buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Used > New Jersey

Used Machine Tools in New Jersey

2219 used machine tools items for sale in New Jersey
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 51 - 100 of 2219 matches
Sort by:
Items Per Page:  20 |  50  |  100
32" Swing 80" Centers Acra 3280SET ENGINE LATHE, 6"bore, A2-11 spindle nose
$RFQ
32" Swing 80" Centers Acra 3280SET ENGINE LATHE, 6"bore, A2-11 spindle nose
NEW ACRA MODEL: 3280SET PRECISION GAP BED ENGINE LATHE   Acra’s 3280SET Precision Gap Bed Engine Lathes are made in Taiwan and features the following: Headstock: • All gears and mandrel are made of a
16Ga Gauge 96" Length Roper-Whitney Connecticut 816 APRON BRAKE
$2,950
16Ga Gauge 96" Length Roper-Whitney Connecticut 816 APRON BRAKE
  8' X 16 GA. ROPER WHITNEY CONNECTICUT MANUAL APRON BRAKE MODEL 816     S/N         NEW   BENDING LENGTH ...................... 87" BENDIN
40" X Axis 22" Y Axis DMG-Mori DURAVERTICAL 1035 ECO VERTICAL MACHINING CENTER,
$49,500
40" X Axis 22" Y Axis DMG-Mori DURAVERTICAL 1035 ECO VERTICAL MACHINING CENTER,
DMG MORI VERTICAL MACHINING CENTER MODEL: DMC 1035 ECO,   NEW 2011   SPECIFICATIONS: X-AXIS TRAVEL ....................... 40.7" (1035mm) Y-AXIS TRAVEL ....................... 22" (560mm)
16" Cap 48" Width Roper-Whitney 34/18 BENDING ROLL
$4,950
16" Cap 48" Width Roper-Whitney 34/18 BENDING ROLL
  4' x 16 Ga. Roper Whitney Pexto Power Bending Roll Model 3418        S/N 716/3/01       NEW 2001     LENGTH OF ROLLS ...............
26" Swing 120" Centers Birmingham DL26120 ENGINE LATHE, Inch/Metric, gap, 3-Jaw,
$15,950
26" Swing 120" Centers Birmingham DL26120 ENGINE LATHE, Inch/Metric, gap, 3-Jaw,
26"/31.5" x 120" BIRMINGHAM GAP BED ENGINE LATHE MODEL: DL-26120L, S/N: DL-295, NEW: 2005   SPECIFICATIONS: SWING OVER BED ....................... 26" SWING OVER CROSS SLIDE ...............
30 Ton 30" Throat Strippit SUPER 3030 SINGLE STA. PUNCH PRESS
$6,950
30 Ton 30" Throat Strippit SUPER 3030 SINGLE STA. PUNCH PRESS
  30 TON STRIPPIT SEMI-AUTOMATIC FABRICATOR MODEL SUPER 30/30       S/N 153572877      NEW 1977   TONNAGE ................................... 30 TON
H. A. Jones P0W600 Stud Welder SPOT WELDER
$1,950
H. A. Jones P0W600 Stud Welder SPOT WELDER
  One pre-owned Solid State Stud Welder:   Manufacturer: : H.A. Jones Company, Dayton, OH.   Model : PW600.   Electrical Specs. : 115/1/60, 15 Amp.   Serial Number :  4093.  
6" Dia 16" Stroke Sunnen MBC-1805, NEW 1998, AUTO CYCLE, POWER STROKING, HONE, A
$RFQ
6" Dia 16" Stroke Sunnen MBC-1805, NEW 1998, AUTO CYCLE, POWER STROKING, HONE, A
SUNNEN HONE W/AUTO CYCLE, POWER STROKING & AUTO SIZING   MODEL: MBC-1805    S/N: 3V1-94307      NEW: 1998     I.D. RANGE: -FOR AUTOMATIC SIZING ...........
