Collet Type: Traub A-32
STATIC TOOLS:
Number and size of turning tools: 6 Tool Stations of �"
Number of Internal Static Tools (bushings/collets): 5 ID tool stations
I.D. Tool Bores (Round Shank): 25mm bore
LIVE TOOLS:
Number of cross working driven tools: 4
Number of axial (end working) live tools: 3
Size of driven tools (round shank): 1/16" � �"
Rigid Tapping with Driven Tools: YES
Driven Tool programmable range: 0-6,000 RPM stepless
Driven Tool HP: 1.0 HP
AXIS DRIVES:
Rapid Travers Rate � X,Y,&Z axis: 708 ipm
Maximum federate for thread cutting: 236 ipm
Minimum Programmable Input: 0.000039"
C-Axis Resolution: 0.001 degree
Brushless AC Servo Motor Drive (X / Y & Z): 1.5 HP / .75 HP
Ballscrew diameter: 25 mm
REQUIREMENTS:
Connected Load Power Consumption: 16 KVA
Connected Load Amperage: 42 amps
Connected Load Input Voltage Required: 208-240 vac
Pneumatic Requirements: 80 � 90 psi @ 1 cfm
Coolant Pump Motor/ Tank Capacity: � HP / 25 gallon tank
Automatic Metered Lubrication: 3-6cc/15-minute
DIMENSIONS:
Floor Space � L X W: 83" X 52"
Machine Height: 75"
Machine Net Weight: 5,292 lbs
Equipped With:
Mitsubishi / Ganesh 4-Axis Control
Rigid Tapping on Main Spindle
Double-nut NSK ballscrews
Mist buster 500
Edge technologies Patriot 338, 8Ft. bar feeder
Small tools box
Phase perfect 70Amp phase converter
Line input transformer
7/8 Traub main chuck collet now
21 live tool collets of various sizes
15 static tool holders
1 Ntk, and 3 Iscar cutting tools with 10 inserts� ea.
30 new assorted carbide, mills, drills, and solid cutters
25 gallons assorted machine fluids, Mobil, Blaser
Comments:
Used for less than 800 parts
Uses oil-based coolant (standard pressure)

This machine is listed for sale by International Machine located in Orion Township, Michigan