buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Used > Pennsylvania

Used Machine Tools in Pennsylvania

956 used machine tools items for sale in Pennsylvania
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10
Refine: Viewing 801 - 900 of 956 matches
Sort by:
Items Per Page:  20 |  50 |  100
36" webster&bennett
$16,500
36" webster&bennett
36" table 19.25 under rail 5.7-125 rpm .005-.250 feed 30hp motor 220v 3ph 24"ram travel 13,500lbs 8'x8'x'8' foot print clean no issues runs good
  • Chuck: 36"
  • Swing: 42"
    SHARP MODEL VH2 HORIZONTAL/VERTICAL MILL, 9” x 54”
    $RFQ
    SHARP MODEL VH2 HORIZONTAL/VERTICAL MILL, 9” x 54”
    SPECIFICATIONS TABLE WORKING SURFACE: 9” X 54” LONGITUDINAL TRAVEL: 30” CROSS TRAVEL: 16.5” VERTICAL TRAVEL: 17” LONGITUDINAL FEEDS: 7/8 – 27” LONGITUDINAL RAPID TRAVERSE: 82.5” MOTORS VERTICAL SPINDLE: 3 H
    • Table width: 54"
    • Table length: 9"
      1963 - BROWN & SHARPE MICROMASTER 618 SURFACE GRINDER - 6" X 18"
      $RFQ
      1963 - BROWN & SHARPE MICROMASTER 618 SURFACE GRINDER - 6" X 18"
      SPECIFICATIONS CAPACITY WIDTH AND LENGTH OF WORK GROUND: 6″ X 18″ HEIGHT OF WORK GROUND WITH 8″ WHEEL: 15″ SPINDLE MOTOR: 1 HP SPEEDS: 3,450 RPM TABLE WORKING SURFACE: 6” X 18” NUMBER OF T-SLOTS: 1 WIDTH OF T-SLOTS: 9
      • Table width: 6"
      • Table length: 18"
        SHARP MODEL VH2 HORIZONTAL/VERTICAL MILL, 9” x 54”
        $RFQ
        SHARP MODEL VH2 HORIZONTAL/VERTICAL MILL, 9” x 54”
        SPECIFICATIONS TABLE WORKING SURFACE: 9” X 54” LONGITUDINAL TRAVEL: 30” CROSS TRAVEL: 16.5” VERTICAL TRAVEL: 17” LONGITUDINAL FEEDS: 7/8 – 27” LONGITUDINAL RAPID TRAVERSE: 82.5” MOTORS VERTICAL SPINDLE: 3 HP HORIZONTAL
        K O LEE B2060B MANUAL TOOL & CUTTER GRINDER - 5-1/4" X 37-
        $RFQ
        K O LEE B2060B MANUAL TOOL & CUTTER GRINDER - 5-1/4" X 37-
        SPECIFICATIONS DISTANCE BETWEEN TAILSTOCKS: 32″ DISTANCE BETWEEN CENTERS IN WORKHEAD AND TAILSTOCK: 26″ DISTANCE BETWEEN COLLET IN WORKHEAD AND TAILSTOCK: 27″ DISTANCE BETWEEN B946 CHUCK FACE AND TAILSTOCK (1″ HOLE THROU
        • Maximum workpiece diameter: 32"
          MULTIPRESS MODEL WR87M C-FRAME FLOOR TYPE HYDRAULIC PRESS, 8 TON
          $RFQ
          MULTIPRESS MODEL WR87M C-FRAME FLOOR TYPE HYDRAULIC PRESS, 8 TON
          SPECIFICATIONS TONNAGE: 8 TON STROKE: 12″ DAYLIGHT: 16” BED SIZE: 18″ X 11″ THROAT: 7-1/2” MOTOR: 7.5 HP RAM ADVANCE SPEED: 415 IPM RAM PRESS SPEED: 136 IPM RAM RETURN SPEED: 363 IPM PUMP: 7.5 GPM MAXIMUM PRESSURE: 1930
          • Tonnage: 8T
          • Stroke: 12"
            SCOTCHMAN CHANNEL SHEAR - 2" - 6"
            $RFQ
            SCOTCHMAN CHANNEL SHEAR - 2" - 6"
            THIS CHANNEL SHEAR IS DESIGNED TO USE WITH A SCOTCHMAN IRONWORKERS (65 TON, 90 TON OR 120 TON) SPECIFICATIONS ADJUSTABLE: 2″ TO 6″ STANDARD CHANNEL: 5” DIMENSIONS: 20″ LR X 10″ FB X 18″ H WEIGHT: 110 LBS
            1989 - HANKOOK MODEL PROTEC-28 HEAVY DUTY GEARED HEAD GAP BED ENGINE LATHE, 28” X 98”
            $RFQ
            1989 - HANKOOK MODEL PROTEC-28 HEAVY DUTY GEARED HEAD GAP BED ENGINE LATHE, 28” X 98”
            SPECIFICATIONS SWING OVER BED: 28” SWING OVER CARRIAGE: 18-7/8” SWING OVER GAP: 37-3/4” LENGTH OF GAP IN FRONT OF FACE PLATE: 10-5/8″ CENTER DISTANCE: 98″ HOLE THROUGH SPINDLE: 4-1/8” TAPER OF SPINDLE HOLE: METRIC TAPER
            • Swing: 28"
            • Centers: 90"
              STANDARD MODERN MODEL 2080 GEARED HEAD ENGINE LATHE, 20" X 80"
              $RFQ
              STANDARD MODERN MODEL 2080 GEARED HEAD ENGINE LATHE, 20" X 80"
              SPECIFICATIONS SWING OVER BED: 22” SWING OVER BED AND SADDLE WAYS: 20” SWING OVER CROSS SLIDE: 12” CENTER DISTANCE: 80" MAIN DRIVE MOTOR: 15 HP BAR CAPACITY 3" HEADSTOCK SPINDLE SPEEDS (18): 27 – 1600 RPM SPINDLE NOSE
              • Swing: 22"
              • Centers: 80"
                LEBLOND REGAL 19E7 ENGINE LATHE - 19" X 96"
                $RFQ
                LEBLOND REGAL 19E7 ENGINE LATHE - 19" X 96"
                SPECIFICATIONS CAPACITY SWING OVER BED & CARRIAGE WINGS: 19-1/4″ SWING OVER CROSS SLIDE: 12-1/4″ DISTANCE BETWEEN CENTERS: 96″ HEADSTOCK SPINDLE SPEEDS, NUMBER: 12 SPINDLE SPEED RANGE, LOW: 25 – 1,000 RPM SPINDLE SPEED
                • Swing: 19"
                • Centers: 96"
                  1997 - DAKE EUROMATIC 370PP FERROUS TYPE AUTOMATIC COLD SAW, 14-1/2″ BLADE
                  $RFQ
                  1997 - DAKE EUROMATIC 370PP FERROUS TYPE AUTOMATIC COLD SAW, 14-1/2″ BLADE
                  SPECIFICATIONS MAXIMUM BLADE SIZE: 14-1/2” MAXIMUM VISE OPENING: 8-3/4” MAXIMUM FEED VISE OPENING: 6-1/2” MOTOR: 3.5/4.5 HP BLADE SPEEDS: 25/50 RPM ROUND SOLID AT 90°: 4″ ROUND SOLID AT 45°: 3-5/8” ROUND TUBING AT 90°: 5
                  • Blade diameter: 14"
                    2001 - HARDINGE VMC800II VMC - 30" X 20" X 20"
                    $RFQ
                    2001 - HARDINGE VMC800II VMC - 30" X 20" X 20"
                    SPECIFICATIONS TRAVELS X-AXIS: 31.50” Y-AXIS: 20.08” Z-AXIS: 20.08” Y-AXIS THROAT DISTANCE: 23” TABLE WIDTH: 20.00” LENGTH: 36.40” LOAD CAPACITY: 1,540 LBS T-SLOTS (# & SIZE): .708” X 3 X 6.3” SPINDLE TAPER: 40 SPEED
                    • X axis: 30"
                    • Y axis: 20"
                      1993 - SUPERMAX MODEL MAX 8 GEARED HEAD VERTICAL MACHINING CENTER WITH FANUC OM CONTROL, 6
                      $RFQ
                      1993 - SUPERMAX MODEL MAX 8 GEARED HEAD VERTICAL MACHINING CENTER WITH FANUC OM CONTROL, 6
                      SPECIFICATIONS SPINDLE SPINDLE SPEED: 4000 RPM SPINDLE TAPER: CT-50 FRONT BEARING DIAMETER: 3.94″ TRAVEL X-TRAVEL: 65″ Y-TRAVEL: 27.5″ Z-TRAVEL: 27.5″ DISTANCE BETWEEN SPINDLE NOSE AND TABLE TOP: 7.87″ – 35.4″ DISTANCE
                      • X axis: 65"
                      • Y axis: 27"
                        1969 -AMERICAN PACEMAKER STYLE H HEAVY DUTY, STRAIGHT BED ENGINE LATHE, 39-3/4” X 48”
                        $RFQ
                        1969 -AMERICAN PACEMAKER STYLE H HEAVY DUTY, STRAIGHT BED ENGINE LATHE, 39-3/4” X 48”
                        SPECIFICATIONS SWING OVER BED (ACTUAL): 39-3/4″ SWING OVER CARRIAGE WINGS: 36-1/2” SWING OVER CROSS SLIDE: 26″ CENTERS: 48” SPINDLE SPEEDS: 7.5 – 750 RPM HEADSTOCK LENGTH ON BED: 49-1/2” RADIAL LOAD CAPACITY, FRONT BEAR
                        • Swing: 39.75"
                        • Centers: 48"
                          1979 - HARIG SUPER 618 2-AXIS SURFACE GRINDER - 6" X 18"
                          $RFQ
                          1979 - HARIG SUPER 618 2-AXIS SURFACE GRINDER - 6" X 18"
                          SPECIFICATIONS LONGITUDINAL TRAVEL: 18 ¾” CROSSFEED TRAVEL: 6 ¾” VERTICAL WORKING HEIGHT (UNDER 7″ WHEEL): 12″ PLATEN WORKING AREA: 6″ X 18″ GRINDING WHEEL FURNISHED: 7″ X ½” X 1 ¼” GRINDING WHEEL MAXIMUM CAPACITY: 8″ X
                          • Table width: 6"
                          • Table length: 18"
                            HARDINGE 7 VERT CUT-OFF SLIDE
                            $RFQ
                            HARDINGE 7 VERT CUT-OFF SLIDE
                            SPECIFICATIONS FOR HARDINGE HC CHUCKERS
                            ENSHU MODEL VA VERTICAL BED MILL, 43-1/4″ X 10-1/4″
                            $4,950
                            ENSHU MODEL VA VERTICAL BED MILL, 43-1/4″ X 10-1/4″
