Machine Tools in Pennsylvania For Sale, New & Used

CINCINNATI MODEL 1810 MECHANICAL SHEAR, 10’ x 1/4”

$RFQ

SPECIFICATIONS THICKNESS: 1/4” LENGTH: 10’ DISTANCE BETWEEN HOUSINGS: 10’3” MOTOR: 7 HP SPEED: 60 SPM FLYWHEEL SPEED: 1,200 RPM FRONT GAUGE RANGE: 47” BACK GAUGE RANGE: 36” HOLD DOWNS TO KNIFE EDGE: 5/8&quo

Bethlehem, PA
View Listing

Lubow Wire Ring Roller Model AR 250 D

$RFQ

No description providedMaximum Wire Diameter.250" Maximum Ring Diameter36" Minimum Ring Diameter1" Maximum Speed9000 4" Rings Per Hour Maximum Cuts Per Minute150 Feed Accuracy+/- .005"

Ivyland, PA
View Listing

2005 CITIZEN K16VII SLIDING HEADSTOCK TYPE 7-AXIS CNC AUTO LATHE, 16 mm

$RFQ

RAN OIL AXES: 7 MAIN SPINDLE MAXIMUM MACHINING DIAMETER: .63" MAXIMUM MACHINING LENGTH: 7.87" MAXIMUM FRONT DRILLING DIAMETER: .39” MAXIMUM FRONT TAPPING DIAMETER: M8 (TAP), M6 (DIE) SPINDLE

Spindle hole diameter: 0.63"

Bethlehem, PA
View Listing

2005 CITIZEN K16VII SLIDING HEADSTOCK TYPE 7-AXIS CNC AUTO LATHE, 16 MM

$RFQ

MAIN SPINDLE MAXIMUM MACHINING DIAMETER: .63" MAXIMUM MACHINING LENGTH: 7.87" MAXIMUM FRONT DRILLING DIAMETER: .39” MAXIMUM FRONT TAPPING DIAMETER: M8 (TAP), M6 (DIE) SPINDLE THROUGH HOLE DIAMETE

Spindle hole diameter: 0.63"

Bethlehem, PA
View Listing

SHARP MODEL 1740K HEAVY DUTY GAP BED ENGINE LATHE, 17" X 40"

$RFQ

CAPACITIES SWING OVER BED: 17" SWING OVER GAP: 17-1/4" SWING OVER CARRIAGE: 11" BAR CAPACITY THRU SPINDLE: 3" DISTANCE BETWEEN CENTERS: 40" BED WIDTH: 12” HEADSTOCK SPINDLE NOSE: D1-6 CAMLOC

Swing: 17"
Centers: 40"

Bethlehem, PA
View Listing

LEBLOND MAKINO REGAL INCH-METRIC SERVO SHIFT ENGINE LATHE, 19" X 102&q

$RFQ

CAPACITY SWING OVER BED AND CARRIAGE WINGS: 19-1/4" SWING OVER CROSS SLIDE: 12-1/4" DISTANCE BETWEEN CENTERS: 102" HEADSTOCK SPINDLE SPEEDS, NUMBER: 12 SPINDLE SPEED RANGE: 40 TO 1,600 RPM SPINDLE

Swing: 19"
Centers: 102"

Bethlehem, PA
View Listing

2006 Southwestern Industries Trak Sport K2 3-Axis CNC Knee Mill, 9" x

$RFQ

TABLE TABLE SIZE: 49” X 9” T-SLOT: 5/8" X 3" X 2-1/2" TABLE LOAD CAPACITY: 750 LBS TRAVEL LONGITUDINAL TRAVEL: 33" SADDLE TRAVEL: 12" RAM TRAVEL: 12” QUILL TRAVEL: 5" SPIN

Bethlehem, PA
View Listing

Manville Shank Slotter

$RFQ

No description provided

Ivyland, PA
View Listing

Mitsubishi FX-10 5-Axis Wire EDM Machine

$RFQ

No description providedX-Axis Travel13.77" Y-Axis Travel9.84" Z-Axis Travel35.4" U-Axis1.25" V-Axis1.25" Table Size24.8" x 20.86" Max. Work-Piece Weight500 lbs Wire Diameter Range0.012" to 0.008" Wire Spooling Speed0 to

