buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Tooling, Parts, Accessories > Ohio

Tooling & Parts - Machine Tools in Ohio For Sale

152 new & used machine tool tooling items for sale in Ohio
1 | 2
Refine: Viewing 1 - 100 of 152 matches
Sort by:
Items Per Page:  20 |  50 |  100
10 TON CUSHION FOR 110 BLISS OBI
$RFQ
10 TON CUSHION FOR 110 BLISS OBI
OFF 110 BLISS13.25" X 18.25" TOP PLATE3" STROKE ESTIMATEMOUNTS IN PRESS BY 2 RODS23" X 22" X 23" T APROX.1500 LBS APROX. 
36" X 25" X 3" Bolster Plate
$RFQ
36" X 25" X 3" Bolster Plate
Width 36 inches Length 25 inches
41" X 24" X 4" Bolster Plate
$RFQ
41" X 24" X 4" Bolster Plate
order 41 41" LR24" FB4" ThickDrilled and Tapped 3" Centers4 3/8" Center Hole4 Mounting
HAUSE HOLOMATIC REAMER
$RFQ
HAUSE HOLOMATIC REAMER
CONSIST OF 3 HAUSE HOLOMATICS 1.5 HP SPINDLE MOTOR1/4 HP COOLANT PUMP MICRO LOGIC 1000 CONTROL1998
10" x 8.5" VIBRO DYNAMICS ISOLATION PADS
$RFQ
10" x 8.5" VIBRO DYNAMICS ISOLATION PADS
10" X 8.5" PADS1" BOLT SIZELOT OF 4MODEL 9L 180 
10" x 8.5" VIBRO DYNAMICS ISOLATION PADS
$RFQ
10" x 8.5" VIBRO DYNAMICS ISOLATION PADS
10" X 8.5" PADS1" BOLT SIZELOT OF 4MODEL 9L 180 
72” L-R x 24” F-B x 4” Thick T-Slotted Steel Bolster
$RFQ
72” L-R x 24” F-B x 4” Thick T-Slotted Steel Bolster
Bolster Area: 72 L-R x 24 F-B x 4 Thick T-Slotted Steel
16" x 13" x 6" VIBRO DYNAMICS VIBRATION MOUNTS
$RFQ
16" x 13" x 6" VIBRO DYNAMICS VIBRATION MOUNTS
16M3000 1.75" SHAFT DIAMETER16.25" X 13.5" X 6" TALL WITHOUT SCREW15" TALL WITH SCREW 3000 LB CUSHION CAPACITYSHIPPING DIMENSIONS4' X 4' X 20" TALL600 LBS APPROXIMATE WEIGHT
72" X 48" x 3" Bolster Plate
$RFQ
72" X 48" x 3" Bolster Plate
Width 48 inches Length 72 inches
64-1/2" x 30" x 4" T-SLOTTED BOLSTER PLATE
$RFQ
64-1/2" x 30" x 4" T-SLOTTED BOLSTER PLATE
order 99999 64-1/2" LEFT TO RIGHT 30" FRONT TO BACK T-SLOTS 6" ON CENTERS 1.5" T-SLOTS
RAPINDEX GULLWING PRESS TRANSFER SYSTEM
$RFQ
RAPINDEX GULLWING PRESS TRANSFER SYSTEM
order 18 MODEL:  GULLWINGSERIAL #:  GW1014-1GULLWING STYLE TRANSFER1
AMERICAN AEROSTAR DIE CLAMP SYSTEM
$RFQ
AMERICAN AEROSTAR DIE CLAMP SYSTEM
order 99999 6 MODEL 105 CLAMPS AIR /HYDRAULIC OPERATION 8000 LB CLAMPING FORCE AT 5000
CUSHION NITROGEN RING
$RFQ
CUSHION NITROGEN RING
order 3 34 CYLINDERS MOUNTED ON 3" THICK RINGSUPER BRUTE NITROGEN CYLINDERS4-3/4" OD x
14.1 Ton Capacity Cushion
$RFQ
14.1 Ton Capacity Cushion
order 99999 14.1 Ton Capacity 100 mm Stroke (3.94") 25.25" x 13.12" Top Cushion Pad 35
14.1 Ton Capacity Cushion
$RFQ
14.1 Ton Capacity Cushion
order 99999 14.1 Ton Capacity 100 mm Stroke (3.94") 25.25" x 13.12" Top Cushion Pad 35
14.1 Ton Capacity Cushion
$RFQ
14.1 Ton Capacity Cushion
order 99999 14.1 Ton Capacity 100 mm Stroke (3.94") 25.25" x 13.12" Top Cushion Pad 35
ORII PRESS TRANSFER SYSTEM
