buy & sell, new & used machinery, machine tools & equipment

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 251 - 300 of 1190 matches
Sort by:
Items Per Page:  20 |  50  |  100
Snow HD-1-S Tapper
$RFQ
Snow HD-1-S Tapper
With Vibe Hopper
RMG Wire Drawer
$RFQ
RMG Wire Drawer
No description provided
Nakashimada Cold Header
$RFQ
Nakashimada Cold Header
No description provided
3/16" National DSSD Standard Stroke Cold Header
$RFQ
3/16" National DSSD Standard Stroke Cold Header
No description providedMaximum Cutoff Diameter3/16" Maximum Cutoff Length1-3/4" Maximum Shank Length1" Maximum Production225 PPM Approx. Weight4,100
Kellogg American 20 HP 2 Stage Reciprocating Compressor
$RFQ
Kellogg American 20 HP 2 Stage Reciprocating Compressor
No description providedPower20 horsepowerElectrics220V 60 Hz 3 Phase
Brown & Sharpe 6 X 18 Surface Grinder
$RFQ
Brown & Sharpe 6 X 18 Surface Grinder
Equipped with Ceramax 6" x 18" Magnetic Chuck&nbsp;<br /><br />Electrics:&nbsp; 220V<br />Capacity:&nbsp; 18" Length<br />&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nb
Everett Cut-Off Saw
$RFQ
Everett Cut-Off Saw
Voltage: 208/220/440<br />Mounted on Bench
Del Tech Model HGE 100 Air Dryer
$RFQ
Del Tech Model HGE 100 Air Dryer
100 SCFM @ 100PSIG &amp; 100 deg. F<br />Maximum Working Pressure: 232 PSIG<br />Maximum Inlet Temperature: 120 Deg. F<br />Electrics: 115V
Dake 25T H Frame Press
$RFQ
Dake 25T H Frame Press
No description providedTonnage25 tons
Reed Model A75 VN Thread Roller
$RFQ
Reed Model A75 VN Thread Roller
No description providedMaximum Thread Diameter.050" -.138" Screw Shank .050"- .200 Ring Shank Maximum Thread Length3" Production1500 PPM Motor15 HP With Vibe Bowl<
Snow HT1-BC Horizontal Tapper
$RFQ
Snow HT1-BC Horizontal Tapper
No description providedRated Capacity in Mild Steel#60 to #2 Drill Spindle Nose to Face of Back Plate4-1/2" Minimum Spindle Nose Data#1 Morse Tapper Standard Spindle Speeds1875/2600/4850/6750 Approx. Weight800 lbs Approx
Snag Detector Heavy Duty
$RFQ
Snag Detector Heavy Duty
With Extra Ring
Walker Turner Vertical 14" Model 32 Band Saw
$RFQ
Walker Turner Vertical 14" Model 32 Band Saw
No description providedCapacity14" Blade to Frame Capacity7" Guide to Table Electrics220 Volt, 3 Phase Approx. Weight450 lbs. Approx. Floor Size26" W x 20" L x 70" H
XY Tool Bar Shear
$RFQ
XY Tool Bar Shear
No description providedCapacity3/4" to 1.75" Cutting Force130 Tons Shear Length12" to 36" Maximum Bar Length43' (3-15' Bar Feeds) Hydraulic Unit Motor100 Horsepower Auto CycleYes
Bridgeport/Harig 618 EZ Surf Surface Grinder
$RFQ
Bridgeport/Harig 618 EZ Surf Surface Grinder
No description providedMaximum Grinding Capacity6" x 18" Maximum Longitudinal Table Travel20" Maximum Cross Feed Travel6.75" Distance from Spindle Center to Table12" Variable Table Speed1/4" to 30 FPM Approx. Weight2,750
Schenker KA-1B Staple Machine
$RFQ
Schenker KA-1B Staple Machine
No description providedWire Diameter1 Wire .016" - .032" Wire Diameter2 Wires .016" - .024" Maximum Wire LengthUp to 1.6" Leg LengthUp to .60" Shoulder WidthUp to .60" Wire Feeds2 Output Per MinuteUp to 1100 Pieces Lengt
