buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Corrugated & Sheet Metal > Illinois

Sheet Metal Equipment in Illinois For Sale

20 new & used sheet metal equipment items for sale in Illinois
1
Refine: Viewing 1 - 20 of 20 matches
Sort by:
Items Per Page:  20  |  50 |  100
GARY 3350 Super Duty Slitter
$RFQ
GARY 3350 Super Duty Slitter
• 3" diameter cold - roll turned, ground and polished shafts mounted in dual wall ball bearings lubricated for life. • Gauges on both sides for left or right hand use. • Rugged lightweight GARY Torsion Tube end fr
  • Maximum sheet capacity: 16Ga
    GARY 3350 Deluxe Slitter
    $RFQ
    GARY 3350 Deluxe Slitter
    • 3" diameter cold - roll turned, ground and polished shafts mounted in dual wall ball bearings lubricated for life. • Gauge mounted on each side for left or right hand use. • End frames are aluminum - magnesium a
    • Maximum sheet capacity: 16Ga
      GARY single cut Slitter
      $RFQ
      GARY single cut Slitter
      • Die-set type gauge mounting that insures easy setting and consistent squareness. • Gauge mounting rods are extended to provide convenient carrying handles. • Gauge is easily removed for machine transport and re-insta
      • Maximum sheet capacity: 16Ga
        JET PH-24 Planishing Hammer $1549
        $RFQ
        JET PH-24 Planishing Hammer $1549
        • Low cost pneumatically operated old style machine. You can flatten, smoothen, remove dents and finely shape complex sheet metal parts for antique cars, hot rods, motorcycles, airplanes, sculptures, etc. • 16 Gauge (
        JET WH-45T English Wheel $2299
        $RFQ
        JET WH-45T English Wheel $2299
        • Low cost manually operated old style machine. You can stretch, dome, and shape complex sheet metal parts for antique cars, hot rods, motorcycles, airplanes, sculptures, etc. • 16 Gauge (.006") Mild Steel Capaci
        Rotary Slitters
        $RFQ
        Rotary Slitters
        Sturdy 24 inch throat sheet metal slitters with quick adjusting back gauge and scale. Stand is optional. Choose from Gary (made in USA) or Tin Knocker (made in Vietnam). 1624 Rotary Slitter $2595. Tin Knocker or Ga
        • Maximum sheet capacity: 16Ga
          3 in 1 Combo Sheet Metal Machine
          $RFQ
          3 in 1 Combo Sheet Metal Machine
          Shear has squaring bar, adjustable hold-downs and back gauge. Capacity: .030" (22 gauge).[shear is not meant for constant use]Press Brake with segmented upper press brake die - box forming capable. Capacity: .030&q
          Diamond Pattern Forming Machine GMC DFM-20
          $RFQ
          Diamond Pattern Forming Machine GMC DFM-20
          This machine forms Diamond Plate Pattern on stainless steel for truck doors, catering trucks, kitchen, etc. Features: Capacity 50" x 20 gauge Stainless Steel. Motor: 2 HP, 110 Volts. Variable Speed. Infeed table
          3 in 1 Combination Machines Shear - Press Brake - Bending Rolls
          $RFQ
          3 in 1 Combination Machines Shear - Press Brake - Bending Rolls
          52 inch $1295. 40 inch $995. 30 inch $695. Shear has squaring bar, adjustable hold-downs and back gauge. Capacity: .030" (22 gauge). For light duty shearing use only. Press Brake with segmented upper press bra
          • Maximum sheet capacity: 22Ga
            JET pull lever Sheet Metal Corner Notcher
            $RFQ
            JET pull lever Sheet Metal Corner Notcher
            Notching Force: 4 Tons Maximum Notching size: 6" x 6 inches [150 x 150mm] Metal Notching Capacity: 16 gauge (.06") [1.6mm] Metal Piercing Capacity: 18 gauge (.045")[1.2mm] Stroke: 3/4 inch Weight: 165
            RAMS 24 gauge Drive Cleat End Notcher
            $RFQ
            RAMS 24 gauge Drive Cleat End Notcher
            • Notch Drive Cleats before and after they are formed. • Bench mount design. • Spring loaded handle. • Easy to change hardened steel blades. • Machine Dimensions: 4" x 6" • Weight: 20 Lbs. • Made in USA w
            RAMS 20 gauge CHEEK BENDER
            $RFQ
            RAMS 20 gauge CHEEK BENDER
            • Roller Guide End Plate • Effortless Bending • Quality needle bearing design • Made in USA with 2 year warranty
            TinKnocker 24" two sided CHEEK BENDER
            $RFQ
            TinKnocker 24" two sided CHEEK BENDER
            Bench mounted, this machine comes ready for service. Consistent bends are a certainty due to the two-way trunion keeping the bending apron in position at the origin of the bend. Adjusts for 1/4" to 7/8" bends
            RAMS 20 gauge CLEAT BENDER
            $RFQ
            RAMS 20 gauge CLEAT BENDER
            • 24 inch long • Quick Release built into lower handle • 3 Position handle - right / left / center • Quality needle bearing design • Made in USA with 2 year warranty
            Tin Knocker CLEAT BENDER
            $RFQ
            Tin Knocker CLEAT BENDER
            30 inch long. Quickly forms uniform drive cleat edges on rectangular duct with no required set up or adjustment. The upper handle forms the cleat and the lower handle opens the work space for easy removal of the metal. M
            RAMS 24 gauge CRIMPER-BEADER
            $RFQ
            RAMS 24 gauge CRIMPER-BEADER
            Made in USA. The RAMS hand operated Crimper-Beader machine will provide you with single pass crimping and beading. It will also allow fade away crimping by simply adjusting the knurled wheel (no tools needed). By removin
            • Maximum sheet capacity: 24Ga
              ROTARY CLADDING MACHINE
              $RFQ
              ROTARY CLADDING MACHINE
              Capacity: 22 gauge(.030") mild steel Depth of Throat: 7" Weight: 71 pounds Imported machine. 6 Standard Roll sets Included: 1/4" turning, 1/8" turning, wiring, crimping, burring, & ogee be
              • Maximum sheet capacity: 22Ga
                PITTSBURGH LOCK HAMMER
                $RFQ
                PITTSBURGH LOCK HAMMER
                Capacity: 16 gauge(.060") mild steel Weight: 75 pounds Imported machine
                ROTARY SLITTER by RAMS
                $RFQ
                ROTARY SLITTER by RAMS
                Heavy duty 24 inch throat slitters with accurate easy adjusting back gauge and scale. Shown without optional stand. Made in USA. Capacity: 16 Gauge (.06"). Speed: 65 FPM. 1 H.P. electric motor, 115/208-230V, Min
                ROTARY SLITTERS
                $RFQ
                ROTARY SLITTERS
                2024 Slitter $1995. 1624 Slitter $2395. Capactiy: 20 Gauge (.036") Capacity: 16 Gauge (.06") Throat: 24" Throa
                Related Subcategories:
                Categories:
                Condition:
                Manufacturer:
                Location:
                • X Illinois (20)
                Price:
                •  to 
                1