$RFQ
ORII PRESS TRANSFER SYSTEM
order 15 MODEL:  RY-120WPKXSERIAL #:  98 RT0005996" LR TRANSFERSINGL
84" x 48" x 6.5" Bolster Plate
$RFQ
84" x 48" x 6.5" Bolster Plate
order 84 84" LR48" FB6 ½" THICKDRILLED & TAPPEDGOOD CONDITION
72" x 26" x 2-3/4" Bolster Plate
$RFQ
72" x 26" x 2-3/4" Bolster Plate
order 99999 72" LR 26" FB 2 ¾" THICK T-SLOTS ON 6" CENTERS GOOD CONDITION
50" x 33" x 4" Bolster Plate
$RFQ
50" x 33" x 4" Bolster Plate
order 99999 50" LR 33" FB 4" THICK DRILLED AND TAPPED 4 MOUNTING HOLES 18 ½
28" x 40" x 3.5" Bolster Plate
$RFQ
28" x 40" x 3.5" Bolster Plate
order 28 40" LR28" FB3.5" ThickOff of #28 BlissGood Condition
96" x 60" x 9.5" Bolster Plate
$RFQ
96" x 60" x 9.5" Bolster Plate
order 99999 96" LR 54.5" FB 10" Thick T-Slots on 6" Centers Cushion Holes Good Condit
21" x 32" x 2" BOLSTER PLATE
$RFQ
21" x 32" x 2" BOLSTER PLATE
order 21 MODEL #:  N/ASERIAL #:  N/A32" WIDE21" FRONT TO BACK2" THIC
108" x 60" x 7.5" Bolster Plate
$RFQ
108" x 60" x 7.5" Bolster Plate
order 108 108" LR60" FB7 ½" THICK(2) 35" x 18" HOLES IN PLATET-SLOTTED ON 5
2000 LB KNIGHT ZERO LIFT LOAD TABLE
$RFQ
2000 LB KNIGHT ZERO LIFT LOAD TABLE
order 2000 MODEL #: OLT 4952SERIAL #: 898632000 MAXIMUM LIFT CAPACITY51" x 49" TILTING
60" x 36" x 1.5" STEEL RAM PLATE
$RFQ
60" x 36" x 1.5" STEEL RAM PLATE
order 99999 MODEL #: N/A SERIAL #: N/A 60" LR 36" FB 1.5" THICK GOOD CONDITION
65" x 24" x 3" BOLSTER PLATE
$RFQ
65" x 24" x 3" BOLSTER PLATE
order 65 65" LR24" FB3" THICKT- SLOTS ON 22.5" CENTERS LEFT TO RIGHTT-SLOTS ON 8.5" CE
66" x 30" x 3" BOLSTER PLATE
$RFQ
66" x 30" x 3" BOLSTER PLATE
order 66 66" LR30" FB3" THICK2 T-SLOTS LEFT TO RIGHT 22" CENTERS4 T-SLOTS FB 12" CENTE
36" x 24" x 2 3/4" BOLSTER PLATE
$RFQ
36" x 24" x 2 3/4" BOLSTER PLATE
order 36 MODEL #:  N/ASERIAL #:  N/A36" LR24" FB2 3/4" THICK4 MOUNTI
144" x 48" x 6.5" BOLSTER PLATE
$RFQ
144" x 48" x 6.5" BOLSTER PLATE
order 144 MODEL #:  N/ASERIAL #:  N/A144" LR48" FB 6.5" THICK T-SLOT
144" x 43" x 5-1/2" THICK T SLOTTED BOLSTER PLATE
$RFQ
144" x 43" x 5-1/2" THICK T SLOTTED BOLSTER PLATE
order 144 MODEL #:  N/ASERIAL #:  N/A144" LR43" FB5-1/2" THICK1" T S
2000 LB KNIGHT ZERO LIFT LOAD TABLE
$RFQ
2000 LB KNIGHT ZERO LIFT LOAD TABLE
order 99999 MODEL #: OLT 4952 SERIAL #: 89863 2000 LBS MAXIMUM LIFT CAPACITY 51" x 49"
2000 LB KNIGHT ZERO LIFT LOAD TABLE
$RFQ
2000 LB KNIGHT ZERO LIFT LOAD TABLE
order 99999 MODEL #: OLT 4952 SERIAL #: 89863 2000 MAXIMUM LIFT CAPACITY 51" x 49" TIL
8" Tall Chuck Jaws Set of Four (4), Webster & Bennett
$RFQ
8" Tall Chuck Jaws Set of Four (4), Webster & Bennett
8" Tall Chuck Jaws Set of Four (4), Webster & Bennett, 3 STEP, WILL FIT 48", 60" & 72" VTL'S Specifications: Model........................... T39.74/1 Quantity.....................
