buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Drills & Tapping Machinery > Illinois

Drills & Tapping Machinery in Illinois For Sale

103 new & used drills & tapping machinery items for sale in Illinois
1 | 2 | 3 | 4 | 5 | 6
Refine: Viewing 1 - 20 of 103 matches
Sort by:
Items Per Page:  20  |  50 |  100
Technidrill Model GD/BTA-2.5-40-1A Single Spindle Combination Gun Drill/BTA
Serial No. 8/5/7274 New - 2008 SPECIFICATIONS: Capacities: - Drilling Diameter.............1/2" - 2-1/2" - Drilling Depth (w/Whip Guides)............72" - Work-Piece OD............8" - Part L
5' X 13" OOYA MODEL RE1450D RADIAL DRILL
SPECIFICATIONS Maximum Distance Spindle to Column 58.25 inches Minimum Distance Spindle to Column 11.625 inches Diameter of Column 13.625 inches Drilling Steel 2.375 inches Drilling Cast Iron 2.75 inches Boring in
DMG Mori, MILLTAP 700,Sinumerik 840D,Renishaw OTS & OMP,24K RPM,25 ATC,
New - 2012 Installed - 2013 Serial No. MIL70120807 SPECIFICATIONS: Travels: - X-Axis............27.6" - Y-Axis............16.5" - Z-Axis............15" Table: - Length............33.1" - W
Eldorado Model "B" Nose Grinding Fixture
The Model B gundrill sharpening fixture is the most widely used sharpening fixture in the world. The B fixture is used to sharpen gundrill bits from 0.075" (1.91 mm) - 1.0625" (26.99 mm) in diameter. The heavy
1 ½B X 81” PRATT & WHITNEY DEEP HOLE DRILLING MACHINE
SPECIFICATIONS Drilling Capacity, Diameter 1" - 2" Drilling Capacity, Length 81 inches Swing over Bed, Diameter 10 inches Distance between Spindles 12 inches Feed per Revolution of Spindle .0005" - .0
BROTHER TC-32A CNC DRILLING & TAPPING CENTER
SPECIFICATIONS Table Size 21.7" x 13.8" Maximum Load on Table (Uniform Load) 176 lbs x 2 X-Axis Travel 17.7 inches Y-Axis Travel 12.6 inches Z-Axis Travel 16.1 inches No. of Tool Positions 26 Maximum Spi
2008 HAAS MDC 500 CNC Mill Drill Center
Specifications: Control ........................................................................... Haas Table Size ......................................................... (2) 20” x 12.75” X Axis Travel ............
  • X axis travel: 20"
    KNUTH MODEL MF 1 P MULTI-PURPOSE MILLING MACHINE
    Working AreaTable set up area42x9 inNumber of T-slots3 positionsT-slot (width x spacing)0.63x2.5 inTravelsTravel X-axis26.4 inTravel Y-axis11 inTravel Z-axis15 inVertical Milling HeadSpindle speeds(16) 80 - 4,500 rp
    KNUTH MODEL KSR 40 ADVANCE RADIAL DRILL PRESS
    Working AreaDrilling capacity1.57 inTapping capacity, steelM 30 Throat37 inSpindle nose-to-table surface distance31 inColumn stroke15 inQuill stroke8 inHead swivel range± 90¡ Column diameter9 inTable set up area47x2
    KNUTH MODEL MF 1 VP MULTI-PURPOSE MILLING MACHINE
    Working AreaTable set up area49x9 inNumber of T-slots3 positionsT-slot (width x spacing)0.63x2.5 inTravelsTravel X-axis29.9 inTravel Y-axis11 inTravel Z-axis15 inVertical Milling HeadSpindle speeds(2) 60 - 4,200 rpm
    KNUTH MODEL BO T 130 CNC DRILLING MACHINE
      BO T 130 CNCBO T 130 L CNC Working AreaDrilling capacity1.97 inCounterbore diameter (max.)10 inTable set up area53x39 inTable load capacity11,000 lbsSpindle center-to-table distance0 -
    KNUTH MODEL SERVOMILL UWF SERVOCONVENTIONAL MILLING MACHINE
      Servomill¨ UWF 10Servomill¨ UWF 12Servomill¨ UWF 15 Working AreaTable dimensions49x18 in63x20 in79x20 inTable load capacity1,760 lbs2,200 lbs2,200 lbsNumber of T-slots5 positionsT-slots
    KNUTH MODEL BO T 110 CNC DRILLING MACHINE
      BO T 110 CNCBO T 110 L CNC Working AreaDrilling capacity1.97 inCounterbore diameter (max.)9 inFacing slide working diameter (max.)31 inTable set up area52x40 inTable load capacity11,000
    KNUTH SERVOMILL WFS 5 SERVOCONVENTIONAL MILLING MACHINE
    Working AreaTable set up area30x13 inSetup area (vertical)35.04x8.86 inTable load capacity (max.)352 lbsSlots (number/width/spacing)0.12x0.55x2.48 inSlots (number/width/spacing) vertical0.2x0.55x2.48 inSpindle nose-
    KNUTH MF 1 VKP MULTI PURPOSE MILLING MACHINE
    Working AreaTable set up area49x9 inNumber of T-slots3 positionsT-slots, spacing2.5 inT-slots, width0.6 inTravelsTravel X-axis29.9 inTravel Y-axis11 inTravel Z-axis15 inVertical Milling HeadSpeed range, infinitely v
    KNUTH SERVOMILL UFM 8 V SERVOCONVENTIONAL MILLING MACHINE
    Working AreaTable dimensions63x13 inTable load capacity990 lbsNumber of T-slots3 positionsT-slots, width0.7 inT-slots, spacing3.1 inTravelsTravel X-axis51.2 inTravel Y-axis11 inTravel Z-axis18 inTop slide travel22 i
    KNUTH BO 90 CNC DRILLING MACHINE
    Working AreaDrilling capacity1.18 inFinish bore8 inMilling capacity55 Table load capacity2,200 lbsTable dimensions25x31 inNumber of T-slots6 positionsT-slots, width0.7 inSpindle axis-to-table surface distance22.44 i
    KNUTH "SERVOMILL UWF 5" SERVO/CONVENTIONAL MILLING MACHINE
    Working AreaTable dimensions63x13 inTable load capacity660 lbsNumber of T-slots3 positionsT-slots, width0.7 inT-slots, spacing3.1 inTravelsTravel X-axis51.2 inTravel Y-axis11 inTravel Z-axis18 inMilling HeadSpeed ra
    KNUTH MODEL "R 60 VT" RADIAL ARM DRILL
    Working AreaDrilling capacity2.36 inTapping capacity, cast-ironM 50 Tapping capacity, steelM 45 Drilling depth (max.)12 inThroat14 - 63 inSpindle nose-to-table surface distance14 - 49 inDrill head travel (horizontal
    KNUTH "Servomill UWF 12" SERVOCONVENTIONAL MILLING MACHINE
    Working AreaTable dimensions63x20 inTable load capacity2,200 lbsNumber of T-slots5 positionsT-slots, width0.7 inT-slots, spacing3.1 inTravelsTravel X-axis47.2 inTravel Y-axis28 inTravel Z-axis20 inMilling HeadSpeed
    Related Subcategories:
    Condition:
    Location:
    • X Illinois (103)
    Price:
    •  to 
    1 | 2 | 3 | 4 | 5 | 6