buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Used > New Jersey

Used Machine Tools in New Jersey

2219 used machine tools items for sale in New Jersey
<Prev | 19 | 20 | 21 | 22 | 23
Refine: Viewing 1901 - 2000 of 2219 matches
Sort by:
Items Per Page:  20 |  50 |  100
50,000# AETNA STANDARD TRIPLE DRAW BENCH
$RFQ
50,000# AETNA STANDARD TRIPLE DRAW BENCH
50,000 Lbs. Aetna Standard Triple Draw Bench Tube range OD 2.750" - .960" Inlet stock length - 55' Outgoing stock length - 75' Mandrel Type - Roll Over Mandrel # of tubes - 1, 2 or 3 at a time
33,000# AETNA STANDARD DRAWBENCH
$RFQ
33,000# AETNA STANDARD DRAWBENCH
CAPACITY.................. 33,000 LBS. TYPE...................... DOUBLE CHAIN, CENTER DROP TRIPLE DRAW MADREL END MAIN DRIVE................ 180HP/750RPM DC BUMPER ARMS, RETURN CARRIAGE CATCH TABLE FOR COMPLE
22000 LB., AETNA STANDARD DRAWBENCH
$RFQ
22000 LB., AETNA STANDARD DRAWBENCH
CAPACITY.................. 22,000 LBS. TYPE...................... DOUBLE CHAIN, CENTER DROP TRIPLE DRAW MAIN DRIVE................ 100HP/750RPM DC BUMPER ARMS, RETURN CARRIAGE. WITH ROTATING MANDREL TYPE LOAD T
FENN #4P TURKS HEAD
$RFQ
FENN #4P TURKS HEAD
MANUFACTURER: FENN MODEL: 4-P TYPR: PLAIN TYPE TURKS HEAD DESIGNED FOR PRODUCING SHAPES. STANDARD SPEED TYPE CAPACITY: APPROX. .250 (6
2000mm X 20mm VIGANO CUT TO LENGTH LINE
$RFQ
2000mm X 20mm VIGANO CUT TO LENGTH LINE
Features of the material at entry Material Steel coil (pickling, hot covered, black) Tensile strength Thickness 20 mm max 500 N/mm2 - max width 1500 mm Thickness 15 mm max 550 N/mm2 - max width 2000 mm Th
72" x .105" x 60K Denro Trapazoid CTL Line
$RFQ
72" x .105" x 60K Denro Trapazoid CTL Line
MANUFACTURER - NIPPON/DENRO YEAR - 1989 MATERIAL - CR, ELECTRO GALV, HOT DIP GALV, P&O CUTS - SQUARE, RECTANGLE, PARALLELOGRAM, TRAPEZOID SHEETS MATERIAL THICKNESS - .015"-.102" (.4MM-2.6MM) COIL WIDTH - 2
60" X .125" X 20,000# RED BUD CUT TO LENGTH LINE
$RFQ
60" X .125" X 20,000# RED BUD CUT TO LENGTH LINE
60" x .125" x 23,000 # Red Bud Industries CTL Year - 1995 Line Direction - Right to Left General Line Specifications: Length Accuracy +/- .005 (.127mm) Material Thickness .02
42" X .075 X 7,000# DALLAS CUT-TO-LENGTH LINE
$RFQ
42" X .075 X 7,000# DALLAS CUT-TO-LENGTH LINE
1 - DALLAS #06370 PAYOFF REEL, 7000# x 42" CAPACITY, 60" O.D. Motor and Controls; S/N 13377 1 - DALLAS #83563 SEVEN-ROLL FLATTENER, 42" x .075" CAPACITY WITH INBOUND & OUTBOUND FEED ROLLSls, S/N
DAHLSTROM MODEL# 35TP CUTOFF PRESS
$RFQ
DAHLSTROM MODEL# 35TP CUTOFF PRESS
DIE ACCELARATOR UNICO MODEL # SP-1192 MAX LENGRH 35' MIN LENGTH 3' MAX SPEED 150 FPM FLYING CUT OFF MODEL #35TP DIE AREA 48" TONNAGE 35 TOOLED FOR AG/RIB PANLE 10 HP CONDITION VERY GOOD
25 TON YODER MODEL #P25 CUTOFF MACHINE
$RFQ
25 TON YODER MODEL #P25 CUTOFF MACHINE
GENERAL SPECIFICATIONS: CUTTING CAPACITY, MAXIMUM SECTION AREA, MILD STEEL, DOUBLE SHEAR DIE (DEPENDENT UPON SHAPE OF SECTION) ............... 0.25" SQ. MAXIMUM TUBE SIZE (O.D. x THICKNESS) ............... 1-
BARDONS & OLIVER #33 AUTOMATIC CUTOFF MACHINE
$RFQ
BARDONS & OLIVER #33 AUTOMATIC CUTOFF MACHINE
CAPACITY ............................... 3" CUT RUNOUT ............................. 48" STOCK TABLE ............................ 10' ROLLER FEED SPINDLE SPEEDS ......................... (52) 85 TO 1100 RPM
HAVEN #802 DOUBLE TUBE CUT-OFF MACHINE
$RFQ
HAVEN #802 DOUBLE TUBE CUT-OFF MACHINE
N E W 1 9 8 5 THIS MACHINE CUTS TWO TUBES AT ONCE, DIMPLE FREE BY THE DUAL BLADE CUTTING MACHINE RATED CAPACITY .................. 1/8" TO 3/8" DIAMETER RECOMMENDED FOR ................. .049"
HAVEN #802 DOUBLE TUBE CUT-OFF
$RFQ
HAVEN #802 DOUBLE TUBE CUT-OFF
N E W 1 9 8 5 THIS MACHINE CUTS "TWO" TUBES AT ONCE, DIMPLE FREE BY THE DUAL BLADE CUTTING METHOD RATED CAPACITY ..................... 1/8" TO 3/8" DIAMETER WALL THISKNESS ..................