                            SPECIFICATIONS TABLE LONGITUDINAL TRAVEL: 23-5/8″ CROSS TRAVEL: 7-7/8″ VERTICAL TRAVEL: 15-3/4″ WORKING SURFACE: 43-1/4″ X 10-1/4″ TEE SLOTS NUMBER: 3 WIDTH: 5/8″ INTERVAL: 2-3/8″ LONGITUDINAL FEED SPEED RANGE: 1-1/2 –
                            • Table width: 10"
                            • Table length: 43"
                              USED ROCKWELL 15-665 MULTI SPDL DRILL - 15" 2 SPINDLE
                              $RFQ
                              USED ROCKWELL 15-665 MULTI SPDL DRILL - 15" 2 SPINDLE
                              SPECIFICATIONS DRILL TO CENTER OF CIRCLE: 15” STEP PULLEY: 5 STEPS COLUMN: 3” WIDE X 38” HIGH COOLANT TABLE: 24” X 28” EQUIPPED WITH JACOBS CHUCKS
                              • # Spindles: #2
                                1991 - HECKERT MODEL FW400E HEAVY DUTY PLAIN HORIZONTAL MILL WITH (2) VERTICAL HEADS, 16”
                                $RFQ
                                1991 - HECKERT MODEL FW400E HEAVY DUTY PLAIN HORIZONTAL MILL WITH (2) VERTICAL HEADS, 16”
                                SPECIFICATIONS TABLE WORKING SURFACE: 15-3/4” x 63” NUMBER OF T-SLOTS: 5 WIDTH OF T-SLOTS: 11/16″ MAXIMUM WEIGHT ON TABLE: 3,300 LBS TRAVELS LONGITUDINAL: 44″ CROSS: 14″ VERTICAL: 24-3/4″ SPINDLE TAPER: #50 SPEEDS (18
                                USED YOSHIDA YR5-115 RADIAL DRILL - 45" X 12"
                                $RFQ
                                USED YOSHIDA YR5-115 RADIAL DRILL - 45" X 12"
                                SPECIFICATIONS CAPACITIES MAXIMUM DISTANCE, COLUMN SURFACE TO SPINDLE END: 45-1/4” MINIMUM DISTANCE, COLUMN SURFACE TO SPINDLE END: 11-1/16” MAXIMUM DISTANCE, BASE TOP TO SPINDLE END: 50-13/16” MINIMUM DISTANCE, BASE TO
                                • Arm length: 37'
                                • Column diameter: 12"
                                  1982 -LAGUN MODEL FTV-1 VERTICAL MILL, 10″ X 44″
                                  $RFQ
                                  1982 -LAGUN MODEL FTV-1 VERTICAL MILL, 10″ X 44″
                                  SPECIFICATIONS TABLE SIZE: 44” X 10” TRAVERSE LONGITUDINAL TRAVEL MANUAL: 29.5” LONGITUDINAL TRAVEL WITH POWER FEED: 26” CROSS TRAVEL: 16” MAXIMUM VERTICAL CAPACITY: 18.5” VERTICAL KNEE TRAVEL: 16” RAM TRAVEL: 16” HEA
                                  • Table width: 10"
                                  • Table length: 44"
                                    1997 - HERCULES SPM-630 GAP BED ENGINE LATHE - 25" X 157"
                                    $RFQ
                                    1997 - HERCULES SPM-630 GAP BED ENGINE LATHE - 25" X 157"
                                    SPECIFICATIONS CAPACITIES SWING OVER BED: 25″ SWING OVER GAP: 35″ SWING OVER CROSS SLIDE: 16″ HEIGHT OF CENTERS: 12″ MAXIMUM WEIGHT BETWEEN CENTERS: 3306 LBS DISTANCE BETWEEN CENTERS: 157.480″ CROSS SLIDE STROKE: 13″ H
                                    • Swing: 25"
                                    • Centers: 157"
                                      1981 - DO-ALL MODEL C-1220A AUTOMATIC HORIZONTAL BANDSAW, 12″ X 20″
                                      $RFQ
                                      1981 - DO-ALL MODEL C-1220A AUTOMATIC HORIZONTAL BANDSAW, 12″ X 20″
                                      SPECIFICATIONS RECTANGLE CAPACITY: 12″ X 20″ ROUND CAPACITY: 16″ BLADE: 1.5″ X .050″ X 186″ DRIVE: 10 HP SPEED: 85-450 FPM INDEX: 0-24” PULL-UP FORCE: 3,300 LBS GENERAL FLOOR AREA: 139” X 85” NET WEIGHT, APPROX: 5,800 L
                                      • Width capacity: 20"
                                      • Height capacity: 12"
                                        2000 - CHIP BLASTER CV36-1000 COOLANT SYSTEM - 1000 PSI
                                        $RFQ
                                        2000 - CHIP BLASTER CV36-1000 COOLANT SYSTEM - 1000 PSI
                                        SPECIFICATIONS MAXIMUM PRESSURE: 1000 PSI DELIVERY VOLUME: 3 – 36 GPM COOLANT TANK VOLUME: 240 GALLON (DUAL FILTER) HIGH PRESSURE PUMP: 30 HP STANDARD FILTER ELEMENT: 5 MICRON HIGH PRESSURE OUTLETS: 2 APPROXIMATE SOUND L
                                        • Tank capacity: 240Gal
                                        • Motor: 30HP
                                          HYPREZ MICRO-FINISHER - 5-1/2" WHEEL
                                          $RFQ
                                          HYPREZ MICRO-FINISHER - 5-1/2" WHEEL
                                          SPECIFICATIONS OSCILLATING WHEELS (2): 5-1/2” TABLE: 13” X 5-1/2” GENERAL ELECTRICS: 110 VOLTS, 1 PH, 60 CYC EQUIPPED WITH MITERING GAUGE
                                          HYPREZ MICRO-FINISHER - 5-1/2" WHEEL
                                          $RFQ
                                          HYPREZ MICRO-FINISHER - 5-1/2" WHEEL
                                          SPECIFICATIONS OSCILLATING WHEELS (2): 5-1/2” TABLE: 13” X 5-1/2” GENERAL ELECTRICS: 110 VOLTS, 1 PH, 60 CYC EQUIPPED WITH MITERING GAUGE
                                          USED LOCKFORMER MODEL L-810 ROLLFORMER, 10 STAND X 1-3/8″ X 12″
                                          $RFQ
                                          USED LOCKFORMER MODEL L-810 ROLLFORMER, 10 STAND X 1-3/8″ X 12″
                                          SPECIFICATIONS STANDS: 10 ROLL SHAFT DIAMETER: 1-3/8″ KEYWAY SIZE: 1/4″ ROLL SPACE: 12″ CENTER, 3-1/2″ OUTSIDE HORIZONTAL CENTERS: 8″ VERTICAL CENTER: 5″ BASE TO LOWER SHAFT: 7-1/2″ LINE DIRECTION: RIGHT TO LEFT GENERAL
                                          • # Stands: #10
                                          • Roll diameter: 1.375"
                                            2001 - KAO MING KMR-1100S RADIAL DRILL - 4' X 11"
                                            $RFQ
                                            2001 - KAO MING KMR-1100S RADIAL DRILL - 4' X 11"
                                            SPECIFICATIONS DISTANCE FROM SPINDLE CENTER AND COLUMN CENTER: 19-7/8” – 49-1/4” DISTANCE BETWEEN SPINDLE CENTER AND COLUMN FACE: 14” – 43-5/16” DISTANCE OF SPINDLE TO BASE SURFACE: 13-9/16” – 49-13/16” COLUMN DIAMETER:
                                            • Arm length: 4'
                                            • Column diameter: 11"
                                              1997 - HURCO MODEL BMC-30/SSM 3-AXIS CNC MACHINING CENTER, 30″ X 18″ X 24″, WITH ULTIMAX S
                                              $RFQ
                                              1997 - HURCO MODEL BMC-30/SSM 3-AXIS CNC MACHINING CENTER, 30″ X 18″ X 24″, WITH ULTIMAX S
                                              SPECIFICATIONS TABLE WORKING SURFACE: 40.1″ X 15.7″ TABLE T-SLOTS: 3 X .71″ ON 4.92″ CENTERS TABLE LOAD W/UNIFORM DISTRIBUTION: 1,100 LBS SPINDLE MOTOR HORSEPOWER, (30 MINUTES): 10 HP HORSEPOWER, (CONTINUOUS): 7.5 HP T
                                              • X axis: 30"
                                              • Y axis: 18"
                                                USED GIDDINGS & LEWIS CHIPMASTER RADIAL DRILL - 4' X 9"
                                                $RFQ
                                                USED GIDDINGS & LEWIS CHIPMASTER RADIAL DRILL - 4' X 9"
