buy & sell, new & used machinery, machine tools & equipment

Woodworking Equipment

Woodworking Equipment For Sale

681 new & used woodworking equipment items for sale
<Prev | 9 | 10 | 11 | 12 | 13 | 14
Refine: Viewing 451 - 500 of 681 matches
Sort by:
Items Per Page:  20 |  50  |  100
Sliding Table 26"X30" W/54" EX
$549
Sliding Table 26"X30" W/54" EX
Sliding Table 26"X30" W/54" Fence Excaliber Model: 50-SLT40P (Excaliber) For 10" Table Saw
Striebig compact Panel Saw
$RFQ
Striebig compact Panel Saw
Compact Panel Saw The Compact Vertical Panel Saw delivers legendary Striebig accuracy at a compact price. . Cuts up to 5' x 10' panels . Free standing, one-piece fully welded frame . Heavy-duty support ro
Used Rockwell 6" Jointer, Model 37-200
$1,100
Used Rockwell 6" Jointer, Model 37-200
Used Rockwell 6" Jointer, Model 37-200. SN 300454, 3/4 HP, 115 VOLT. Factory original Retractable Casters.
Used Delta 18" Radial Arm Saw, Model 33-062
$5,975
Used Delta 18" Radial Arm Saw, Model 33-062
Used Delta 18" Radial Arm Saw, Model 33-062. 7.5 HP, 230/460 Volt (wired 230V) 3PH. Factory Origninal Electronic Brake. SN 91L72414
Everett Cut Off Saw
$RFQ
Everett Cut Off Saw
No description providedElectrics208-230/460 Volt / 3 Phase Motor3 HP With Stand<br />Non - Miter
DeWalt Radial arm saw, older Cast Iron
$1,250
DeWalt Radial arm saw, older Cast Iron
Used working 3 phase, can be rewound to singe phase, add a phase converter, or freq drive to run on single phase electricity.
2005 JONSEN PRO-STEEL MODEL SG1300-WJS WET TYPE WIDE BELT SANDER, 50”
$RFQ
2005 JONSEN PRO-STEEL MODEL SG1300-WJS WET TYPE WIDE BELT SANDER, 50”
SPECIFICATIONS MAXIMUM WORKING WIDTH: 50” MAXIMUM WORKING THICKNESS: 6.2” BELT MEASUREMENT: 86” X 51” MINIMUM WORKING LENGTH: 11-3/4” MAIN MOTOR: 30 HP FEEDING SPEED: 6.5 – 30 FPM GENERAL MACHINE DIMENSION
2016 LAGUNA SMARTSHOP III CNC ROUTER WITH FANUC OiMF CONTROL, 5’ X 10”
$RFQ
2016 LAGUNA SMARTSHOP III CNC ROUTER WITH FANUC OiMF CONTROL, 5’ X 10”
SPECIFICATIONS TABLE SIZE: 5” X 10” TOOL CHANGER: 8 POSITIONS Z-AXIS TRAVEL: 12” SPINDLE MOTOR: 12 HP SPINDLE SPEED: 24,000 RPM SPINDLE TAPER: HSK-63F CUTTING SPEEDS: 1,600 IPM RAPID TRAVELS: 2,500 IPM GENE
2001 Thermwood C40 CNC Router
$19,900
2001 Thermwood C40 CNC Router
Specifications: Control ................................................................ 91000 Super Series Table Size ............................................................................... 8’ x 4’ X-Axis T
Onsrud 3025 pin router
$5,000
Onsrud 3025 pin router
5hp 3ph w/ vac attachment, new showroom model
Delta 10" Hybrid cabinet saw
$1,395
Delta 10" Hybrid cabinet saw
2hp 1ph 220v, w/30" capacity custom roller guide fence
Delta Unisaw 36-812
$1,200
Delta Unisaw 36-812
3hp 1ph 220v w/ 52" unifence
Used Oliver Model 299T 24" Planer With ITCH Spiral Head
$11,500
Used Oliver Model 299T 24" Planer With ITCH Spiral Head
Used Oliver Model 299T 24" Planer With ITCH Spiral Head. 7.5 HP, 208-220/440 volt 24" wide capacity, 8" Max thickness Variable feed speed, 25 to 100 fpm Power driven adjustable height bed rollers Kn
2,000 Tons x 60" Large Used Clearing Triple Action Hydraulic Press, Deep Draw Hydraul
$679,000
2,000 Tons x 60" Large Used Clearing Triple Action Hydraulic Press, Deep Draw Hydraul
Large Hydraulic Triple Action Press from a large Aerospace company.Clearing Press Company is one of the largest Hydraulic Press Manufacturers in the world.  For Decades they have been building the most heavy duty s
Hendricks Patriot Panel Saw
$7,000
Hendricks Patriot Panel Saw
Large, great working, panel saw.