RUESCH TRAVERSE WELDING WIND LINE
$RFQ
RUESCH TRAVERSE WELDING WIND LINE
RUESCH 2-ARM TURNSTILE w/POWER ROTATION CAPACITY : 4000 LBS./ARM SPOOL O.D. MAX: 44" SPOOL I.D. : 5" SPOOL WIDTH : 16-1/2" DRIVEN PAYOFF "EYE TO SKY" COILS COIL O.D.
CUSTOM MFG. COIL TRANSFER MACHINE
$RFQ
CUSTOM MFG. COIL TRANSFER MACHINE
Coil Hook Remover-Up Ender (3) Hooks Basket Loader Hydraulic System 20 HP Motor Basket Roller Conveyor *ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER* PRICE NET ON LOCATION
20,000# X 30" LITTELL FEED LINE
$RFQ
20,000# X 30" LITTELL FEED LINE
30" Littell Servo Feed and 20,000# Payoff Reel With Coil Car and Threading Table 20,000# Littell Uncoiler with Coil Car Model S200-36, S/N 92185-95-3 ID Range 20-24", Max. OD 60", Max Width 30"
10,000# X 32" LITTELL No. 90-36 PRESS FEED LINE
$RFQ
10,000# X 32" LITTELL No. 90-36 PRESS FEED LINE
32" Press Feed Line; including: Seating; Littell Model 90-36 10;000 Lb. Capacity Uncoiler; S/N 84046-78; Maximum Coil Size 36" Width; 72" OD; 20-24" ID; Hydraulic Mandrel Expansion; Traversin
10,000# x 24" Automatic Feed Co./Sesco Press Feed Line
$RFQ
10,000# x 24" Automatic Feed Co./Sesco Press Feed Line
N E W 1 9 7 5 COIL CRADLE/STRAIGHTENER: SERIAL NO. ........................ 81208-75-2 CAPACITY .......................... 10,000 LBS. STROKE CAPACITY ................... .060" - .079" THICK @ 24"
BUTT SHEAR / SEAM WELDER MODEL LSW-2500
$RFQ
BUTT SHEAR / SEAM WELDER MODEL LSW-2500
ENTRY EDGE GUIDES POWERED PINCH ROLLS 5 ROLL POWERED FLATTENER ENTRY & EXIT CLAMPING UNITS SHEAR EXIT PINCH ROLL PUSH BUTTON STATION CAPACITY: STRIP THICKNESS ............... 1.1mm - 3.8mm STRIP WIDTH ........
10" x .125" IRON BAY, MODEL #MP-22 COIL END JOINER
$RFQ
10" x .125" IRON BAY, MODEL #MP-22 COIL END JOINER
CAPACITY: 10" WIDE x .125" THICK (SHEAR ON PORTABLE CART CAPACITY) EQUIPPED WITH: - TORCH TRAVEL VIA ELECTRIC MOTOR - TIGTORCH CONTROLS - GAS PRESSURE GAUGES - MANUAL CLAMPING - AIR OPERATED WITH
REGAL #3277-CC-CSF-48 COMBINATION COIL CRADLE & STRAIGHTENER
$RFQ
REGAL #3277-CC-CSF-48 COMBINATION COIL CRADLE & STRAIGHTENER
Capacity 10,000 Lbs. Coil 48" Coil Width 60" Coil OD Max. Stock Thickness .060" O.A. Dimensions 144" lr x 89" f-b Weight 6,350 lbs. Variable Production Speed to 80 FPM Power Adjustment of
LITTELL #G680-40 COMBINATION COIL CRADLE & STRAIGHTENER
$RFQ
LITTELL #G680-40 COMBINATION COIL CRADLE & STRAIGHTENER
N E W 1 9 5 1 CAPACITY (LBS) .................................. 8000 WILL HOLD COILS: (MAXIMUM OUTSIDE DIAMETER) ..... 48" (MAXIMUM WIDTH) ................ 40" STRAIGHTENED STOCK .......................
