buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Ohio

Machine Tools in Ohio For Sale

1698 new & used machine tools items for sale in Ohio
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 1 - 50 of 1698 matches
Sort by:
Items Per Page:  20 |  50  |  100
New UCG U-Trak Length Control System
$RFQ
New UCG U-Trak Length Control System
This closed-loop system uses a controller to automatically synchronize the speed of the die set with that of the part, ensuring optimal cutting efficiency, accuracy, and overall performance for both new and existing mach
New UCG U-Cut Flying Cut Off w/U-Trak Length Control System
$RFQ
New UCG U-Cut Flying Cut Off w/U-Trak Length Control System
The cutting solution for tubes, pipes or roll-formed parts featuring all the benefits of our U-Trak Length Control System, combined with a quality-built new flying cut-off. • GREATER ACCURACY WITH REDUCED SCRAP • INC
NEW 11,000 Lb. x 12″ ERWTech/UCG Double Uncoiler
$RFQ
NEW 11,000 Lb. x 12″ ERWTech/UCG Double Uncoiler
UTUBE NUMBER: 3958 MANUFACTURERS: ERWTech, UCG SPECIFICATIONS: Capacity: 11,000 Lbs. Per Side (5,000 Kg) Maximum Strip Width: 12″ (320 mm) Strip ID: 18″ – 20″ (470 mm – 520 mm) Maximum Strip OD: 78″ (2000 mm)
New 300 KW ERWTech/UCG Solid State, High Frequency Welder
$RFQ
New 300 KW ERWTech/UCG Solid State, High Frequency Welder
UTUBE NUMBER: New Welder MANUFACTURER: ERWTech/UCG SPECIFICATIONS: 300 KW Solid State, High-Frequency Welder Input: Volts: 480 Amps: 630 Freq. HZ: 60 Phase: 3 EQUIPPED WITH: Heat Exchanger Motorized Adjustm
New ERWTech/UCG High Frequency Tube Mill Line
$RFQ
New ERWTech/UCG High Frequency Tube Mill Line
Quality-built machinery from ERWTech and services from UCG offers new tube mill lines that are dependable, affordable, and fully supported out of NW Ohio, USA. Services provided by UCG include start-up and commissioni
NEW ERWTech/UCG High Speed Flying Cold Saw
$RFQ
NEW ERWTech/UCG High Speed Flying Cold Saw
Quality-built machinery from ERWTech and services from UCG offers new tube mill lines that are dependable, affordable, and fully supported out of NW Ohio, USA. Services provided by UCG include start-up and commissioni
10 STAND X 8" TISHKEN ROLLFORMER 1.5" SHAFT
$RFQ
10 STAND X 8" TISHKEN ROLLFORMER 1.5" SHAFT
ORDER 10 MODEL 10-MLW1.5SN 103321.5" SPINDLE DIAMETER10 STAND8" ROLL SPACE8" HORIZONTA
KAO MING KMC-531EP Plano-Machining Center
$RFQ
KAO MING KMC-531EP Plano-Machining Center
Features: * Double column design provides stability while heavy duty cutting * Moveable Crossbeam (W-Axis) for increased rigidity for varied workpieces * Multi-Face machining capability with Automatic Universal Head *
  • Distance between houses: 147.6"
  • Table travel: 205.9"
    FERMAT WFT 15 "NEW", 150 mm CNC Horizontal Boring Milling & D
    $RFQ
    FERMAT WFT 15 "NEW", 150 mm CNC Horizontal Boring Milling & D
    Similar to WFT 13, but with a spindle diameter of 150 mm. Ideal for even larger and heavier workpieces up to 20 tons (optionally up to 40 tons) Spindle diameter 150 mm; spindle travel 800 mm. Optional ram stroke 700
    • Spindle diameter: 6"
    • X axis travel: 78.7"
      32 TON MINSTER OBI PRESS
      $RFQ
      32 TON MINSTER OBI PRESS