SCMI Edgebander willing to negotiate price!! $5,000.00
$5,000
SCMI Edgebander willing to negotiate price!! $5,000.00
SCMI Edgebander made in italy in good condition!
JWS22CS-102 Spanner Wrench
$20
JWS22CS-102 Spanner Wrench
Spanner Wrench for (708320) Jet Shaper
JWS22CS-108
$9
JWS22CS-108
Lock out Bracket for (708320) Jet Shaper
JWS18HO-101
$103
JWS18HO-101
Dust chute for Jet Shaper 708320
14" Width 13" Stroke Perfecto 500-14 PRESS FEED, Roll Feed
$3,450
14" Width 13" Stroke Perfecto 500-14 PRESS FEED, Roll Feed
14" PERFECTO DOUBLE RACK & PINION ROLL FEED MODEL #500-14 NEW 1971 S/N FS-3976
Knuth SSB 32Xn Column Drill Press DRILL PRESS
$RFQ
Knuth SSB 32Xn Column Drill Press DRILL PRESS
NEW KNUTH MODEL: SSB 32Xn COLUMN DRILL PRESS   * 5 YEAR WARRANTY *   SPECIFICATIONS WORKING ARE: DRILLING CAPACITY................... 1.26" TAPPING CAPACITY, STEEL............. M 20 TABLE SET UP AR
Cutter Shaper Finger Pull
$10
Cutter Shaper Finger Pull
Cutter Shaper Finger Pull; Finger Pull for 3/4" Stock; 2-1/4" Diameter, 3/4" bore
Cuttr Shpr Edge Profile
$10
Cuttr Shpr Edge Profile
Cutter Shaper Edge Profile; 3-1/4" Diameter; 1-1/4" Bore
Best 960 Radial Arm Saw
$4,392
Best 960 Radial Arm Saw
The Best 960 radial arm saw offers adaptability, versatility, precision and durability to shops of all sizes. THREE PHASE MOTOR POWER 4 (3) Hp (Kw) SINGLE PHASE MOTOR POWER 3 (2.2) Hp (Kw) MOTOR SPEED 3360 DIAME
Junior 640 Radial Arm Saw
$3,832
Junior 640 Radial Arm Saw
The Junior 640 radial arm saw offers adaptability, versatility, precision and durability to shops of all sizes. Heavy castings and the eight bearing saw carriage makes this machine very accurate and rigid. THREE PHAS
50 Ton Used Airam Cut Off Press With Large Bed, Mdl. 3562, Note: New Replacement Cost $ 61
$12,500
50 Ton Used Airam Cut Off Press With Large Bed, Mdl. 3562, Note: New Replacement Cost $ 61
Tonnage 50 Bed Size (L- R, F- B) 70" x 51" Distance Between Guide Pins (L- R, F- B) 61" x 32 1/2" Stroke 3" Guide Pins Diameter 2 1/2" Dimensions (L x D x H) 70" x 70" x 84" WEIGHT 10,000 Lbs.
75 Ton x 5" Used Minster OBS Punch Press, Mdl. 70-4-1/2, Bolster Plate with Ball Tran
$29,500
75 Ton x 5" Used Minster OBS Punch Press, Mdl. 70-4-1/2, Bolster Plate with Ball Tran
Tonnage 75 Tons Stroke 5" Opening Between Uprights 18-1/2" Shank Szie 2" Ram Area 18" x 24" Throat 11" Dimensions (W x D x H) Control Box 37" x 13" x 61" Dimensions (W x D x H) (Machine) 70" x 78
25 Ton x 3" Used Rousselle Gap Frame OBI Punch Press (Single Crank), Mdl. #3G, Air Tr
$5,950
25 Ton x 3" Used Rousselle Gap Frame OBI Punch Press (Single Crank), Mdl. #3G, Air Tr
Tonnage 25 Stroke 3" Shut Height 9 3/4" Bed Size ( L-R, F-B ) 20" x 14" Ram Size ( L-R, F-B ) 8 1/4" x 5 1/2" Throat 18" Strokes Per MInute 135 WEIGHT 4400 Lbs. Electric Foot Pedal Air Tri
20 Ton x 2" Used Benchmaster High Speed Press, Mdl. 20-4-2424-2-14-PP 20/300-787F, Re
$5,500
20 Ton x 2" Used Benchmaster High Speed Press, Mdl. 20-4-2424-2-14-PP 20/300-787F, Re
Stroke 2" Bed Area 24" x 24" Shut Height 14" Strokes Per MInute 20 - 300 Reeves Variable Speed Drive Hydraulic Overlaod Protection Palm Button Controls W/Emergency Stop Auto Lube System Pedestal
20 Ton x 1-1/4" Used Minster High Speed Punch Press, Mdl. P2-20-24, Air Clutch & Brak
$17,500
20 Ton x 1-1/4" Used Minster High Speed Punch Press, Mdl. P2-20-24, Air Clutch & Brak