                                                SPECIFICATIONS DISTANCE SPINDLE TO COLUMN FACE: 48″ COLUMN DIAMETER: 9″ SPINDLE SPEEDS (9): 60-1200 RPM SPINDLE TAPER: 4 MT FEEDS: .004, .008, .014, .020 GENERAL ELECTRICS: 208 VOLTS, 3 PH, 60 CYC DIMENSIONS: 92″ L-R, 3
                                                • Arm length: 4'
                                                • Column diameter: 9"
                                                  1987 - DO-ALL C-260A AUTOMATIC HORIZONTAL POWER BANDSAW - 10-1/4" X 12"
                                                  $RFQ
                                                  1987 - DO-ALL C-260A AUTOMATIC HORIZONTAL POWER BANDSAW - 10-1/4" X 12"
                                                  SPECIFICATIONS CUTTING CAPACITIES RECTANGULAR: 10-1/4″ X 12″ ROUND : 10-1/4″ BLADE: 1-1/4” X 138″ X .042” VARIABLE SPEED DRIVE MOTOR: 5 HP SHUTTLE VISE STROKE: 24” GENERAL FLOOR SPACE: 7’ X 6’ X 4’ NET WEIGHT: 4,200 LBS
                                                  • Width capacity: 12"
                                                  • Height capacity: 10.25"
                                                    HARDINGE 6-POSITION BED TURRET FOR DSM-59
                                                    $RFQ
                                                    HARDINGE 6-POSITION BED TURRET FOR DSM-59
                                                    SPECIFICATIONS 6 POSITION 5/8″ HOLE DIAMETER
                                                    1969 - HARDINGE HSL-59 SPEED LATHE - 9"
                                                    $RFQ
                                                    1969 - HARDINGE HSL-59 SPEED LATHE - 9"
                                                    SPECIFICATIONS TAPERED SPINDLE SPINDLE CAPACITIES WITH ROUND 5C COLLETS: 1-1/16″ WITH HEXAGON 5C COLLETS: 7/8″ WITH SQUARE 5C COLLETS: 3/4″ WITH STEP CHUCKS: 6″ WITH JAW CHUCKS: 5″ WITH EXPANDING COLLETS: 3″ SPINDLE SPE
                                                    • Swing: 9"
                                                    • Centers: 10"
                                                      ANGLE PLATE - 30" X 42" X 12"
                                                      $RFQ
                                                      ANGLE PLATE - 30" X 42" X 12"
                                                      SPECIFICATIONS OVERALL HEIGHT: 30” WIDTH (L-R): 42” DEPTH (F-B): 12” FRONT PLATE THICKNESS: 1.5” MATERIAL: STEEL FABRICATED EQUIPPED WITH DRILLED AND TAPPED HOLES
                                                      (2) HARDINGE TURRET TOP PLATES - 3/8"
                                                      $RFQ
                                                      (2) HARDINGE TURRET TOP PLATES - 3/8"
                                                      QUANTITY OF (2) TURRET TOP PLATES FOR HARDINGE CHNC CNC LATHES
                                                      (2) HARDINGE TURRET TOP PLATES - 3/8"
                                                      $RFQ
                                                      (2) HARDINGE TURRET TOP PLATES - 3/8"
                                                      QUANTITY OF (2) TURRET TOP PLATES FOR HARDINGE CHNC CNC LATHES
                                                      (2) HARDINGE TURRET TOP PLATES - 3/8"
                                                      $RFQ
                                                      (2) HARDINGE TURRET TOP PLATES - 3/8"
                                                      QUANTITY OF (2) TURRET TOP PLATES FOR HARDINGE CHNC CNC LATHES
                                                      1962 - HARDINGE DSM-59R TURRET LATHE - 1-1/16"
                                                      $RFQ
                                                      1962 - HARDINGE DSM-59R TURRET LATHE - 1-1/16"
                                                      SPECIFICATIONS SPINDLE SPINDLE CONSTRUCTION: HARDINGE PRELOADED, BALL BEARING SPINDLE TYPE: HARDINGE BS #21 10 SPINDLE SPEEDS: 450 TO 4000 RPM CAPACITY BED LENGTH (FROM SPINDLE FACE): 29″ SWING OVER BED: 9″ COOLANT SUM
                                                      VICTOR MODEL 380V VARIABLE SPEED VERTICAL MILL, 10″ X 50″
                                                      $RFQ
                                                      VICTOR MODEL 380V VARIABLE SPEED VERTICAL MILL, 10″ X 50″
                                                      SPECIFICATIONS WORKING SURFACE: 10″ X 50″ TRAVELS X-AXIS: 36″ Y-AXIS: 16″ Z-AXIS: 16″ QUILL: 5″ COLLET CAPACITY: 1/4 – 1” SPINDLE TAPER: R8 HORSEPOWER: 3 HP SPINDLE SPEED, VARIABLE SPEED: 60 – 4200 RPM POWER FEED PER SP
                                                      • Table width: 10"
                                                      • Table length: 50"
                                                        USED WMW BR40X1250 RADIAL DRILL - 4' X 12"
                                                        $RFQ
                                                        USED WMW BR40X1250 RADIAL DRILL - 4' X 12"
                                                        SPECIFICATIONS DIMENSIONS COLUMN DIAMETER: 12” DISTANCE FROM CENTER OF DRILL TO SPINDLE COLUMN: 11.8 – 49” DISTANCE FROM SPINDLE TO BASE PLATE: 14.75” – 54” SWING RADIUS OF DRILL SPINDLE: 17.7” – 55” SWING RANGE OF ARM:
                                                        • Arm length: 4'
                                                        • Column diameter: 12"
                                                          1967 - DO-ALL 2612-2H VERTICLE BANDSAW - 26"
                                                          $RFQ
                                                          1967 - DO-ALL 2612-2H VERTICLE BANDSAW - 26"
                                                          SPECIFICATIONS THROAT: 26″ WORK HEIGHT UNDER GUIDE: 12″ BLADE WIDTH CAPACITY: 1/8″ – 1″ BLADE LENGTH: 177″ WELDER CAPACITY: 1/8 – 1” VARIABLE BAND SPEED RANGE: 25 – 6000 SFM VARIABLE POWER FEED RANGE: 0 – 350 LBS MAIN TA
                                                          • Throat capacity: 26"
                                                          • Height capacity: 12"
                                                            KITAGAWA 12" 3-JAW CHUCK
                                                            $RFQ
                                                            KITAGAWA 12" 3-JAW CHUCK
                                                            SPECIFICATIONS DIAMETER: 12” THROUGH HOLE: 3-11/16″ SPINDLE MOUNT: A2-11
                                                            KITAGAWA 10" 3-JAW CHUCK
                                                            $RFQ
                                                            KITAGAWA 10" 3-JAW CHUCK
                                                            SPECIFICATIONS DIAMETER: 10” THROUGH HOLE: 2-7/8” SPINDLE MOUNT: A2-8
                                                            1990 - REPUBLIC LAGUN MODEL FU3-LA UNIVERSAL HORIZONTAL KNEE MILL, 13” x 63”
                                                            $RFQ
                                                            1990 - REPUBLIC LAGUN MODEL FU3-LA UNIVERSAL HORIZONTAL KNEE MILL, 13” x 63”