Gallmeyer Livingston 62, NEW 1986, POWER TABLE POWER WORKHEAD TOOL CUTTER GRINDER, BEAU
$RFQ
Gallmeyer Livingston 62, NEW 1986, POWER TABLE POWER WORKHEAD TOOL CUTTER GRINDER, BEAU
GALLMEYER & LIVINGSTON "GRAND RAPIDS" UNIVERSAL TOOL & CUTTER GRINDER   ***** MADE IN USA FOR THE US GOV'T *****   ** LONG TABLE WITH POWER FEED, 6" x 44" SIZE, 24" TRAVE
Mattison 42" DIAMETER, FROM A MODEL #24-42, NEW 1980 MAGNETIC CHUCK
$RFQ
Mattison 42" DIAMETER, FROM A MODEL #24-42, NEW 1980 MAGNETIC CHUCK
  42" DIAMETER MATTISON MAGNETIC CHUCK    FROM A MODEL #24-42 ROTARY SURFACE GRINDER, NEW 1980   ** IN STOCK, SHIPS FROM HARRISON, NJ ** ** CRATING IS $300 ADDITIONAL, OR LOADED FROM OU
4" Spindle 78" X Axis Toshiba-Shibaura BTD-11E R16 HORIZONTAL BORING MILL, Tosnu
$RFQ
4" Spindle 78" X Axis Toshiba-Shibaura BTD-11E R16 HORIZONTAL BORING MILL, Tosnu
4.3" TOSHIBA CNC TABLE HORIZONTAL BORING MILL MODEL: BTD-11E R16, YEAR: 1994   SPECIFICATIONS: SPINDLE DIAMETER .............. 4.3" 110 MM TAPER IN SPINDLE .............. #50 MILLING SPINDLE DIAMETER
Oliver "PT", POINT THINNER DRILL GRINDER
$RFQ
Oliver "PT", POINT THINNER DRILL GRINDER
  OLIVER DRILL POINT & WEB THINNING MACHINE   MODEL: PT     S/N: 1329       GENERAL SPECS: BASIC CAPACITY ...................... 5/16" TO 3" DIA.
24" Swing 16" Stroke Cincinnati-Heald 273A, AUTO FEEDS, RED HEAD SPINDLE, DRESSE
$RFQ
24" Swing 16" Stroke Cincinnati-Heald 273A, AUTO FEEDS, RED HEAD SPINDLE, DRESSE
  CINCINNATI MILACRON-HEALD "HIGH-PRECISION" UNIVERSAL INTERNAL GRINDING MACHINE W/EXTENDED BASE OPTION               *** THIS MACH
24" Chuck 20HP Spindle Arter H24, 1985, AUTO RAM TRAVEL UPFEED OF CHUCK ROTARY SURFA
$RFQ
24" Chuck 20HP Spindle Arter H24, 1985, AUTO RAM TRAVEL UPFEED OF CHUCK ROTARY SURFA
    Arter Model No. H-24 Horizontal Spindle Rotary Surface Grinder  With Automatic Power Ram Travel & Upfeed of the Table   Serial Number:  H24-4001     Built - 1
Deckel S11, NEW 1997, ACCESSOIRES, TOOL CUTTER GRINDER
$RFQ
Deckel S11, NEW 1997, ACCESSOIRES, TOOL CUTTER GRINDER
    DECKEL UNIVERSAL TOOL & CUTTER GRINDER  WITH MANY ACCESSORIES & CABINET SHOWN IN OUR PHOTOS   ** ADJUSTABLE THROUGH 360 DEG. IN 5 AXES **   TYPE: S11    &nbs
7" Dia. 49" Length Fischer ZSM 1250, SWISS MADE, NEW 1985 CENTER HOLE GRINDER, P
$RFQ
7" Dia. 49" Length Fischer ZSM 1250, SWISS MADE, NEW 1985 CENTER HOLE GRINDER, P
   FISCHER DOTTIKON "SWISS" CENTER HOLE GRINDER   MODEL:  ZSM 1250    S/N: 196     NEW: 1985   SPECIFICATIONS: Workpiece Capacity - As Currentl