1/4" Warren WT-1000 High Speed Automated Flat Die Thread Roller
$RFQ
1/4" Warren WT-1000 High Speed Automated Flat Die Thread Roller
No description providedDie Requirement"0" or "00" Screw Diameter Capacity#2 to #12 (1/4") Speed Range90 to 1000 PPM Maximum Blank LengthUp to 3" Die Pocket Depth3" Approx. Weight4500 lbs Approx. Floor Size56" x 52" x 68"
1/2" Videx Model VC-20-MH Wire Straighten & Cutoff Machine
$RFQ
1/2" Videx Model VC-20-MH Wire Straighten & Cutoff Machine
No description providedWire Diameter Range.20" - .50" (5.2 - 13mm) Cutoff Length Range.375" - 12' Maximum Production300 FPM Electrics480V
1-5/16" National 1250 Cold Former
$RFQ
1-5/16" National 1250 Cold Former
No description providedProduction55 - 65 PPM Maximum Cutoff Diameter33.5mm (1-5/16") Maximum Die Kickout225mm (9") With Boltmaker Transfer, Arranged For TKO, Includes
Nilson S-3 Fourslide
$RFQ
Nilson S-3 Fourslide
No description providedStandard Feed Length15" Strokes Per Minute32 - 130 Motor3 HP Approx. Floor Size79" L x 62" W Wire Diameter3/16" Maximum Strip Width1-5/8" With 2
5/16" Lewis 2CV Short Cut Machine
$RFQ
5/16" Lewis 2CV Short Cut Machine
No description providedWire Diameter Range1/16" - 5/16" Maximum Length6" Max. Minimum Length1/2" Maximum Production615 @1/2" - 1-1/2" Maximum Production410 - up to 3" Maximum Production205 - up to 6" Speed Range65 to 200
Sacma Model SP-660-AL 5 Die Cold Former
$RFQ
Sacma Model SP-660-AL 5 Die Cold Former
No description providedHeading Load4500 KN Number of Dies5 Maximum Cutoff Diameter27mm Maximum Cutoff Length300mm Die Kickout Range40-240mm Maximum Production90 PPM Punch Knockout Stroke64mm Max. Approx. Weight85,000 KG
42" Turntable
$RFQ
42" Turntable
<strong>Check out our full inventory&nbsp;<span style="color: #e74c3c;"><a style="color: #e74c3c;" href="https://www.fhmachinery.com">www.fhmachinery.com</a></span></strong>
34" Turntable
$RFQ
34" Turntable
Size:&nbsp; 34"&nbsp;<br /><br />&nbsp;<strong>Check out our full inventory&nbsp;<span style="color: #e74c3c;"><a style="color: #e74c3c;" href="https://www.fhmachinery.com">w
Wire Decoiler
$RFQ
Wire Decoiler
No description providedTop Plate Diameter42"
Pneumatic Wire Bender
$RFQ
Pneumatic Wire Bender
No description providedRotating Disc12" Diameter Table Size21" x 95" Foot Pedal
RMG Double End Saddle Rod Flipper CC 6500
$RFQ
RMG Double End Saddle Rod Flipper CC 6500
No description providedArm Length96" Base Dimensions8' x 8' Wire Diameter Range.218" - .625" Coil Width60" Coil weight is not a limiting factor. Flipper is designed to
Grob Vertical Band Saw Model Model 4V-24
$RFQ
Grob Vertical Band Saw Model Model 4V-24
No description providedThroat Depth24" Work Height12" Saw Blades1/8" - 1" Wide Approx. Weight1670 lbs
Yuasa CNC tilting rotary table, 4th axis, 5th axis, Fagor
$3,000
Yuasa CNC tilting rotary table, 4th axis, 5th axis, Fagor
Here is a Yuasa 4th and 5th axis CNC tilting rotary table. It has a standard Hardinge 2 3/16"-10 spindle and holds 5C collets also. The tilting axis has a 160mm dia plate. The motors are Fagor FXM AC servos.
