buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Lathes & Turning Centers > Illinois

Lathes & Turning Centers in Illinois For Sale

592 new & used lathe or turning center items for sale in Illinois
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 1 - 20 of 592 matches
Sort by:
Items Per Page:  20  |  50 |  100
Doosan Puma 240MS, 21.7" Sw, 8"X, 22.8"Z, 22.8"B, Sub S
Year Built - 2009 SPECIFICATIONS: Turning Diameter - Maximum............11.4" Machining Length - Maximum............19.7" Swing Over Bed - Maximum............21.7" Distance Between Spindles.........
11" x 18" Hardinge HLV-H, Inch Threading, 5C Collet, 2-Axis DRO,
Year Built - 1971 Rebuilt by Iverson - 2022* Serial No. HLV-H-4842 Motor driven with 2-Speed, 3Ph/60Hz/460 volt variable speed drive unit with direct reading spindle speed indicator and controls. Hardinge Super-Prec
Brother Speedio M140X2 5-axis CNC Vertical Drilling, Milling, and Turning C
Brother Speedio M140X2 5-axis CNC Vertical Drilling, Milling, and Turning Center SPECIFICATIONS: Maximum Spindle Speed 16,000 RPM Travels: X-axis 7.9” (200mm) Travels: Y-axis 17.3” (440mm) Travels: Z-axis 12” (305
Brother Speedio M140X2 5-axis CNC Vertical Drilling, Milling, and Turning
Brother Speedio M140X2 5-axis CNC Vertical Drilling, Milling, and Turning Center SPECIFICATIONS: Maximum Spindle Speed 16,000 RPM Travels: X-axis 7.9” (200mm) Travels: Y-axis 17.3” (440mm) Travels: Z-axis 12” (305
Brother Speedio M140X2 5-axis CNC Vertical Drilling, Milling, and Turning
Brother Speedio M140X2 5-axis CNC Vertical Drilling, Milling, and Turning Center SPECIFICATIONS: Maximum Spindle Speed 16,000 RPM Travels: X-axis 7.9” (200mm) Travels: Y-axis 17.3” (440mm) Travels: Z-axis 12” (305
14" x 40" Enterprise EL-2, 1.5" Bore, 8" 3-Jaw Chuck, I
Serial No. 1731 SPECIFICATIONS: Swing Over Bed............14" Swing Over Cross Slide............9" Distance Between Centers............40" Bore Diameter............1.5" Spindle: - # of Speed
Feeler FTL-618E, 11" x 18", Inch Threading, 1.25" Bore, 5&qu
Year Built - 2004 Serial No. 8E109 SPECIFICATIONS: Swing Over Bed............11" Swing Over Cross Slide............6-1/2" Swing Over Carriage............9" Distance Between Centers............18&qu
11" x 18" Hardinge HLV-H, Inch Thrd, Taper, 5C Collet, Compound C
Serial No. HLVH-8676T New - 1990 Motor driven with 2-Speed, 3/60/230 volt variable speed drive unit with direct reading spindle speed indicator and controls. Hardinge Super-Precision ball bearing spindle. Hardinge ta
11" x 18" Hardinge HLV-H, Inch Thrd, Taper, 5C Collet, Compound C
Serial No. HLV-H-11377T Year Built – 1993 Motor driven with 2-Speed, 3Ph/60Hz/460 volt variable speed drive unit with direct reading spindle speed indicator and controls. Hardinge Super-Precision ball bearing spindle
22"/31" x 120" Acra 22120, 19.5" 4-Jaw Ck, 4"Bore,
Serial No. CH08824 Year Built - 2007 CATALOG SPECIFICATIONS: Swing: - Over bed............22" - Over cross slide............13-3/8" - In gap............31-3/8" Distance between centers............
Leadwell T5 CNC Gang Slide Lathe
SPECIFICATIONS: Max Swing 12.99” Max Turning Diameter 5.35” Max Turning Length 5.35” Bar Capacity 1.6” X-axis 9” Y-axis 9” Spindle Speeds 45-4500 RPM Chuck Size 6” (Currently Collet Setup) Spindle Nose A2-6 Spi
Haas TM-1 CNC Vertical Mill
SPECIFICATIONS: Table Size 10.5” x 47.8” X-Travel 30” Y-Travel 12” Z-Travel 16” Rapid Feedrate (X, Y, Z) 200 ipm Spindle Speed 4,000 RPM Spindle Taper CAT40 Spindle Motor 7.5 HP Approximate Weight 5,000 lbs.
Mazak M-5N 2000 CNC Flat Bed Lathe
SPECIFICATIONS: Swing over Bed 24” Swing over Cross Slide 13” Distance between Centers 82” Chuck Diameter 18” 3-Jaw Spindle Nose A1-II Spindle Bore 5-1/2” Front Turret 6-Positions Rear Turrret 8-Positions Tailst
Hardinge HSL59, 3-Speed, 750 - 1800 - 3000 RPM, 9" Sw, 10" Bed
Serial No. HSL-5C-6805-T SPECIFICATIONS: Spindle Capacity: - Round 5C collets............1-1/16" - Hexagon 5C collets............7/8" - Square 5C collets............3/4" - Step Chucks............6&
Mori Seiki NL2000/500, 8"Ck, 2.5"Bore, 20"L Cap, 12-Sta Turr
New - 2007 Serial No. NL201GB1665 Chuck Size............8" Bar Diameter Capacity - Maximum............2.5" Machining Length - Maximum............20.1" Spindle: - Motor............24.8 HP - S
Victor 618 EM, 11" x 18", In/mm, 3,000 RPM, 5C, 5"Ck, Aloris
New - 2002 Serial No. 9007497 SPECIFICATIONS: Spindle Capacity 5C Collets - Round............1-1/16" Spindle Capacity 5C Collets - Hex............7/8" Step Chucks............1-1/16" to 6" Vari
22"/31" x 79", Tarnow TUJ50M, 15-3/4" 4-Jaw Ck, 3-Pt St
Year Built - 2003 Serial No. - 3957G SPECIFICATIONS: Swing: - Over Bed............22.05" - In Gap............31.5" - Over Carriage............15.57" Length of Gap............9.84" Dist
2012 Romi GL280M CNC Turning Center With Live Tooling, Tailstock, Barfeeder
SPECIFICATIONS: SWING 23.15" MACHINING LENGTH 21.26" # AXIS 3 Z TRAVEL 20" CHUCK SIZE 10" BAR CAPACITY 3" POWER 25 hp MAX RPM 3,500 RPM TURNING DIA 11" TAILSTOCK Yes LIVE TOOLI
  • Swing: 23.15"
    2020 Tsugami M08SY CNC Live Tool Sub Spindle Lathe with Barfeeder
    SWING 11" # AXIS 3 X TRAVEL 8.7" Z TRAVEL 14.96" CHUCK SIZE 8" BAR CAPACITY 2.5" POWER 14.8 hp MAX RPM 4,500 RPM TURNING DIA 11.02" LIVE TOOLING Yes SUB SPINDLE Yes BARFEED Yes C
    • Swing: 11"
      2005 Haas TL-3 CNC Tool Room Lathe
      Specifications: Control ................................................................................... Haas Swing Over Bed ..................................................................................... 20”
      • Swing: 20"
      • Centers: 60"
        Related Subcategories:
        Location:
        • X Illinois (592)
        Price:
        •  to 
        1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>