X axis travel: 13.77"
X axis travel: 13.77"
Y axis travel: 9.84"

Ivyland, PA
View Listing

1988 HARDINGE MODEL HLV-H TOOLROOM LATHE, 11" X 18", EXCELLENT

$RFQ

SPECIFICATIONS SWING OVER BED: 11" SWING OVER CARRIAGE: 9" SWING OVER CROSS SLIDE: 6" DISTANCE BETWEEN CENTERS: 18" SPINDLE NOSE: 5C HARDINGE TAPER NOSE VARIABLE SPINDLE SPEEDS: 125 TO 3000 RP

Swing: 11"
Centers: 18"

Bethlehem, PA
View Listing

2001 OKAMOTO MODEL ACC-6.18DX 3-AXIS HYDRAULIC SURFACE GRINDER, 6" X

$RFQ

CAPACITIES WORKING SURFACE: 6” X 20” GRINDING WHEEL TO TABLE SURFACE: 11.7” TABLE LOAD CAPACITY: 264 LBS LONGITUDINAL FEED: .33 – 66 FPM INTERMITTENT HYDRAULIC CROSS FEED: .004” - .02” AUTO DOWN FEED TRA

Chuck: 8"

Bethlehem, PA
View Listing

2005 KENT MODEL KGS-616S MANUAL SURFACE GRINDER, 6" X 16"

$RFQ

SPECIFICATIONS CAPACITIES LONGITUDINAL TABLE TRAVEL: 16.9” CROSS FEED TABLE TRAVEL: 7.9” WORKING SURFACE: 6” X 16” SPINDLE CENTER TO TABLE TOP: 17.3” GRINDING WHEEL SIZE: 8” X 3/4” X 1-1/4” SPINDLE SPEE

Chuck: 6"

Bethlehem, PA
View Listing

2001 HAAS MINI MILL VERTICAL MACHINING CENTER WITH HAAS CONTROL

$RFQ

ONLY 2,000 SPINDLE ON HOURS! SPECIFICATIONS TRAVELS X-AXIS: 16" Y-AXIS: 12" Z-AXIS: 10" TABLE LENGTH (TOTAL): 36" LENGTH (WORK SURFACE): 28.75" WIDTH: 12" MAXIMUM WEIGHT ON

X axis: 16"
Y axis: 12"

Bethlehem, PA
View Listing

BRIDGEPORT SERIES I VARIABLE SPEED MILL, 2-AXIS PROTO TRAK SM CNC CONTROL

$RFQ

Control New 2007, Machine New 1997 SPECIFICATIONS TABLE TRAVEL (X-AXIS): 30" SADDLE TRAVEL (Y-AXIS): 12" KNEE TRAVEL (Z-AXIS): 16" QUILL TRAVEL: 5" RAM TRAVEL: 12" MINIMUM THROAT DISTANCE:

Table width: 48"
Table length: 8"

Bethlehem, PA
View Listing

2004 CLAUSING KONDIA FV1 CNC Vertical Knee Mill with 3-Axis Control, 9"

$RFQ

TABLE STANDARD SIZE: 9" X 48" NUMBER OF T-SLOTS: 3" T-SLOT WIDTH: 5/8" T-SLOT CENTER DISTANCE: 2-9/16" TRAVELS LONGITUDINAL (X-AXIS): 36" SADDLE TRAVEL (Y-AXIS): 15" KNEE TRAV

Bethlehem, PA
View Listing

ROCKWELL DELTA MODEL 31-710 BELT/DISC SANDER, 6” BELT/12” DISC

$RFQ

BELT BELT SIZE: 6” X 48” TABLE SIZE: 7-3/8” X 14-3/4” TABLE TILT: 45° OUT / 20° IN BELT SPEED: 3,030 SFPM DISC DISC SIZE: 12” TABLE SIZE: 9-3/4” X 16-1/4” TABLE TILT: 45

Width: 6"

Bethlehem, PA
View Listing

1995 SPARTAN PHOENIX MODEL PA10 AUTOMATIC HORIZONTAL BANDSAW, 8” X 12”

$RFQ

CAPACITY RECTANGULAR: 8" X 12" ROUND: 10" BLADE SIZE LENGTH: 111' 6" WIDTH/GAUGE: 1" X .035" BLADE SPEED INFINITELY VARIABLE: 70 -278 SFPM FEED FORCE INFINITELY VARIA