8" Tall Chuck Jaws Set of Four (4), Webster & Bennett
$RFQ
8" Tall Chuck Jaws Set of Four (4), Webster & Bennett
8" Tall Chuck Jaws Set of Four (4), Webster & Bennett, 3 STEP, WILL FIT 48", 60" & 72" VTL'S Specifications: Model........................... T39.74/1 Quantity.....................
48" X 28" X 3" BOLSTER PLATE
$RFQ
48" X 28" X 3" BOLSTER PLATE
48" LEFT TO RIGHT 28" FRONT TO BACK3.5" THICK 5 TSLOTS ON 5" CENTERS6" X 36" HOLE IN CENTER IRREGULAR
48" X 31" X 5" BOLSTER PLATE
$RFQ
48" X 31" X 5" BOLSTER PLATE
48" LR 31" FB5" THICKT SLOTTED12" X 36" HOLE IN CENTER
73" X 43" X 4" T SLOTTED BOLSTER PLATE
$RFQ
73" X 43" X 4" T SLOTTED BOLSTER PLATE
73" LR 43" FB 4" THICK T SLOTS ON 6" CENTERSLEFT BOLSTER PLATE IN PICTURE 
55" X 48" X 4" T SLOTTED BOLSTER PLATE
$RFQ
55" X 48" X 4" T SLOTTED BOLSTER PLATE
55" LR48" FB4" THICKT SLOTS ON 6" CENTERS
119 1/4" X 54" X 6" BOLSTER PLATE - T-SLOTTED
$RFQ
119 1/4" X 54" X 6" BOLSTER PLATE - T-SLOTTED
BOLSTER PLATE - T-SLOTTED 119 1/4" X 54" X 6"   119 1/4 " L-R 54" FB 6" THICK 9" CENTERS
Weldon Air Flow End Mill Sharpening Fixture
$RFQ
Weldon Air Flow End Mill Sharpening Fixture
Weldon Air Flow End Mill Sharpening Fixture Comes with all tooling shown in photos
Madison Hecktobore adjustable taper 50 tool holder, model 3011-318-27000
$RFQ
Madison Hecktobore adjustable taper 50 tool holder, model 3011-318-27000
Madison Hecktobore adjustable taper 50 tool holder, model 3011-318-27000
Flynn Manufacturing Co. adjustable taper 50 tool holder, Model 33
$RFQ
Flynn Manufacturing Co. adjustable taper 50 tool holder, Model 33
Flynn Manufacturing Co. adjustable taper 50 tool holder, Model 33
Lucas taper 50 taping tool holder, model 1T
$RFQ
Lucas taper 50 taping tool holder, model 1T
Lucas taper 50 taping tool holder, model 1T
Lucas taper 50 taping tool holder, model 1T
$RFQ
Lucas taper 50 taping tool holder, model 1T
Lucas taper 50 taping tool holder, model 1T
Devlieg Microbore taper 50 tool holder, model MB-8107
$RFQ
Devlieg Microbore taper 50 tool holder, model MB-8107
Length - 15(3/4)inch, Diameter - 3(3/4)inch, 8LBS
Devlieg Microbore Flashchange taper 50 tool holder, model 50FC-62
$RFQ
Devlieg Microbore Flashchange taper 50 tool holder, model 50FC-62
Length - 13(7/8)inch, Diameter - 3(3/4)inch, Weight - 7LBS
Universal Eng. taper 50 tool holder, model 469621
$RFQ
Universal Eng. taper 50 tool holder, model 469621
Length - 8(3/8)inch, Insert Diameter - 1(3/4)inch, Weight - 6LBS, 469621
Kearney & Trecker taper 50 tool holder, model 4509
$RFQ
Kearney & Trecker taper 50 tool holder, model 4509
Length - 11(1/4)inch, Diameter - 4(1/4)inch, Weight - 5 LBS, (5 1(1/4)B3(1/2)
Falcon Tool Co. taper 50 tool holder, model 7257 0272
$RFQ
Falcon Tool Co. taper 50 tool holder, model 7257 0272
Length - 10(1/2)inch, Diameter - 5(3/8)inch, Weight - 11LBS
Erickson taper 50 tool holder, model 50NMTB
$RFQ
Erickson taper 50 tool holder, model 50NMTB
