buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Wire Machinery > Used > Connecticut

Used Wire Machinery in Connecticut

104 used wire machine items for sale in Connecticut
1 | 2 | 3 | 4 | 5 | 6
Refine: Viewing 1 - 20 of 104 matches
Sort by:
Items Per Page:  20  |  50 |  100
6 DIE EBERHARDT WET TYPE STEP CONE WIRE DRAWING MACHINE (13896)
6 DIE EBERHARDT WET TYPRE WIRE DRAWING MACHINE (13896) MACHINE 13896 Manufacturer: Eberhardt Anlagenbau, Germany Building date: 2017 Previous use: silver and Silver brazing wire D
1 1/4", LEWIS, No. 15 VFHA, STRAIGHTEN & CUT (13583)
Used 1 1/4" Lewis Model 15 VFHA Wire Straighten and Cutoff Machine Machine 13585 5/8" to 1 1/4" max wire dia. 6' Rack Length 200 Feet Per Minute 200 HP Main Motor Drive High Speed Flying Shear Cutoff with Wichita Low Ine
1 1/4", MORGAN PRE FEED STRAIGHTENER (13858)
MACHINE 13858 One Used Morgan Heavy Duty Wire Pre Straightener Machine Maximum Diameter Material: 1 1/4" 2 Power Driven Entry Rolls 10 Roll 2 Plane Straightener **Temporary Specifications Subject to Revisions** **PRICE Q
RMG, No. CC 6500, double end saddle rod flipper (13863)
no description provided
7,000 lbs RMG MDL 2024-02 POWER DRIVEN UNCOILER (13884)
MACHINE 13884 MANUFACTURER: RMG USA MODEL: 2024-02 COIL WEIGHT: 7,000 lbs (3181 KG) CAPACITY: DIAMETER ROD: 0.520" (13.2mm) - 1.137" (28.88mm) COIL O D:
1-1/4" RMG Model 2024-02 Powered Uncoiler (13860)
MACHINE #13860 One Used RMG Model 2024-02 Powered Uncoiler 4,000 Lbs. Maximum Coil Weight 1 1/2" Maximum Diameter Mild Steel .630" Minimum Coil Diameter 30 FPM 12" Feed Roll Diameter Mandrel is 96" L x 11" Diameter 7200
13/16" KZRP-II, SCHUMAG,COMBINED DRAWING MACHINE FOR BAR (13854)
One used SCHUMAG MODEL KRZP-2 COMBINED DRAWING MACHINE MACHINE #13854 RATED CAPACITY Diameter Solid Bar: 8mm to 20mm Drawing Pull, Max: 8000 kg LINE DIRECTION: Left to Right LINE CONFIGURATION Uncoiler: Hydraulic Operati
3/4" (19.05mm) FASTENER ENG, MSC-750, WIRE DESCALING (13862)
MACHINE #13862 Fastener Engineers MSC-750 Wire Descaler Maximum Wire Diameter: 3/4" (.750")[19.05mm] Mechanical Wire Descaler 6 Cracker Rolls, 6 Guides Tri-Cleaner Wire Brush Unit **Temporary Specifications Subject to Re
MICRO WELD, No. J4S, .040 - .160 wire dia range (13869)
MACHINE 13869 One used Micro Products "Microweld" Model J4S Butt Welder s/n - 33801 .040 - .160 wire dia range 7 Amps 3 KVA Equipped with : Annealing attachment, wire cutter, 10 heat settings, mounted on wheels 460 volts
60" (1524mm) HOR-50H, MORGAN, DRAWING BLOCK 1-1/4" (31.75mm) CAP. (13855)
60" (1524mm) Dia. MORGAN HOR 50-H HORIZONTIAL IN LINE WIRE DRAWING BLOCK MACHINE #13855 Type: Wire Drawers Model: HOR 50-H Brand: MORGAN USA Serial # 5002 Year: 1985 Maximum Wire Diameter: 1 1/4" (31.75mm) Feet Per Minu
30" (762mm) MACBEE WIRE DRAWING BULL BLOCK (13877)