10 Cu. Ft. Almco 0R-10, ROUND BOWL, 53" DIAMETER VIBRATORY FINISHER, TIMER, 220 VOLTS
$RFQ
10 Cu. Ft. Almco 0R-10, ROUND BOWL, 53" DIAMETER VIBRATORY FINISHER, TIMER, 220 VOLTS
                                    &nbs
5" Swing 12" Centers Myford MG12-HPM, NEW 2001, FULL AUTO CYCLE, OD GRINDER, HYD
$RFQ
5" Swing 12" Centers Myford MG12-HPM, NEW 2001, FULL AUTO CYCLE, OD GRINDER, HYD
  5" X 12" MYFORD HIGH-PRECISION   HYDRAULIC CYLINDRICAL GRINDER   ** SWING DOWN I.D. ATTACHMENT AVAILABLE **   MODEL: MG12-HPM     S/N: HPM-171120  
5 Cu. Ft. Almco 0R-5C, ROUND BOWL, CONTROL PANEL w/TIMER VIBRATORY FINISHER, SOUND ENCLOSU
$RFQ
5 Cu. Ft. Almco 0R-5C, ROUND BOWL, CONTROL PANEL w/TIMER VIBRATORY FINISHER, SOUND ENCLOSU
    5 Cu.Ft. ALMCO BOWL TYPE VIBRATORY FINISHER         MODEL: OR-5C    S/N: 089811     NEW: 1998       &nb
10" Width 20" Length Acer SUPRA 1020AHD, NEW 2001, PROG. AUTO IDF, 3X AUTO SURFA
$RFQ
10" Width 20" Length Acer SUPRA 1020AHD, NEW 2001, PROG. AUTO IDF, 3X AUTO SURFA
    10" X 20" ACER "HIGH-END" "SUPRA SERIES"     3-AXIS AUTOMATIC FEEDS SURFACE GRINDER WITH ELECTRONIC PROGRAMMABLE AUTOMATIC INCREMENTAL DOWNFEED
50" Table 3HP Spindle Acer 3VKH VERTICAL MILL, Vari-Speed Inverter, R-8, Newall DRO,
$6,450
50" Table 3HP Spindle Acer 3VKH VERTICAL MILL, Vari-Speed Inverter, R-8, Newall DRO,
ACER VERTICAL MILLING MACHINE,    MODEL: 3VKH, S/N: 9408584, NEW: 1994   SPECIFICATIONS: TABLE WORKING SURFACE ......... 10" X 50" NUMBER OF T-SLOTS ............. 3 RANGE:   &n
6" JAWS Kurt D688 MACHINE VISE
$399
6" JAWS Kurt D688 MACHINE VISE
6" KURT MILLING VISE MODEL: D688, S/N: D688-51301   SPECIFICATIONS: JAW WIDTH ......................... 6" JAW OPENING CAPACITY .............. 8.8" BED HEIGHT ........................ 2.875"
6" JAWS Kurt D688 MACHINE VISE
$RFQ
6" JAWS Kurt D688 MACHINE VISE
6" KURT MILLING VISE MODEL: D688, S/N: D688-45529   SPECIFICATIONS: JAW WIDTH ......................... 6" JAW OPENING CAPACITY .............. 8.8" BED HEIGHT ........................ 2.875"
Omniturn OT-CNC CNC LATHE, w/Lipe 125-SL Pneumatic Barfeed
$5,450
Omniturn OT-CNC CNC LATHE, w/Lipe 125-SL Pneumatic Barfeed
HARDINGE/OMNITURN GANG TOOL CNC LATHE w/LIPE BARFEED     TRAVEL IN X....................... 10"                  &nbs
LNS QUICKLOAD SERVO S3 BAR FEED
$RFQ
LNS QUICKLOAD SERVO S3 BAR FEED
LNS QUICKLOAD SERVO S3 MAGAZINE BARFEED New: 2005   SPECIFICATIONS: MINIMUM DIAMETER ROUND ............. 0.23" or 1/4" MAXIMUM DIAMETER ROUND ............. 4.7" MINIMUM BAR STOCK LENGTH ........