Width capacity: 12"
Height capacity: 8"

Bethlehem, PA
View Listing

2005 PUCKMASTER MODEL 1622SE CHIP SHREDDING MACHINE, 2,500 LBS/HOUR

$RFQ

SPECIFICATIONS CHIP CAPACITY: 2,500 POUNDS PER HOUR MOTOR: 30 HP MAIN PUMP: 20 GPM HYDRAULIC TANK: 80 GALLON DISCHARGE CONVEYOR: 12” WIDE INFEED HOPPER: 1 YARD GENERAL FLOOR SPACE: 12’2” LR X 8’7” FB X 8’6”

Bethlehem, PA
View Listing

2013 MA-550VB VERTICAL MACHINING CENTER, 51.58” X 22” X 22”, LOW HOURS

$RFQ

TRAVELS X-AXIS TRAVEL: 51.58” Y-AXIS TRAVEL: 22.04” Z-AXIS TRAVEL: 22.04” TABLE TO SPINDLE NOSE: 7.87” – 35.03” COLUMN FRONT TO TABLE CENTER: 12.99” – 35.03” TABLE TABLE SIZE: 51.18” X 22.04” FLOOR TO TABL

X axis: 51.58"
Y axis: 22.04"

Bethlehem, PA
View Listing

Okamoto Linear Model 618 6"X 18" Surface Grinder

$RFQ

No description providedGrinding Width Capacity6" Grinding Length Capacity18" Maximum Height Under Wheel to Table11" Maximum Longitudinal Table Travel8" Grinding Wheel Capacity8" x 1" x 1.25" Electrics460V Approx. Floor S

Table width: 6"
Table width: 6"
Table length: 18"

Ivyland, PA
View Listing

#10-400 Hartford High Speed Flat Die Thread Roller

$RFQ

No description providedProduction Rate200 - 400 PPM Die Pocket Depth3-1/8" Electrics460V Approx. Floor Size5' x 7'6" Approx. Weight5,500 lbs Screw Diameter Capacity#6 thru 3/8" Thread Length at Max. Diameterto 3" Maximum

Maximum workpiece diameter: 0.375"
Maximum workpiece diameter: 0.375"
Maximum thread length: 3"

Ivyland, PA
View Listing

1996 MATSUURA RA-IIIF VMC with APC, Yasnac Control, 31” X 17” X 19”

$RFQ

MOVEMENT & RANGES X-AXIS TRAVEL: 31.49" Y-AXIS TRAVEL: 17.32” Z-AXIS TRAVEL: 19.09" FROM PALLET SURFACE TO SPINDLE END: 5.9" – 25" FROM PALLET CENTER TO COLUMN GUIDEWAY: 9.84" - 27.16&qu

X axis: 31"
Y axis: 17"

Bethlehem, PA
View Listing

SOUTHWESTERN INDUSTRIES K3 2-AXIS CNC VERTICAL KNEE MILL, 10" X 50&quo

$RFQ

TABLE TABLE SIZE: 50" X 10" T-SLOT: 5/8" X 3" X 2-1/2" TABLE LOAD CAPACITY: 750 LBS TRAVEL LONGITUDINAL TRAVEL: 32" SADDLE TRAVEL: 15.5" KNEE TRAVEL: 16" QUILL TRAVE

Bethlehem, PA
View Listing

1983 CLAUSING COLCHESTER MODEL 8051 GEARED HEAD ENGINE LATHE, 17" x 60

$RFQ

SPECIFICATIONS SWING OVER BED: 17-1/4" SWING OVER SADDLE WINGS: 17-1/4" SWING OVER CROSS SLIDE: 10-1/2" BAR CAPACITY THRU SPINDLE: 3" DISTANCE BETWEEN CENTERS: 60" HEADSTOCK SPINDLE NOSE: D1

Swing: 17"
Centers: 60"

Bethlehem, PA
View Listing

2014 DOOSAN DNM-400II VMC, FANUC OiMD, 30" x 17" x 20" TRAV

$RFQ

TRAVELS X-AXIS TRAVEL: 30” Y-AXIS TRAVEL: 17.1” Z-AXIS TRAVEL: 20.1” SPINDLE CENTER TO TABLE TOP: 5.9” – 30.5” SPINDLE NOSE TO COLUMN: 20.2” FEED RATES RAPIDS (X/Y): 1,417 IPM RAPIDS (Z): 1,181 IPM CUTTI

