buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Machining Centers - CNC > Pennsylvania

CNC Machining Centers in Pennsylvania For Sale

53 new & used cnc machining center items for sale in Pennsylvania
1 | 2 | 3
Refine: Viewing 41 - 53 of 53 matches
Sort by:
Items Per Page:  20  |  50 |  100
1999 DAEWOO DMV-500 VMC, MITSUBISHI MELDAS 64 CONTROL, 40.2" X 19.7&qu
$RFQ
1999 DAEWOO DMV-500 VMC, MITSUBISHI MELDAS 64 CONTROL, 40.2" X 19.7&qu
SPECIFICATIONS TABLE SIZE: 47.2" X 19.7" X-AXIS TRAVEL: 40.2" Y-AXIS TRAVEL: 19.7" Z-AXIS TRAVEL: 20.1” SPINDLE TAPER: 40 SPINDLE DRIVE MOTOR (30 MIN/CONT.): 20/15 HP MAXIMUM SPINDLE SPEED: 8
  • X axis: 40.2"
  • Y axis: 19.7"
    1997 DAEWOO ACE 50 VMC, MITSUBISHI MELDAS 64 CONTROL, 40” X 20” X 20”
    $RFQ
    1997 DAEWOO ACE 50 VMC, MITSUBISHI MELDAS 64 CONTROL, 40” X 20” X 20”
    SPECIFICATIONS TABLE SIZE: 47.2" X 19.7" MAXIMUM TABLE LOAD: 1,760 LBS SPINDLE NOSE TO TABLE TOP: 5.9” – 26” (EVENLY DISTRIBUTED) X-AXIS TRAVEL: 40” Y-AXIS TRAVEL: 20” Z-AXIS TRAVEL: 20” RAPID TRAVERS
    • X axis: 40"
    • Y axis: 20"
      Ingersoll 5-Sided Machining Center
      $RFQ
      Ingersoll 5-Sided Machining Center
      Category Machining Center, Bridge Type, Vertical Manufacturer Ingersoll / Waldrich Model 5-Sided Machining Center Year 1986 / 2010 Control New Siemens 840 CNC X – Table Travel 252.00in, 6400.80 mm Y – Saddle
      Giddings & Lewis 924-25VSP
      $RFQ
      Giddings & Lewis 924-25VSP
      Category Machining Centers - Vertical Manufacturer Giddings & Lewis Model 924-25VSP Serial Number 924-0024-87 Year 1987 / 1990 Control Numeripath 8000-N CNC X - Travel 50.00 in 1270 mm Y - Travel 52
      Giddings & Lewis 987-15HS Traveling Column
      $RFQ
      Giddings & Lewis 987-15HS Traveling Column
      Category Machining Centers - Horizontal Manufacturer Giddings & Lewis Model 987-15HS Traveling Column Year 1982 Control Existing G & L 800 X – Horizontal Cross Travel 72.00 in 1828.8 mm Y – Vertica
      Enshu SS400 Vertical Machining Center
      $RFQ
      Enshu SS400 Vertical Machining Center
      Category Machining Centers - Vertical Manufacturer Enshu Model SS400 (Special Version) Serial Number OOC019 Year 2001 Control Fanuc 18M X - Travel 26 in 660.4 mm Y - Travel 18 in 457.2 mm Z - Travel
      HURCO BMC 30 Vertical Machining Center
      $RFQ
      HURCO BMC 30 Vertical Machining Center
      THIS MACHINE IS IN GOOD RUNNING CONDITION. IT WAS TRADED IN ON A NEWER MACHINE. THIS MACHINE WAS TAKEN OUT OF SERVICE IN 2008 AND JUST RECENTLY INSTALLED. IT IS UNDER POWER AND AVAILABLE FOR INSPECTION. Specs X: 30
      • X axis: 30"
      • Y axis: 20"
        HAAS VF-4 Vertical Machining Center
        $RFQ
        HAAS VF-4 Vertical Machining Center
