buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Machining Centers - CNC > Pennsylvania

CNC Machining Centers in Pennsylvania For Sale

53 new & used cnc machining center items for sale in Pennsylvania
1 | 2 | 3
Refine: Viewing 1 - 20 of 53 matches
Sort by:
Items Per Page:  20  |  50 |  100
SOUTHWESTERN INDUSTRIES-TRAK VERTICAL MACHINING CENTER
SOUTHWESTERN INDUSTRIES TRAK VERTICAL MACHINING CENTER PRICE: Loaded on Truck, Our Warehouse, York, PA …………… $49,500.00 HMC Stock # 21135 Machine Serial No.: 181DJ045 Machine Model No.: LPM New Date: 2018 Table Siz
MAKINO SNC64 CNC VERTICAL MACHINING CENTER
MAKINO SNC64 CNC GRAPHITE VERTICAL MACHINING CENTER PRICE: Loaded on Truck, Our Warehouse, York, PA …… $34,500.00 HMC Stock # 20216-P Machine Serial No.: 528 Machine Model No.: SNC64-A15 New Date: July 2000 Table S
NASA Producer 5-axis CNC bridge mill, Fagor 8055, 22" x 26" table
Here is a Nasa Producer 5-axis CNC bridge type machining center. This machine only machined gold at a jewelry manufacturer. The control is a Fagor 8055 with firmware for up to 7-axis simultaneous interpolation. It has RS
2015 FANUC ROBODRILL α-D21iLA5  DRILL & TAP CENTER, 27.5" x 15.7&q
TRAVELS X-AXIS: 27.55" Y-AXIS: 15.74" Z-AXIS: 12.99" TABLE TABLE SIZE: 33.46" X 16.4" LOAD CAPACITY: 660 LBS SPINDLE SPINDLE SPEED: 24,000 RPM SPINDLE TAPER: BT-30 SPINDLE NOSE TO
  • X axis: 27.5"
  • Y axis: 15.7"
    2015 FANUC ROBODRILL α-D21iLA5  DRILL & TAP CENTER, 27.5" x 15.7&q
    TRAVELS X-AXIS: 27.55" Y-AXIS: 15.74" Z-AXIS: 12.99" TABLE TABLE SIZE: 33.46" X 16.4" LOAD CAPACITY: 660 LBS SPINDLE SPINDLE SPEED: 24,000 RPM SPINDLE TAPER: BT-30 SPINDLE NOSE TO
    • X axis: 27.5"
    • Y axis: 15.7"
      AVEREX (AKARI) HS-450i HORIZONTAL MACHINING CENTER, FANUC CONTROL
      4,574 POWER ON HOURS 929 RUN HOURS 277 CUTTING HOURS MANUFACTURED IN 2015 | INSTALLED IN 2018 SPECIFICATIONS TRAVELS X-AXIS: 25.2” Y-AXIS: 24” Z-AXIS: 26.8” SPINDLE CENTER TO PALLET TOP: 2” – 26” SPINDL
      • X axis: 25.2"
      • Y axis: 24"
        KITAMURA MYCENTER-4XD#50 VMC, BOX WAYS & 4TH AXIS ROTARY TABLE, 43.3” X
        TRAVELS X-AXIS: 43.3” Y-AXIS: 24” Z-AXIS: 24” SPINDLE TAPER: #50 SPEED: 10,000 RPM MOTOR (30 MIN): 35 HP MOTOR (CONTINUOUS): 30 HP SPINDLE TORQUE (30 MIN): 488.3FT/LBS TABLE SIZE: 25.2” X 50” MAXIMUM WO
        • X axis: 43.3"
        • Y axis: 24"
          2016 OKUMA MB-5000H HORIZONTAL MACHINING CENTER, 19.7" Pallets
          11,964 POWER ON HOURS 3,325 OPERATING HOURS 2,204 CUTTING HOURS SPECIFICATIONS TRAVELS X-AXIS: 29.92” Y-AXIS: 29.92” Z-AXIS: 29.92” SPINDLE CENTER TO PALLET TOP: 1.97” – 31.89” SPINDLE NOSE TO PALLET CE
          • X axis: 29.92"
          • Y axis: 29.82"
            2013 HAAS VF-11/50 VERTICAL MACHINING CENTER, 120" X 40" X 30&quo
            TRAVELS X-AXIS: 120" Y-AXIS: 40" Z-AXIS: 30" SPINDLE NOSE TO TABLE: 5 – 35" TABLE LENGTH: 120" WIDTH: 28" MAX. WEIGHT ON TABLE: 4,000 LBS
            • X axis: 120"
            • Y axis: 40"
              2000 HAAS VF-0 VERTICAL MACHINING CENTER WITH HAAS CONTROL, 20” X 16” X 20”
              TRAVELS X AXIS: 20” Y AXIS: 16” Z AXIS: 20” SPINDLE NOSE TO TABLE: 4 –24” TABLE LENGTH: 26” WIDTH: 14” MAXIMUM WEIGHT ON TABLE: 3,000 LBS T-SLOTS T-SLOTS WIDTH: .625” CENTER DIS
              • X axis: 20"
              • Y axis: 16"
                2000 HARDINGE MODEL VMC1000II CNC VERTICAL MACHINING CENTER, 40" X 20&
                TRAVELS X-AXIS LONGITUDINAL: 40.16" Y-AXIS CROSS: 20.08" Z-AXIS VERTICAL: 20.08" SPINDLE NOSE TO TABLE SURFACE: 6.1" TO 26.1" TABLE FRONT EDGE TO DOOR: 7.23" SPINDLE CENTER TO COLUMN:
                • X axis: 40"
                • Y axis: 20"
                  2000 HAAS MODEL VF-4 VERTICAL MACHINING CENTER, 50" X 20" X 25&qu
