NEW CLAUSING RADIAL DRILL
78" ARM, 39 x 31 x 19 TABLE, 7.5 HP
MODEL: CL2000H



SPECIFICATIONS:

WORKING AREA:
   Column Sleeve Dia.:       17"
    Column Face to Spindle Center:
                                 Maximum:     78.7"
                                 Minimum:     19.3"
    Spindle Head Travel:       59.4"
    Base Surface to Spindle End:
                                 Maximum:     74.8"
                                 Minimum:     19.7"
    Arm Vertical Travel:       43.3"
    Arm Rotation (Right & Left):    180 degrees
    Baseplate Working Surface:    55.3" x 38.6"
    Box Table Area:
                       Length:       39.3"
                       Width:       31.5"
                       Height:       19.7"
    Base Dimensions:
                       Floor Area:    114.5" x 43.3"
                       Height:       9.84"

CAPACITIES:
   Drilling        In Steel       2.6"
                     In Cast Iron    2.75"
    Tapping     In Steel         1.97"
                     In Cast Iron    2.36"
   Boring        In Steel       5"
                In Cast Iron    7.28"

DRILLING HEAD:
   Spindle Taper:       5MT
    Spindle Stroke:       14.6"
    Quill Diameter       3.94"
    Number of Spindle Speeds:    12
    Spindle Speeds (rpm):    35-1890
    Number of Feeds:    6
    Spindle Feed Rate (in/rev.):    0.003-0.0038"
    Spindle Drive Motor:    7.5 hp
    Elevating Motor:    3 hp
    Clamping Motor:    1 hp
    Coolant Pump Motor:    1/8 hp

OVERALL MEASUREMENTS:
   Maximum Machine Height:    124.8"
    Base & Column Height:       116.5"
    Shipping Dimensions (L x W x H):    122.2" x 55.1" x 127.5"


STANDARD FEATURES & EQUIPMENT:

-Equipped with hydraulic SEPARATE clamping unit.  Vertical movement of the arm is coordinated by an IC Timer.
With a single touch on the push button switch, you can have arm unclamped then move vertically, or stop then clamp
automatically.  Very easy to operate and tools will always stay at the same point after tool shifting.
-Gears are cooled by an oil pump to minimize gear wear.
-Friction type disc clutch absorbs impact force caused by vertical movement of spindle and protects all transmission
units inside gear-box.  With quick spindle return, the clutch will help speed-up the tapping operation.
-Special automatic tool eject device is supplied to allow you to change tools quickly (No drifter is required).
-Special arm elevating device is provided to prevent arm from dropping abruptly after years of usage.
-Coolant System
-Tool kit and manuals


OPTIONAL EQUIPMENT (CALL FOR PRICING):

-Large Table, 32 x 28 x 24
-Small Tilt Table, 20 x 20 x 23


WARRANTY:

Clausing warrantees the machine and control for a period of one year from the date of installation. This warranty does not
cover normal wear items such as filters and belts or damage that results from the misuse or abuse of this equipment.

**Due to continual improvements, prices and specifications subject to change without notice**






FOR MORE INFORMATION: Call Terry at 973-497-7612

This machine is listed for sale by Machinery Values Inc. located in Harrison, New Jersey