buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Wire Machinery > Connecticut

Wire Machinery in Connecticut For Sale

120 new & used wire machine items for sale in Connecticut
1 | 2 | 3 | 4 | 5 | 6
Refine: Viewing 1 - 20 of 120 matches
Sort by:
Items Per Page:  20  |  50 |  100
66,000 Lb. (30 M/TON), BULTMANN, 1990/2010, DRAW LENGTH 45' STEEL TUBE (13507)
MACHINE 13507 TUBE DRAW BENCH Manufacturer: BULTMANN (Germany) Type: 30, double pull Year: 1990/2010 Pulling force: 30 ton Working range:
FENN No. 2U UNIVERSAL TYPE TURKSHEAD (13495)
MACHINE #13495 SPECIFICATIONS MANUFACTURER: FENN MANUFACTURING CO MODEL: 2U TYPE: STANDARD SPEED TURKSHEAD CAPACITY -MAX SQUARE: .078" (2.0mm
No. DTVA-0715-36 FASTENER ENGINEERING, 5/8" (15.9mm), JUST RECONDITIONED (13500)
MACHINE# 13500 SPECIFICATIONS: Manufacturer: Fastener Engineering (U.S.A.) Model: DTVA-0715-36 Block Diameter: 36" (915mm) Type of Block: Horizontal Speed: 10-130 FPM (3-40m/min.)
30,000 Lb. (13,600 KG), VAUGHN, 3 DIE, MULTI-DIE CHAIN TYPE FOR TUBE (13499)
MACHINE# 13499 SPECIFICATIONS: Manufacturer: Vaughn Machine Co. (U.S.A.) Type: Multi-Die Chain Drawbench for Tube No. of Tubes Drawn: 3 Draw Pulling Force: 30,000 Lb. (13,600 Kg) N
16" (406mm) DRIVE CAPSTAN, WHITACRE, 3 STATION DOWNCOILER WIRE TAKE-UP (13443)
MACHINE# 13443 SPECIFICATIONS: Manufacturer: Whitacre Machine Corp. (USA) Type: Vertical Downlayer No. of Take-Up Stations: 3 (Independently Driven but mounted on a common base). Each
6" (150mm) x 3" (75mm) KUHARA 2 STAND, SPEED 100m/min., 200V/50HZ/60kW (13468)
MACHINE# 13468 SPECIFICATIONS: Manufacturer: Kuhara (Japan) Material: Copper wire Year of Manufacture: 2009 Entry Material Dia.: 0.5mm - 1.7mm (0.020" - 0.067") Typical Finish Size: 0.08mm (.003") thick x 2.0mm (.080") w
SCHUMAG, 2" (50mm), RAN ONE YEAR, w/VERT/HORIZ PRE-STRAIGHTENER (13465)
MACHINE# 13465 SPECIFICATIONS: Manufacturer: Schumag (Germany) Electrics: Fuji (Japan) Year of Manufacture: 2007 Operation time : Approx. one year Now dismantled Capacity: Material Diameter: Aluminum: 22mm - 60mm (0.86"
No. T10S BE TVN TECH, 10 PASS, WET WIRE DRAWING MACHINE (13245)
MACHINE 13245 MANUFACTURER: TVN TECH T.R.L/ITALY TYPE: 10 PASS WIRE DRAWING MACHINE STEP CONE TYPE WITH VERTICAL BLOCK MODEL: T10/S/BE CAPACITY:
36" (914mm) FASTENER ENG., PJC-275-475-36, 9/16" MAX, 31 FPM (13407)
MACHINE 13407 MANUFACTURER ............ FASTENER ENGINEERING SERIAL .................. #9701121 MODEL ................... PJC-275-475-36 WIRE DIAMETER ........... 9/16" CAPSTAN DIAMETER ........ 36" TORQUE ..............