                                                            SPECIFICATIONS TABLE: 63″ X 13″ T-SLOTS IN TABLE: 3 X 3/4″ LONGITUDINAL FEED: 46″ CROSS FEED: 13 3/8″ VERTICAL FEED: 18 1/2″ NUMBER OF FEED CHANGES: 18 RANGE-LONGITUDINAL & CROSS: 1/2 TO 31 1/2″ RANGE VERTICAL: 1/8″ TO
                                                            USED DIAMOND GROUND DGP-3 BENCH MOUNTED TUNGSTEN GRINDER - 6"
                                                            $RFQ
                                                            USED DIAMOND GROUND DGP-3 BENCH MOUNTED TUNGSTEN GRINDER - 6"
                                                            SPECIFICATIONS BENCH MOUNTED TUNGSTEN GRINDER DESIGNED FOR ORBITAL USERS. BLADE CUT-OFF: 6″ AMPS: 5 ELECTRICS: 110 VOLTS EQUIPPED WITH PRECISION CUT-OFF ASSEMBLY MICROMETER INDEXER CUTTING WHEEL WITH A SECONDARY SAFETY
                                                            1966 - HARDINGE HC CHUCKER - 9"
                                                            $RFQ
                                                            1966 - HARDINGE HC CHUCKER - 9"
                                                            SPECIFICATIONS SPINDLE CONSTRUCTION: HARDINGE PRELOADED BALL BEARING SPINDLE CAPACITY WITH ROUND 5C HARDINGE COLLETS: 1-1/16″ WITH HEXAGON 5C HARDINGE COLLETS: 7/8″ WITH SQUARE 5C HARDINGE COLLETS: 3/4″ WITH STEP CHUCKS
                                                            • Swing: 9"
                                                            • Centers: 13"
                                                              1959 - HARDINGE HC CHUCKER - 9"
                                                              $RFQ
                                                              1959 - HARDINGE HC CHUCKER - 9"
                                                              SPECIFICATIONS SPINDLE CONSTRUCTION: HARDINGE PRELOADED BALL BEARING SPINDLE CAPACITY WITH ROUND 5C HARDINGE COLLETS: 1-1/16″ WITH HEXAGON 5C HARDINGE COLLETS: 7/8″ WITH SQUARE 5C HARDINGE COLLETS: 3/4″ WITH STEP CHUCKS
                                                              • Swing: 9"
                                                              • Centers: 13"
                                                                CHICK MCML-1550 MULTILOCK TOMBSTONE - 21-3/4" X 12"
                                                                $RFQ
                                                                CHICK MCML-1550 MULTILOCK TOMBSTONE - 21-3/4" X 12"
                                                                SPECIFICATIONS HIGH: 21-3/4″ SQUARE: 12″ EQUIPPED WITH BASE PLATES NOTE: USES MJQ-1550 STANDARD JAWS
                                                                (2) EMAG 4078390 LIVE TOOLHOLDERS - ER-32
                                                                $RFQ
                                                                (2) EMAG 4078390 LIVE TOOLHOLDERS - ER-32
                                                                SPECIFICATIONS RADIAL VDI-40 HOLDERS ER-32 COLLET SIZE TANG STYLE DRIVE FITS C-STYLE TURRET FITS HARDINGE EMAG VL3/VL5 CNC LATHE
                                                                (2) EMAG 4078390 LIVE TOOLHOLDERS - ER-32
                                                                $RFQ
                                                                (2) EMAG 4078390 LIVE TOOLHOLDERS - ER-32
                                                                SPECIFICATIONS RADIAL VDI-40 HOLDERS ER-32 COLLET SIZE TANG STYLE DRIVE FITS C-STYLE TURRET FITS HARDINGE EMAG VL3/VL5 CNC LATHE
                                                                (2) EMAG 4078390 LIVE TOOLHOLDERS - ER-32
                                                                $RFQ
                                                                (2) EMAG 4078390 LIVE TOOLHOLDERS - ER-32
                                                                SPECIFICATIONS RADIAL VDI-40 HOLDERS ER-32 COLLET SIZE TANG STYLE DRIVE FITS C-STYLE TURRET FITS HARDINGE EMAG VL3/VL5 CNC LATHE
                                                                (2) EMAG 4078390 LIVE TOOLHOLDERS - ER-32
                                                                $RFQ
                                                                (2) EMAG 4078390 LIVE TOOLHOLDERS - ER-32
                                                                SPECIFICATIONS RADIAL VDI-40 HOLDERS ER-32 COLLET SIZE TANG STYLE DRIVE FITS C-STYLE TURRET FITS HARDINGE EMAG VL3/VL5 CNC LATHE
                                                                (2) EMAG 4078390 LIVE TOOLHOLDERS - ER-32
                                                                $1,950
                                                                (2) EMAG 4078390 LIVE TOOLHOLDERS - ER-32
                                                                RADIAL VDI-40 HOLDERS ER-32 COLLET SIZE TANG STYLE DRIVE FITS C-STYLE TURRET FITS HARDINGE EMAG VL3/VL5 CNC LATHE
                                                                (2) EMAG 4078390 LIVE TOOLHOLDERS - ER-32
                                                                $RFQ
                                                                (2) EMAG 4078390 LIVE TOOLHOLDERS - ER-32
                                                                SPECIFICATIONS RADIAL VDI-40 HOLDERS ER-32 COLLET SIZE TANG STYLE DRIVE FITS C-STYLE TURRET FITS HARDINGE EMAG VL3/VL5 CNC LATHE
                                                                (2) EMAG 4078390 LIVE TOOLHOLDERS - ER-32
                                                                $RFQ
                                                                (2) EMAG 4078390 LIVE TOOLHOLDERS - ER-32
                                                                RADIAL VDI-40 HOLDERS ER-32 COLLET SIZE TANG STYLE DRIVE FITS C-STYLE TURRET FITS HARDINGE EMAG VL3/VL5 CNC LATHE
                                                                (2) EMAG 4078390 LIVE TOOLHOLDERS - ER-32
                                                                $RFQ
                                                                (2) EMAG 4078390 LIVE TOOLHOLDERS - ER-32
                                                                RADIAL VDI-40 HOLDERS ER-32 COLLET SIZE TANG STYLE DRIVE FITS C-STYLE TURRET FITS HARDINGE EMAG VL3/VL5 CNC LATHE
                                                                TONFOU TF3B-6A5 HYDRAULIC POWER CHUCK - 6" 3-JAW
                                                                $RFQ
                                                                TONFOU TF3B-6A5 HYDRAULIC POWER CHUCK - 6" 3-JAW
                                                                SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 1.77” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A5 APPROXIMATE WEIGHT: 30 LBS
                                                                TONFOU TF3B-6A5 HYDRAULIC POWER CHUCK - 6" 3-JAW
                                                                $RFQ
                                                                TONFOU TF3B-6A5 HYDRAULIC POWER CHUCK - 6" 3-JAW