      order 32 3" STROKE2.25" RAM ADJUSTMENT 9.5" SHUT HEIGHT OVER BED12" X 8.75" R
      4000 LB X 20" AMERICAN STEEL LINE UNCOILER
      $RFQ
      4000 LB X 20" AMERICAN STEEL LINE UNCOILER
      ORDER 4000 26" MANDREL16" - 20" ID50" ODMOTORIZEDMANUAL EXPANSION KEEPERSLOOP
      2500 LB X 18" LITTELL UNCOILER
      $RFQ
      2500 LB X 18" LITTELL UNCOILER
      ORDER 2500 24" MANDREL 16" - 20" ID60" ODNON MOTORIZEDELECTRIC DRAG BRAKE3 KE
      8000 LB X 24" LITTELL UNCOILER
      $RFQ
      8000 LB X 24" LITTELL UNCOILER
      ORDER 8000 30" MANDREL 16" - 20" ID 48" OD60" ACTUAL ODMANUAL EXPANS
      100 TON JOHNSON SSDC PRESS 72" X 30"
      $RFQ
      100 TON JOHNSON SSDC PRESS 72" X 30"
      order 100 ? STROKE? RAM ADJUST POWERED? SHUT HEIGHTSPM63" X 24" RAM72" X 30" BED18" X
      4000 LB X 12" JAYBIRD COIL CRADLE
      $RFQ
      4000 LB X 12" JAYBIRD COIL CRADLE
      ORDER 4000 4000 LB MAX COIL WEIGHT12" WIDE60" ODLOOP SWITCH 92" X 50" X 60" T
      4000 LB X 12 JAYBIRD COIL CRADLE
      $RFQ
      4000 LB X 12 JAYBIRD COIL CRADLE
      ORDER 4000 12" MAX WIDTH 60" ODFORWARD REVERSEMANUAL COIL GUIDE ADJU
      4000 LB X 18" JAYBIRD COIL CRADLE
      $RFQ
      4000 LB X 18" JAYBIRD COIL CRADLE
      18" MAX WIDTH 60" ODFORWARD REVERSE MAUNAUL COIL GUIDESLOOP SWITCH 92" X 50" X 60" T APROX.3500 LBS APROX. 
      MINSTER 250 TON "HEVISTAMPER" 54X36 SSDC PRESS
      $RFQ
      MINSTER 250 TON "HEVISTAMPER" 54X36 SSDC PRESS
      MODEL: E2-250-54-36 YEAR: 1978 SPECIFICATIONS: Serial# E2-250-23166 Capacity: 250 Ton Bed Area: 54 LR x 36 FB Slide Area 54 LR x 36 FB Stroke: 6 Adjustment: 6 Shut Height: 21 above bed (slide down adjustment up) Ram
      40" x .060" ROWE #RA-1640 Shear & End Welder
      $RFQ
      40" x .060" ROWE #RA-1640 Shear & End Welder
      UTUBE NUMBER: 3982 MANUFACTURER: ROWE MODEL NUMBER: RA-1640RA-1640 SERIAL NUMBER: 29224 SPECIFICATIONS: Maximum Strip Width: 40" Maximum Strip Thickness: .060" EQUIPPED WITH: Upper Shear Blade Powe
      22 Stand x 2-1/2" x 24" CONTOUR Rollformer
      $RFQ
      22 Stand x 2-1/2" x 24" CONTOUR Rollformer
      UTUBE NUMBER: 4082 MANUFACTURER: CONTOUR SPECIFICATIONS: Number of Stands: 22 Spindle Diameter: 2-1/2" Roll Space: 24" Line Direction: Right to Left EQUIPPED WITH: Motor Controls W-Style Driveshaf
      • # Stands: #22
      • Roll diameter: 2.5"
        10 Stand x 2" Tishken Rollformer
        $RFQ
        10 Stand x 2" Tishken Rollformer
        UTUBE NUMBER: 4083 MANUFACTURER: TISHKEN SPECIFICATIONS: Number of Stands: 10 Spindle Diameter: 2" Roll Space: Base to Lower Spindle: 5" Horizontal Centers: 9" Vertical Centers: 5" - 7"
        • # Stands: #10
        • Roll diameter: 2"
          20 Stand x 2" x 12" TISHKEN Rollformer
          $RFQ
          20 Stand x 2" x 12" TISHKEN Rollformer
          UTUBE NUMBER: 4084 MANUFACTURER: TISHKEN SPECIFICATIONS: Number of Stands: 20 Spindle Diameter: 2" Roll Space: 12" Base to Lower Spindle: 5" Horizontal Centers: 9" Vertical Centers: 5"
          • # Stands: #20
          • Roll diameter: 2"
            6 Stand 1-1/2" x 6" TISHKEN Rollformer
            $RFQ
            6 Stand 1-1/2" x 6" TISHKEN Rollformer