AIR FLOW SYSTEMS AIR FILTER
$2,450
AIR FLOW SYSTEMS AIR FILTER
AIR FLOW SYSTEMS AIR FILTER PRICE: Loaded on Truck, Our Warehouse, York, PA …… $2,450.00 HMC Stock # 20063-P Machine Serial No.: 105114 Machine Model No.: T140-STD-PG3-EB-SP New Date: Jan. 2015 This unit is designe
TRINCO DRY BLAST CABINET
$2,950
TRINCO DRY BLAST CABINET
TRINCO DRY BLAST CABINET PRICE: Loaded on Truck, Our Warehouse, York, PA …… $2,950.00 HMC Stock # 20040-P Machine Serial No.: 18662-1 Machine Model No.: 60X48 New Date: Unknown Dual Station (1) Set of Work Gloves -
1997 STAR SR-20 SWISS STYLE CNC LATHE, FANUC 16T, 20MM BAR, BARFEED
$RFQ
1997 STAR SR-20 SWISS STYLE CNC LATHE, FANUC 16T, 20MM BAR, BARFEED
SPECIFICATIONS MAXIMUM MACHINING DIAMETER: 20 MM (3/4") MAIN SPINDLE BORE: 15/16” MAXIMUM HEADSTOCK STROKE: 8” MAXIMUM DRILLING CAPABILITY (STATIONARY): 5/16" MAXIMUM DRILLING CAPABILITY (POWER-DRIVEN) 3/
  • Spindle hole diameter: 0.787"
    2015 FANUC ROBODRILL α-D21iLA5 DRILL & TAP CENTER, 27.5" x 15.7&q
    $RFQ
    2015 FANUC ROBODRILL α-D21iLA5 DRILL & TAP CENTER, 27.5" x 15.7&q
    TRAVELS X-AXIS: 27.55" Y-AXIS: 15.74" Z-AXIS: 12.99" TABLE TABLE SIZE: 33.46" X 16.4" LOAD CAPACITY: 660 LBS SPINDLE SPINDLE SPEED: 24,000 RPM SPINDLE TAPER: BT-30 SPINDLE NOSE TO
    • X axis: 27.5"
    • Y axis: 15.7"
      2015 FANUC ROBODRILL α-D21iLA5 DRILL & TAP CENTER, 27.5" x 15.7&q
      $RFQ
      2015 FANUC ROBODRILL α-D21iLA5 DRILL & TAP CENTER, 27.5" x 15.7&q
      TRAVELS X-AXIS: 27.55" Y-AXIS: 15.74" Z-AXIS: 12.99" TABLE TABLE SIZE: 33.46" X 16.4" LOAD CAPACITY: 660 LBS SPINDLE SPINDLE SPEED: 24,000 RPM SPINDLE TAPER: BT-30 SPINDLE NOSE TO
      • X axis: 27.5"
      • Y axis: 15.7"
        BICO PULVERIZER
        $2,950
        BICO PULVERIZER
        BICO PULVERIZER PRICE: Loaded on Truck, Our Warehouse, York, PA …… $2,950.00 HMC Stock # 20026 Machine Serial No.: Unknown Machine Model No.: UA New Date: Unknown Direct Drive Capacity: 1 Lb. Per Minute Input Size
        AVEREX (AKARI) HS-450i HORIZONTAL MACHINING CENTER, FANUC CONTROL
        $RFQ
        AVEREX (AKARI) HS-450i HORIZONTAL MACHINING CENTER, FANUC CONTROL
        4,574 POWER ON HOURS 929 RUN HOURS 277 CUTTING HOURS MANUFACTURED IN 2015 | INSTALLED IN 2018 SPECIFICATIONS TRAVELS X-AXIS: 25.2” Y-AXIS: 24” Z-AXIS: 26.8” SPINDLE CENTER TO PALLET TOP: 2” – 26” SPINDL
        • X axis: 25.2"
        • Y axis: 24"
          2002 HAAS MODEL SL-30T CNC LATHE WITH HAAS CONTROL, 10" CHUCK
          $RFQ
          2002 HAAS MODEL SL-30T CNC LATHE WITH HAAS CONTROL, 10" CHUCK
          SWING DIAMETER OVER FRONT APRON: 30" OVER CROSS SLIDE: 14.5" CAPACITIES CHUCK SIZE: 10" STANDARD BAR CAPACITY: 2.5" MAXIMUM CUTTING DIAMETER: 14.5" MAXIMUM CUTTING LENGTH: 34" SP
          • Swing: 30"
          • Centers: 34"
            K O LEE MODEL B982-5C AIR BEARING FIXTURE WITH COLLET DRAWBAR FOR 5C COLLET
            $1,500