                                                                SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 1.77” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A5 APPROXIMATE WEIGHT: 30 LBS
                                                                TONFOU TF3B-6A5 HYDRAUYLIC POWER CHUCK - 6" 3-JAW
                                                                $RFQ
                                                                TONFOU TF3B-6A5 HYDRAUYLIC POWER CHUCK - 6" 3-JAW
                                                                SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 1.77” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A5 APPROXIMATE WEIGHT: 30 LBS
                                                                TONFOU TF3B-6A5 HYDRAULIC POWER CHUCK - 6" 3-JAW
                                                                $RFQ
                                                                TONFOU TF3B-6A5 HYDRAULIC POWER CHUCK - 6" 3-JAW
                                                                SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 1.77” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A5 APPROXIMATE WEIGHT: 30 LBS
                                                                TONFOU TF3B-6A5 HYD POWER CHUCK - 6" 3-JAW
                                                                $RFQ
                                                                TONFOU TF3B-6A5 HYD POWER CHUCK - 6" 3-JAW
                                                                SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 1.77” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A5 APPROXIMATE WEIGHT: 30 LBS
                                                                TONFOU TF3B-6A5 HYDRAULIC POWER CHUCK - 6" 3-JAW
                                                                $RFQ
                                                                TONFOU TF3B-6A5 HYDRAULIC POWER CHUCK - 6" 3-JAW
                                                                SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 1.77” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A5 APPROXIMATE WEIGHT: 30 LBS
                                                                TONFOU TF3B-6A5 HYDRAULIC POWER CHUCK - 6" 3-JAW
                                                                $RFQ
                                                                TONFOU TF3B-6A5 HYDRAULIC POWER CHUCK - 6" 3-JAW
                                                                SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 1.77” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A5 APPROXIMATE WEIGHT: 30 LBS
                                                                TONFOU TF3B-6A5 HYDRAULIC POWER CHUCK - 6" 3-JAW
                                                                $RFQ
                                                                TONFOU TF3B-6A5 HYDRAULIC POWER CHUCK - 6" 3-JAW
                                                                SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 1.77” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A5 APPROXIMATE WEIGHT: 30 LBS
                                                                TONFOU TF3B-6A5 HYDRAULIC POWER CHUCK - 6" 3-JAW
                                                                $RFQ
                                                                TONFOU TF3B-6A5 HYDRAULIC POWER CHUCK - 6" 3-JAW
                                                                SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 1.77” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A5 APPROXIMATE WEIGHT: 30 LBS
                                                                TONFOU TF3B-6A5 HYDRAULIC POWER CHUCK - 6" 3-JAW
                                                                $RFQ
                                                                TONFOU TF3B-6A5 HYDRAULIC POWER CHUCK - 6" 3-JAW
                                                                SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 1.77” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A5 APPROXIMATE WEIGHT: 30 LBS
                                                                TONFOU TF3B-6A5 HYDRAULIC POWER CHUCK - 6" 3-JAW
                                                                $RFQ
                                                                TONFOU TF3B-6A5 HYDRAULIC POWER CHUCK - 6" 3-JAW
                                                                SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 1.77” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A5 APPROXIMATE WEIGHT: 30 LBS
                                                                TONFOU TF3B-6A5 HYDRAULIC POWER CHUCK - 6" 3-JAW
                                                                $RFQ
                                                                TONFOU TF3B-6A5 HYDRAULIC POWER CHUCK - 6" 3-JAW
                                                                SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 1.77” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A5 APPROXIMATE WEIGHT: 30 LBS
                                                                TONFOU TF3X-6A6 HYD POWER CHUCK - 6" 3-JAW
                                                                $RFQ
                                                                TONFOU TF3X-6A6 HYD POWER CHUCK - 6" 3-JAW
                                                                SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 2” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A6 APPROXIMATE WEIGHT: 30 LBS EQUIPPED WITH MOUNTING PLATE
                                                                1976 - SUNNEN MBB1800 HORIZONTAL HONE - .060" - 6.5"
                                                                $RFQ
                                                                1976 - SUNNEN MBB1800 HORIZONTAL HONE - .060" - 6.5"
                                                                SPECIFICATIONS I.D. RANGE: .060″ – 6.5″ LENGTH RANGE: BORES UP TO 16″ IN LENGTH, DEPENDING ON BORE DIAMETER STROKING RATES: 80, 110, 160, 220, 310 SPM SPINDLE SPEEDS: 200, 250, 320, 400, 500, 640, 800, 1000, 1270, 1600,
                                                                • Maximum diameter: 6.5"
                                                                • Stroke: 16"
                                                                  1990 - HARDINGE CHNCI GANG TOOL CNC LATHE - 1.625" 16C COLLET CAPACITY
                                                                  $RFQ
                                                                  1990 - HARDINGE CHNCI GANG TOOL CNC LATHE - 1.625" 16C COLLET CAPACITY
                                                                  SPECIFICATIONS SPINDLE SPINDLE CONFIGURATION: ANSI A2-5″ HOLE THROUGH SPINDLE: 1.875″ 16C COLLET CAPACITY: 1-5/8″ SPINDLE SPEED RANGE (1-RPM STEPS): 50 TO 5000 RPM AC SPINDLE DRIVE (30-MINUTE RATING): 10 HP CAPACITY MA
                                                                  • Swing: 14"
                                                                  • Centers: 12"