LITTELL MODEL #C-60 COIL CRADLE AND STRAIGHTENER
$RFQ
LITTELL MODEL #C-60 COIL CRADLE AND STRAIGHTENER
CRADLE: CAPACITY ............................ 6000# MAXIMUM WIDTH (2 ROLLS) ............. 15" .187" x 14" WIDE STRAIGHTENER: ROLLS ............................... 2 OVER 3 MAXIMUM WIDTH OF ROLL
LITTELL MODEL #620D-SPD-HVS COIL CRADLE & STRAIGHTENER
$RFQ
LITTELL MODEL #620D-SPD-HVS COIL CRADLE & STRAIGHTENER
CRADLE: CAPACITY .............................. 6000# MAXIMUM COIL DIAMETER ................. 52" MAXIMUM COIL WIDTH .................... 20" STRAIGHTENER: TWO ENTRY ROLLS, TWO STRAIGHTENING ROLLS OV
2500# PERFECTO MODEL 54-10CC COIL CRADLE
$RFQ
2500# PERFECTO MODEL 54-10CC COIL CRADLE
WIDTH ................................ 10" APPROX. COIL ......................... 2500#
1200# ROWE MODEL # 810-PR MOTORIZED COIL CRADLE
$RFQ
1200# ROWE MODEL # 810-PR MOTORIZED COIL CRADLE
* * * N E W 1 9 6 9 * * * Coil Capacity ....................... 1200 Lbs. Maximum Coil Width .................. 10" Maximum Coil O. D. .................. 36" Weight .............................. 500
72" x 10,000# PAXSON BANDING LINE
$RFQ
72" x 10,000# PAXSON BANDING LINE
SPECIFICATIONS: 72" x 10,000# DOWNLAYER RIGHT ANGLE DISCHARGE 80" ROLL FACE COMPLETE WITH: 12' POWERED CONVEYOR SIGNODE BANDING HEAD TABLE 3 CONICAL ROLLS 20' EXIT CONVEYOR WITH CUT-OUT FOR COIL I
51.25" (1302mm) FATA HUNTER COIL COATING LINE, NEW 2002
$RFQ
51.25" (1302mm) FATA HUNTER COIL COATING LINE, NEW 2002
Manufacturer - Fata Hunter Year - 2002 Status - Installed in USA Product - Single Coat Roof Deck Coils Line Direction - Right to Left General Description Line Speed - 200 FPM (61m/min) Width Range - 24" -
ALUMINUM BILLET CASTING FOUNDRY
$RFQ
ALUMINUM BILLET CASTING FOUNDRY
6 TON ALUMINIUM MELTING FURNACE: DUAL (GAS OR OIL FIRED) CASTING SYSTEM:TABLE: 4 TON CASTING CAPACITY PER DROP 28 MOULDS 5 1/4"DIAMETER OVER TABLE PISTON FOR CASTING VELOCITY AND EXTRACTING BILLETS HYDRAULIC
Rautomead RT 650 Billet/Flat Bar Casting System (2 Casters Available)
$RFQ
Rautomead RT 650 Billet/Flat Bar Casting System (2 Casters Available)
Model - RT 650 Crucible Capacity - 650 Kg Power - 105 Melting Rate Brass - 200 Kg per hour Rounds Min Diameter - 16mm (.630") Rounds Max Diameter - 125mm (4.92") Flats Max Width - 350mm (13.78") H
SOUTHWIRE CONTINUOUS VERTICAL CASTING LINE
$RFQ
SOUTHWIRE CONTINUOUS VERTICAL CASTING LINE
13" DIAMETER x 25" L BILLET SIZE INCLUDING: (1) SHAFT FURNACE, GAS FIRED, 2150 F DEGREES MAX. TEMPERATURE, 8000000BTU PER HOUR, CONVEYOR FEED, SCRAP BUCKET TYPE (1) LAUNDER LIQUID METAL FEED (1) HOLDIN
LOMA Continuous Vertical Billet Casting Line
$RFQ
LOMA Continuous Vertical Billet Casting Line
10" Dia. x 20 3/8" L Billet Size Including: ASARCO Shaft Furnace AJAX Holding Furnaces, (2) HILL-LOMA Continuous Caster, s/n 9788, Wagner Billet Saw, 44" Dia. Blade, Conveyor Unload, s/n 359
WILLIAMS & WHITE #24 DOUBLE GEARED MECHANICAL BULLDOZER
$RFQ
WILLIAMS & WHITE #24 DOUBLE GEARED MECHANICAL BULLDOZER
RATED CAPACITY (TONS) ............... 80 STROKE .............................. 18" CROSS HEAD: (WIDE x HIGH) ........... 53" x 10" WIDTH ACROSS WAYS ................... 34" MAXIMUM DISTANCE TO LUG
WILLIAMS & WHITE MECHANICAL BULLDOZER
$RFQ
WILLIAMS & WHITE MECHANICAL BULLDOZER
CAPACITY 80 TONS STROKE 18" SIZE OF CROSS HEAD - 53" Wide x 9-1/2" High (2) T-SLOTS ON 4" CENTERS WIDTH OF BED WAYS 34-1/2" DIE SPACE WITH RAM PULLED BACK - 57" EQUIPPED WITH: AIR
16ga X 3' DIACRO MODEL #16-36, PRESS BRAKE
$RFQ
16ga X 3' DIACRO MODEL #16-36, PRESS BRAKE
SPECIFICATIONS: LENGTH BED & RAM ................. 36" MANUAL BACK GAUGE ................ 24" DISTANCE BETWEEN HOUSINGS ........ 25" EQUIPPED WITH: DIE CLAMP ON RAM DIE SLOT IN BED PUSH BUTTON
16 Ga. x 35 TON DREIS & KRUMP MODEL #338 PRESS BRAKE
$RFQ
16 Ga. x 35 TON DREIS & KRUMP MODEL #338 PRESS BRAKE
Rated capacity (tons)................... 35 Gauge................................... 16 Bed area................................ 8' x 2-3/4" Overall length of bed and ram........... 8' Shutheight................
260 TON NIAGARA MODEL #N-260-8-12 PRESS BRAKE
$RFQ
260 TON NIAGARA MODEL #N-260-8-12 PRESS BRAKE
RATED CAPACITY ......................... 260 Tons STROKE ................................. 4" MAXIMUM ADJUSTMENT ..................... 6" DEPTH OF THROAT RAM CENTER TO FRAME .... 12" RAM ..............
150 TON CHICAGO MODEL #1012-R PRESS BRAKE
$RFQ
150 TON CHICAGO MODEL #1012-R PRESS BRAKE
CAPACITY ................. 150 TON CAPACITY ................. 12' x 3/16" STROKE ................... 3" RAM ADJUSTMENT ........... 5" RAM + BED ................ 144" L STROKES PER MINUTE .......
90 TON CINCINNATI MODEL #50-4 POWER PRESS BRAKE
$RFQ
90 TON CINCINNATI MODEL #50-4 POWER PRESS BRAKE
O.A. BENDING LENGTH BED & RAM .................. 6' DISTANCE BET. HOUSINGS ......................... 4'6" STROKE ......................................... 3" SHUTHEIGHT .....................................
