buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Used > Okuma > Michigan

Used Okuma Machine Tools in Michigan

27 used Okuma machine tools items for sale in Michigan
1 | 2
Refine: Viewing 1 - 20 of 27 matches
Sort by:
Items Per Page:  20  |  50 |  100
Okuma Ace Center MB-56VB (2007) CNC Vertical Machining Center  12000 RPM
Number of axes : 3 MILLING SPINDLE - Tool holder type : BT50 - Spindle power : 22 [kW] - Spindle speeds : 12000 RPM LINEAR AXES - Travels on X/Y/Z axes : 1050/560/460 [mm] - Rapid traverses rates (X/Y/Z) : 4
Okuma Captain L370BB CNC Lathe, OSP E100 Control, 10" Chuck, 20.47&quo
Specifications: Chuck Size: 10 inches Swing: 20.8 inches Turning Diameter: 13.3 inches Center Distance: 20.47 inches Bar Capacity: 2.75 inches Spindle Bore: 3.15 inches X Axis Travel: 10.23 inches
OKUMA Intelligent Multitasking Model MULTUS B200II (W} with OSP-P300S CNC C
OKUMA Intelligent Multitasking Model MULTUS B200II (W} with OSP-P300S CNC Controller (15 inch OSP suite) Including CE mark 2017 Standard Specification Main spindle motor PREX 11/7.5kW (20 min./cent) Main spindle sp
OKUMA CNC TURNING CENTER CAPTAIN L370 BB
OKUMA CNC TURNING CENTER MODEL: CAPTAIN L370 BB SERIAL: 01-2001-0015 AGE: 2001 CONTROL: OSP-E100L CUTTING HOURS: 7,160 MAX SWING OVER BED: 20.08” MAX TURNING DIA: 14.56” MAX TURNING LENGTH: 20.47” SPINDLE BORE:
OKUMA LU-S1600-2SC X 1000
OKUMA LU-S1600-2SC X 1000 Built Nov. 2014 Installed Mar. 2017 OSP-P300L control 725 cutting hours Machining NAVI (microphone system to adjust VSS and reduce chatter) Okuma steady rest interface (electronics and sof
Okuma Crown Lathe Type 762S-BB  OSP-700L control
Okuma Crown Lathe Type 762S-BB OSP-700L control Installed 11/97 S/N: 09100308 10 inch SMW quick change chuck model THW 265-71 Chip conveyor Hennig KMO-0320-00 Royal filtermist F275 Zebra oil skimmer 30Kva three
Okuma LB15 BB CNC Lathe
Okuma LB15 BB CNC Lathe Year 1988 S/N 2365 General Specifications Bar capacity 2.5" Spindle bore 3" Swing Over Bed 15.75” Max Turning Diameter 9.84” Max Work Length 19.68” X-Axis Travel (Cross-Slid
Okuma LC30 12" chuck Tailstock OSP5000L-G Control
Okuma LC30 12" chuck Tailstock OSP5000L-G Control
OKUMA CADET V4020 CNC VERTICAL MACHINING CENTER, 1995
OKUMA CADET V4020 CNC VERTICAL MACHINING CENTER, 20 TOOL, 40 TAPER S/N 0041, Travels, X 40", Y 20", Z 20", Table 20.8 x 47", 40 Taper, 15 H.P
OKUMA MAC TURN 250-W CNC MULTI AXIS LATHE
OKUMA MAC TURN 250-W CNC MULTI AXIS LATHE YEAR 2004 S/N 108979 SPECIFICATIONS: ===================================================== Control OSP E100 Number of Axis 7 Chuck Size 8 Swing 21.65 Turning Dia
Okuma LT25 CNC Lathe  Year      2000
Okuma LT25 CNC Lathe Year 2000 Serial Number 0073 Control OSP U100L Number of Axis 4 Chuck Size 12″ Swing 19.67″ Turning Diameter 11.81″ Center Distance
Okuma MC40VA - Vertical Machining Center
Okuma MC40VA - Vertical Machining Center Year: 1995 Specifications: Table Size(Inches)....................39.37 x 20.08 Load Capacity(lbs).............................1100 Table Surface to Floor Level(Inches)......
Okuma LB2000 EX II
Swing Over Bed: 22'' Distance Between Centers: 10'' - 20'' Highest Spindle Speed (RPM): Over 5000 Hole Thru Spindle: 2.44 OSP3000L Control Very Low Hours !!! Cut Only Aluminum Machine Is Equipped With Live Mill
  • Swing: 22"
  • Centers: 20"
    OKUMA LT-25 TWIN SPINDLE TWIN TURRET CNC TURNING CENTER (2000)
    MANUFACTURED IN 2000 SERIAL NUMBER: 0082 MAX TURNING DIAMETER................................................ 11.81" MAX SWING.......................................................................... 19.67&qu
    • Swing: 19.67"
    • Centers: 60"
      OKUMA LNC-8 CNC TURNING CENTER (1996)
      YEAR NEW........... 1996 S.N. ........................ D823 MAX SWING 15.75" LONGITUDINAL TRAVEL 19.89" MAX TURNING 9.84" SPINDLE BORE 2.2" MAIN MOTOR 15 HP SPINDLE SPEED 4200 RPM TURRET
      • Swing: 15.75"
      • Centers: 19.89"
        Okuma Millac 5-Axis Vertical Machining Center (1980)
        Okuma Millac 5-Axis Vertical Machining Center (1980)
        OKUMA MX-55VA (1998)
        EQUIPPED WITH: OSP 700M CNC Control, RS-232 Port, Manual Pulse Generator, 20 Position Automatic Tool Changer, Full Enclosure, Chip Conveyor, Coolant System. CATALOGUE SPECIFICATIONS: Table Working Surface..
        • X axis: 41"
        • Y axis: 22"
          OKUMA MA-400HA HMC (2009)
          Pallet Size 15.75" (2) Travel: X-Axis 22.05" Y-Axis 24.01" Z-Axis 24.61" Pallet Index .001 Degrees Spindle Speed 50 - 15,000 RPM Spindle Taper Cat 40 Spindle Motor 20 / 15 HP Spindle Center to
          • X axis: 22.05"
          • Y axis: 24.01"
            Okuma MU-400VA(2007)
            X-axis (saddle left/right): 30" Y-axis travel (pallet front/back): 18.11" Z-axis (spindle up/down: 18.11" A-axis Positioning: +20 ~ -110 C-axis Positioning:
            • X axis: 80"
            • Y axis: 18.11"
              MODEL MAB-80H 5-AXIS OKUMA HORIZONTAL MACHINING CENTER, 2004
              center> EQUIPPED WITH: Okuma OSP-E100M-H Control -115deg. +225 A-Axis Trunnion Table 360deg. B-Axis 1000 PSI Thru Spindle Coolant 72 Station Auto Tool Changer Chip Conveyor Hydraulic Unit Absolute Scales X
              Condition:
              • X Used (27)
              Manufacturer:
              • X Okuma (27)
              Location:
              • X Michigan (27)
              Price:
              •  to 
              1 | 2