            K O LEE MODEL B982-5C AIR BEARING FIXTURE WITH COLLET DRAWBAR FOR 5C COLLET
            THIS PRECISION WORKHOLDING FIXTURE PROVIDES FAST, ACCURATE SHARPENING OF END MILLS AND MILLING CUTTERS. THE AIR-SUSPENDED, MOVABLE SPINDLE PRINCIPLE FOR GRINDING SMALLER CUTTERS AVOIDS THE PROBLEMS OF INSENSITIVE TABLE
            K O LEE MODEL B982-5C AIR BEARING FIXTURE WITH COLLET DRAWBAR FOR 5C COLLET
            $RFQ
            K O LEE MODEL B982-5C AIR BEARING FIXTURE WITH COLLET DRAWBAR FOR 5C COLLET
            THIS PRECISION WORKHOLDING FIXTURE PROVIDES FAST, ACCURATE SHARPENING OF END MILLS AND MILLING CUTTERS. THE AIR-SUSPENDED, MOVABLE SPINDLE PRINCIPLE FOR GRINDING SMALLER CUTTERS AVOIDS THE PROBLEMS OF INSENSITIVE TABLE
            2) USED FLOW MACH 2 1313B CNC WATERJETS WITH FLOW 20XW 100 HP PUMP, 4’ X 4’
            $RFQ
            2) USED FLOW MACH 2 1313B CNC WATERJETS WITH FLOW 20XW 100 HP PUMP, 4’ X 4’
            SPECIFICATIONS CUTTING AREA: 4’ X 4’ ACCURACY: + 005 PER 3’ RAPID TRAVERSE: 400 IPM FLOW 20XW ULTRA HIGH PRESSURE DUAL INTENSIFIER PUMP • 100 HP MOTOR • 60,000 PSI • POWERS MULTIPLE NOZZLES • SOUND ABATEMENT
            KITAMURA MYCENTER-4XD#50 VMC, BOX WAYS & 4TH AXIS ROTARY TABLE, 43.3” X
            $RFQ
            KITAMURA MYCENTER-4XD#50 VMC, BOX WAYS & 4TH AXIS ROTARY TABLE, 43.3” X
            TRAVELS X-AXIS: 43.3” Y-AXIS: 24” Z-AXIS: 24” SPINDLE TAPER: #50 SPEED: 10,000 RPM MOTOR (30 MIN): 35 HP MOTOR (CONTINUOUS): 30 HP SPINDLE TORQUE (30 MIN): 488.3FT/LBS TABLE SIZE: 25.2” X 50” MAXIMUM WO
            • X axis: 43.3"
            • Y axis: 24"
              K O LEE MODEL B982-5C AIR BEARING FIXTURE WITH COLLET DRAWBAR FOR 5C COLLET
              $1,250
              K O LEE MODEL B982-5C AIR BEARING FIXTURE WITH COLLET DRAWBAR FOR 5C COLLET
              THIS PRECISION WORKHOLDING FIXTURE PROVIDES FAST, ACCURATE SHARPENING OF END MILLS AND MILLING CUTTERS. THE AIR-SUSPENDED, MOVABLE SPINDLE PRINCIPLE FOR GRINDING SMALLER CUTTERS AVOIDS THE PROBLEMS OF INSENSITIVE TABLE
              • Maximum workpiece diameter: 1"
                TORIT MODEL 64 DUST COLLECTOR, 400 CFM
                $350
                TORIT MODEL 64 DUST COLLECTOR, 400 CFM
                TYPE: CABINET/FILTER STYLE CFM: 400 CFM INPUT HOSE: 4” MOTOR: 3/4 HP DIMENSIONS: 22" LR X 24" FB X 33" H
                • Motor: 0.75HP
                  ROCKWELL DELTA MODEL 15-655 TABLE DRILL, 15"
                  $450
                  ROCKWELL DELTA MODEL 15-655 TABLE DRILL, 15"
                  SPECIFICATIONS 5 STEP PULLEY: 425-5500 JACOBS CHUCK: 1/2" TABLE: 11" X 14" QUILL TRAVEL: 5" GENERAL ELECTRICS: 115 VOLTS DIMENSIONS: 19” X 42” X 42” EQUIPPED WITH DRILL CHUCK C
                  • Swing: 15"
                    ROCKWELL DELTA MODEL 15-655 TABLE DRILL, 15"
                    $450
                    ROCKWELL DELTA MODEL 15-655 TABLE DRILL, 15"