Length - 9(1/4)inch, Diameter - 3(1/2)inch, Insert Diameter - (15/16)inch, Weight - 4LBS, 3-60-211-303, Quickchange
Scully Jones Morris taper 3-2, model 3-2MT
$RFQ
Scully Jones Morris taper 3-2, model 3-2MT
Length - 7(5/8)inch, Diameter - 1(7/16)inch, Insert Diameter - 1inch, 3LBS, 777769
Collis morris taper 3, model 3x3MT
$RFQ
Collis morris taper 3, model 3x3MT
Length - 8(1/2)inch, Diameter - 1(7/16)inch, insert diameter - (15/16)inch, Weight - 3LBS, 60433
5-2 morris taper tool adaptor
$RFQ
5-2 morris taper tool adaptor
5-2 morris taper tool adapter, drill included, Length - 10(1/4)inch, Diameter - 1(3/4), 4LBS
5-6H morris taper tool adapter
$RFQ
5-6H morris taper tool adapter
Length - 8(5/8)inch, Diameter - 2(19/36)inch, insert diameter - 1(11/16)inch, 6LBS
Kelly Reamer taper 50 tool holder, model B-3425
$RFQ
Kelly Reamer taper 50 tool holder, model B-3425
Length - 13(3/8)inch, Diameter 1(3/4), Insert hole - (3/8)inch, Weight - 6LBS
Devlieg Microbore taper 50 tool holder, model 40FC-H1034
$RFQ
Devlieg Microbore taper 50 tool holder, model 40FC-H1034
Length - 7(5/8)inch, Diameter - 3(3/4), Insert Diameter - 1(3/4)inch, Weight - 9LBS
Putnam taper 50 tool holder, model PLH501
$RFQ
Putnam taper 50 tool holder, model PLH501
Length - 10(1/4)inch, Diameter - 3(7/16)inch, Insert Diameter - 1(1/2)inch, Weight - 9LBS
Komet RB taper 50 tool holder, model ABS80 CAT50
$RFQ
Komet RB taper 50 tool holder, model ABS80 CAT50
Length - 8inch, Diameter - 3(7/8)inch, Insert Diameter - 1(3/4)inch, Weight - 10LBS
Devlieg Microbore taper 50 tool holder, model 50M-E62
$RFQ
Devlieg Microbore taper 50 tool holder, model 50M-E62
Length - 11(5/8)inch (Endmill included), Diameter - 3(3/4)inch, Insert Diameter - (5/8)inch, Weight - 5LBS
Kennametal taper 50 tool holder with Cyclone milling tool
$RFQ
Kennametal taper 50 tool holder with Cyclone milling tool
Total Length - 9(1/4)inch, Total Diameter - 7inch, Weight - 25LBS, This is a Kennametal Toolholder with a Cyclone Cutting head. Kennametal Holder - (158641CB5), Kennametal screw - (KLS20)(S4CE4), Cyclone cutter - (CNP30
Ingersoll taper 50 tool holder, model A-21128-2
$RFQ
Ingersoll taper 50 tool holder, model A-21128-2
Length - 11(1/2)inch, Diameter - 3(7/8)inch, Weight - 15LBS, (22J 350445 R 01), Blade No. - (625-141538-01) Wedge No. - (1M433R01) and (1M433R02)
Taper 50 tool holder, model 180269s117-1
$RFQ
Taper 50 tool holder, model 180269s117-1
Length - 10(1/2)inch, Diameter - 3(15/16)inch, Weight - 17LBS, 28 Teeth
Devlieg Microbore Flashchange taper 50 tool holder, model TH50FC-BS143-45
$RFQ
Devlieg Microbore Flashchange taper 50 tool holder, model TH50FC-BS143-45
Length - 15inch, Diameter - 3(3/4)inch, Weight - 15LBS,
Neal Skokie taper 50 tool holder, model no. 511/4
$RFQ
Neal Skokie taper 50 tool holder, model no. 511/4
Length - 14inch, Diameter - 3(15/16)inch, Weight - 14LBS, Insert Diameter - 1(1/4)inch, Endmill included