            UTUBE NUMBER: 4085 MANUFACTURER: TISHKEN SPECIFICATIONS: Number of Stands: 6 Spindle Diameter: 1-1/2" Roll Space: 6" Base to Lower Spindle: 4" Horizontal Centers: 9" Vertical Centers: 4-1/2&
            • # Stands: #6
            • Roll diameter: 1.5"
              18 Stand x 2" x 12" PULLMAR Rollformer
              $RFQ
              18 Stand x 2" x 12" PULLMAR Rollformer
              UTUBE NUMBER: 4086 MANUFACTURER: PULLMAR SPECIFICATIONS: Number of Stands: 18 Spindle Diameter: 2" Roll Space: 12" (Approx.) Base to Lower Spindle: 7" Horizontal Centers: 15" Vertical Center
              • # Stands: #18
              • Roll diameter: 2"
                20 Stand x 2" x 8-1/2" TISHKEN Rollformer
                $RFQ
                20 Stand x 2" x 8-1/2" TISHKEN Rollformer
                UTUBE NUMBER: 4087 MANUFACTURER: TISHKEN SPECIFICATIONS: Number of Stands: 20 Spindle Diameter: 2" Roll Space: 8.5" (Approx.) Base to Lower Spindle: 5" Horizontal Centers: 12" Vertical Cent
                • # Stands: #20
                • Roll diameter: 2"
                  19 Stand x 2" x 13" YODER Rollformer
                  $RFQ
                  19 Stand x 2" x 13" YODER Rollformer
                  UTUBE NUMBER: 4088 MANUFACTURER: YODER SPECIFICATIONS: Number of Stands: 19 Spindle Diameter: 2" Roll Space: 13" Base to Lower Spindle: 7" Horizontal Centers: 15" Vertical Centers: 5" -
                  • # Stands: #19
                  • Roll diameter: 2"
                    10,000 Lb. x 24" KENT Double Uncoiler
                    $RFQ
                    10,000 Lb. x 24" KENT Double Uncoiler
                    UTUBE NUMBER: 4090 MANUFACTURER: KENT CORPORATION MODEL NUMBER: SKD 10000 SERIAL NUMBER: 95-2841 B YEAR: 1995 SPECIFICATIONS: Capacity: 10,000 Lbs. Per Side Maximum Coil Width: 24" Maximum Coil O.D.: 72&qu
                    • Maximum weight capacity: 10000Lb
                    • Maximum coil width: 24"
                      Thermal Arc Ultima 150 Plasma Welding Power Source, 150A, 460V, 60Hz, 2007
                      $RFQ
                      Thermal Arc Ultima 150 Plasma Welding Power Source, 150A, 460V, 60Hz, 2007
                      THERMAL ARC PLASMA WELDING POWER SOURCE Model Ultima-150, S/N C72465A190801H, New 2007 Stock # Q11548 EQUIPPED WITH: Torch, Foot Pedal, Coolant Recirculator. SPECIFICATIONS: Process.............................
                      • Power: 150AMP
                        ACER 1454E SWIVEL HEAD BED TYPE MILLING MACHINE
                        $RFQ
                        ACER 1454E SWIVEL HEAD BED TYPE MILLING MACHINE
                        THE PACKAGE INCLUDES: * ACER 1454E "SWIVEL HEAD" BED-MILL * "FAGOR" 8055i/FL-MC 3 OR 4-AXIS CNC CONTROL * AUTO LUBE SYSTEM * C5 BALL SCREWS AND DOUBLE-END THRUST BEARING SET ULTRA HIGH QUALIT
                        FEMCO BMC110R2 CNC Table Type Horizontal Boring, Milling & Drilling Mac
                        $RFQ
                        FEMCO BMC110R2 CNC Table Type Horizontal Boring, Milling & Drilling Mac
                        #50 Taper, 35 HP Geared Head Spindle, Full B Axis Rotary Table, Linear Scales on X, Y & Z, Fanuc CNC control, CTS, Chip Conveyor. Delivery, Installation and Training....... Spindle Size..................... 4.