LNS Quickload 60 BAR FEED
$2,500
LNS Quickload 60 BAR FEED
LNS QUICKLOAD 60 MAGAZINE BAR FEED NEW: 1995   S/N: 19156-95   SPECIFICATIONS: Bar Diameter:                   
Thermco 8300 3121HNDANL1 MISCELLANEOUS
$3,950
Thermco 8300 3121HNDANL1 MISCELLANEOUS
THERMCO GAS MIXER MODEL: 8300HN10AN1100F2500, S/N: 33566, NEW: 2014   SPECIFICATIONS: RANGE .......................... 0-10% HYDROGEN IN NITROGEN CAPACITY ....................... 0-250 SCFH HYDROGEN INLET PRE
16" Width 32" Length Okamoto ACC-16-32EX, NEW 2000, E4X SERIES MDI CONTROL SURFA
$39,500
16" Width 32" Length Okamoto ACC-16-32EX, NEW 2000, E4X SERIES MDI CONTROL SURFA
  16" X 32" OKAMOTO "EXB" SERIES "HIGH-PRECISION" SURFACE GRINDER   *** OKAMOTO "EX SERIES" FANUC MDI/CNC CONTROL ***       S/N: 760001  &n
6" Width 18" Length Sharp SG-618, NEW 1995, SURFACE GRINDER
$RFQ
6" Width 18" Length Sharp SG-618, NEW 1995, SURFACE GRINDER
  6" X 18" SHARP INDUSTRIES "MADE IN TAIWAN"    MANUAL HAND FEED SURFACE GRINDER      MODEL: SG-618      S/N: 84A997   &
6" Wheel Baldor 500, 1 PH/115 VOLTS, PEDESTAL, CARBIDE GRINDER,
$RFQ
6" Wheel Baldor 500, 1 PH/115 VOLTS, PEDESTAL, CARBIDE GRINDER,
<div><strong>  BALDOR MODEL 500 CARBIDE GRINDER ON A PEDESTAL BASE</strong></div> <div> </div> <div><strong>6" WHEEL DIAMETER</strong></d
16Ga Thickness 24" Width Diacro 24-HFB FINGER (BOX PAN) BRAKE
$1,950
16Ga Thickness 24" Width Diacro 24-HFB FINGER (BOX PAN) BRAKE
  24" DIACRO 16 GAUGE FINGER BRAKE MODEL 24-HFB          S/N FL-1212      FORMING WIDTH .............................. 24" CAPACITY (MILD ST
250 Ton 16" Stroke Pressmaster HFP-250 H-FRAME HYDRAULIC PRESS
$26,500
250 Ton 16" Stroke Pressmaster HFP-250 H-FRAME HYDRAULIC PRESS
  250 TON PRESSMASTER H-FRAME PRESS MODEL 250H-E/H       S/N 0408204603       NEW 2008   RATED CAPACITY, TONNAGE........................... 250 S
DMG-Mori SPRINT32/5 CNC LATHE
$RFQ
DMG-Mori SPRINT32/5 CNC LATHE
DMG MORI SPRINT 32/5 SWISS TYPE CNC LATHE NEW: 2019   Video Link: https://youtu.be/pMBvnW3BOls SPECIFICATIONS: MAXIMUM BAR CAPACITY .............. 1.26" (32mm) MAIN SPINDLE SPEED ................ 8500 RP
3" Dia GMC PRB-75H NEW PIPE BENDERS, Power Ring Angle Roll Bender; 5.5 HP 220v, 3 ph
$RFQ
3" Dia GMC PRB-75H NEW PIPE BENDERS, Power Ring Angle Roll Bender; 5.5 HP 220v, 3 ph
NEW "GMC" POWER RING & ANGLE ROLL BENDER MODEL: PRB-75H   STANDARD FEATURES: ISO 9001 certified Hydraulic top roller positioning with digital readout Max capacity: 4” tube and 3-1/2”
6" Width 18" Length Harig 618EZ, PC CNC CONTROL, SURFACE GRINDER, CNC GRINDING O