                  TRAVELS X-AXIS: 50" Y-AXIS: 20" Z-AXIS: 25" SPINDLE NOSE TO TABLE: 4" – 29" TABLE LENGTH: 52" WIDTH: 18" MAXIMUM WEIGHT ON TABLE: 3,500 LBS T-SLOTS T-SLOTS WIDTH: .625&quo
                  • X axis: 50"
                  • Y axis: 20"
                    2001 HAAS MINI MILL VERTICAL MACHINING CENTER WITH HAAS CONTROL
                    ONLY 2,000 SPINDLE ON HOURS! SPECIFICATIONS TRAVELS X-AXIS: 16" Y-AXIS: 12" Z-AXIS: 10" TABLE LENGTH (TOTAL): 36" LENGTH (WORK SURFACE): 28.75" WIDTH: 12" MAXIMUM WEIGHT ON
                    • X axis: 16"
                    • Y axis: 12"
                      2013 MA-550VB VERTICAL MACHINING CENTER, 51.58” X 22” X 22”, LOW HOURS
                      TRAVELS X-AXIS TRAVEL: 51.58” Y-AXIS TRAVEL: 22.04” Z-AXIS TRAVEL: 22.04” TABLE TO SPINDLE NOSE: 7.87” – 35.03” COLUMN FRONT TO TABLE CENTER: 12.99” – 35.03” TABLE TABLE SIZE: 51.18” X 22.04” FLOOR TO TABL
                      • X axis: 51.58"
                      • Y axis: 22.04"
                        1996 MATSUURA RA-IIIF VMC with APC, Yasnac Control, 31” X 17” X 19”
                        MOVEMENT & RANGES X-AXIS TRAVEL: 31.49" Y-AXIS TRAVEL: 17.32” Z-AXIS TRAVEL: 19.09" FROM PALLET SURFACE TO SPINDLE END: 5.9" – 25" FROM PALLET CENTER TO COLUMN GUIDEWAY: 9.84" - 27.16&qu
                        • X axis: 31"
                        • Y axis: 17"
                          2014 DOOSAN DNM-400II VMC,  FANUC OiMD, 30" x 17" x 20" TRAV
                          TRAVELS X-AXIS TRAVEL: 30” Y-AXIS TRAVEL: 17.1” Z-AXIS TRAVEL: 20.1” SPINDLE CENTER TO TABLE TOP: 5.9” – 30.5” SPINDLE NOSE TO COLUMN: 20.2” FEED RATES RAPIDS (X/Y): 1,417 IPM RAPIDS (Z): 1,181 IPM CUTTI
                          • X axis: 30"
                          • Y axis: 17"
                            2010 HAAS VF-10/40 VERTICAL MACHINING CENTER, 120" x 32" x 30
                            TRAVELS X-AXIS: 120" Y-AXIS: 32" Z-AXIS: 30" SPINDLE NOSE TO TABLE: 5 – 35" TABLE LENGTH: 120" WIDTH: 28" MAX. WEIGHT ON TABLE: 4,000 LBS
                            • X axis: 120"
                            • Y axis: 34"
                              2015 FANUC ROBODRILL α-D21MiA5 CNC Drill/Tap Center, 4th Axis
                              TRAVELS X-AXIS: 19.7" Y-AXIS: 15.74" Z-AXIS: 20.87" TABLE TABLE SIZE: 25.6" X 15.7" LOAD CAPACITY: 660 LBS SPINDLE SPINDLE SPEED: 10,000 RPM SPINDLE TAPER: BT-30 MOTOR: 18.7 HP
                              • X axis: 19.7"
                              • Y axis: 15.74"
                                2016 MILLTRONICS VM2515 VMC WITH MILLTRONICS CONTROL, 25” X 15” X 20”
                                CAPACITIES TABLE: 30” X 16” X-AXIS TRAVEL: 25” Y-AXIS TRAVEL: 15” Z-AXIS TRAVEL: 20” TABLE LOAD: 1,500 LBS T-SLOT SIZE: .71” SPINDLE SPINDLE TAPER: BIG PLUS – IS NO. 40 SPINDLE NOSE TO TABLE TOP: 4 – 24” COL
                                • X axis: 25"
                                • Y axis: 15"
                                  2006 FADAL MODEL VMC6535HT VMC WITH FANUC CONTROL, 65” x 35” x 34”
                                  TABLE TABLE SIZE: 74.8” X 26.5” FLOOR TO TABLE SURFACE: 40.3” T-SLOTS (NO. X WIDTH X SPAN): 5 X .709" X 4.92" MAXIMUM WEIGHT ON TABLE: 4,250 LBS FEED RATES CUTTING FEED RATE (X/Y/Z): .01 – 400 IPM (600
                                  • X axis: 65"
                                  • Y axis: 35"
                                    Related Subcategories:
                                    Condition:
                                    Location:
                                    • X Pennsylvania (53)
                                    Price:
                                    •  to 
                                    1 | 2 | 3