NOTE:  This press is set up in Jog Mode right now.  Depending on which feeder you use it will need to be customized to your setup.  Press Runs well.  Rear Feeder is currently connected.  The Vam
35 Ton x 15" Used Denison Hydraulic MultiPress (C Frame Style), Mdl. SPLA35C, Safety
$9,950
35 Ton x 15" Used Denison Hydraulic MultiPress (C Frame Style), Mdl. SPLA35C, Safety
Tonnage 35 Stroke 15" Bed Size (L-R, F- B) 20" x 30" Bore 4-3/4" Ram 3-1/4" PSI Rating 3950 Horsepower 30 H.P. Voltage WEIGHT 15,000 Lbs. Voltage 440v 3-Phase Note: This Machine Was O
30 Ton x 18" Used Logan Hydraulic Press, Mdl. 6000 D-10, Tonnage Indicator, Foot Trea
$6,500
30 Ton x 18" Used Logan Hydraulic Press, Mdl. 6000 D-10, Tonnage Indicator, Foot Trea
Tonnage 30 Stroke 18" Daylight 19" Throat Depth 8 1/2" Bed Area (L-R, F-B) 24 1/2" x 14" Ram Area 6" Ram Cylinder Diameter 4" Type C-Frame Horsepower 15 H.P. Dimensions (LxDxH) 34" x 60" x
60 Ton x 6" Used Savage 4 Post Hydraulic Blanking Trim Press, Mdl. 60HTP, STI Minisaf
$32,500
60 Ton x 6" Used Savage 4 Post Hydraulic Blanking Trim Press, Mdl. 60HTP, STI Minisaf
For Questions on Specifications please contact http:www.Savagepress.com Note:  This machine has 3 Pieces.  Press, Electrical Cabinet and the Hydraulic Pump.SAVAGE 4 post presses are built with very long b
50 Ton x 18" Used Hannifin Hydraulic Press, Mdl. 500-41, Tonnage Gauge, #6649
$11,500
50 Ton x 18" Used Hannifin Hydraulic Press, Mdl. 500-41, Tonnage Gauge, #6649
Tonnage 50 Stroke 18" Daylight 18" Bed Size (L-R, F-B) 40 1/2" x 24" Ram Size (L-R, F-B) 23" x 22" Ram Cylinder Diameter 5 1/2" Type C-Frame Horsepower 15 H.P. Dimensions (LxWxH) 70" x 50" x 1
25 Ton x 3/4" Used Bliss High Speed Punch Press, Mdl. , Shut Height Indicator, Bliss
$21,500
25 Ton x 3/4" Used Bliss High Speed Punch Press, Mdl. , Shut Height Indicator, Bliss
Capacity 25 Ton x 3/4" Bed Area (F-B, L-R) 24" x 18" Stroke 3/4" Crankshaft Diameter 2-1/2" Strokes Per Minute ( Variable ) 220 - 660 SPM Shut Height 10-1/2" Horsepower 5 H.P. WEIGHT 7,000 Lbs.
250 Ton Used Best Press Hydraulic Powder Compacting Press (Up And Down Acting), Mdl. JC-14
$65,000
250 Ton Used Best Press Hydraulic Powder Compacting Press (Up And Down Acting), Mdl. JC-14
This press was pressing Zerconium Oxide into the round white pucks you see in the photos.It was recently reconditioned including-- New hydraulic fittings- New Hydraulic Seals- Hydraulic container cleaned and conditioned
32 Ton x 4" Used Minster OBI Press As IS Machine, Mdl. #4, Foot Pedal, #20000-36-60-H
$12,000
32 Ton x 4" Used Minster OBI Press As IS Machine, Mdl. #4, Foot Pedal, #20000-36-60-H
Tonnage 32 Stroke 4" Shut Height 11 1/2" Bed Size (L-R, F-B) 24" x 15" Ram Size (L-R, F-B) 15" x 10 1/2" Throat 8 1/4" Opening Thru Back 11 1/2" Strokes Per MInute 100 Horsepower 3 H.P. Clu
500 Ton Used Bliss Straight Side Stamping Press (BIG HEAVY DUTY PUNCH PRESS), Mdl. HP2-500
$RFQ
500 Ton Used Bliss Straight Side Stamping Press (BIG HEAVY DUTY PUNCH PRESS), Mdl. HP2-500
Tonnage 500 Ton Bed Area (L-R, F-B) 84" x 48" Stroke Length 6" Slide Adjustment 6" Shut Height 18" Bolster Plate 8" Thick, T-Slotted Stroke Per Minute (Variable) 30 - 60 SPM Bed Opening 66" x 28"
100 Ton x 5" Used Schuler Beuhler (Excellent Shape) C-Frame Straight Side Stamping Pr
$54,500
100 Ton x 5" Used Schuler Beuhler (Excellent Shape) C-Frame Straight Side Stamping Pr