$RFQ
6" Width 18" Length Harig 618EZ, PC CNC CONTROL, SURFACE GRINDER, CNC GRINDING O
   6" X 18" HARIG "E-Z SURF" CNC & MANUAL SURFACE GRINDER       MODEL: EZ-SURF     S/N: 197-EZ     NEW: 1998 &nb
27" X Axis 16" Y Axis SMEC PCV400 VERTICAL MACHINING CENTER, Fanuc Control, CT40
$39,500
27" X Axis 16" Y Axis SMEC PCV400 VERTICAL MACHINING CENTER, Fanuc Control, CT40
SMEC VERTICAL MACHINING CENTER MODEL: PCV400, S/N: 17C9K1057, NEW: 2017   SPECIFICATIONS: X-AXIS TRAVEL .......................... 27.5" - 700mm Y-AXIS TRAVEL .......................... 16.5" - 420mm
30" X Axis 16" Y Axis Fadal 2016L VERTICAL MACHINING CENTER, FADAL 88 Control, R
$RFQ
30" X Axis 16" Y Axis Fadal 2016L VERTICAL MACHINING CENTER, FADAL 88 Control, R
FADAL CNC VERTICAL MACHINING CENTER MODEL: 2016L,  S/N: 9910325,  YEAR: 1999   SPECIFICATIONS: X AXIS TRAVEL ............... 20" Y AXIS TRAVEL ............... 16" Z AXIS TRAVEL (EXTENDED) .
20" X Axis 16" Y Axis Fadal 2016L VERTICAL MACHINING CENTER, FADAL 88 Control, R
$RFQ
20" X Axis 16" Y Axis Fadal 2016L VERTICAL MACHINING CENTER, FADAL 88 Control, R
FADAL CNC VERTICAL MACHINING CENTER MODEL: 2016L,  S/N: 01200060921,  YEAR: 2000   SPECIFICATIONS: X AXIS TRAVEL ............... 20" Y AXIS TRAVEL ............... 16" Z AXIS TRAVEL (EXTENDE
52" Width Timesaver 52MWT-DDDD-75, NEW 2016, 4-HEADS, WET, BELT GRINDER, SS, LOCATED
$RFQ
52" Width Timesaver 52MWT-DDDD-75, NEW 2016, 4-HEADS, WET, BELT GRINDER, SS, LOCATED
52" TIMESAVERS "PUMA SERIES" "HIGH-PRODUCTIVITY" BELT GRINDER            MODEL: 52MWT-DDDD-75, S/N: 33203   ORIGINAL ACQUISITION COST OV
230 Ton 144" Bed Cincinnati 230AF10 PRESS BRAKE
$89,500
230 Ton 144" Bed Cincinnati 230AF10 PRESS BRAKE
  230 TON X 12' CINCINNATI "AUTOFORM" HYDRAULIC MULTI-AXIS CNC PRESS BRAKE MODEL 230AFx10        S/N 45464        NEW 1988   C
50" X AXIS 26" Y AXIS Haas VF-5D/40TR UNIV 5-AXIS, Haas 5-Axis Control, Trunnion
$RFQ
50" X AXIS 26" Y AXIS Haas VF-5D/40TR UNIV 5-AXIS, Haas 5-Axis Control, Trunnion
HAAS VERTICAL MACHINING CENTER MODEL VF-5D/40TR,  NEW: 2009   SPECIFICATIONS: TRAVELS X-AXIS ......................... 50" Y-AXIS ......................... 26" Z-AXIS .........................
50" X Axis 26" Y Axis Haas VF-5D/40TR VERTICAL MACHINING CENTER, Haas 5-Axis Con
$RFQ
50" X Axis 26" Y Axis Haas VF-5D/40TR VERTICAL MACHINING CENTER, Haas 5-Axis Con
HAAS VERTICAL MACHINING CENTER MODEL VF-5D/40TR,  NEW: 2009   SPECIFICATIONS: TRAVELS X-AXIS ......................... 50" Y-AXIS ......................... 26" Z-AXIS .........................