75 TON DREIS & KRUMP MODEL #68C PRESS BRAKE
$RFQ
75 TON DREIS & KRUMP MODEL #68C PRESS BRAKE
Rated capacity (mid-stroke) ......... 50 (bottom-stroke) ...... 75 Width between uprights .............. 68" Bed ................................. 8' Die Clamp Holder .................... 24" O.A. Dimensio
60 TON NIAGARA MODEL #IB-60-8-10 PRESS BRAKE
$RFQ
60 TON NIAGARA MODEL #IB-60-8-10 PRESS BRAKE
RATED CAPACITY ......................... 60 TONS STROKE ................................. 3" SHUTHEIGHT ............................. 12" ADJUSTMENT ............................. 5" DISTANCE BETWEEN HO
14 GA x 6' 25 TON NIAGARA MODEL #IB-25-6-6 ALL STEEL POWER PRESS BRAKE
$RFQ
14 GA x 6' 25 TON NIAGARA MODEL #IB-25-6-6 ALL STEEL POWER PRESS BRAKE
RATED CAPACITY (TONS)................... 25 DISTANCE BETWEEN HOUSINGS............... 5' OVERALL LENGTH OF BED................... 6' BENDING CAPACITY........................ 6' X 14 GAUGE STROKE.......................
CHICAGO D&K MODEL #135 PRESS BRAKE
$RFQ
CHICAGO D&K MODEL #135 PRESS BRAKE
MAXIMUM CAPACITY .............. 3/16" MINI FLANGE ................... 1-1/4" THROAT ........................ 6" WIDTH BETWEEN HOUSINGS ........ 30-1/2" RAM AND BED ................... 4' EQUIPP
CHICAGO (D & K) MODEL #4L6 PRESS BRAKE
$RFQ
CHICAGO (D & K) MODEL #4L6 PRESS BRAKE
BED AND RAM .................... 72" THROAT ......................... 8" WIDTH BETWEEN UPRIGHTS ......... 54" MAXIMUM CAPACITY BACK GAUGE .... 24" DIE HOLDERS .................... 3 EQUIPPED WI
385 Ton x 20' Novastilmec SHP 350/60 4-Axis CNC Press Brake
$RFQ
385 Ton x 20' Novastilmec SHP 350/60 4-Axis CNC Press Brake
385 Ton x 20' Novastilmec SHP 350/60 4-Axis CNC Press Brake Specifications: Tonnage Capacity 385 Tons Bed Length 20' Distance Between Housings 18'2" Throat Depth 14"
110 TON LVD MODEL #110JS10MNC HYDRAULIC PRESS BRAKE
$RFQ
110 TON LVD MODEL #110JS10MNC HYDRAULIC PRESS BRAKE
YEAR: 1986 RATED CAPACITY ........................... 110 TON x 10' STROKE ................................... 5" WIDTH BETWEEN HOUSING .................... 100" THROAT ..................................
110 TON LVD MODEL #110JS10 HYDRAULIC PRESS BRAKE
$RFQ
110 TON LVD MODEL #110JS10 HYDRAULIC PRESS BRAKE
YEAR: 1988 TONANGE ADJUSTMENT .................... 110 TON x 10' STROKE................................. 5" THROAT ................................ 8" BENDING CAPACITY MILD STEEL ........... 10' x 10GA
75 TON x 8' PROMECAM MODEL #RG-75-25 HYDRAULIC POWER PRESS BRAKE
$RFQ
75 TON x 8' PROMECAM MODEL #RG-75-25 HYDRAULIC POWER PRESS BRAKE
CAPACITY, TONNAGE .................... 75 CAPACITY, BENDING..................... 8' OVERALL BED AND RAM .................. 99" THROAT DEPTH ......................... 15-7/8" WIDTH BETWEEN UPRIGHTS .......
75 TON DIACRO MODEL #75-10 HYDRA-MECHANIC PRESS BRAKE
$RFQ
75 TON DIACRO MODEL #75-10 HYDRA-MECHANIC PRESS BRAKE
CAPACITY ............................. 75 TON STANDARD BED & RAM ................... 10' THROAT ............................... 8" CAPACITY (MILD STEEL) ................ 120" X 12 GA DISTANCE BETWEEN HOUSIN
400 TON WARCO PRESS LINE, BED SIZE 72" x 96"
$RFQ
400 TON WARCO PRESS LINE, BED SIZE 72" x 96"
SPECIFICATIONS: BED SIZE ................ 72" x 96" STROKE .................. 18" SHUT HEIGHT ............. 50" ADJUSTMENT .............. 10" STROKES PER MINUTE ...... UP TO 30 MAX COIL W
500 TON, VERSON PRESS LINE, BED SIZE 108" x 186"
$RFQ
500 TON, VERSON PRESS LINE, BED SIZE 108" x 186"
SPECIFICATIONS: BED SIZE ................ 102" x 186" STROKE .................. 12" SHUT HEIGHT ............. 75" ADJUSTMENT .............. 20" STROKES PER MINUTE ...... 10 to 50 MAX COIL
400 TON, VERSON PRESS LINE, BED 102" x 186"
$RFQ
400 TON, VERSON PRESS LINE, BED 102" x 186"
SPECIFICATIONS: BED SIZE ................ 102" x 186" STROKE .................. 12" SHUT HEIGHT ............. 72" ADJUSTMENT .............. 20" STROKES PER MINUTE ...... 10 to 50 MAX COIL
1" X .065" PINES MODEL #M-04523 BENDER
$RFQ
1" X .065" PINES MODEL #M-04523 BENDER
TUBE SIZE RANGE OD ...................... UP TO 1" MAXIMUM CAPACITY STEEL TUBING ........... 1" OD x .065" WALL MAXIMUM BEND ANGLE - NORMAL TOOLING .... 140 MAXIMUM BEND ANGLE - SPECIAL TOOLING .... 16
2-1/4" x .065" PINES MODEL #25T VERTICAL TUBE BENDER
$RFQ
2-1/4" x .065" PINES MODEL #25T VERTICAL TUBE BENDER
ROUND TUBING CAPACITY: NON-FERROUS .............................. 2-1/4" x .125" MILD STEEL ............................... 2-1/4" x .065" STAINLESS ................................ 2" x .058&
ARVIN 2" ROUND BAR BENDER
$RFQ
ARVIN 2" ROUND BAR BENDER
CAPACITY ....................... 2" ROUND BAR O.A. DIM. ...................... 68" X 50" X 44" WEIGHT ......................... 4,685 LBS. EQUIPPED WITH: MOUNTED START/STOP BUTTONS 2 pins
1-1/2" x .072" PINES MODEL #5T VERTICAL TUBE BENDER
$RFQ
1-1/2" x .072" PINES MODEL #5T VERTICAL TUBE BENDER
Dial-A-Bend Up to 1-1/2" Diameter 1" Tooling 20 HP, 230/460 Volt, 3/60/1750 RPM Pedestal Control
CUSTOM HAND SHEET BENDER
$RFQ
CUSTOM HAND SHEET BENDER
GOOD CONDITION
WALTER P. HILL (DETROIT) HAIRPIN TUBE BENDER
$RFQ
WALTER P. HILL (DETROIT) HAIRPIN TUBE BENDER
Tube Capacity ................. 5/8" to 1-1/2" O.D. Radius Range .................. 3/4" - 24" Modified to 42" Maximum Bending Torque ................ Up to 50,000 Inch Pounds Hydraulic Pump .