Ingersoll taper 50 tool holder, model B-80944-0
$RFQ
Ingersoll taper 50 tool holder, model B-80944-0
Height - 8inch, Diameter - 5inch, Weight - 15LBS, 8 Teeth, (LTC 11-80), (671C04R01), (50ST6)
Universal Eng. taper 50 tool holder with Greenleaf Corp. 5inch cutting tool
$RFQ
Universal Eng. taper 50 tool holder with Greenleaf Corp. 5inch cutting tool
Length - 8(1/2)inch, Diameter - 5(3/4)inch, Weight - 21LBS, Cutting Head - Greenleaf Corp. 5Inch cutting diameter, (ETRP), R.H. (5318R), Insert - TPCN-53N8
Taper 50 tool holder with 3(3/16)inch cutting diameter
$RFQ
Taper 50 tool holder with 3(3/16)inch cutting diameter
Length - 13(1/4)inch, Diameter - 4(1/16)inch, Cutting Diameter - 3(3/16)inch, Weight - 17LBS, Wedge - 81010, Toolhead - (ZN3M.0304.2190.R.H), Toolholder - Unknown
Putnam taper 50 tool holder, model PLH503
$RFQ
Putnam taper 50 tool holder, model PLH503
Length - 8(3/4)inch, Diameter - 3(3/4)inch, Insert Diameter - 2inch, Weight - 10LBS
VR/Wesson cutting tool, model FHR6-0307RS-9
$RFQ
VR/Wesson cutting tool, model FHR6-0307RS-9
Cutting Diameter - 7inch(Widest point), Height 2(3/8)inch, Weight - 15LBS, R.H. Whisper-cut, Rapid Set, (2B-58139), (STD-29431), 9/84
Taper 50 tool holder with 3(15/16)inch cutting diameter, model 188.360.117.
$RFQ
Taper 50 tool holder with 3(15/16)inch cutting diameter, model 188.360.117.
Tool Length - 10(5/8), Retention Knob - 9inch, Diameter - 4inch, Cutting Diameter - 3(15/16)inch, Weight - 20LBS,
Morris taper #5, model 5MT5
$RFQ
Morris taper #5, model 5MT5
Length - 8(1/4)inch, Diameter - 2(3/4)inch, Weight - 3LBS, (3-79), (5MT5), (LTC)
Taper 50 tool holder with 3(1/32)inch cutting diameter
$RFQ
Taper 50 tool holder with 3(1/32)inch cutting diameter
Length - 12(1/8)inch, Diameter - 3(3/4)inch, Cutting Diameter - 3(1/32)inch, Weight - 10LBS
Morris taper #5, with (3/8)inch insert width, model 188
$RFQ
Morris taper #5, with (3/8)inch insert width, model 188
Length - 13inch, Diameter - 1(3/4)inch, Insert width - (3/8)inch, Weight - 7LBS, (188), (4)
Morris taper #5, with (3/8)inch insert width, model 137
$RFQ
Morris taper #5, with (3/8)inch insert width, model 137
Length - 12inch, Diameter - 1(3/4)inch, Insert Size - (3/8)inch, Weight - 6LBS, (137), (4)
VALENITE 40 TAPER TOOL HOLDER WITH INDEXABLE BORING BAR
$RFQ
VALENITE 40 TAPER TOOL HOLDER WITH INDEXABLE BORING BAR
Valenite holder............... (V40CT-E75-175), (10/56513/95) Valenite indexable boring bar................ (50K1R10W3-SRC2), (1T6), (PT-543T), Diameter - .500in inserts included Shipped in box 5x5x5, Weighs 4LBS
Valenite 1 1/2" x 1 1/2" Indexable Tool Holders (Set of 4)
$RFQ
Valenite 1 1/2" x 1 1/2" Indexable Tool Holders (Set of 4)
Valenite 1 1/2" x 1 1/2" Indexable Tool Holders (Set of 4)
Dorian 1 1/2" x 1 1/2" Indexable Tool Holders (Set of 3)
$RFQ
Dorian 1 1/2" x 1 1/2" Indexable Tool Holders (Set of 3)
Dorian 1 1/2" x 1 1/2" Indexable Tool Holders (Set of 3)