                                                                    DAKE 5025 H-FRAME HYD PRESS - 25 TON
                                                                    $RFQ
                                                                    DAKE 5025 H-FRAME HYD PRESS - 25 TON
                                                                    SPECIFICATIONS CAPACITY: 25 TONS HORSEPOWER: 2 HP RPM: 1,800 RPM RAM SPEED (ADVANCE): 80 IPM RAM SPEED (PRESS): 14 IPM WIDTH BETWEEN UPRIGHTS: 32-3/4″ WIDTH BETWEEN TABLE CHANNELS: 7 1/4″ MINIMUM RAM TO TABLE: 5″ MAXIMUM
                                                                    • Tonnage: 25T
                                                                      TECHNIKS RADAX HSK 63A HYD TOOLHOLDERS - (4) HSK63A
                                                                      $RFQ
                                                                      TECHNIKS RADAX HSK 63A HYD TOOLHOLDERS - (4) HSK63A
                                                                      LOT OF 4 TECHNIKS 93.05.037.012 HSK63A RADAX HYDRO 12mm X 90 mm TOOLHOLDERS NOTE: PRICE NEW $ 600.00 EACH THESE ARE NEW, NEVER USED. STILL IN ORIGINAL SEALED PLASTIC BAGS784
                                                                      AKEBONO MINC-26 GANG TOOL CNC LATHE - 1-1/16"
                                                                      $RFQ
                                                                      AKEBONO MINC-26 GANG TOOL CNC LATHE - 1-1/16"
                                                                      SPECIFICATIONS SIZE OF T-SLOTTED SLIDE: 16″ X 7-1/2″ TRAVEL (X) APPROX.: 9″ TRAVEL (Z) APPROX.: 9″ SPINDLE CAPACITY: 1-1/16″ MAXIMUM SPINDLE SPEED: 6,000 RPM ELECTRICS: 220V, 3 PH, 60 CYCLE EQUIPPED WITH FANUC OT CONTR
                                                                      • Swing: 9"
                                                                      • Centers: 9"
                                                                        HARIG 618 SURFACE GRINDER - 6" X 18"
                                                                        $RFQ
                                                                        HARIG 618 SURFACE GRINDER - 6" X 18"
                                                                        SPECIFICATIONS LONGITUDINAL TRAVEL: 18-3/4″ CROSSFEED TRAVEL: 6-3/4″ HYDRAULIC LONGITUDINAL TRAVEL: 0 – 70 FPM VERTICAL WORKING HEIGHT (UNDER 7″ WHEEL): 12″ PLATEN WORKING AREA: 6″ X 18″ GRINDING WHEEL, STANDARD: 7″ X 1/
                                                                        • Table width: 6"
                                                                        • Table length: 18"
                                                                          HARDINGE 6 POSITION BED TURRET - FOR DV-59
                                                                          $RFQ
                                                                          HARDINGE 6 POSITION BED TURRET - FOR DV-59
                                                                          SPECIFICATIONS 6 POSITION 5/8″ HOLE DIAMETER
                                                                          2000 - LOGANSPORT MDAT173DS-02 2-AXIS N/C ROTARY TILTING TABLE - 6.9"
                                                                          $RFQ
                                                                          2000 - LOGANSPORT MDAT173DS-02 2-AXIS N/C ROTARY TILTING TABLE - 6.9"
                                                                          SPECIFICATIONS TABLE DIAMETER: 6.9″ TABLE HEIGHT IN HORIZONTAL: 10.4″ OVERALL HEIGHT AT 90° TILTED: 13″ CENTER HEIGHT AT 90° TILTED: 8.3″ THRU HOLE DIAMETER: 0.7″ WIDTH OF GUIDE BLOCK: 0.7″ PERMISSIBLE LOAD: 66 LBS GEAR
                                                                          • Diameter or width: 6.9"
                                                                          • Length: 6.9"
                                                                            1990 - CLAUSING 1639 MULTI SPINDLE DRILL - 15" 3 SPINDLE
                                                                            $RFQ
                                                                            1990 - CLAUSING 1639 MULTI SPINDLE DRILL - 15" 3 SPINDLE
                                                                            SPECIFICATIONS THROAT DEPTH: 7-1/2″ DRILLING CAPACITY CAST IRON: 5/8″ MILD STEEL: 1/2″ SPINDLE TAPER: #2 MT SPINDLE TRAVEL: 4-3/4″ SPINDLE SPEEDS (5) W/STEP PULLEY DRIVE: 260 – 1800 RPM ELECTRICS: 440 VOLTS, 3PH, 60 CYC
                                                                            • # Spindles: #3
                                                                              IBP BROWN CUT-OFF SAW - 12"
                                                                              $RFQ
                                                                              IBP BROWN CUT-OFF SAW - 12"
                                                                              SPECIFICATIONS MOTOR: 2.5/3 HP SPINDLE: 30/60 RPM MAXIMUM BLADE DIAMETER: 12″ MAXIMUM VISE OPENING: 5-1/2″ EQUIPPED WITH MANUAL DOWNFEED AIR VISE SWIVEL HEAD ARRANGED FOR COOLANT, BUT MISSING PUMP & TANK
                                                                              • Blade diameter: 12"
                                                                                USED SOLBERGA SE1735 GH SINGLE SPINDLE DRILL - 24"
                                                                                $RFQ
                                                                                USED SOLBERGA SE1735 GH SINGLE SPINDLE DRILL - 24"
                                                                                SPECIFICATIONS DRILLS TO CENTER OF CIRCLE: 24″ DRILLING CAPACITY IN CAST IRON: 1-1/2″ DRILLING CAPACITY IN MILD STEEL: 1″ SPINDLE TRAVEL: 6″ SPINDLE TAPER: NO. 3 MT LOW SPINDLE SPEEDS: 60, 160, 260, 715 RPM HIGH SPINDLE
                                                                                • Swing: 24"
                                                                                • Motor: 2.2HP
                                                                                  UTE EF-104 RAM END FORMING SYSTEM - 1"
                                                                                  $RFQ
                                                                                  UTE EF-104 RAM END FORMING SYSTEM - 1"
                                                                                  APPLICABLE ENDFORM EXAMPLES SINGLE / DOUBLE FLARES CAPTURED / BUBBLE / STRAIGHT BEADS BELLED ENDS INCLUDING 3-STEP BELLS SADDLES REDUCTIONS EXPANSIONS SPECIFICATIONS CAPACITY (IN. X WALL IN.) STEEL: 1.00″ X .095″ STAINL
                                                                                  1988 - DENISON MULTIPRESS MODEL WUPA-1TR HYDRAULIC C-FRAME PRESS, 1 TON
                                                                                  $RFQ
                                                                                  1988 - DENISON MULTIPRESS MODEL WUPA-1TR HYDRAULIC C-FRAME PRESS, 1 TON