COMPLETE BAR PROCESSING PLANT WITH SCHUMAG TYPE COMBINE DRAWING MACHINES
$RFQ
COMPLETE BAR PROCESSING PLANT WITH SCHUMAG TYPE COMBINE DRAWING MACHINES
Line No. 1 Draw sections: 7mm thru 14 mm Round Length of the bars: Between 3 and 6 meters Max. drawing speed: 60m/min. Operating Voltage: 220 volts. Main Motor: 158 kW DC Components: Horizontal pre- straig
SCHUMAG KZRP-1S COMBINED DRAWING LINE
$RFQ
SCHUMAG KZRP-1S COMBINED DRAWING LINE
Continuous wire drawing/straightening/finishing/cut off machine Manufacturer - Schumag S/N - 6549 Year - 1965 Wire Diameter Capacity - .158"-.767" Speed - 60 meters/minute Line Components: Pallet
WARNER & SWASEY MODEL #2AB AUTOMATIC BAR MACHINE
$RFQ
WARNER & SWASEY MODEL #2AB AUTOMATIC BAR MACHINE
SPECIFICATIONS: - SPINDLE SPEEDS: 28 TO 1544 RPM - TURRET FEEDS: .0019" TO .124" IPR - CUTOFF SLIDE FEEDS: .0015" TO .020" IPR - CAPACITY: 3" ROUND BAR - BAR FEED STROKE: 1/8" TO 10&#
WARNER & SWASEY MODEL #1AB AUTOMATIC BAR MACHINE
$RFQ
WARNER & SWASEY MODEL #1AB AUTOMATIC BAR MACHINE
SPECIFICATIONS: - SPINDLE SPEEDS: 72 TO 2026 RPM - TURRET FEEDS: .0019" TO .124" IPR - CUTOFF SLIDE FEEDS: .0005" TO .021" IPR - CAPACITY: 2" ROUND BAR, 1-3/8" SQUARE, 1-3/4" HEXA
OCAP #303R, BLIND RIVET ASSEMBLY MACHINE, DIA. 2.mm-7.8mm MAX
$RFQ
OCAP #303R, BLIND RIVET ASSEMBLY MACHINE, DIA. 2.mm-7.8mm MAX
SPECIFICATIONS: RIVET DIAMETER .................. 2.4mm - 7.8mm MAX RIVET LENGTH .................... 4mm - 50mm MAX. NAIL LENGTH ..................... 35mm - 85mm MAX PRODUCTION RATE ................. 0-500 PIECES
OCAP #303R, BLIND RIVET ASSEMBLY MACHINE, DIA. 2.mm-7.8mm MAX
$RFQ
OCAP #303R, BLIND RIVET ASSEMBLY MACHINE, DIA. 2.mm-7.8mm MAX
SPECIFICATIONS: RIVET DIAMETER .................. 2.4mm - 7.8mm MAX RIVET LENGTH .................... 4mm - 50mm MAX. NAIL LENGTH ..................... 35mm - 85mm MAX PRODUCTION RATE ................. 0-500 PIECES
OCAP #303R, BLIND RIVET ASSEMBLY MACHINE, DIA. 2.mm-7.8mm MAX
$RFQ
OCAP #303R, BLIND RIVET ASSEMBLY MACHINE, DIA. 2.mm-7.8mm MAX
SPECIFICATIONS: RIVET DIAMETER .................. 2.4mm - 7.8mm MAX RIVET LENGTH .................... 4mm - 50mm MAX. NAIL LENGTH ..................... 35mm - 85mm MAX PRODUCTION RATE ................. 0-500 PIECES
OCAP #303R, BLIND RIVET ASSEMBLY MACHINE, DIA. 2.mm-7.8mm MAX
$RFQ
OCAP #303R, BLIND RIVET ASSEMBLY MACHINE, DIA. 2.mm-7.8mm MAX
SPECIFICATIONS: RIVET DIAMETER .................. 2.4mm - 7.8mm MAX RIVET LENGTH .................... 4mm - 50mm MAX. NAIL LENGTH ..................... 35mm - 85mm MAX PRODUCTION RATE ................. 0-500 PIECES
OCAP #203R, BLIND RIVET ASSEMBLY MACHINE. DIA. 2.4mm - 7.8mm MAX
$RFQ
OCAP #203R, BLIND RIVET ASSEMBLY MACHINE. DIA. 2.4mm - 7.8mm MAX
SPECIFICATIONS: RIVET DIAMETER .................. 2.4mm - 7.8mm MAX RIVET LENGTH .................... 4mm - 50mm MAX. NAIL LENGTH ..................... 35mm - 85mm MAX PRODUCTION RATE ................. 120-280 PIEC
OCAP #203R, BLIND RIVET ASSEMBLY MACHINE. DIA. 2.4mm - 7.8mm MAX
$RFQ
OCAP #203R, BLIND RIVET ASSEMBLY MACHINE. DIA. 2.4mm - 7.8mm MAX
SPECIFICATIONS: RIVET DIAMETER .................. 2.4mm - 7.8mm MAX RIVET LENGTH .................... 4mm - 50mm MAX. NAIL LENGTH ..................... 35mm - 85mm MAX PRODUCTION RATE ................. 120-280 PIEC
OCAP #203R, BLIND RIVET ASSEMBLY MACHINE. DIA. 2.4mm - 7.8mm MAX
$RFQ
OCAP #203R, BLIND RIVET ASSEMBLY MACHINE. DIA. 2.4mm - 7.8mm MAX
SPECIFICATIONS: RIVET DIAMETER .................. 2.4mm - 7.8mm MAX RIVET LENGTH .................... 4mm - 50mm MAX. NAIL LENGTH ..................... 35mm - 85mm MAX PRODUCTION RATE ................. 120-280 PIEC
OCAP #203R, BLIND RIVET ASSEMBLY MACHINE. DIA. 2.4mm - 7.8mm MAX
$RFQ
OCAP #203R, BLIND RIVET ASSEMBLY MACHINE. DIA. 2.4mm - 7.8mm MAX
SPECIFICATIONS: RIVET DIAMETER .................. 2.4mm - 7.8mm MAX RIVET LENGTH .................... 4mm - 50mm MAX. NAIL LENGTH ..................... 35mm - 85mm MAX PRODUCTION RATE ................. 120-280 PIEC