10" (254mm) WIRE DRAWING BULL BLOCK (13426)
SPECIFICATIONS -TYPE: 10" VERTICAL BULL BLOCK -BLOCK -DRAW BAND DIAMETER: 9.5" (241.3mm) -DIAMETER AT TOP: 8.5" 215.9mm) -BLOCK HEIGHT: 9" (228.6mm) -DIE:
30,000 Lb. (13,600 KG), LOMBARD, 3 DIE TUBE DRAWBENCH, 100 FT (30M) DRAW (13482)
MACHINE# 13482 SPECIFICATIONS: Manufacturer: Lombard Machine Co. (U.S.A.) Type: Multi-Die Drawbench for Tube No. of Tubes Drawn: 1 or 3 (Set up as 3) Draw Pulling F
20,000 Lb. (9071 Kg) 2 DIE HYDRAULIC DRAWBENCH, 45 FT. (13.7m) DRAW (13467)
MACHINE# 13467 SPECIFICATIONS: Type of Drawbench: Hydraulic - for Tube Number of Dies: 2 Maximum Entry Tube Length: 21 Ft. (6.4m) Maximum Exit Draw Length: 45 Ft. (13.7m) Number of Chains: 2 Type of Feed: Barrel Rollover
2,000 Lb. (907 Kg) SINGLE DIE DRAWBENCH, 12 FT. (3.6m) DRAW, HYD. PULL (13466)
MACHINE# 13466 SPECIFICATIONS: Type of Drawbench: Hydraulic Pulling Force (Estimated): 2,000 Lbs. (907 Kg) Number of Dies: 1 Pulling Force: Hydraulic Cylinder (Not Chain) Maximum Incoming Tube Length: 10 Ft. (3.0m) Maxim
150,000 Lb. (75 TON) OCN 1 DIE FOR TUBE, ENTRY 50' (15m) 60' (18m) L (13388)
MACHINE# 13388 SPECIFICATIONS: Manufacturer: OCN Cantini (Italy) No. of Dies: 1 No. of Chains: 1 OCN Entry Single Mandrel Loading System, New 2014 Max. Entry Tube Length: 50' (15.25m) Max. Length of Draw: 60' (18.25m) Lu
30,000 Lb. (15 TON) OTT 3 DIE FOR TUBE, 40' (12m) ENTRY, 50' (15m) L (13387)
MACHINE# 13387 SPECIFICATIONS: Manufacturer: OTT (Italy) Type: Single, Double or Triple Draw Single Chain Barrel Rollover Mandrel Max. Entry Tube Length: 40' (12m) Max. Length of Draw: 50' (15.25m) Revamped 2013, includi
28" (711mm), DTI, IN LINE WIRE DRAWER 0.375" - 0.437" (9.5-11mm) (13380)
MACHINE: 13380 DTI WIRE DRAWING MACHINE.375" - .437" Manufacturer: DRAWING TECHNOLOGY Model: 4320-110 TB S/N: 051906-08 Year: 2006 Condition: GOOD Specifications: CAPSTAN DIAMETER 28" MAXIMUM RATED DRAW FORCE 6500 LBS MA
20" (508mm) DTM-03-20 FASTENER ENGINEERING IN LINE WIRE DRAWER (13370)
MACHINE 13370 1/4" FASTENER ENGINEERS DTM-03-20 WIRE DRAWER .250" Manufacturer: FASTENER ENGINEERS Model: DTM-03-20 S/N: 478-3720 Year: Condition: GOOD Specifications: MAXIMUM WIRE DIAMETER 1/4" (.250") HP 3 CAPSTAN 20"
100,000 Lb. HEAD WRIGHTSON DRWBNCH FOR BAR, 32' (9.7m) SINGLE DRAW, (13365)
MACHINE# 13365 SPECIFICATIONS: Manufacture: Head Wrightson, U.K. Capacity: 50 Ton (45,359 KG) Type: Single Draw Draw Length: 32 ft. (9.7m) Drawing Speed: 75 and 150 FPM (23 and 46m/min.) Carriage Return Speed: 400 and 13
5/16" (8mm) SHUSTER No. 26SFT, DUAL ARBOR, CAP. 0.093"- 0.312" (2-8mm) (133
MACHINE 13300 MAKE................... SHUSTER METTLER MODEL.................. 26SFT SERIAL NUMBER.......... 26SFT.102.78 AGE (APPROX)........... 1978 CAPACITY MILD STEEL.... .093" - .312" (2.36mm - 7.92mm) EQUIPPED WITH:
SCHUMAG 2 1/4"- 1 1/4" (58mm-32mm) CASCADE TUBE DRAWING LINE (13351)
MACHINE# 13351 Specifications: Manufacturer: SCHUMAG A.G. (Germany) Year of Manufacturing: 1989 IN LINE CASCADING COMBINED DRAWING MACHINES: #1 Schumag Combined Drawing Machine Model KP-Z-2B/12 Ton Pull #2 Schumag Combin
Related Subcategories:
Condition:
Location:
  • X Connecticut (120)
Price:
  •  to 
1 | 2 | 3 | 4 | 5 | 6