        Specs X: 50 " Y: 20 " Z: 25 " Power: 20 hp RPM: 7500 rpm # ATC: 20 Table-W: 18 " Table-L: 52 " Taper: CAT-40 Control: HAAS Good running machine. Rough paint but new Vect
        • X axis: 50"
        • Y axis: 20"
          DAEWOO DMV-400 Vertical Machining Centers
          $RFQ
          DAEWOO DMV-400 Vertical Machining Centers
          22" x 15.7" x 22.4" travels, Two pallets, 10,000 rpm, 30 position side mount ATC, 40 taper Fanuc 18-M control. Specs X: 22 " Y: 15.7 " Z: 22.4 " Power: 15 hp RPM: 10000 rpm # A
          • X axis: 22"
          • Y axis: 15.7"
            2001 DAEWOO MYNX 500 CNC 4-AXIS VMC WITH FANUC 21M, 40" X 20" X 2
            $RFQ
            2001 DAEWOO MYNX 500 CNC 4-AXIS VMC WITH FANUC 21M, 40" X 20" X 2
            SPECIFICATIONS TABLE SIZE: 39" X 17" SPINDLE NOSE TO TABLE TOP: 4" - 29" X-AXIS TRAVEL: 40" Y-AXIS TRAVEL:
            • X axis: 40"
            • Y axis: 22"
              2001 - HARDINGE VMC800II VMC - 30" X 20" X 20"
              $RFQ
              2001 - HARDINGE VMC800II VMC - 30" X 20" X 20"
              SPECIFICATIONS TRAVELS X-AXIS: 31.50” Y-AXIS: 20.08” Z-AXIS: 20.08” Y-AXIS THROAT DISTANCE: 23” TABLE WIDTH: 20.00” LENGTH: 36.40” LOAD CAPACITY: 1,540 LBS T-SLOTS (# & SIZE): .708” X 3 X 6.3” SPINDLE TAPER: 40 SPEED
              • X axis: 30"
              • Y axis: 20"
                1993 - SUPERMAX MODEL MAX 8 GEARED HEAD VERTICAL MACHINING CENTER WITH FANUC OM CONTROL, 6
                $RFQ
                1993 - SUPERMAX MODEL MAX 8 GEARED HEAD VERTICAL MACHINING CENTER WITH FANUC OM CONTROL, 6
                SPECIFICATIONS SPINDLE SPINDLE SPEED: 4000 RPM SPINDLE TAPER: CT-50 FRONT BEARING DIAMETER: 3.94″ TRAVEL X-TRAVEL: 65″ Y-TRAVEL: 27.5″ Z-TRAVEL: 27.5″ DISTANCE BETWEEN SPINDLE NOSE AND TABLE TOP: 7.87″ – 35.4″ DISTANCE
                • X axis: 65"
                • Y axis: 27"
                  1997 - HURCO MODEL BMC-30/SSM 3-AXIS CNC MACHINING CENTER, 30″ X 18″ X 24″, WITH ULTIMAX S
                  $RFQ
                  1997 - HURCO MODEL BMC-30/SSM 3-AXIS CNC MACHINING CENTER, 30″ X 18″ X 24″, WITH ULTIMAX S
                  SPECIFICATIONS TABLE WORKING SURFACE: 40.1″ X 15.7″ TABLE T-SLOTS: 3 X .71″ ON 4.92″ CENTERS TABLE LOAD W/UNIFORM DISTRIBUTION: 1,100 LBS SPINDLE MOTOR HORSEPOWER, (30 MINUTES): 10 HP HORSEPOWER, (CONTINUOUS): 7.5 HP T
                  • X axis: 30"
                  • Y axis: 18"
                    Related Subcategories:
                    Categories:
                    Condition:
                    Manufacturer:
                    Location:
                    • X Pennsylvania (53)
                    Price:
                    •  to 
                    1 | 2 | 3