Capacity 100 Ton x 5" Stroke 5" Stroke Adjustment 3.9" Maximum Open Height 14.5" Table Size 37" x 25" Shank Hole 1.9" Distance of the Slide, Maximum Tool Dimension (BxD) 21" x 17" Distance Betwee
80 Ton x 10" Used Federal OBI Press, Mdl. #7, Wintress Dipro 1500 Die Monitor, Air Cl
$24,500
80 Ton x 10" Used Federal OBI Press, Mdl. #7, Wintress Dipro 1500 Die Monitor, Air Cl
Tonnage 80 Stroke 10" Bed Size (L-R, F-B) 36" x 28" Shut Height 13 1/2" Throat 15" Strokes Per MInute 75 Clutch Type Air Clutch Ram Size (L-R, F-B) 28" x 18" Horsepower 7 1/2 Dimensions (Lx
150 Tons x 10" Used Chicago Straight Side Double Crank Punch Press, Mdl. , Air Clutch
$14,500
150 Tons x 10" Used Chicago Straight Side Double Crank Punch Press, Mdl. , Air Clutch
          Tonnage 150 Ton Bed Area 84" x 48" Shut Hieght 20" Stroke Length 10" Ram Size (L-R, F-B) 74" x 42" Distance From Floor To Bed 44" Dimensions
Used Hammond DusKolector Model DK-1255
$2,500
Used Hammond DusKolector Model DK-1255
Used Hammond DusKolector Model DK-1255. Ser# 13774. 10HP 230/460 volt 3 phase (wired 230) 25.6/12.8 amps. Cyclone style dust collector with single drum and Oneida 4 cartridge after filter with 2 drum storage. Approx
42" Widebelt Orbital Sander
$10,000
42" Widebelt Orbital Sander
This Sander is in rebuilt condition! We are liquidating our business and no longer have use for it! Works great for cabinet doors!
Used Crouch/ Ritter Edge Sander Non-Oscillating
$3,495
Used Crouch/ Ritter Edge Sander Non-Oscillating
Used Crouch/ Ritter Edge Sander Non-Oscillating. 7” x 148" Abrasive Belt Size Graphite Covered Platen 7.5 H.P. Abrasive Belt Drive Motor, T.E.F.C. 3,700 FPM Abrasive Belt Speed Swing Away Dust Hood With 6"
NEW CLAUSING # 2274 20" VARIABLE SPEED FLOOR DRILL PRESS
$4,770
NEW CLAUSING # 2274 20" VARIABLE SPEED FLOOR DRILL PRESS
NEW CLAUSING # 2274 20" VARIABLE SPEED FLOOR DRILL PRESS Make: CLAUSING Model #: 2274 Condition: NEW All specifications are approximations, and are subject to verification. Standard Features 3-Phase 300
Timesaver Wet Wide Belt Sander Model: Lynx 37 MWT DBB-60
$44,995
Timesaver Wet Wide Belt Sander Model: Lynx 37 MWT DBB-60
Year: 2012 Make: Timesaver Model: Lynx 37 MWT DBB-60 Condition: Excellent Electrical: 460/3Phase Machine Status: Under Power Shipping Info: Rigging Fee Extra Weight: 12,000 lbs Dimension: L x W x H 10'x6
Blade, 350mm Gang Rip
$199
Blade, 350mm Gang Rip
Blade, 350mm Gang Rip; Model: 189303 [Leuco]; Gang Rip saw Blade; 350mm, 3.5 kerf, 2.5 plate, 70mm bore
Brand New 37" Grizzly Double Belt Sander
$11,500
Brand New 37" Grizzly Double Belt Sander
Brand new grizzly 37" double belt sander, digital raise and lower bed. Purchased brand new for $12,200.00 and only used a few times. Comes with extra sanding belts. Pick-up only in Bloomer, WI
Used Whitney S-205, 24" H Planer
$18,000
Used Whitney S-205, 24" H Planer
Used Whitney S-205 Planer. - 24" width capacity - medium duty single surfacer for cabinet and specialty furniture industry; - heavy cast construction and all gear drive; - wedge bed vertical adjustment; - 5
Used Berran Industrial Automatic Sleeve Wrapper Model DP-10040D
$7,900
Used Berran Industrial Automatic Sleeve Wrapper Model DP-10040D
Used Berran Industrial Automatic Sleeve Wrapper Model DP-10040D. •Mitsubishi PLC control panel •Sealing time adjustable •Power belted discharge conveyor •Film unwind motorized •Product lengt
Categories:
Condition:
Manufacturer:
Location:
Price:
  •  to 
<Prev | 9 | 10 | 11 | 12 | 13 | 14