X axis: 30"
Y axis: 17"

Bethlehem, PA
View Listing

Lubow WBR-1 Wire Bender

$RFQ

No description providedCapacity1/4" 8 Pieces Capacity3/8" 5 Pieces Capacity1/2" 1 Piece Table Size24" x 72" Adjustable Bend Angle0 - 135 Degree 2 Stop

Ivyland, PA
View Listing

Car-Anth Pneumatic Power Former

$RFQ

No description providedTable Size8" x 31" Center Disc6" Center Pin1/2" Foot Pedal

Ivyland, PA
View Listing

Macbee 4 Block Wire Drawing Machine

$RFQ

No description providedNumber of Blocks4 Diameter of Blocks13" Motors3 HP Speed Range0 - 600 FPM Electrics240V/60Hz/3 Phase Siemens Simoreg DC Drives<br />Oil Co

Block diameter: 13"
Block diameter: 13"

Ivyland, PA
View Listing

Macbee 6 Block Wire Drawing Machine

$RFQ

No description providedNumber of Blocks6 Diameter of Blocks13" Motors3 HP Feed Speeds (FPM)0 - 600 FPM Electrics240V/60Hz/3 Phase <ul> <li>Siemens Simoreg

Block diameter: 13"
Block diameter: 13"

Ivyland, PA
View Listing

2015 OMAX MODEL MAXIEM 1515 CNC WATERJET CUTTING, 50,000 PSI

$RFQ

SPECIFICATIONS MATERIAL SUPPORT SLATS: 4” X 14 GA GALVANIZED STEEL MAXIMUM MATERIAL LOAD: 300 LBS/SQ FT SPEED: 500 IPM INTENSIFIER PUMP: 30 HP OUTPUT PRESSURE: 50,000 PSI WORK ENVELOPE X-AXIS: 62” Y-AXIS:

Output Pressure: 50000PSI
Motor: 30HP

Bethlehem, PA
View Listing

2014 DOOSAN PUMA GT-2100 2-AXIS CNC LATHE WITH FANUC OiTD CONTROL, 8” CHUCK

$RFQ

CAPACITIES SWING OVER BED: 23.6” SWING OVER SADDLE: 15.4” RECOMMENDED TURNING DIAMETER: 8.3” MAXIMUM TURNING DIAMETER: 15.4” MAXIMUM TURNING LENGTH: 22.1” CHUCK SIZE: 8” BAR WORKING DIAMETER: 2.6” TRAVELS X-AX

Swing: 23.6"
Centers: 22.8"

Bethlehem, PA
View Listing

2010 HAAS VF-10/40 VERTICAL MACHINING CENTER, 120" x 32" x 30

$RFQ

TRAVELS X-AXIS: 120" Y-AXIS: 32" Z-AXIS: 30" SPINDLE NOSE TO TABLE: 5 – 35" TABLE LENGTH: 120" WIDTH: 28" MAX. WEIGHT ON TABLE: 4,000 LBS

X axis: 120"
Y axis: 34"

Bethlehem, PA
View Listing

1996 HARDINGE GT-27SP GANG TOOL CNC LATHE, FANUC 18T, 1-1/16" BAR

$RFQ

CAPACITIES MAXIMUM SWING: 11.063" BAR CAPACITY: 1.062" TRAVELS X-AXIS: 12" Z-AXIS: 11" X-AXIS TRAVERSE RATE: 472 IPM Z-AXIS TRAVERSE RATE: 630 IPM SPINDLE SPINDLE

Swing: 11.063"

Bethlehem, PA
View Listing

1999 CHEVALIER FSG-2A-1224H 2-AXIS HYDRAULIC SURFACE GRINDER, 12” X 24"

$RFQ

SPECIFICATIONS TABLE SIZE: 12” X 24” GRINDING LENGTH: 24" GRINDING WIDTH: 12" DISTANCE (SPINDLE CENTER TO TABLE SURFACE): 24-3/4" LONGITUDINAL MOVEMENT OF TABLE LONGITUDINAL TRAVEL, HYDRAULIC:

Table width: 12"
Table length: 24"