INDUCTION ANNEALER AND CBC
$RFQ
INDUCTION ANNEALER AND CBC
FT / MIN ........................ 700 REQUIRES ........................ 2scf/min N2 @ 2MM H2O Includes: The heat zone, with complete electrics; the dwell zone; the cooling zone, with recirculating cooling water tank
AJAX INDUCTION ANNEALER AND CBC
$RFQ
AJAX INDUCTION ANNEALER AND CBC
FT / MIN ........................ 700 REQUIRES ........................ 2scf/min N2 @ 2MM H2O Includes: The heat zone, with complete electrics; the dwell zone; the cooling zone, with recirculating cooling water ta
0" Cap. 120" Width Birmingham H-1045-C NEW SHEAR, 7 Ga x 10' Hydraulic; Made in
$RFQ
0" Cap. 120" Width Birmingham H-1045-C NEW SHEAR, 7 Ga x 10' Hydraulic; Made in
NEW BIRMINGHAM 10' x 7 Ga. HEAVY DUTY HYDRAULIC SHEAR MODEL: H-1045-C          MADE IN CHINA       SPECIFICATIONS: Cutting Capacity: Width: 10' Thickne
0" Cap. 96" Width Birmingham H-0845-C NEW SHEAR, 7 Ga x 8' Hydraulic; Made in Ch
$RFQ
0" Cap. 96" Width Birmingham H-0845-C NEW SHEAR, 7 Ga x 8' Hydraulic; Made in Ch
NEW BIRMINGHAM 8' x 7 Ga. HEAVY DUTY HYDRAULIC SHEAR MODEL: H-0845-C          MADE IN CHINA       SPECIFICATIONS: Cutting Capacity: Width: 8' Thickness
120" Width Birmingham H-1035-C NEW SHEAR, 8 Ga x 10' Hydraulic; Made in China
$RFQ
120" Width Birmingham H-1035-C NEW SHEAR, 8 Ga x 10' Hydraulic; Made in China
NEW BIRMINGHAM 10' x 8 Ga. HEAVY DUTY HYDRAULIC SHEAR MODEL: H-1035-C          MADE IN CHINA       SSPECIFICATIONS: Shearing Width: 10' Shearing Thicknes
96" Width Birmingham H-0835-C NEW SHEAR, 8 Ga x 8' Hydraulic; Made in China
$RFQ
96" Width Birmingham H-0835-C NEW SHEAR, 8 Ga x 8' Hydraulic; Made in China
NEW BIRMINGHAM 8' x 8 Ga. HEAVY DUTY HYDRAULIC SHEAR MODEL: H-0835-C          MADE IN CHINA       SPECIFICATIONS: Shearing Width: 8' Sheraring Thickness:
0" Cap. 72" Width Birmingham H-0665-C NEW SHEAR, 1/4" x 6' Hydraulic; Made
$RFQ
0" Cap. 72" Width Birmingham H-0665-C NEW SHEAR, 1/4" x 6' Hydraulic; Made
NEW BIRMINGHAM 6' x 1/4" HEAVY DUTY HYDRAULIC SHEAR MODEL: H-0665-C          MADE IN CHINA       SPECIFICATIONS: Capacity: 6' x 1/4" Shear angl
0" Cap. 72" Width Birmingham H-0645-C NEW SHEAR, 7 Ga x 6' Hydraulic; Made in Ch
$RFQ
0" Cap. 72" Width Birmingham H-0645-C NEW SHEAR, 7 Ga x 6' Hydraulic; Made in Ch
NEW BIRMINGHAM 6' x 7 Ga. HEAVY DUTY HYDRAULIC SHEAR MODEL: H-0645-C          MADE IN CHINA       SPECIFICATIONS: Cutting Capacity: Width: 6' Thickness
72" Width Birmingham H-0635-C NEW SHEAR, 8 GA x 6' Hydraulic; Made in China
$RFQ
72" Width Birmingham H-0635-C NEW SHEAR, 8 GA x 6' Hydraulic; Made in China
NEW BIRMINGHAM 6' x 8 Ga. HEAVY DUTY HYDRAULIC SHEAR   MODEL: H-0635-C          MADE IN CHINA      SPECIFICATIONS: Cutting Capacity: Shearing Width:
49" Table 3HP Spindle GMC GMM-949V-PKG w/DRO, PF VERTICAL MILL, Made In Taiwan, with
$RFQ
49" Table 3HP Spindle GMC GMM-949V-PKG w/DRO, PF VERTICAL MILL, Made In Taiwan, with
NEW GMC Manual Knee Type Vertical Milling Machines          Model # GMM-949VPKG, Taiwan Mill               
  • Table width: 49"
  • Table length: 3"
    3" WIDTH Baileigh BG-679 BELT GRINDER, 220v 3-phase
    $RFQ
    3" WIDTH Baileigh BG-679 BELT GRINDER, 220v 3-phase
    NEW BAILEIGH 220V 3-PHASE BELT GRINDER MODEL:  BG-679 FEATURES: 6" belt width Dust collection system standard Sturdy triangular base 220V 3-phase SPECIFICATIONS: Belt size:&
    • Belt width: 3"
      56" Height 20" Width Cincinnati Cast Iron T-Slotted ANGLE PLATES
      $5,500
      56" Height 20" Width Cincinnati Cast Iron T-Slotted ANGLE PLATES
      CINCINNATI CAST IRON ANGLE PLATE   SINGLE PLATE ONLY - NOT A PAIR   SPECIFICATIONS: Height ..................................... 57" Width  ..................................... 19-1/2" De
      Kitamura Mycenter 1
      $23,000
      Kitamura Mycenter 1
      Kitamura Mycenter 1 light machining of plastic and small medical parts. Well maintained. Machine is under power and operates without any concerns. Purchased in 2000. Serial number 02779