                        • Spindle diameter: 4.3"
                        • X axis travel: 78.74"
                          Kent KGS-510AHD Surface Grinder
                          $RFQ
                          Kent KGS-510AHD Surface Grinder
                          FEATURES: 3 AXIS AUTOMATIC MOVEMENT "V" AND FLAT TURCITE TABLE WAYS HYDRAULIC TABLE PLC CONTROLLED CROSS FEED AUTO INCREMENTAL DOWN FEED COLUMN TRAVELLING CROSS FEED CONSOLE SETTING CROSS FEED TRAVEL
                          • Table width: 20"
                          • Table length: 40"
                            350 TON NIDEC MINSTER OBS GAP PRESS
                            $RFQ
                            350 TON NIDEC MINSTER OBS GAP PRESS
                            9.84" Stroke20-40 SPM63" LR x 35.4" FB T-Slotted Bolster4.72' slide adjustment47" x 27.5" Slide17.7" Max Die Height SDAU30-HP Main MotorMitsubishi ControlsSick Light Curtains & Vibration Pads PRS010149new 10/2014
                            Acer E-Mill 6vk Vertical Milling Machine
                            $RFQ
                            Acer E-Mill 6vk Vertical Milling Machine
                            ACER E-MILL Model 6-VK 12" x 60" TABLE 5 H.P. Spindle Drive #40 Taper Spindle - STANDARD FEATURES: * 5 HP SPINDLE INVERTER MOTOR WITH FREQUENCY INVERTER DRIVE * 0 - 4500 RPM INFINITE SPINDLE SPEED
                            • Table width: 12"
                            • Table length: 18"
                              KENT KGS-84 3-Axes Automatic Precision Surface Grinder
                              $RFQ
                              KENT KGS-84 3-Axes Automatic Precision Surface Grinder
                              KENT Model: KGS-84 AHD (NEW 2024 in STOCK NOW) 16" x 32" Variable Hold Electro-Magnetic Chuck Hydraulic Over the Wheel Dresser Magnetic Coolant Separation Dust Collection System Digital Readout System Sta
                              • Table width: 16"
                              • Table length: 32"
                                Acer High Precision Surface Grinder Model Supra-618-II
                                $RFQ
                                Acer High Precision Surface Grinder Model Supra-618-II
                                FEATURES: * ELEVATING HANDWHEEL AT BASE OF THE MACHINE * BALL ROLLING TABLE; BELT DRIVE * AUTO LUBRICATOR; HIGH TENSILE MEEHANITE CASTING * CAST IRON BASE: DOUBLE V "TURCITE-B" CROSSFEED WAY * INDEXIBLE
                                • Table width: 6"
                                • Table length: 18"
                                  Webster and Bennett No.33 Tension Spring
                                  $RFQ
                                  Webster and Bennett No.33 Tension Spring
                                  This is a Webster and Bennett No.33 Tension Spring, that can fit all DH and EH models.
                                  Webster and Bennett No.33 Tension Spring
                                  $RFQ
                                  Webster and Bennett No.33 Tension Spring
                                  This is a Webster and Bennett No.33 Tension Spring, that can fit all DH and EH models.
                                  Acme L47-2 Twin Head Centerless Finishing Machine w/ vibratory feed table
                                  $RFQ
                                  Acme L47-2 Twin Head Centerless Finishing Machine w/ vibratory feed table
                                  Acme Twin Head Centerless Finishing Machine 2) 1/2 H.P. variable speed adjustable belt heads Vibratory feed table Coolant system Cast Base - (2) Belt Finishing Head Assemblies: Rubber Covered Contact Wheel...
                                  • Maximum workpiece diameter: 2.66"
                                  • Grinding wheel diameter: 8"
                                    Kent 38mm Wheel Flange for 63, 84, 510
                                    $RFQ
                                    Kent 38mm Wheel Flange for 63, 84, 510
                                    Fits Kent 63AHD, 63WM1, 84AHD, 84WM1, 510AHD, 510WM1 This wheel flange supports grinding wheels that have a 5" through hole for the center hub to be mounted, and we support 1-1/2" thick wheels. Thinner wheel
                                    Nagel -TBT DM75-VT CSCO Vertical Adjustable Angle
                                    $RFQ
                                    Nagel -TBT DM75-VT CSCO Vertical Adjustable Angle
                                    Vertical Adjustment +/- 60 degrees 30" Stroke Programable Drill Angles, Positioning, Feed rates and Spindle speeds Probing Siemens 840 D CNC Control - Specifications: Number of Drill Units..............