                                                                                  SPECIFICATIONS CAPACITY: 1 TON STROKE: 3″ DAYLIGHT: 8-1/4″ THROAT: 4-1/2″ ELECTRIC MOTOR: 3/4 HP RESERVOIR CAPACITY: 12 QUART BASE PLATE AREA: 9″ X 10″ GENERAL ELECTRICS: 110 VOLTS, 1 PH, 60 CYC EQUIPPED WITH PALM BUTT
                                                                                  • Tonnage: 1T
                                                                                  • Stroke: 3"
                                                                                    (2) MID-STATE TOMBSTONE FIXTURES - 5.75" X 25.25"
                                                                                    $RFQ
                                                                                    (2) MID-STATE TOMBSTONE FIXTURES - 5.75" X 25.25"
                                                                                    SPECIFICATIONS CLAMPING SURFACE (4-SIDES): 5.75″ X 25.25″ MOUNTED ON 19-11/16″ PALLET
                                                                                    TONFOU TF3X-6A6 HYD POWER CHUCK - 6" 3-JAW
                                                                                    $RFQ
                                                                                    TONFOU TF3X-6A6 HYD POWER CHUCK - 6" 3-JAW
                                                                                    SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 2” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A6 APPROXIMATE WEIGHT: 30 LBS EQUIPPED WITH MOUNTING PLATE
                                                                                    TONFOU TF3X-6A6 HYD POWER CHUCK - 6" 3-JAW
                                                                                    $RFQ
                                                                                    TONFOU TF3X-6A6 HYD POWER CHUCK - 6" 3-JAW
                                                                                    SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 2” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A6 APPROXIMATE WEIGHT: 30 LBS EQUIPPED WITH MOUNTING PLATE
                                                                                    TONFOU TF3X-6A6 HYD POWER CHUCK - 6" 3-JAW
                                                                                    $RFQ
                                                                                    TONFOU TF3X-6A6 HYD POWER CHUCK - 6" 3-JAW
                                                                                    SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 2” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A6 APPROXIMATE WEIGHT: 30 LBS EQUIPPED WITH MOUNTING PLATE
                                                                                    TONFOU TF3X-6A6 HYDRAULIC POWER CHUCK - 6" 3-JAW
                                                                                    $RFQ
                                                                                    TONFOU TF3X-6A6 HYDRAULIC POWER CHUCK - 6" 3-JAW
                                                                                    SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 2” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A6 APPROXIMATE WEIGHT: 30 LBS EQUIPPED WITH MOUNTING PLATE
                                                                                    TONFOU TF3X-6A6 HYDRAULIC POWER CHUCK - 6" 3-JAW
                                                                                    $1,500
                                                                                    TONFOU TF3X-6A6 HYDRAULIC POWER CHUCK - 6" 3-JAW
                                                                                    SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 2” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A6 APPROXIMATE WEIGHT: 30 LBS EQUIPPED WITH MOUNTING PLATE
                                                                                    TONFOU TF3X-6A6 HYDRAULIC POWER CHUCK - 6" 3-JAW
                                                                                    $RFQ
                                                                                    TONFOU TF3X-6A6 HYDRAULIC POWER CHUCK - 6" 3-JAW
                                                                                    SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 2” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A6 APPROXIMATE WEIGHT: 30 LBS EQUIPPED WITH MOUNTING PLATE
                                                                                    TONFOU TF3X-6A6 HYDRAULIC POWER CHUCK - 6" 3-JAW
                                                                                    $RFQ
                                                                                    TONFOU TF3X-6A6 HYDRAULIC POWER CHUCK - 6" 3-JAW
                                                                                    SPECIFICATIONS DIAMETER: 6″ THROUGH HOLE: 2” PLUNGER STROKE: .47” JAW STROKE: .21” MAXIMUM SPEED: 6,000 RPM MOUNT: A6 APPROXIMATE WEIGHT: 30 LBS
                                                                                    1969 - DO-ALL 2612-H VERT BANDSAW - 26"
                                                                                    $RFQ
                                                                                    1969 - DO-ALL 2612-H VERT BANDSAW - 26"
                                                                                    SPECIFICATIONS THROAT: 26″ WORK HEIGHT UNDER GUIDE: 12″ T-SLOTTED, TILTING TABLE: 24″ X 30-1/2″ BLADE SPEEDS: 25 – 6000 SFM (3 RANGES) BLADE WIDTH CAPACITY: 1/16″ – 1″ BLADE LENGTH: 177″ ELECTRICS: 220 VOLTS, 3 PH, 60 C
                                                                                    • Throat capacity: 26"
                                                                                    • Height capacity: 12"
                                                                                      LIPE-ROLLWAY 225 PNEUMATIC BARFEED - `1-5/8" X 2'
                                                                                      $RFQ
                                                                                      LIPE-ROLLWAY 225 PNEUMATIC BARFEED - `1-5/8" X 2'
                                                                                      SPECIFICATIONS MAX. BAR LENGTH: 2 FT. MAX. BAR DIAMETER: 1-5/8″ GENERAL WEIGHT, APPROX: 300 LBS
                                                                                      • Maximum bar diameter: 1.625"
                                                                                      • Maximum bar length: 2'
                                                                                        USED NIAGARA 4' HORIZONTAL SHEET METAL GROOVER - 4 FT
                                                                                        $RFQ
                                                                                        USED NIAGARA 4' HORIZONTAL SHEET METAL GROOVER - 4 FT