      84" Width 120" Length Giddings Lewis Hyrdrostatic ROTARY TABLE, 50,000 lbs Capa
      $49,500
      84" Width 120" Length Giddings Lewis Hyrdrostatic ROTARY TABLE, 50,000 lbs Capa
      84" X 120" G&L HYDROSTATIC ROTARY TABLE  SPECIFICATIONS:TABLE SIZE ...................... 84" X 120"BASE SIZE ....................... 78" X 84"TABLE HEIGHT OVERALL ............
      • Diameter or width: 84"
      • Length: 120"
        0" Cap. 96" Width GMC HS-0810MD *Taiwan Made* NEW SHEAR, 8' x 10ga.; hydraulic;
        $RFQ
        0" Cap. 96" Width GMC HS-0810MD *Taiwan Made* NEW SHEAR, 8' x 10ga.; hydraulic;
        NEW "GMC" DELUXE HYDRAULIC SHEAR MODEL: HS-0810MD Made in Taiwan   STANDARD FEATURES: ISO 9001 certified HD all steel construction for maximum rigidity German logic quiet hydraulic system Adjustabl
        0" Cap. 72" Width GMC HS-0610MD *Taiwan Made* NEW SHEAR, 6' x 10ga.; hydraulic;
        $19,850
        0" Cap. 72" Width GMC HS-0610MD *Taiwan Made* NEW SHEAR, 6' x 10ga.; hydraulic;
        NEW "GMC" DELUXE HYDRAULIC SHEAR MODEL: HS-0610MD Made in Taiwan   STANDARD FEATURES: ISO 9001 certified HD all steel construction for maximum rigidity German logic quiet hydraulic system Adjustabl
        Jash 36" x 18" x 18" ANGLE PLATES
        $5,500
        Jash 36" x 18" x 18" ANGLE PLATES
        SET OF (2) 36" x 18" x 18" CAST IRON T-SLOTTED ANGLE PLATES SPECIFICATIONS: HEIGHT ........................ 36" DEPTH ......................... 18" WIDTH ......................... 18" EQUIPPED WITH: -
        63" Arm 17" Column Victor 1763H RADIAL DRILL, Spindle Stroke 14-9/16", 12 s
        $RFQ
        63" Arm 17" Column Victor 1763H RADIAL DRILL, Spindle Stroke 14-9/16", 12 s
        NEW VICTOR 17" x 63" RADIAL DRILL MODEL: 1763H SPECIFICATIONS Dimensions: Diameter of column:  17" Maximum distance (col./spl):  63" Minimum distance (col./spl)):  13
        • Arm length: 63'
        • Column diameter: 17"
          63" Arm 12" Column Victor 1363H RADIAL DRILL, Spindle Stroke 10.63", 12 spe
          $RFQ
          63" Arm 12" Column Victor 1363H RADIAL DRILL, Spindle Stroke 10.63", 12 spe
          NEW VICTOR 13" x 63" RADIAL DRILL MODEL: 1363 SPECIFICATIONS Dimensions: Diameter of column:  12.6" Maximum distance (col./spl):  63" Minimum distance (col./spl)):  1
          • Arm length: 63'
          • Column diameter: 12.6"
            49" Arm 11" Column Victor 1249H RADIAL DRILL, Spindle Stroke 10.63", 12 spe
            $RFQ
            49" Arm 11" Column Victor 1249H RADIAL DRILL, Spindle Stroke 10.63", 12 spe
            NEW VICTOR 12" x 49" RADIAL DRILL MODEL: 1249H SPECIFICATIONS Dimensions: Diameter of column:  11.81" Maximum distance (col./spl):  49.21" Minimum distance (col./spl)): &n
            • Arm length: 49.21'
            • Column diameter: 11.81"
              10" Arm 43" Column Victor 1043 RADIAL DRILL, Spindle Stroke 9", 12 speeds,
              $RFQ
              10" Arm 43" Column Victor 1043 RADIAL DRILL, Spindle Stroke 9", 12 speeds,
              NEW VICTOR 10" x 43" RADIAL DRILL MODEL: 1043 SPECIFICATIONS Dimensions: Diameter of column:  10.25" Maximum distance (col./spl):  43.31" Minimum distance (col./spl)): &nb
              • Arm length: 10.25'
              • Column diameter: 43.31"
                48" Arm 11" Column Victor 1148 RADIAL DRILL, Spindle Stroke 9-7/8", 12 spee
                $RFQ
                48" Arm 11" Column Victor 1148 RADIAL DRILL, Spindle Stroke 9-7/8", 12 spee
                NEW VICTOR 11" x 48" RADIAL DRILL MODEL: 1148 SPECIFICATIONS Dimensions: Diameter of column:  11.2" Maximum distance (col./spl):  48.5" Minimum distance (col./spl)):  
                • Arm length: 48.5'
                • Column diameter: 11.2"
                  37" Arm 8" Column Victor 837 RADIAL DRILL, Spindle Stroke 8.25", 6 speeds,
                  $RFQ
                  37" Arm 8" Column Victor 837 RADIAL DRILL, Spindle Stroke 8.25", 6 speeds,