50" X Axis 20" Y Axis Haas VF-4 VERTICAL MACHINING CENTER, Haas control, CT40, 7
$19,500
50" X Axis 20" Y Axis Haas VF-4 VERTICAL MACHINING CENTER, Haas control, CT40, 7
HAAS VERTICAL MACHINING CENTER MODEL: VF4,  S/N: 9072,  MFG: 1996   SPECIFICATIONS: X-AXIS TRAVEL .................... 50"  1270mm Y-AXIS TRAVEL .................... 20"  508mm
Hardinge Conquest GT-SP CNC LATHE, Fanuc 18T
$RFQ
Hardinge Conquest GT-SP CNC LATHE, Fanuc 18T
HARDINGE "SUPER PRECISION" GANG TOOL CNC LATHE MODEL: CONQUEST GT-SP   NEW: 1996   Video Link: https://youtu.be/VzQXfzV1QIQ   SPECIFICATIONS: SPINDLE CONFIGURATION ................. A
6" Width 36 Hammond 600D, NEW 2000's, WITH BUILT-IN DUST COLLECTOR BELT GRINDER, PLAT
$RFQ
6" Width 36 Hammond 600D, NEW 2000's, WITH BUILT-IN DUST COLLECTOR BELT GRINDER, PLAT
  6" HAMMOND "DRY" PLATEN-TYPE BELT GRINDER   WITH BUILT-IN "DUSTKOP" DUST COLLECTOR   MODEL: 600D     S/N: 28568      NE
5" Y Axis 8" X Axis Hansvedt BENCHMAN, 1990, H-PUL;SE 201 POWER SUPPLY, 2X DRO R
$RFQ
5" Y Axis 8" X Axis Hansvedt BENCHMAN, 1990, H-PUL;SE 201 POWER SUPPLY, 2X DRO R
  HANSVEDT "BENCHMAN MODEL" RAM TYPE EDM   MODEL: MS-I BENCHMAN 201E      S/N: AN10143      NEW:1990   WORK TABLE SIZE .................
42" Table 2HP Spindle Bridgeport VERTICAL MILL, Rescraped Ways,
$11,950
42" Table 2HP Spindle Bridgeport VERTICAL MILL, Rescraped Ways,
BRIDGEPORT VERTICAL MILLING MACHINE MODEL:  SERIES I, S/N: 12/BR 233704 MACHINE FULLY RECONDITIONED IN 2022      SPECIFICATIONS: TABLE SIZE ........................ 9" X 42"   
24" X Axis 14" Y Axis Sharp SV-2414 A-F Mini Mill VERTICAL MACHINING CENTER, Fan
$RFQ
24" X Axis 14" Y Axis Sharp SV-2414 A-F Mini Mill VERTICAL MACHINING CENTER, Fan
NEW Sharp Model: SV-2414 A-F Mini Mill High Precision Box Way Vertical Machining Center      Standard Machine Specifications   Work Capacity X axis travel: 610mm  (24” ) Y axis tra
Mazak SQT-15 MarkII CNC LATHE, T-Plus
$RFQ
Mazak SQT-15 MarkII CNC LATHE, T-Plus
MAZAK SQT-15 MARK-II CNC TURNING CENTER NEW: 1995   EQUIPPED WITH:  - MAZATROL T-PLUS CNC CONTROL  - 8" 3-JAW HYD. CHUCK  - TOOLEYE  - 12 POSITION TURRET  - TAILSTOCK FOR MOR
0" Cap. 72" Width Cincinnati 1406-R SHEAR
$14,500
0" Cap. 72" Width Cincinnati 1406-R SHEAR
  6' x 3/16" Cincinnati Mechanical Shear Model 1406-R      S/N 36741      New 1967   Thickness .............................. 3/16" (.187")
Categories:
Condition:
  • X Used (2219)
Manufacturer:
Location:
  • X New Jersey (2219)
Price:
  •  to 
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>