Bethlehem, PA
View Listing

2007 CITIZEN MODEL A20 TYPE VI SWISS STYLE TURNING CENTER, 20 MM

$RFQ

SPECIFICATIONS MAXIMUM TURNING DIAMETER: .79” MAXIMUM SPINDLE SPEED (4-STEP): 8,000 RPM MAXIMUM BACK SPINDLE SPEED: 8,000 RPM MAXIMUM PART LENGTH: 6.50” MAXIMUM DRILLING DIAMETER: .39” SPINDLE THRU HOLE DIAMETER:

Spindle hole diameter: 0.787"

Bethlehem, PA
View Listing

2015 FANUC ROBODRILL α-D21MiA5 CNC Drill/Tap Center, 4th Axis

$RFQ

TRAVELS X-AXIS: 19.7" Y-AXIS: 15.74" Z-AXIS: 20.87" TABLE TABLE SIZE: 25.6" X 15.7" LOAD CAPACITY: 660 LBS SPINDLE SPINDLE SPEED: 10,000 RPM SPINDLE TAPER: BT-30 MOTOR: 18.7 HP

X axis: 19.7"
Y axis: 15.74"

Bethlehem, PA
View Listing

2013 CNC NEW GTS-27 CNC GANG TOOL LATHE WITH FAGOR CONTROL, 1-1/16"

$RFQ

CAPACITY MAXIMUM BAR CAPACITY: 1.0625” MAXIMUM TURNING LENGTH: 7.5” MAXIMUM TURNING DIAMETER: 10” MAXIMUM SWING OVER WAYS: 13” MAIN HEADSTOCK SPINDLE NOSE: 5C HOLE THROUGH SPINDLE: 1.25” MAXIMUM CHUCK DIAM

Swing: 13"
Centers: 7.5"

Bethlehem, PA
View Listing

1988 K. O. LEE MODEL BA960 UNIVERSAL TOOL & CUTTER GRINDER, 8-1/4"

$RFQ

SPECIFICATIONS DISTANCE BETWEEN TAILSTOCKS: 22" DISTANCE BETWEEN WORKHEAD AND TAILSTOCK CENTERS: 16" DISTANCE BETWEEN WORKHEAD COLLECT AND TAILSTOCK: 17" DISTANCE BETWEEN B946 CHUCK FACE AND

Bethlehem, PA
View Listing

1994 NIAGARA MODEL HD-55-6-8 HYDRAULIC PRESS BRAKE, 55 TON X 8’

$RFQ

SPECIFICATIONS CAPACITY: 55 TONS BENDING CAPACITY: 12 GA X 8’ DIE OPENING: 7/8” DISTANCE BETWEEN HOUSINGS: 6’6” OVERALL LENGTH: 8’ STROKE: 7” OPEN HEIGHT: 15" CLOSED HEIGHT: 7” THROAT: 8-1/4” TYPE OF DR

Tonnage: 55T

Bethlehem, PA
View Listing

1975 HARDINGE MODEL HLV-H TOOLROOM LATHE, 11" X 18"

$RFQ

SPECIFICATIONS SWING OVER BED: 11" SWING OVER CARRIAGE: 9" SWING OVER CROSS SLIDE: 6" DISTANCE BETWEEN CENTERS: 18" SPINDLE NOSE: 5C HARDINGE TAPER NOSE VARIABLE SPINDLE SPEEDS: 125 TO 3000 RP

Swing: 11"
Centers: 18"

Bethlehem, PA
View Listing

1996 Hardinge GT-27SP Gang Tool CNC Lathe, 1-1/16" Bar Capacity

$RFQ

CAPACITIES MAXIMUM SWING: 11.063" BAR CAPACITY: 1.062" TRAVELS X-AXIS: 12" Z-AXIS: 11" X-AXIS TRAVERSE RATE: 472 IPM Z-AXIS TRAVERSE RATE: 630 IPM SPINDLE SPINDLE

Swing: 11.063"

Bethlehem, PA
View Listing

2016 MILLTRONICS VM2515 VMC WITH MILLTRONICS CONTROL, 25” X 15” X 20”

$RFQ

CAPACITIES TABLE: 30” X 16” X-AXIS TRAVEL: 25” Y-AXIS TRAVEL: 15” Z-AXIS TRAVEL: 20” TABLE LOAD: 1,500 LBS T-SLOT SIZE: .71” SPINDLE SPINDLE TAPER: BIG PLUS – IS NO. 40 SPINDLE NOSE TO TABLE TOP: 4 – 24” COL