                                                                                        SPECIFICATIONS GROOVES: 1″ X 4′ 1/2″ X 4′ 3/8″ X 4′ 1/4″ X 4′ GENERAL DIMENSIONS: 5′ L-R X 1′ F-B X 3′ H WEIGHT, APPROX: 300 LBS EQUIPPED WITH STAND
                                                                                        1950 - HARDINGE DV-59 SECOND OPERATION LATHE - 1-1/16"
                                                                                        $RFQ
                                                                                        1950 - HARDINGE DV-59 SECOND OPERATION LATHE - 1-1/16"
                                                                                        SPECIFICATIONS SPINDLE SPINDLE CONSTRUCTION: HARDINGE PRELOADED, BALL BEARING SPINDLE CAPACITY W/ROUND 5C COLLETS: 1-1/16″ VARIABLE SPINDLE SPEEDS: 230 TO 3,500 RPM CAPACITY BED LENGTH (FROM SPINDLE FACE): 36″ SWING OVE
                                                                                        • Swing: 9"
                                                                                        • Centers: 17"
                                                                                          J & S RFG-55 F-SERIES WHEEL DRESSER - 8"
                                                                                          $RFQ
                                                                                          J & S RFG-55 F-SERIES WHEEL DRESSER - 8"
                                                                                          SPECIFICATIONS MAX. WHEEL DIAMETER: 8″ LENGTH ANGULAR TRAVEL: 1-3/8″ FIXED DIAMOND HEIGHT ABOVE TABLE: 5-1/2″ BASE DIMENSION: 3-3/16″ X 4″ EQUIPPED WITH 2 DIAMONDS G MICROMETER BASE CARRYING CASE
                                                                                          1993 - FEELER FTS-27 SECOND OPERATION LATHE - 9" X 36"
                                                                                          $RFQ
                                                                                          1993 - FEELER FTS-27 SECOND OPERATION LATHE - 9" X 36"
                                                                                          SPECIFICATIONS SPINDLE CAPACITY WITH ROUND 5C COLLETS: 1 1/16″ VARIABLE SPINDLE SPEEDS: 230 3500 RPM LENGTH OF BED: 36″ SWING OVER BED: 9″ TRAVEL OF DOUBLE TOOL CROSS SLIDE: 3 3/4″ TRAVEL OF TURRET SLIDE: 4″ DIAMETER O
                                                                                          • Swing: 9"
                                                                                          • Centers: 36"
                                                                                            1978 - ROUSSELLE 10 FLYWHEEL TYPE OBI PRESS - 110 TON
                                                                                            $RFQ
                                                                                            1978 - ROUSSELLE 10 FLYWHEEL TYPE OBI PRESS - 110 TON
                                                                                            SPECIFICATIONS CAPACITY: 110 TON BED AREA: 40″ L-R X 28″ F-B BED OPENING (RECTANGULAR): 22″ X 16″ BED OPENING (ROUND) DIA.: 19″ WIDTH OF OPENING THROUGH BACK: 20″ DEPTH OF THROAT FROM CENTER LINE OF SLIDE: 14-3/4″ WIDTH
                                                                                            • Tonnage: 110T
                                                                                            • Stroke: 3"
                                                                                              1953 - HARDINGE DV-59 SECOND OPERATION LATHE - 1-1/16"
                                                                                              $RFQ
                                                                                              1953 - HARDINGE DV-59 SECOND OPERATION LATHE - 1-1/16"
                                                                                              SPECIFICATIONS SPINDLE CAPACITY / 5C ROUND: 1-1/16″ BED LENGTH: 36″ SWING OVER BED: 9″ SPINDLE SPEEDS: 230 TO 3,500 RPM (8 STEPS) GENERAL DIMENSIONS: 67″ L-R X 32″ F-B X 57″ H WEIGHT, APPROX 1,550 LBS ELECTRICS: 220 VO
                                                                                              • Swing: 9"
                                                                                              • Centers: 36"
                                                                                                1953 - TAFT-PEIRCE 1 MANUAL SURFACE GRINDER - 5" X 12"
                                                                                                $RFQ
                                                                                                1953 - TAFT-PEIRCE 1 MANUAL SURFACE GRINDER - 5" X 12"
                                                                                                SPECIFICATIONS TABLE WORKING SURFACE: 5″ X 12″ TABLE OVERALL: 33-1/4″ X 8″ T-SLOT IN TABLE CENTER: 1/2″ TABLE HEIGHT ABOVE FLOOR: 38-1/4″ TABLE HEIGHT ABOVE FLOOR W/SUB-BASE: 42-1/4″ WORK HEIGHT UNDER WHEEL: 12″ WHEEL: 7
                                                                                                • Table width: 5"
                                                                                                • Table length: 12"
                                                                                                  EVERETT ABRASIVE CUT-OFF SAW - 10"
                                                                                                  $RFQ
                                                                                                  EVERETT ABRASIVE CUT-OFF SAW - 10"
                                                                                                  SPECIFICATIONS WHEEL CAPACITY: 10″ WHEEL ARBOR SHAFT: 5/8″ ARBOR DRIVE: DUAL RAW EDGE SURE GRIP “V” BELT WITH STEEL SHEAVES CAPACITY: 1-1/2″ SOLID 2″ PIPE MOTOR: 3 HP SPECIAL HI-TORQUE MOTOR TOTALLY ENCLOSED FAN-COOLED S
                                                                                                  • Blade diameter: 10"
                                                                                                    Categories:
                                                                                                    Condition:
                                                                                                    • X Used (956)
                                                                                                    Manufacturer:
                                                                                                    Location:
                                                                                                    • X Pennsylvania (956)
                                                                                                    Price:
                                                                                                    •  to 
                                                                                                    1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10