                                    • # Spindles: #1
                                    • Maximum hole diameter: 0.75"
                                      8" Tall Chuck Jaws Set of Four (4), Webster & Bennett
                                      $RFQ
                                      8" Tall Chuck Jaws Set of Four (4), Webster & Bennett
                                      8" Tall Chuck Jaws Set of Four (4), Webster & Bennett, 3 STEP, WILL FIT 48", 60" & 72" VTL'S Specifications: Model........................... T39.74/1 Quantity.....................
                                      8" Tall Chuck Jaws Set of Four (4), Webster & Bennett
                                      $RFQ
                                      8" Tall Chuck Jaws Set of Four (4), Webster & Bennett
                                      8" Tall Chuck Jaws Set of Four (4), Webster & Bennett, 3 STEP, WILL FIT 48", 60" & 72" VTL'S Specifications: Model........................... T39.74/1 Quantity.....................
                                      Harig 618 Ballway Surface Grinding Machine
                                      $RFQ
                                      Harig 618 Ballway Surface Grinding Machine
                                      * Ballway roller table * 6"X18" walker electromagnetic chuck, * Cast Iron Base - Specifications: Capacity............................... 6" X 18" Longitudinal Travel - X-Axis...........
                                      • Table width: 6"
                                      • Table length: 18"
                                        3000 LB X 15" ROWE COIL CRADLE
                                        $RFQ
                                        3000 LB X 15" ROWE COIL CRADLE
                                        order 3000 3000 LB MAC COIL WEIGHT 15" MAX WIDTH48" ODMANUAL COIL GUIDE ADJUS
                                        4000 LB X 18" FEED LEASE COIL CRADLE
                                        $RFQ
                                        4000 LB X 18" FEED LEASE COIL CRADLE
                                        ORDER 4000 18" MAX WIDTH 48" ODFORWARD REVERSEMANUAL COIL GUIDE ADJU
                                        3000 LB X 20" ROWE COIL CRADLE
                                        $RFQ
                                        3000 LB X 20" ROWE COIL CRADLE
                                        order 3000 3000 LB MAC COIL WEIGHT 20" MAX WIDTH48" ODMANUAL COIL GUIDE ADJUS
                                        Hardinge GX 1600 Vert Mach Cntr, 67" x 27.6" tbl, XYZ=63/27.5/25&
                                        $RFQ
                                        Hardinge GX 1600 Vert Mach Cntr, 67" x 27.6" tbl, XYZ=63/27.5/25&
                                        HARDINGE BRIDGEPORT GX 1600 CNC VERTICAL MACHINING CENTER Model GX 1600, S/N GXEB2D0008, New 2012 Stock # Q11748 EQUIPPED WITH: Fanuc 0i-MD CNC Control, (2) Chillers, Chip Conveyor & Coolant System. SPECIFIC
                                        • X axis: 62.99"
                                        • Y axis: 27.55"
                                          Mitsubishi MD+PRO II CNC Wire EDM, Model BA8, 31" x23" x18.5&
                                          $RFQ
                                          Mitsubishi MD+PRO II CNC Wire EDM, Model BA8, 31" x23" x18.5&
                                          MITSUBISHI MD+PRO II CNC WIRE EDM Model BA8, S/N 57DB8095, New 2007 Stock # Q11773 EQUIPPED WITH: Mitsubishi V350 CNC Control (PC Based), Automatic Wire Threading, Submerged Machining, Linear Guide Ways. SPECIFI
                                          • X axis travel: 12.6"
                                          • Y axis travel: 9.8"
                                            12" X 12" X .187" AIR FEEDS FEEDER STRAIGHTENER
                                            $RFQ
                                            12" X 12" X .187" AIR FEEDS FEEDER STRAIGHTENER
                                            ORDER 12 AF3 MODEL 12" MAX WIDTH 12" STROKE.020" - .187 THICKNESS5 R
                                            100 TON NIAGARA OBI PRESS 6" STROKE 39" X 25" BED AIR CLUTCH
                                            $RFQ
                                            100 TON NIAGARA OBI PRESS 6" STROKE 39" X 25" BED AIR CLUTCH
                                            ORDER 100 6" STROKE4.5" POWERED RAM ADJUSTMENT15" SHUT HEIGHT27.5" X 20" RAM39" X 25"
                                            Categories:
                                            Condition:
                                            Manufacturer:
                                            Location:
                                            • X Ohio (1698)
                                            Price:
                                            •  to 
                                            1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>