Carboloy 1 1/2" x 1 1/2" Indexable Tool Holders (Set of 4)
$RFQ
Carboloy 1 1/2" x 1 1/2" Indexable Tool Holders (Set of 4)
Carboloy 1 1/2" x 1 1/2" Indexable Tool Holders (Set of 4)
WEBSTER & BENNETT INDUSTRIAL V-BELT, Long-life friction resistant,
$RFQ
WEBSTER & BENNETT INDUSTRIAL V-BELT, Long-life friction resistant,
Static resistant Oil resistant Long-life friction resistant cover
WEBSTER & BENNETT INDUSTRIAL V-BELT, Long-life friction resistant,
$RFQ
WEBSTER & BENNETT INDUSTRIAL V-BELT, Long-life friction resistant,
Static resistant Oil resistant Long-life friction resistant cover
Norton Grinding Wheel - 10" x 1" x 3" 5sg46-Jvs Norton T1, B
$RFQ
Norton Grinding Wheel - 10" x 1" x 3" 5sg46-Jvs Norton T1, B
Overall Diameter - 10" Width - 1" Hole - 3" Max operating speed - 2485 RPM • Ceramic Grain Grind. Wheels • 10in. diam x 3in. hole x 1in. thick • J hardness • 46 grit surface grinding wheel
Norton Grinding Wheel - 10" x 1" x 3" 5sg46-Jvs Norton T1, B
$RFQ
Norton Grinding Wheel - 10" x 1" x 3" 5sg46-Jvs Norton T1, B
Overall Diameter - 10" Width - 1" Hole - 3" Max operating speed - 2485 RPM • Ceramic Grain Grind. Wheels • 10in. diam x 3in. hole x 1in. thick • J hardness • 46 grit surface grinding wheel
Norton Grinding Wheel - 10" x 1" x 3" 5sg46-Jvs Norton T1, B
$RFQ
Norton Grinding Wheel - 10" x 1" x 3" 5sg46-Jvs Norton T1, B
Overall Diameter - 10" Width - 1" Hole - 3" Max operating speed - 2485 RPM • Ceramic Grain Grind. Wheels • 10in. diam x 3in. hole x 1in. thick • J hardness • 46 grit surface grinding wheel
Norton Grinding Wheel - 10" x 1" x 3" 5sg46-Jvs Norton T1, B
$RFQ
Norton Grinding Wheel - 10" x 1" x 3" 5sg46-Jvs Norton T1, B
Overall Diameter - 10" Width - 1" Hole - 3" Max operating speed - 2485 RPM • Ceramic Grain Grind. Wheels • 10in. diam x 3in. hole x 1in. thick • J hardness • 46 grit surface grinding wheel
Norton Grinding Wheel - 10" x 1" x 3" 5sg46-Jvs Norton T1, B
$RFQ
Norton Grinding Wheel - 10" x 1" x 3" 5sg46-Jvs Norton T1, B
Overall Diameter - 10" Width - 1" Hole - 3" Max operating speed - 2485 RPM • Ceramic Grain Grind. Wheels • 10in. diam x 3in. hole x 1in. thick • J hardness • 46 grit surface grinding wheel
Norton Grinding Wheel - 10" x 1" x 3" 5sg46-Jvs Norton T1, B
$RFQ
Norton Grinding Wheel - 10" x 1" x 3" 5sg46-Jvs Norton T1, B
Overall Diameter - 10" Width - 1" Hole - 3" Max operating speed - 2485 RPM • Ceramic Grain Grind. Wheels • 10in. diam x 3in. hole x 1in. thick • J hardness • 46 grit surface grinding wheel
Norton Grinding Wheel - 10" x 1" x 3" 5sg46-Jvs Norton T1, B
$RFQ
Norton Grinding Wheel - 10" x 1" x 3" 5sg46-Jvs Norton T1, B
Overall Diameter - 10" Width - 1" Hole - 3" Max operating speed - 2485 RPM • Ceramic Grain Grind. Wheels • 10in. diam x 3in. hole x 1in. thick • J hardness • 46 grit surface grinding wheel
Webster & Bennett WB 757 Turret Indexing Pinion
$RFQ
Webster & Bennett WB 757 Turret Indexing Pinion