                    SPECIFICATIONS 5 STEP PULLEY: 425-5500 JACOBS CHUCK: 1/2" TABLE: 11" X 14" QUILL TRAVEL: 5" GENERAL ELECTRICS: 115 VOLTS DIMENSIONS: 19” X 42” X 42” EQUIPPED WITH DRILL CHUCK C
                    • Swing: 15"
                      BLACK DIAMOND MODEL DD2 BENCH TYPE DRILL GRINDER, 1/8” – 1-1/2”
                      $RFQ
                      BLACK DIAMOND MODEL DD2 BENCH TYPE DRILL GRINDER, 1/8” – 1-1/2”
                      SPECIFICATIONS DRILL SIZES: 1/8” TO 1-1/2” CUP WHEEL: 6” X 1-1/4” X 1-1/8” GRINDING WHEEL: 6” X 7/8” X 1-1/8” DRILL POINT ANGLE: 59° (ADJUSTABLE FROM 40° TO 70°) CLEARANCE (VARIABLE): 5° TO 16&#
                      • Maximum drill capacity: 1.5"
                        1981 K O LEE MODEL B2000 UNIVERSAL TOOL & CUTTER GRINDER, 8-1/4"
                        $RFQ
                        1981 K O LEE MODEL B2000 UNIVERSAL TOOL & CUTTER GRINDER, 8-1/4"
                        SPECIFICATIONS DISTANCE BETWEEN TAILSTOCKS: 32" DISTANCE BETWEEN WORK HEAD & TAILSTOCK CENTERS: 26" DISTANCE BETWEEN WORK HEAD COLLET AND TAILSTOCK: 27" DISTANCE BETWEEN CHUCK FACE AND TAILSTOC
                        1990 OPTIMA OPTICAL DRILL GRINDER, 1"
                        $RFQ
                        1990 OPTIMA OPTICAL DRILL GRINDER, 1"
                        ONLY THE OPTIMA HAS A RANGE FROM .0135" TO 1.000" DIA. IT WILL GRIND RIGHT AND LEFT HAND DRILLS, HIGH SPEED STEEL AND CARBIDE TIPPED OR SOLID CARBIDE DRILLS, SPADE DRILLS, COUNTERSINKS, CENTER DRILLS OF ALL TY
                        • Maximum drill capacity: 1"
                          1976 CINCINNATI #2 MODEL DO TOOL & CUTTER GRINDER, 5-1/4” X 37”
                          $RFQ
                          1976 CINCINNATI #2 MODEL DO TOOL & CUTTER GRINDER, 5-1/4” X 37”
                          CAPACITY SWING OVER TABLE: 10-1/2" LENGTH, BETWEEN TAILSTOCKS: 33" LENGTH, BETWEEN TAILSTOCK & WORKHEAD: 28" FACE MILLS ON WORKHEAD (MAX DIAMETER): 10" SAWS ON TABLE (DIAMETER 48" FORME
                          • Maximum workpiece diameter: 10"
                            2016 OKUMA MB-5000H HORIZONTAL MACHINING CENTER, 19.7" Pallets
                            $209,500
                            2016 OKUMA MB-5000H HORIZONTAL MACHINING CENTER, 19.7" Pallets
                            11,964 POWER ON HOURS 3,325 OPERATING HOURS 2,204 CUTTING HOURS SPECIFICATIONS TRAVELS X-AXIS: 29.92” Y-AXIS: 29.92” Z-AXIS: 29.92” SPINDLE CENTER TO PALLET TOP: 1.97” – 31.89” SPINDLE NOSE TO PALLET CE
                            • X axis: 29.92"
                            • Y axis: 29.82"
                              Categories:
                              Condition:
                              Manufacturer:
                              Location:
                              • X Pennsylvania (1190)
                              Price:
                              •  to 
                              1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>