16" X 32" OKAMOTO "EXB" SERIES "HIGH-PRECISION" SURFACE GRINDER
*** OKAMOTO "EX SERIES" FANUC MDI/CNC CONTROL ***
S/N: 760001 NEW: 2000
ACC-EX SERIES GRINDING CYCLES:
"FANUC" MDI/CNC CONTROL W/9" CRT DISPLAY
-2-AXIS CNC (Y/Z AXES)
-SIMPLE, QUICK TEACH SET-UP OF CYCLE FILLS IN
MOST REQUIRED DATA ..... SIMPLE TO LEARN & TO USE
-CAPACITY TO GRIND 3 SURFACES IN A SINGLE SET-UP
-SERVO DRIVEN BALLSCREWS ON BOTH DOWNFEED & CROSSFEED
FOR ULTIMATE ACCURACY
-FULLY AUTOMATIC GRIND CYCLE WITH ROUGH, FINE, SHIFT-PLUNGE,
& RAPID WHEELHEAD RETRACTION
-FULLY-AUTO OVER-THE-WHEEL DRESSER IS PROGRAMMABLE WITH
AUTO DRESS & WHEEL WEAR COMPENSATION, AND AIR-CUT ALLOWANCE
-INTERRUPT CYCLE AT ANY TIME TO DRESS, THEN RAPID BACK TO
WORK AFTER COMPENSATING
MODEL: ACC-1632EX S/N: 76001 NEW: 2000
NOMINAL GRINDING CAPACITY .................. 16" x 32"
MAXIMUM HEIGHT UNDER 12" WHEEL ............. 21.5"
TABLE SPEED, INFINITELY VARIABLE ........... 3' TO 82' FPM
LONGITUDINAL TABLE, HANDFEED PER REV. ...... 1.85"
MAX. LONGITUDINAL TABLE MOVEMENT, MANUAL ... 37.4"
AUTO CROSS FEED INCREMENT .................. 0.02" TO .80"
AUTO CONINOUS CROSSFEED .................... 0.010 TO 40' FPM
CROSSFEED, PER REV. (X1, X5, X20) .......... 0.01", .05" & .2"
GRAD. OF HANDWHEEL (x1, x5, x20) ......... 0.0001", .0005"& .002"
MAX. CROSSFEED, MANUAL ..................... 13.5"
AUTO INCREMENTAL DOWNFEED (10) ............. 0.00005" TO .0015"
SPARKOUT PASSES ............................ 0 TO 5
POWER RAPID WHEEL POSITIONING RATE ......... 40" IPM
MANUAL PULSE FEED (x.1, x1, x10) ........... 0.00001", .0001" & .001"
SPINDLE MOTOR .............................. 5 H.P.
WHEEL SIZE ................................. 12" X 1.5" X 5"
APPROX. DIMS. FOR OPERATION ................ 108" x 82"D x 95"H
APPROX. MACHINE WEIGHT ..................... 6,160 LBS.
MACHINE FEATURES:
"FANUC" MDI/CNC CONTROL W/9" CRT DISPLAY
-2-AXIS CNC (Y/Z AXES)
-SIMPLE, QUICK TEACH SET-UP OF CYCLE FILLS IN
MOST REQUIRED DATA ..... SIMPLE TO LEARN & TO USE
-CAPACITY TO GRIND 3 SURFACES IN A SINGLE SET-UP
-SERVO DRIVEN BALLSCREWS ON BOTH DOWNFEED & CROSSFEED
FOR ULTIMATE ACCURACY
-FULLY AUTOMATIC GRIND CYCLE WITH ROUGH, FINE, SHIFT-PLUNGE,
& RAPID WHEELHEAD RETRACTION
-FULLY-AUTO OVER-THE-WHEEL DRESSER IS PROGRAMMABLE WITH
AUTO DRESS & WHEEL WEAR COMPENSATION, AND AIR-CUT ALLOWANCE
-INTERRUPT CYCLE AT ANY TIME TO DRESS, THEN RAPID BACK TO
WORK AFTER COMPENSATING
EQUIPPED WITH:
16" X 32" O.S. WALKER "FINE-DIVISION" "LBP" ELECTRO-MAGNETIC CHUCK
VARIABLE HOLD NEUTROFIER CONTROL & DEMAGNETIZER
COOLANT SYSTEM W/PAPER SEPERATOR
5 H.P. SPINDLE MOTOR
PRESENTLY WIRED FOR 3/60/230-460 VOLTS
** INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE **
** EXCEPTIONAL CONDITION & APPEARANCE **
** QUIET SPINDLE, AXES MOVEMENTS, SMOOTH HYDRAULIC TABLE **
FOR MORE INFORMATION: Call Andy at 973-497-7600