X axis: 25"
Y axis: 15"

Bethlehem, PA
View Listing

2006 FADAL MODEL VMC6535HT VMC WITH FANUC CONTROL, 65” x 35” x 34”

$RFQ

TABLE TABLE SIZE: 74.8” X 26.5” FLOOR TO TABLE SURFACE: 40.3” T-SLOTS (NO. X WIDTH X SPAN): 5 X .709" X 4.92" MAXIMUM WEIGHT ON TABLE: 4,250 LBS FEED RATES CUTTING FEED RATE (X/Y/Z): .01 – 400 IPM (600

X axis: 65"
Y axis: 35"

Bethlehem, PA
View Listing

KO Lee Model S714 Surface Grinder

$RFQ

No description providedMotor1 HP Electrics230V / 60 Hz / 3 Phase Walker Magna Lock 510CL Electric Chuck (5" x 10")<br />One Shot Lube<br />Motor is Dual Wo

Ivyland, PA
View Listing

#0 National 0-500 Flat Die Thread Roller

$RFQ

No description providedDiameter.086" - .190" (#2 thru #10) Production250 - 500 PPM Blank Length Maximum3" Thread Length (Maximum)1-5/8" Approx. Floor Size5' x 6' Approx. Weight3500 lbs

Maximum workpiece diameter: 0.19"
Maximum workpiece diameter: 0.19"
Maximum thread length: 1.625"

Ivyland, PA
View Listing

#0 Hartford 0-500 Flat Die Thread Roller

$RFQ

No description providedDiameter.086" - .190" (#2 thru #10) Production250 - 500 PPM Blank Length Maximum3" Thread Length (Maximum)to 2-1/2" Approx. Weight3000 lbs Approx. Floor Size4' x 6'

Maximum workpiece diameter: 0.187"
Maximum workpiece diameter: 0.187"
Maximum thread length: 2.5"

Ivyland, PA
View Listing

3/16" Waterbury #1 2 Die 4 Blow Header

$RFQ

No description providedMaximum Cutoff Diameter3/16" Maximum Shank Length1-1/4" Maximum Cutoff Length1-3/4" Maximum Production125 PPM Heading Pressure30 Tons Approx. Weight3.000 lbs Approx. Floor Size43" x 52"

Ivyland, PA
View Listing

WILTON MODEL 2380 DIRECT DRIVE ROUND HEAVY DUTY DRILL PRESS, 33"

$RFQ

SPECIFICATIONS CAPACITY: 33” SPINDLE TO COLUMN: 16-1/2” MOTOR: 7.5 HP STEEL DRILLING CAPACITY: 2-3/4” CAST IRON DRILLING CAPACITY: 2-1/8” QUILL DIAMETER: 3.78" SPINDLE SPEEDS (12): 42 – 1,486 RPM SPINDLE

Swing: 33"
Motor: 7.5HP

Bethlehem, PA
View Listing

1975 HARDINGE MODEL HLV-H TOOLROOM LATHE, 11" X 18"

$RFQ

SPECIFICATIONS SWING OVER BED: 11" SWING OVER CARRIAGE: 9" SWING OVER CROSS SLIDE: 6" DISTANCE BETWEEN CENTERS: 18" SPINDLE NOSE: 5C HARDINGE TAPER NOSE VARIABLE SPINDLE SPEEDS: 125 TO 3000 RP

Swing: 11"
Centers: 18"

Bethlehem, PA
View Listing

2004 WASINO MODEL G-07 GANG TOOL CNC LATHE WITH LOADER, 1-1/16"

$RFQ

SPECIFICATIONS SPINDLE BORE: 1-3/4" BAR CAPACITY: 1-1/2" SPINDLE NOSE: 100mm FLAT SPINDLE SPEED, MAXIMUM: 6,000 RPM SPINDLE MOTOR, DUTY RATED: 7.5 HP SPINDLE CENTER HEIGHT: 39-3/8" X-AXIS TRAVEL:

Bethlehem, PA
View Listing

buy & sell, new & used machinery, machine tools & equipment

Machines currently for sale:

Machine Tools in Pennsylvania For Sale