One used 30" MACBEE WIRE DRAWING BULL BLOCK (13877) MACHINE 13877 Capstan Diameter.........30" (762mm) Main Motor HP.........._____DC Volt ABB DCS800 Motor Drive ID# 1088 / D-1 (Note: AC transformer on floor, connected)
1/4", SHUSTER, Mdl 2A4EV75L, WIRE STRAIGHTEN AND CUT OFF (13839)
MACHINE 13839 1/4" Shuster Model 2A4EV75L Wire Straighten and Cutoff Machine Manufacturer: Shuster Machine Type Machine: Wire Straighten and Cutoff Capacity: .093"-.250" FPM (feed speeds): 28 to 300 Longest Cut: 3' Short
1/4", SHUSTER, Mdl 1AVS5, Wire Straighten and Cutoff (13840)
MACHINE 13840 1/4" Shuster Model 1AVS5 Wire Straightening & Cutoff Machine .062" - .250" Min/Max Cutoff Diameter 20 - 200 FPM 4' Runout Vari Drive Electrics: AC Motor & Controls Weight: 2,000# **Temporary Specifications
3/16", SHUSTER, No. 1A, WIRE STRAIGHTEN AND CUT OFF (13837)
MACHINE 13837 3/16" Shuster 1A Straighten And Cut Machine Wire Diameter Range: .062" - .187" Maximum Length: 7'8" Maximum Speed: 120 FPM Motor: 10 HP Electrics: 220/440V **Temporary Specifications Subject to Revisions**
3/16", LEWIS, No. 7D, WIRE STRAIGHTEN AND CUT OFF (13836)
MACHINE 13836 7D Lewis Wire Straighteners & Cut-Offs Type: Wire Straighteners & Cut-Offs Model: 7D Brand: LEWIS Serial # 146 Condition: Good Description: 3/16" Lewis 7D Wire Straighten And Cut Machine Wire Diameter Range
4 STAND TANDEM FENN/WATERBURY FARREL WIRE FLATTENING LINE (13838)
MACHINE 13838 MANUFACTURER ...................... FENN MFG & WATERBURY FARREL MFG NUMBER OF ROLL STANDS ............. 4 START & FINISH SIZE ............... .750" FINISH SIZE .200 FIRST PASS ROLL ................... 14" D
50,000 Lb. (22,680 Kg), VAUGHN, SINGLE CHAIN DOUBLE PULL, 40 FPM, 150 HP (13803)
MACHINE #13803 SPECIFICATIONS: MANUFACTURER ......... VAUGHN SERIAL ............... 61EC CAPACITY ............. 50,000 LBS. CONSTRUCTION ......... Single Chain Double Pull BENCH TABLE LENGTH ... 38' (11.58m) SPEED ......
POLYESTER-GLASS YARN WRAPPING VARNISH COATING MACHINE (13755)
MACHINE 13755 POLYESTER-GLASS YARN WRAPPING MACHINE Type: Copper wire wrapping Line for Copper Wire PG (Polyester-Glass Yarn Covered) Wrapping, Varnish Coating, Heating (Varnish Dry) Cooling Winding Industry: Copper rod
(3) WIRE INSULATION WRAPPING MACHINE, KOREA YOSHIDA,(13754)
MACHINE 13754 DOUBLE-GLASS YARN ENAMELED FLAT/ROUND WIRE COPPER WRAPPING MACHINE Type: Copper wire wrapping Industry: Electrical conductive manufacturing equipment Manufacturer: Korea Yoshida Ind. Co. Year of manufacture
No. IM-15, COOK, 13 DIE, WIRE DRAWER, .125" (3.175mm) - .005" (.127mm) (13753)
MACHINE #13753 MANUFACTURER: COOK MACHINERY CO. (U.S.A.) MODEL: IM-15 TYPE: CONE TYPE WET WIRE DRAWER No. OF DIES: 13 MAXIMUM ENTRY DIA.: .125" (3.175mm) MINIMUM EXIT DIA.: .005" (.127mm) No. OF CONES: 4 STEPPED CONES DR
Related Subcategories:
Condition:
  • X Used (104)
Location:
  • X Connecticut (104)
Price:
  •  to 
1 | 2 | 3 | 4 | 5 | 6