NOS, Part # WB 757 Fits 48", 60, 72, 96, MACHINES With 5-Position Turrets
Webster & Bennett WB 757 Turret Indexing Pinion
$RFQ
Webster & Bennett WB 757 Turret Indexing Pinion
NOS, Part # WB 757 Fits 48", 60, 72, 96, MACHINES With 5-Position Turrets
Webster & Bennett WB 757 Turret Indexing Pinion
$RFQ
Webster & Bennett WB 757 Turret Indexing Pinion
NOS, Part # WB 757 Fits 48", 60, 72, 96, MACHINES With 5-Position Turrets
90 degree angle vise
$RFQ
90 degree angle vise
Expands..............0 - 6 1/8 inch Height.......... 7 1/16 inch Length......... 17 1/2 inch Width.........7 1/2 inch 4 bolt holes to secure to machine table Weighs...........82LBS as is
90 degree angle, 3 T-slot angle plate
$RFQ
90 degree angle, 3 T-slot angle plate
90 degree angle, 3 T-slot angle plate 4 securing holes Length............ 15 15/16inch Height.............8inch Width............. 6inch Face Dimensions...........15 15/16inch x 8inch Weighs 58LBS as is
WEBSTER & BENNETT 72 EM Cross Rail & Turret Slide Re-grind, Re-scra
$RFQ
WEBSTER & BENNETT 72 EM Cross Rail & Turret Slide Re-grind, Re-scra
*Re-machine the turret saddle *Re-grind the turret slide *Re-scrape and refit all surfaces Rescrape and refit all gibs. *Re-flake all surfaces. *Re-fit with Phonelic material.
3" WEBSTER & BENNETT #3 MORRIS TAPER ADAPTOR SOCKET
$RFQ
3" WEBSTER & BENNETT #3 MORRIS TAPER ADAPTOR SOCKET
#3 Morris Taper Adaptor Fits All Webster & Bennett VTL's 48", 60", 72", 96", 120", 144"
3" WEBSTER & BENNETT #3 MORRIS TAPER ADAPTOR SOCKET
$RFQ
3" WEBSTER & BENNETT #3 MORRIS TAPER ADAPTOR SOCKET
#3 Morris Taper Adaptor
Webster & Bennett Way Wiper Material
$RFQ
Webster & Bennett Way Wiper Material
Sold in 22" strips that must be cut to desired size. Material must be custom fit by being drilled or slotted for your custom application.
WEBSTER & BENNETT INDUSTRIAL V-BELT, 124"
$RFQ
WEBSTER & BENNETT INDUSTRIAL V-BELT, 124"
Static resistant Oil resistant Long-life friction resistant cover Industrial V-Belts are a common ware item and can present a Safety Issue if they are not replaced as part of a basic Preventative Maintenance Progr
WEBSTER & BENNETT INDUSTRIAL V-BELT, Long-life friction resistant,
$RFQ
WEBSTER & BENNETT INDUSTRIAL V-BELT, Long-life friction resistant,
Static resistant Oil resistant Long-life friction resistant cover Industrial V-Belts are a common ware item and can present a Safety Issue if they are not replaced as part of a basic Preventative Maintenance Progr
WEBSTER & BENNETT INDUSTRIAL V-BELT, 111" OUTSIDE CIRCUMFERENCE
$RFQ
WEBSTER & BENNETT INDUSTRIAL V-BELT, 111" OUTSIDE CIRCUMFERENCE
111" WEBSTER & BENNETT INDUSTRIAL V-BELT Static resistant Oil resistant Long-life friction resistant cover Industrial V-Belts are a common ware item and can present a Safety Issue if they are not repla
Related Subcategories:
Categories:
Condition:
Manufacturer:
Location:
  • X Ohio (152)
Price:
  •  to 
1 | 2