                  NEW VICTOR 8" x 37" RADIAL DRILL MODEL: 837 SPECIFICATIONS Dimensions: Diameter of column:  8.25" Maximum distance (col./spl):  37.41" Minimum distance (col./spl)):  
                  • Arm length: 37.41'
                  • Column diameter: 8.25"
                    33" Arm 8" Column Victor 833 RADIAL DRILL, Spindle Stroke 8.25", 6 speeds,
                    $RFQ
                    33" Arm 8" Column Victor 833 RADIAL DRILL, Spindle Stroke 8.25", 6 speeds,
                    NEW VICTOR 8" x 33" RADIAL DRILL MODEL: 833 SPECIFICATIONS Dimensions: Diameter of column:  8.25" Maximum distance (col./spl):  33.5" Minimum distance (col./spl)):  8
                    • Arm length: 33.5'
                    • Column diameter: 8.25"
                      29" Arm 8" Column Victor 829 RADIAL DRILL, Spindle Stroke 8.25", 6 speeds,
                      $RFQ
                      29" Arm 8" Column Victor 829 RADIAL DRILL, Spindle Stroke 8.25", 6 speeds,
                      NEW VICTOR 8" x 29" RADIAL DRILL MODEL: 829 SPECIFICATIONS Dimensions: Diameter of column:  8.25" Maximum distance (col./spl):  29.5" Minimum distance (col./spl)):  8
                      • Arm length: 29.5'
                      • Column diameter: 8.25"
                        48" Width Falls 111 DEBURRER
                        $1,950
                        48" Width Falls 111 DEBURRER
                          Falls Model 111 D-Bur-R Sheet Metal Deburring Machine S/N 448   Imagine! Smooth peeled edges at 60 ft./min.! Falls Product's D-BUR-R removes sharp burrs fast. Five models give you the competitive edge.
                        • Maximum sheet width: 48"
                          78" Arm 17" Column Clausing CL2000H RADIAL DRILL
                          $RFQ
                          78" Arm 17" Column Clausing CL2000H RADIAL DRILL
                          NEW CLAUSING RADIAL DRILL 78" ARM, 39 x 31 x 19 TABLE, 7.5 HP MODEL: CL2000H SPECIFICATIONS: WORKING AREA:    Column Sleeve Dia.:       17"   
                          • Arm length: 78'
                          • Column diameter: 17"
                            49" Arm 11" Column Clausing CLC1250H RADIAL DRILL
                            $RFQ
                            49" Arm 11" Column Clausing CLC1250H RADIAL DRILL
                            NEW CLAUSING RADIAL DRILL 49" Arm, 25 x 20 x 16 Table, 2 3/8" Cap, 5.0 hp MODEL: CLC1250H     Clausing Radial Drill Features and Standard Equipment: Equipped with independent clamping unit. &n
                            • Arm length: 49.2'
                            • Column diameter: 11.81"
                              48" Arm 11" Column Clausing CL1230H RADIAL DRILL
                              $RFQ
                              48" Arm 11" Column Clausing CL1230H RADIAL DRILL
                              NEW CLAUSING RADIAL DRILL 48" ARM, 25 x 20 x 16 TABLE, 3 HP MODEL: CL1230H SPECIFICATIONS: WORKING AREA:    Column Sleeve Dia.:       11.81"  &nbs
                              • Arm length: 48'
                              • Column diameter: 11.81"
                                43" Arm 10" Column Clausing CL1100 RADIAL DRILL
                                $RFQ
                                43" Arm 10" Column Clausing CL1100 RADIAL DRILL
                                NEW CLAUSING RADIAL DRILL 43" ARM, 25 x 20 x 16 TABLE, 3 HP MODEL: CL1100 SPECIFICATIONS: WORKING AREA:    Column Sleeve Dia.:       10.24"   
                                • Arm length: 43'
                                • Column diameter: 10.24"
                                  Categories:
                                  Condition:
                                  • X Used (2219)
                                  Manufacturer:
                                  Location:
                                  • X New Jersey (2219)
                                  Price:
                                  •  to 
                                  <Prev | 19 | 20 | 21 | 22 | 23